Linux Media Controller development
 help / color / mirror / Atom feed
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
To: paul.j.murphy@intel.com, daniele.alessandrelli@intel.com,
	linux-media@vger.kernel.org
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH 07/16] media: i2c: ov9282: Reduce vblank_min values based on testing
Date: Wed,  5 Oct 2022 16:28:00 +0100	[thread overview]
Message-ID: <20221005152809.3785786-8-dave.stevenson@raspberrypi.com> (raw)
In-Reply-To: <20221005152809.3785786-1-dave.stevenson@raspberrypi.com>

The configured vblank_min setting of 250 (meaning VTS of
720 + 250 = 970) is far higher than the setting that works on
the sensor, and there are no obvious restrictions stated in the
datasheet.

Reduce the vblank_min to allow for faster frame rates.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/media/i2c/ov9282.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
index 1cd6cb4addfb..abb1223c0260 100644
--- a/drivers/media/i2c/ov9282.c
+++ b/drivers/media/i2c/ov9282.c
@@ -268,7 +268,7 @@ static const struct ov9282_mode supported_modes[] = {
 		.height = 720,
 		.hblank = 250,
 		.vblank = 1022,
-		.vblank_min = 151,
+		.vblank_min = 41,
 		.vblank_max = 51540,
 		.link_freq_idx = 0,
 		.reg_list = {
-- 
2.34.1


  parent reply	other threads:[~2022-10-05 15:28 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-05 15:27 [PATCH 00/16] Updates to ov9282 sensor driver Dave Stevenson
2022-10-05 15:27 ` [PATCH 01/16] media: i2c: ov9282: Remove duplication of registers Dave Stevenson
2022-10-06  9:14   ` Jacopo Mondi
2022-10-05 15:27 ` [PATCH 02/16] media: i2c: ov9282: Split registers into common and mode specific Dave Stevenson
2022-10-06  9:15   ` Jacopo Mondi
2022-10-05 15:27 ` [PATCH 03/16] media: i2c: ov9282: Remove format code from the mode Dave Stevenson
2022-10-06  9:15   ` Jacopo Mondi
2022-10-05 15:27 ` [PATCH 04/16] media: i2c: ov9282: Remove pixel rate from mode definition Dave Stevenson
2022-10-06  9:17   ` Jacopo Mondi
2022-10-06 11:51     ` Dave Stevenson
2022-10-05 15:27 ` [PATCH 05/16] media: i2c: ov9281: Support more than 1 mode Dave Stevenson
2022-10-06  9:18   ` Jacopo Mondi
2022-10-26  7:22   ` Sakari Ailus
2022-10-05 15:27 ` [PATCH 06/16] media: i2c: ov9282: Correct HTS register for configured pixel rate Dave Stevenson
2022-10-06  9:23   ` Jacopo Mondi
2022-10-06 13:01     ` Dave Stevenson
2022-10-05 15:28 ` Dave Stevenson [this message]
2022-10-06 11:56   ` [PATCH 07/16] media: i2c: ov9282: Reduce vblank_min values based on testing Jacopo Mondi
2022-10-06 13:02     ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 08/16] media: i2c: ov9282: Add selection for CSI2 clock mode Dave Stevenson
2022-10-06  9:24   ` Jacopo Mondi
2022-10-26  7:21   ` Sakari Ailus
2022-10-28 12:57     ` Dave Stevenson
2022-10-28 14:30       ` Sakari Ailus
2022-10-28 15:03         ` Dave Stevenson
2022-10-31 13:06           ` Sakari Ailus
2022-10-05 15:28 ` [PATCH 09/16] media: i2c: ov9282: Add the properties from fwnode Dave Stevenson
2022-10-06 11:57   ` Jacopo Mondi
2022-10-05 15:28 ` [PATCH 10/16] media: i2c: ov9282: Action CID_VBLANK when set Dave Stevenson
2022-10-06  9:29   ` Jacopo Mondi
2022-10-06 13:21     ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 11/16] media: i2c: ov9282: Add HFLIP and VFLIP support Dave Stevenson
2022-10-06  9:38   ` Jacopo Mondi
2022-10-06 14:21     ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 12/16] media: i2c: ov9282: Make V4L2_CID_HBLANK r/w Dave Stevenson
2022-10-06  9:41   ` Jacopo Mondi
2022-10-06 11:33     ` Dave Stevenson
2022-10-06 11:53       ` Jacopo Mondi
2022-10-05 15:28 ` [PATCH 13/16] media: i2c: ov9282: Add selection API calls for cropping info Dave Stevenson
2022-10-06  9:43   ` Jacopo Mondi
2022-10-06 11:39     ` Dave Stevenson
2022-10-06 11:54       ` Jacopo Mondi
2022-10-05 15:28 ` [PATCH 14/16] media: i2c: ov9282: Add support for 1280x800 and 640x400 modes Dave Stevenson
2022-10-06  9:48   ` Jacopo Mondi
2022-10-06 11:46     ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 15/16] media: i2c: ov9282: Add support for 8bit readout Dave Stevenson
2022-10-06  9:57   ` Jacopo Mondi
2022-10-06 12:20     ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 16/16] media: i2c: ov9282: Support event handlers Dave Stevenson
2022-10-06  9:59   ` Jacopo Mondi
2022-10-07 10:22     ` Dave Stevenson
2022-10-07 12:57       ` Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221005152809.3785786-8-dave.stevenson@raspberrypi.com \
    --to=dave.stevenson@raspberrypi.com \
    --cc=daniele.alessandrelli@intel.com \
    --cc=linux-media@vger.kernel.org \
    --cc=paul.j.murphy@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox