Linux Media Controller development
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Cc: "Yan, Dongcheng" <dongcheng.yan@intel.com>,
	Mehdi Djait <mehdi.djait@linux.intel.com>,
	"Yu, Ong Hock" <ong.hock.yu@intel.com>,
	"Ng, Khai Wen" <khai.wen.ng@intel.com>,
	Antti Laakso <antti.laakso@linux.intel.com>,
	"Bajpai, Manik" <manik.bajpai@intel.com>,
	Divyamani Tripathi <divyamani.tripathi@intel.com>,
	"Sapre, Sarang" <sarang.sapre@intel.com>,
	"Yao, Hao" <hao.yao@intel.com>
Subject: [PATCH 5/5] media: ipu6: Return errors from stream stop and close
Date: Thu,  8 Oct 2026 11:52:47 +0300	[thread overview]
Message-ID: <20261008085247.798156-6-sakari.ailus@linux.intel.com> (raw)
In-Reply-To: <20261008085247.798156-1-sakari.ailus@linux.intel.com>

If the firmware fails to start, stop or close a stream, either by telling
about it with an error or due to a timeout, it probably requires a reset
before being operational again. Mark isys needing a reset in such cases.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 .../media/pci/intel/ipu6/ipu6-isys-video.c    | 55 ++++++++++++++-----
 .../media/pci/intel/ipu6/ipu6-isys-video.h    |  4 +-
 2 files changed, 43 insertions(+), 16 deletions(-)

diff --git a/drivers/media/pci/intel/ipu6/ipu6-isys-video.c b/drivers/media/pci/intel/ipu6/ipu6-isys-video.c
index 44541aff79b3..799a4be3160b 100644
--- a/drivers/media/pci/intel/ipu6/ipu6-isys-video.c
+++ b/drivers/media/pci/intel/ipu6/ipu6-isys-video.c
@@ -543,25 +543,31 @@ int ipu6_isys_start_stream_firmware(struct ipu6_isys_stream *stream,
 out_stream_close:
 	reinit_completion(&stream->stream_close_completion);
 
+	scoped_guard(mutex, &stream->isys->mutex)
+		stream->isys->need_reset = true;
+
 	retout = fw_ops->stream_close(stream->isys, stream->stream_handle);
 	if (retout < 0) {
 		dev_dbg(dev, "can't close stream (%d)\n", retout);
-		return retout;
+		return ret;
 	}
 
 	tout = wait_for_completion_timeout(&stream->stream_close_completion,
 					   IPU6_FW_CALL_TIMEOUT_JIFFIES);
-	if (!tout)
+	if (!tout) {
 		dev_err(dev, "stream close time out\n");
-	else if (stream->error)
+		ret = -ETIMEDOUT;
+	} else if (stream->error) {
 		dev_err(dev, "stream close error: %d\n", stream->error);
-	else
+		ret = -EINVAL;
+	} else {
 		dev_dbg(dev, "stream close complete\n");
+	}
 
 	return ret;
 }
 
-void ipu6_isys_stop_stream_firmware(struct ipu6_isys_stream *stream)
+int ipu6_isys_stop_stream_firmware(struct ipu6_isys_stream *stream)
 {
 	struct ipu6_bus_device *adev = stream->asd->isys->adev;
 	const struct ipu6_fw_isys_ops *fw_ops = adev->auxdrv_data->fw_ops;
@@ -573,20 +579,30 @@ void ipu6_isys_stop_stream_firmware(struct ipu6_isys_stream *stream)
 	ret = fw_ops->stream_flush(stream->isys, stream->stream_handle);
 	if (ret < 0) {
 		dev_err(dev, "can't stop stream (%d)\n", ret);
-		return;
+		return -EBUSY;
 	}
 
 	tout = wait_for_completion_timeout(&stream->stream_stop_completion,
 					   IPU6_FW_CALL_TIMEOUT_JIFFIES);
-	if (!tout)
+	if (!tout) {
 		dev_warn(dev, "stream stop time out\n");
-	else if (stream->error)
+		ret = -ETIMEDOUT;
+	} else if (stream->error) {
 		dev_warn(dev, "stream stop error: %d\n", stream->error);
-	else
+		ret = -EINVAL;
+	} else{
 		dev_dbg(dev, "stop stream: complete\n");
+	}
+
+	if (ret) {
+		scoped_guard(mutex, &stream->isys->mutex)
+			stream->isys->need_reset = true;
+	}
+
+	return ret;
 }
 
-void ipu6_isys_close_stream_firmware(struct ipu6_isys_stream *stream)
+int ipu6_isys_close_stream_firmware(struct ipu6_isys_stream *stream)
 {
 	struct ipu6_bus_device *adev = stream->asd->isys->adev;
 	const struct ipu6_fw_isys_ops *fw_ops = adev->auxdrv_data->fw_ops;
@@ -599,22 +615,33 @@ void ipu6_isys_close_stream_firmware(struct ipu6_isys_stream *stream)
 	ret = fw_ops->stream_close(stream->isys, stream->stream_handle);
 	if (ret < 0) {
 		dev_err(dev, "can't close stream (%d)\n", ret);
-		return;
+		goto out_cleanup;
 	}
 
 	tout = wait_for_completion_timeout(&stream->stream_close_completion,
 					   IPU6_FW_CALL_TIMEOUT_JIFFIES);
-	if (!tout)
+	if (!tout) {
 		dev_warn(dev, "stream close time out\n");
-	else if (stream->error)
+		ret = -ETIMEDOUT;
+	} else if (stream->error) {
 		dev_warn(dev, "stream close error: %d\n", stream->error);
-	else
+		ret = -EINVAL;
+	} else {
 		dev_dbg(dev, "close stream: complete\n");
+	}
 
+out_cleanup:
 	scoped_guard(spinlock_irqsave, &stream->isys->streams_lock) {
 		stream->isys->streams_by_handle[stream->stream_handle] = NULL;
 		csi2->streams_by_vc[stream->vc] = NULL;
 	}
+
+	if (ret) {
+		scoped_guard(mutex, &stream->isys->mutex)
+			stream->isys->need_reset = true;
+	}
+
+	return ret;
 }
 
 struct ipu6_isys_stream *
diff --git a/drivers/media/pci/intel/ipu6/ipu6-isys-video.h b/drivers/media/pci/intel/ipu6/ipu6-isys-video.h
index 2821b9b1b943..2ab6f32716ad 100644
--- a/drivers/media/pci/intel/ipu6/ipu6-isys-video.h
+++ b/drivers/media/pci/intel/ipu6/ipu6-isys-video.h
@@ -99,8 +99,8 @@ int ipu6_isys_fw_pins_prepare(struct ipu6_isys_stream *stream,
 int ipu6_isys_start_stream_firmware(struct ipu6_isys_stream *stream,
 				    struct ipu6_isys_buffer_list *bl,
 				    struct v4l2_mbus_frame_desc *desc);
-void ipu6_isys_stop_stream_firmware(struct ipu6_isys_stream *stream);
-void ipu6_isys_close_stream_firmware(struct ipu6_isys_stream *stream);
+int ipu6_isys_stop_stream_firmware(struct ipu6_isys_stream *stream);
+int ipu6_isys_close_stream_firmware(struct ipu6_isys_stream *stream);
 struct ipu6_isys_stream *
 ipu6_isys_find_stream_firmware(struct ipu6_isys_csi2 *csi2, u8 vc);
 void ipu6_isys_free_stream_firmware(struct ipu6_isys_stream *stream);
-- 
2.47.3


      parent reply	other threads:[~2026-10-08  8:55 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-08  8:52 [PATCH 0/5] IPU reset workaround changes Sakari Ailus
2026-10-08  8:52 ` [PATCH 1/5] media: ipu6: Don't mark need_reset based on returned buffers Sakari Ailus
2026-10-08  8:52 ` [PATCH 2/5] media: ipu6: Tell about not being able to obtain frame descriptor Sakari Ailus
2026-10-09 11:11   ` Antti Laakso
2026-10-09 11:20     ` Sakari Ailus
2026-10-08  8:52 ` [PATCH 3/5] media: ipu6: Prevent starting streaming if ISYS needs reset Sakari Ailus
2026-10-09 10:59   ` Antti Laakso
2026-10-09 11:16     ` Sakari Ailus
2026-10-08  8:52 ` [PATCH 4/5] media: ipu6: Remove need_reset check from video device open Sakari Ailus
2026-10-08  8:52 ` Sakari Ailus [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261008085247.798156-6-sakari.ailus@linux.intel.com \
    --to=sakari.ailus@linux.intel.com \
    --cc=antti.laakso@linux.intel.com \
    --cc=divyamani.tripathi@intel.com \
    --cc=dongcheng.yan@intel.com \
    --cc=hao.yao@intel.com \
    --cc=khai.wen.ng@intel.com \
    --cc=linux-media@vger.kernel.org \
    --cc=manik.bajpai@intel.com \
    --cc=mehdi.djait@linux.intel.com \
    --cc=ong.hock.yu@intel.com \
    --cc=sarang.sapre@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox