From: Dave Stevenson <dave.stevenson@raspberrypi.com>
To: paul.j.murphy@intel.com, daniele.alessandrelli@intel.com,
linux-media@vger.kernel.org
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH 14/16] media: i2c: ov9282: Add support for 1280x800 and 640x400 modes
Date: Wed, 5 Oct 2022 16:28:07 +0100 [thread overview]
Message-ID: <20221005152809.3785786-15-dave.stevenson@raspberrypi.com> (raw)
In-Reply-To: <20221005152809.3785786-1-dave.stevenson@raspberrypi.com>
Adds register settings for additional modes.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/media/i2c/ov9282.c | 97 ++++++++++++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
index d892f53fb1ea..ec1599488f21 100644
--- a/drivers/media/i2c/ov9282.c
+++ b/drivers/media/i2c/ov9282.c
@@ -251,6 +251,37 @@ struct ov9282_reg_list common_regs_list = {
};
/* Sensor mode registers */
+static const struct ov9282_reg mode_1280x800_regs[] = {
+ {0x3778, 0x00},
+ {0x3800, 0x00},
+ {0x3801, 0x00},
+ {0x3802, 0x00},
+ {0x3803, 0x00},
+ {0x3804, 0x05},
+ {0x3805, 0x0f},
+ {0x3806, 0x03},
+ {0x3807, 0x2f},
+ {0x3808, 0x05},
+ {0x3809, 0x00},
+ {0x380a, 0x03},
+ {0x380b, 0x20},
+ {0x3810, 0x00},
+ {0x3811, 0x08},
+ {0x3812, 0x00},
+ {0x3813, 0x08},
+ {0x3814, 0x11},
+ {0x3815, 0x11},
+ {0x3820, 0x40},
+ {0x3821, 0x00},
+ {0x4003, 0x40},
+ {0x4008, 0x04},
+ {0x4009, 0x0b},
+ {0x400c, 0x00},
+ {0x400d, 0x07},
+ {0x4507, 0x00},
+ {0x4509, 0x00},
+};
+
static const struct ov9282_reg mode_1280x720_regs[] = {
{0x3778, 0x00},
{0x3800, 0x00},
@@ -282,6 +313,36 @@ static const struct ov9282_reg mode_1280x720_regs[] = {
{0x4509, 0x80},
};
+static const struct ov9282_reg mode_640x400_regs[] = {
+ {0x3778, 0x10},
+ {0x3800, 0x00},
+ {0x3801, 0x00},
+ {0x3802, 0x00},
+ {0x3803, 0x00},
+ {0x3804, 0x05},
+ {0x3805, 0x0f},
+ {0x3806, 0x03},
+ {0x3807, 0x2f},
+ {0x3808, 0x02},
+ {0x3809, 0x80},
+ {0x380a, 0x01},
+ {0x380b, 0x90},
+ {0x3810, 0x00},
+ {0x3811, 0x04},
+ {0x3812, 0x00},
+ {0x3813, 0x04},
+ {0x3814, 0x31},
+ {0x3815, 0x22},
+ {0x3820, 0x60},
+ {0x3821, 0x01},
+ {0x4008, 0x02},
+ {0x4009, 0x05},
+ {0x400c, 0x00},
+ {0x400d, 0x03},
+ {0x4507, 0x03},
+ {0x4509, 0x80},
+};
+
/* Supported sensor mode configurations */
static const struct ov9282_mode supported_modes[] = {
{
@@ -306,6 +367,42 @@ static const struct ov9282_mode supported_modes[] = {
.num_of_regs = ARRAY_SIZE(mode_1280x720_regs),
.regs = mode_1280x720_regs,
},
+ }, {
+ .width = 1280,
+ .height = 800,
+ .hblank_min = { 250, 176 },
+ .vblank = 1022,
+ .vblank_min = 110,
+ .vblank_max = 51540,
+ .link_freq_idx = 0,
+ .crop = {
+ .left = OV9282_PIXEL_ARRAY_LEFT,
+ .top = OV9282_PIXEL_ARRAY_TOP,
+ .width = 1280,
+ .height = 800
+ },
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mode_1280x800_regs),
+ .regs = mode_1280x800_regs,
+ },
+ }, {
+ .width = 640,
+ .height = 400,
+ .hblank_min = { 890, 816 },
+ .vblank = 1022,
+ .vblank_min = 22,
+ .vblank_max = 51540,
+ .link_freq_idx = 0,
+ .crop = {
+ .left = OV9282_PIXEL_ARRAY_LEFT,
+ .top = OV9282_PIXEL_ARRAY_TOP,
+ .width = 1280,
+ .height = 800
+ },
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mode_640x400_regs),
+ .regs = mode_640x400_regs,
+ },
},
};
--
2.34.1
next prev parent reply other threads:[~2022-10-05 15:29 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-05 15:27 [PATCH 00/16] Updates to ov9282 sensor driver Dave Stevenson
2022-10-05 15:27 ` [PATCH 01/16] media: i2c: ov9282: Remove duplication of registers Dave Stevenson
2022-10-06 9:14 ` Jacopo Mondi
2022-10-05 15:27 ` [PATCH 02/16] media: i2c: ov9282: Split registers into common and mode specific Dave Stevenson
2022-10-06 9:15 ` Jacopo Mondi
2022-10-05 15:27 ` [PATCH 03/16] media: i2c: ov9282: Remove format code from the mode Dave Stevenson
2022-10-06 9:15 ` Jacopo Mondi
2022-10-05 15:27 ` [PATCH 04/16] media: i2c: ov9282: Remove pixel rate from mode definition Dave Stevenson
2022-10-06 9:17 ` Jacopo Mondi
2022-10-06 11:51 ` Dave Stevenson
2022-10-05 15:27 ` [PATCH 05/16] media: i2c: ov9281: Support more than 1 mode Dave Stevenson
2022-10-06 9:18 ` Jacopo Mondi
2022-10-26 7:22 ` Sakari Ailus
2022-10-05 15:27 ` [PATCH 06/16] media: i2c: ov9282: Correct HTS register for configured pixel rate Dave Stevenson
2022-10-06 9:23 ` Jacopo Mondi
2022-10-06 13:01 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 07/16] media: i2c: ov9282: Reduce vblank_min values based on testing Dave Stevenson
2022-10-06 11:56 ` Jacopo Mondi
2022-10-06 13:02 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 08/16] media: i2c: ov9282: Add selection for CSI2 clock mode Dave Stevenson
2022-10-06 9:24 ` Jacopo Mondi
2022-10-26 7:21 ` Sakari Ailus
2022-10-28 12:57 ` Dave Stevenson
2022-10-28 14:30 ` Sakari Ailus
2022-10-28 15:03 ` Dave Stevenson
2022-10-31 13:06 ` Sakari Ailus
2022-10-05 15:28 ` [PATCH 09/16] media: i2c: ov9282: Add the properties from fwnode Dave Stevenson
2022-10-06 11:57 ` Jacopo Mondi
2022-10-05 15:28 ` [PATCH 10/16] media: i2c: ov9282: Action CID_VBLANK when set Dave Stevenson
2022-10-06 9:29 ` Jacopo Mondi
2022-10-06 13:21 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 11/16] media: i2c: ov9282: Add HFLIP and VFLIP support Dave Stevenson
2022-10-06 9:38 ` Jacopo Mondi
2022-10-06 14:21 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 12/16] media: i2c: ov9282: Make V4L2_CID_HBLANK r/w Dave Stevenson
2022-10-06 9:41 ` Jacopo Mondi
2022-10-06 11:33 ` Dave Stevenson
2022-10-06 11:53 ` Jacopo Mondi
2022-10-05 15:28 ` [PATCH 13/16] media: i2c: ov9282: Add selection API calls for cropping info Dave Stevenson
2022-10-06 9:43 ` Jacopo Mondi
2022-10-06 11:39 ` Dave Stevenson
2022-10-06 11:54 ` Jacopo Mondi
2022-10-05 15:28 ` Dave Stevenson [this message]
2022-10-06 9:48 ` [PATCH 14/16] media: i2c: ov9282: Add support for 1280x800 and 640x400 modes Jacopo Mondi
2022-10-06 11:46 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 15/16] media: i2c: ov9282: Add support for 8bit readout Dave Stevenson
2022-10-06 9:57 ` Jacopo Mondi
2022-10-06 12:20 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 16/16] media: i2c: ov9282: Support event handlers Dave Stevenson
2022-10-06 9:59 ` Jacopo Mondi
2022-10-07 10:22 ` Dave Stevenson
2022-10-07 12:57 ` Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221005152809.3785786-15-dave.stevenson@raspberrypi.com \
--to=dave.stevenson@raspberrypi.com \
--cc=daniele.alessandrelli@intel.com \
--cc=linux-media@vger.kernel.org \
--cc=paul.j.murphy@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox