From: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
To: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Tianshu Qiu <tian.shu.qiu@intel.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
David Heidelberg <david@ixit.cz>,
20260414-imx355-24mhz-v1-1-9ae77bc6e7ec@ixit.cz
Subject: Re: [PATCH 05/13] media: imx355: Set register LINE_LENGTH_PCK programmatically
Date: Thu, 7 May 2026 16:09:46 +0200 [thread overview]
Message-ID: <afycja3nlkEFSPeU@zed> (raw)
In-Reply-To: <20260506-media-imx355-v1-5-660685030455@raspberrypi.com>
Hi Dave
On Wed, May 06, 2026 at 07:23:43PM +0100, Dave Stevenson wrote:
> The driver already has the LLP value stored in the mode structure,
> but also had the same value set via register writes in the mode's
> register list. Remove this duplication.
Moving stuff from register data tables to modes is .. better for sure.
You know.. freely configurable etc etc
But this is an improvement, so...
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
>
> This can't be implemented via a s_ctrl handler for V4L2_CID_HBLANK
> as __v4l2_ctrl_handler_setup doesn't call s_ctrl for read only
> controls.
Kind of unrelated, but I wonder if imx355_set_ctrl() doesn't actually
get called for hblank but the error simply goes ignored. The real
solution here would be to initialize the hblank control with a NULL
control handler.
>
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> ---
> ---
> drivers/media/i2c/imx355.c | 38 ++++++++++----------------------------
> 1 file changed, 10 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/media/i2c/imx355.c b/drivers/media/i2c/imx355.c
> index 589bad6c58e4..56a82f37709e 100644
> --- a/drivers/media/i2c/imx355.c
> +++ b/drivers/media/i2c/imx355.c
> @@ -34,6 +34,9 @@
> #define IMX355_REG_FLL 0x0340
> #define IMX355_FLL_MAX 0xffff
>
> +#define IMX355_REG_LLP 0x0342
> +#define IMX355_LLP_MAX 0xffff
> +
> #define IMX355_REG_X_ADD_START 0x0344
> #define IMX355_REG_Y_ADD_START 0x0346
> #define IMX355_REG_X_ADD_END 0x0348
> @@ -266,8 +269,6 @@ static const struct imx355_reg_list imx355_global_setting = {
> };
>
> static const struct imx355_reg mode_3268x2448_regs[] = {
> - { 0x0342, 0x0e },
> - { 0x0343, 0x58 },
> { 0x0900, 0x00 },
> { 0x0901, 0x11 },
> { 0x0902, 0x00 },
> @@ -276,8 +277,6 @@ static const struct imx355_reg mode_3268x2448_regs[] = {
> };
>
> static const struct imx355_reg mode_3264x2448_regs[] = {
> - { 0x0342, 0x0e },
> - { 0x0343, 0x58 },
> { 0x0900, 0x00 },
> { 0x0901, 0x11 },
> { 0x0902, 0x00 },
> @@ -286,8 +285,6 @@ static const struct imx355_reg mode_3264x2448_regs[] = {
> };
>
> static const struct imx355_reg mode_3280x2464_regs[] = {
> - { 0x0342, 0x0e },
> - { 0x0343, 0x58 },
> { 0x0900, 0x00 },
> { 0x0901, 0x11 },
> { 0x0902, 0x00 },
> @@ -296,8 +293,6 @@ static const struct imx355_reg mode_3280x2464_regs[] = {
> };
>
> static const struct imx355_reg mode_1940x1096_regs[] = {
> - { 0x0342, 0x0e },
> - { 0x0343, 0x58 },
> { 0x0900, 0x00 },
> { 0x0901, 0x11 },
> { 0x0902, 0x00 },
> @@ -306,8 +301,6 @@ static const struct imx355_reg mode_1940x1096_regs[] = {
> };
>
> static const struct imx355_reg mode_1936x1096_regs[] = {
> - { 0x0342, 0x0e },
> - { 0x0343, 0x58 },
> { 0x0900, 0x00 },
> { 0x0901, 0x11 },
> { 0x0902, 0x00 },
> @@ -316,8 +309,6 @@ static const struct imx355_reg mode_1936x1096_regs[] = {
> };
>
> static const struct imx355_reg mode_1924x1080_regs[] = {
> - { 0x0342, 0x0e },
> - { 0x0343, 0x58 },
> { 0x0900, 0x00 },
> { 0x0901, 0x11 },
> { 0x0902, 0x00 },
> @@ -326,8 +317,6 @@ static const struct imx355_reg mode_1924x1080_regs[] = {
> };
>
> static const struct imx355_reg mode_1920x1080_regs[] = {
> - { 0x0342, 0x0e },
> - { 0x0343, 0x58 },
> { 0x0900, 0x00 },
> { 0x0901, 0x11 },
> { 0x0902, 0x00 },
> @@ -336,8 +325,6 @@ static const struct imx355_reg mode_1920x1080_regs[] = {
> };
>
> static const struct imx355_reg mode_1640x1232_regs[] = {
> - { 0x0342, 0x07 },
> - { 0x0343, 0x2c },
> { 0x0900, 0x01 },
> { 0x0901, 0x22 },
> { 0x0902, 0x00 },
> @@ -346,8 +333,6 @@ static const struct imx355_reg mode_1640x1232_regs[] = {
> };
>
> static const struct imx355_reg mode_1640x922_regs[] = {
> - { 0x0342, 0x07 },
> - { 0x0343, 0x2c },
> { 0x0900, 0x01 },
> { 0x0901, 0x22 },
> { 0x0902, 0x00 },
> @@ -356,8 +341,6 @@ static const struct imx355_reg mode_1640x922_regs[] = {
> };
>
> static const struct imx355_reg mode_1300x736_regs[] = {
> - { 0x0342, 0x07 },
> - { 0x0343, 0x2c },
> { 0x0900, 0x01 },
> { 0x0901, 0x22 },
> { 0x0902, 0x00 },
> @@ -366,8 +349,6 @@ static const struct imx355_reg mode_1300x736_regs[] = {
> };
>
> static const struct imx355_reg mode_1296x736_regs[] = {
> - { 0x0342, 0x07 },
> - { 0x0343, 0x2c },
> { 0x0900, 0x01 },
> { 0x0901, 0x22 },
> { 0x0902, 0x00 },
> @@ -376,8 +357,6 @@ static const struct imx355_reg mode_1296x736_regs[] = {
> };
>
> static const struct imx355_reg mode_1284x720_regs[] = {
> - { 0x0342, 0x07 },
> - { 0x0343, 0x2c },
> { 0x0900, 0x01 },
> { 0x0901, 0x22 },
> { 0x0902, 0x00 },
> @@ -386,8 +365,6 @@ static const struct imx355_reg mode_1284x720_regs[] = {
> };
>
> static const struct imx355_reg mode_1280x720_regs[] = {
> - { 0x0342, 0x07 },
> - { 0x0343, 0x2c },
> { 0x0900, 0x01 },
> { 0x0901, 0x22 },
> { 0x0902, 0x00 },
> @@ -396,8 +373,6 @@ static const struct imx355_reg mode_1280x720_regs[] = {
> };
>
> static const struct imx355_reg mode_820x616_regs[] = {
> - { 0x0342, 0x0e },
> - { 0x0343, 0x58 },
> { 0x0900, 0x01 },
> { 0x0901, 0x44 },
> { 0x0902, 0x00 },
> @@ -1041,6 +1016,13 @@ static int imx355_start_streaming(struct imx355 *imx355)
> if (ret)
> return ret;
>
> + /* set line length */
> + ret = imx355_write_reg(imx355, IMX355_REG_LLP,
> + imx355->hblank->val + imx355->cur_mode->width,
> + 2);
> + if (ret)
> + return ret;
> +
> /* Apply customized values from user */
> ret = __v4l2_ctrl_handler_setup(imx355->sd.ctrl_handler);
> if (ret)
>
> --
> 2.34.1
>
>
next prev parent reply other threads:[~2026-05-07 14:09 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-06 18:23 [PATCH 00/13] media/imx355: General code cleanups, and adding support for 2 lane operation Dave Stevenson
2026-05-06 18:23 ` [PATCH 01/13] media: imx355: Remove duplicated registers from the mode tables Dave Stevenson
2026-05-07 13:41 ` Jacopo Mondi
2026-05-06 18:23 ` [PATCH 02/13] media: imx355: Remove setting FRM_LENGTH_LINES in the mode regs Dave Stevenson
2026-05-07 13:50 ` Jacopo Mondi
2026-05-06 18:23 ` [PATCH 03/13] media: imx355: Programmatically set the crop parameters for each mode Dave Stevenson
2026-05-07 14:00 ` Jacopo Mondi
2026-05-07 16:01 ` Dave Stevenson
2026-05-06 18:23 ` [PATCH 04/13] media: imx355: Remove the duplication between width/height and x/y_out_size Dave Stevenson
2026-05-06 18:23 ` [PATCH 05/13] media: imx355: Set register LINE_LENGTH_PCK programmatically Dave Stevenson
2026-05-07 14:09 ` Jacopo Mondi [this message]
2026-05-07 15:18 ` Dave Stevenson
2026-05-06 18:23 ` [PATCH 06/13] media: imx355: Set binning mode registers programmatically Dave Stevenson
2026-05-07 14:12 ` Jacopo Mondi
2026-05-06 18:23 ` [PATCH 07/13] media: imx355: Remove link_freq_index from each mode as ununsed Dave Stevenson
2026-05-07 14:12 ` Jacopo Mondi
2026-05-06 18:23 ` [PATCH 08/13] media: imx355: pixel_rate never changes, so don't recompute Dave Stevenson
2026-05-07 14:13 ` Jacopo Mondi
2026-05-06 18:23 ` [PATCH 09/13] media: imx355: Remove redundant fll_min, and implement fixed offset Dave Stevenson
2026-05-07 14:29 ` Jacopo Mondi
2026-05-07 15:21 ` Dave Stevenson
2026-05-06 18:23 ` [PATCH 10/13] media: imx355: Add support for get_selection Dave Stevenson
2026-05-07 14:42 ` Jacopo Mondi
2026-05-07 15:02 ` Dave Stevenson
2026-05-06 18:23 ` [PATCH 11/13] media: imx355: Use pm_runtime autosuspend_delay Dave Stevenson
2026-05-07 14:43 ` Jacopo Mondi
2026-05-06 18:23 ` [PATCH 12/13] media: imx355: Convert to new CCI register access helpers Dave Stevenson
2026-05-07 14:49 ` Jacopo Mondi
2026-05-06 18:23 ` [PATCH 13/13] media: imx355: Support 2 lane readout Dave Stevenson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=afycja3nlkEFSPeU@zed \
--to=jacopo.mondi@ideasonboard.com \
--cc=20260414-imx355-24mhz-v1-1-9ae77bc6e7ec@ixit.cz \
--cc=dave.stevenson@raspberrypi.com \
--cc=david@ixit.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=tian.shu.qiu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox