From: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
To: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Tianshu Qiu <tian.shu.qiu@intel.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
David Heidelberg <david@ixit.cz>,
20260414-imx355-24mhz-v1-1-9ae77bc6e7ec@ixit.cz
Subject: Re: [PATCH 06/13] media: imx355: Set binning mode registers programmatically
Date: Thu, 7 May 2026 16:12:23 +0200 [thread overview]
Message-ID: <afydnNJzb0i6lu8D@zed> (raw)
In-Reply-To: <20260506-media-imx355-v1-6-660685030455@raspberrypi.com>
Hi Dave
On Wed, May 06, 2026 at 07:23:44PM +0100, Dave Stevenson wrote:
> Store the binning mode in the mode structure and set the registers
> based on that, rather than having the bare register writes spelled
> out for each mode.
Isn't it trivial to calculate this from the (analog crop / visible
size) ratios ?
>
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> ---
> drivers/media/i2c/imx355.c | 73 ++++++++++++++++++++--------------------------
> 1 file changed, 31 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/media/i2c/imx355.c b/drivers/media/i2c/imx355.c
> index 56a82f37709e..422454e529a7 100644
> --- a/drivers/media/i2c/imx355.c
> +++ b/drivers/media/i2c/imx355.c
> @@ -73,6 +73,10 @@
> #define IMX355_TEST_PATTERN_GRAY_COLOR_BARS 3
> #define IMX355_TEST_PATTERN_PN9 4
>
> +#define IMX355_REG_BINNING_MODE 0x0900
> +#define IMX355_REG_BINNING_TYPE 0x0901
> +#define IMX355_REG_BINNING_WEIGHTING 0x0902
> +
> /* Flip Control */
> #define IMX355_REG_ORIENTATION 0x0101
>
> @@ -117,6 +121,7 @@ struct imx355_mode {
> u16 y_add_start;
> u16 x_add_end;
> u16 y_add_end;
> + u8 binning_mode;
> };
>
> struct imx355_clk_params {
> @@ -269,113 +274,71 @@ static const struct imx355_reg_list imx355_global_setting = {
> };
>
> static const struct imx355_reg mode_3268x2448_regs[] = {
> - { 0x0900, 0x00 },
> - { 0x0901, 0x11 },
> - { 0x0902, 0x00 },
> { 0x0700, 0x00 },
> { 0x0701, 0x10 },
> };
>
> static const struct imx355_reg mode_3264x2448_regs[] = {
> - { 0x0900, 0x00 },
> - { 0x0901, 0x11 },
> - { 0x0902, 0x00 },
> { 0x0700, 0x00 },
> { 0x0701, 0x10 },
> };
>
> static const struct imx355_reg mode_3280x2464_regs[] = {
> - { 0x0900, 0x00 },
> - { 0x0901, 0x11 },
> - { 0x0902, 0x00 },
> { 0x0700, 0x00 },
> { 0x0701, 0x10 },
> };
>
> static const struct imx355_reg mode_1940x1096_regs[] = {
> - { 0x0900, 0x00 },
> - { 0x0901, 0x11 },
> - { 0x0902, 0x00 },
> { 0x0700, 0x00 },
> { 0x0701, 0x10 },
> };
>
> static const struct imx355_reg mode_1936x1096_regs[] = {
> - { 0x0900, 0x00 },
> - { 0x0901, 0x11 },
> - { 0x0902, 0x00 },
> { 0x0700, 0x00 },
> { 0x0701, 0x10 },
> };
>
> static const struct imx355_reg mode_1924x1080_regs[] = {
> - { 0x0900, 0x00 },
> - { 0x0901, 0x11 },
> - { 0x0902, 0x00 },
> { 0x0700, 0x00 },
> { 0x0701, 0x10 },
> };
>
> static const struct imx355_reg mode_1920x1080_regs[] = {
> - { 0x0900, 0x00 },
> - { 0x0901, 0x11 },
> - { 0x0902, 0x00 },
> { 0x0700, 0x00 },
> { 0x0701, 0x10 },
> };
>
> static const struct imx355_reg mode_1640x1232_regs[] = {
> - { 0x0900, 0x01 },
> - { 0x0901, 0x22 },
> - { 0x0902, 0x00 },
> { 0x0700, 0x00 },
> { 0x0701, 0x10 },
> };
>
> static const struct imx355_reg mode_1640x922_regs[] = {
> - { 0x0900, 0x01 },
> - { 0x0901, 0x22 },
> - { 0x0902, 0x00 },
> { 0x0700, 0x00 },
> { 0x0701, 0x10 },
> };
>
> static const struct imx355_reg mode_1300x736_regs[] = {
> - { 0x0900, 0x01 },
> - { 0x0901, 0x22 },
> - { 0x0902, 0x00 },
> { 0x0700, 0x00 },
> { 0x0701, 0x10 },
> };
>
> static const struct imx355_reg mode_1296x736_regs[] = {
> - { 0x0900, 0x01 },
> - { 0x0901, 0x22 },
> - { 0x0902, 0x00 },
> { 0x0700, 0x00 },
> { 0x0701, 0x10 },
> };
>
> static const struct imx355_reg mode_1284x720_regs[] = {
> - { 0x0900, 0x01 },
> - { 0x0901, 0x22 },
> - { 0x0902, 0x00 },
> { 0x0700, 0x00 },
> { 0x0701, 0x10 },
> };
>
> static const struct imx355_reg mode_1280x720_regs[] = {
> - { 0x0900, 0x01 },
> - { 0x0901, 0x22 },
> - { 0x0902, 0x00 },
> { 0x0700, 0x00 },
> { 0x0701, 0x10 },
> };
>
> static const struct imx355_reg mode_820x616_regs[] = {
> - { 0x0900, 0x01 },
> - { 0x0901, 0x44 },
> - { 0x0902, 0x00 },
> { 0x0700, 0x02 },
> { 0x0701, 0x78 },
> };
> @@ -413,6 +376,7 @@ static const struct imx355_mode supported_modes[] = {
> .y_add_start = 0x0000,
> .x_add_end = 0x0ccf,
> .y_add_end = 0x099f,
> + .binning_mode = 0x11,
> },
> {
> .width = 3268,
> @@ -429,6 +393,7 @@ static const struct imx355_mode supported_modes[] = {
> .y_add_start = 0x0008,
> .x_add_end = 0x0ccb,
> .y_add_end = 0x997,
> + .binning_mode = 0x11,
> },
> {
> .width = 3264,
> @@ -445,6 +410,7 @@ static const struct imx355_mode supported_modes[] = {
> .y_add_start = 0x0008,
> .x_add_end = 0x0cc7,
> .y_add_end = 0x0997,
> + .binning_mode = 0x11,
> },
> {
> .width = 1940,
> @@ -461,6 +427,7 @@ static const struct imx355_mode supported_modes[] = {
> .y_add_start = 0x02ac,
> .x_add_end = 0x0a33,
> .y_add_end = 0x06f3,
> + .binning_mode = 0x11,
> },
> {
> .width = 1936,
> @@ -477,6 +444,7 @@ static const struct imx355_mode supported_modes[] = {
> .y_add_start = 0x02ac,
> .x_add_end = 0x0a2f,
> .y_add_end = 0x06f3,
> + .binning_mode = 0x11,
> },
> {
> .width = 1924,
> @@ -493,6 +461,7 @@ static const struct imx355_mode supported_modes[] = {
> .y_add_start = 0x02b4,
> .x_add_end = 0x0a2b,
> .y_add_end = 0x06eb,
> + .binning_mode = 0x11,
> },
> {
> .width = 1920,
> @@ -509,6 +478,7 @@ static const struct imx355_mode supported_modes[] = {
> .y_add_start = 0x02b4,
> .x_add_end = 0x0a27,
> .y_add_end = 0x06eb,
> + .binning_mode = 0x11,
> },
> {
> .width = 1640,
> @@ -525,6 +495,7 @@ static const struct imx355_mode supported_modes[] = {
> .y_add_start = 0x0000,
> .x_add_end = 0x0ccf,
> .y_add_end = 0x099f,
> + .binning_mode = 0x22,
> },
> {
> .width = 1640,
> @@ -541,6 +512,7 @@ static const struct imx355_mode supported_modes[] = {
> .y_add_start = 0x0130,
> .x_add_end = 0x0ccf,
> .y_add_end = 0x0863,
> + .binning_mode = 0x22,
> },
> {
> .width = 1300,
> @@ -557,6 +529,7 @@ static const struct imx355_mode supported_modes[] = {
> .y_add_start = 0x01f0,
> .x_add_end = 0x0b7f,
> .y_add_end = 0x07af,
> + .binning_mode = 0x22,
> },
> {
> .width = 1296,
> @@ -573,6 +546,7 @@ static const struct imx355_mode supported_modes[] = {
> .y_add_start = 0x01f0,
> .x_add_end = 0x0b77,
> .y_add_end = 0x07af,
> + .binning_mode = 0x22,
> },
> {
> .width = 1284,
> @@ -589,6 +563,7 @@ static const struct imx355_mode supported_modes[] = {
> .y_add_start = 0x0200,
> .x_add_end = 0x0b6f,
> .y_add_end = 0x079f,
> + .binning_mode = 0x22,
> },
> {
> .width = 1280,
> @@ -605,6 +580,7 @@ static const struct imx355_mode supported_modes[] = {
> .y_add_start = 0x0200,
> .x_add_end = 0x0b67,
> .y_add_end = 0x079f,
> + .binning_mode = 0x22,
> },
> {
> .width = 820,
> @@ -621,6 +597,7 @@ static const struct imx355_mode supported_modes[] = {
> .y_add_start = 0x0000,
> .x_add_end = 0x0ccf,
> .y_add_end = 0x099f,
> + .binning_mode = 0x44,
> },
> };
>
> @@ -997,6 +974,18 @@ static int imx355_start_streaming(struct imx355 *imx355)
> if (ret)
> return ret;
>
> + ret = imx355_write_reg(imx355, IMX355_REG_BINNING_MODE, 1,
> + mode->binning_mode == 0x11 ? 0x00 : 0x01);
> + if (ret)
> + return ret;
> + ret = imx355_write_reg(imx355, IMX355_REG_BINNING_TYPE, 1,
> + mode->binning_mode);
> + if (ret)
> + return ret;
> + ret = imx355_write_reg(imx355, IMX355_REG_BINNING_WEIGHTING, 1, 0x00);
> + if (ret)
> + return ret;
> +
> /* Set PLL registers for the external clock frequency */
> ret = imx355_write_reg(imx355, IMX355_REG_EXTCLK_FREQ, 2,
> imx355->clk_params->extclk_freq);
>
> --
> 2.34.1
>
>
next prev parent reply other threads:[~2026-05-07 14:12 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-06 18:23 [PATCH 00/13] media/imx355: General code cleanups, and adding support for 2 lane operation Dave Stevenson
2026-05-06 18:23 ` [PATCH 01/13] media: imx355: Remove duplicated registers from the mode tables Dave Stevenson
2026-05-07 13:41 ` Jacopo Mondi
2026-05-06 18:23 ` [PATCH 02/13] media: imx355: Remove setting FRM_LENGTH_LINES in the mode regs Dave Stevenson
2026-05-07 13:50 ` Jacopo Mondi
2026-05-06 18:23 ` [PATCH 03/13] media: imx355: Programmatically set the crop parameters for each mode Dave Stevenson
2026-05-07 14:00 ` Jacopo Mondi
2026-05-07 16:01 ` Dave Stevenson
2026-05-06 18:23 ` [PATCH 04/13] media: imx355: Remove the duplication between width/height and x/y_out_size Dave Stevenson
2026-05-06 18:23 ` [PATCH 05/13] media: imx355: Set register LINE_LENGTH_PCK programmatically Dave Stevenson
2026-05-07 14:09 ` Jacopo Mondi
2026-05-07 15:18 ` Dave Stevenson
2026-05-06 18:23 ` [PATCH 06/13] media: imx355: Set binning mode registers programmatically Dave Stevenson
2026-05-07 14:12 ` Jacopo Mondi [this message]
2026-05-06 18:23 ` [PATCH 07/13] media: imx355: Remove link_freq_index from each mode as ununsed Dave Stevenson
2026-05-07 14:12 ` Jacopo Mondi
2026-05-06 18:23 ` [PATCH 08/13] media: imx355: pixel_rate never changes, so don't recompute Dave Stevenson
2026-05-07 14:13 ` Jacopo Mondi
2026-05-06 18:23 ` [PATCH 09/13] media: imx355: Remove redundant fll_min, and implement fixed offset Dave Stevenson
2026-05-07 14:29 ` Jacopo Mondi
2026-05-07 15:21 ` Dave Stevenson
2026-05-06 18:23 ` [PATCH 10/13] media: imx355: Add support for get_selection Dave Stevenson
2026-05-07 14:42 ` Jacopo Mondi
2026-05-07 15:02 ` Dave Stevenson
2026-05-06 18:23 ` [PATCH 11/13] media: imx355: Use pm_runtime autosuspend_delay Dave Stevenson
2026-05-07 14:43 ` Jacopo Mondi
2026-05-06 18:23 ` [PATCH 12/13] media: imx355: Convert to new CCI register access helpers Dave Stevenson
2026-05-07 14:49 ` Jacopo Mondi
2026-05-06 18:23 ` [PATCH 13/13] media: imx355: Support 2 lane readout Dave Stevenson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=afydnNJzb0i6lu8D@zed \
--to=jacopo.mondi@ideasonboard.com \
--cc=20260414-imx355-24mhz-v1-1-9ae77bc6e7ec@ixit.cz \
--cc=dave.stevenson@raspberrypi.com \
--cc=david@ixit.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=tian.shu.qiu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox