From: "H . J . Lu" <hjl@lucon.org>
To: Dominic Sweetman <dom@algor.co.uk>,
GNU C Library <libc-alpha@sources.redhat.com>,
linux-mips@oss.sgi.com
Subject: Re: PATCH: Fix ll/sc for mips (take 3)
Date: Tue, 5 Feb 2002 11:30:17 -0800 [thread overview]
Message-ID: <20020205113017.A6144@lucon.org> (raw)
In-Reply-To: <20020204215804.A2095@nevyn.them.org>; from dan@debian.org on Mon, Feb 04, 2002 at 09:58:04PM -0500
On Mon, Feb 04, 2002 at 09:58:04PM -0500, Daniel Jacobowitz wrote:
> On Mon, Feb 04, 2002 at 05:28:57PM -0800, H . J . Lu wrote:
> > On Mon, Feb 04, 2002 at 04:46:07PM +0000, Dominic Sweetman wrote:
> > >
> > > H . J . Lu (hjl@lucon.org) writes:
> > >
> > > > I can change glibc not to use branch-likely without using nop. But it
> > > > may require one or two instructions outside of the loop. Should I do
> > > > it given what we know now?
> > >
> > > I would not recommend using "branch likely" in assembler coding, if
> > > that's what you're asking.
> > >
> >
> > Here is a patch to remove branch likely. But I couldn't find a way
> > not to fill the delay slot with nop. BTW, is that safe to remove
> > ".set noreorder"?
>
> You mean, if there is nothing which can be put there? Yes, it's safe.
>
Here is a new patch. I removed the extra "ll" in the delay slot.
H.J.
---
2002-02-05 H.J. Lu <hjl@gnu.org>
* sysdeps/mips/pspinlock.c (__pthread_spin_lock): Not use
branch likely. Remove ".set noreorder".
* sysdeps/mips/pt-machine.h (testandset): Liekwise.
(__compare_and_swap): Liekwise.
2002-02-05 H.J. Lu <hjl@gnu.org>
* sysdeps/mips/atomicity.h (exchange_and_add): Not use branch
likely. Remove ".set noreorder".
(atomic_add): Likewise.
(compare_and_swap): Likewise.
* sysdeps/unix/sysv/linux/mips/sys/tas.h (_test_and_set):
Likewise.
--- libc/linuxthreads/sysdeps/mips/pspinlock.c.llsc Mon Feb 4 13:45:01 2002
+++ libc/linuxthreads/sysdeps/mips/pspinlock.c Tue Feb 5 11:26:22 2002
@@ -32,17 +32,13 @@ __pthread_spin_lock (pthread_spinlock_t
unsigned int tmp1, tmp2;
asm volatile
- ("\t\t\t# spin_lock\n\t"
- "ll %1,%3\n"
+ ("\t\t\t# spin_lock\n"
"1:\n\t"
- ".set push\n\t"
- ".set noreorder\n\t"
+ "ll %1,%3\n"
"bnez %1,1b\n\t"
" li %2,1\n\t"
"sc %2,%0\n\t"
- "beqzl %2,1b\n\t"
- " ll %1,%3\n\t"
- ".set pop"
+ "beqz %2,1b\n\t"
: "=m" (*lock), "=&r" (tmp1), "=&r" (tmp2)
: "m" (*lock)
: "memory");
--- libc/linuxthreads/sysdeps/mips/pt-machine.h.llsc Mon Feb 4 13:45:01 2002
+++ libc/linuxthreads/sysdeps/mips/pt-machine.h Tue Feb 5 11:26:51 2002
@@ -57,18 +57,14 @@ __compare_and_swap (long int *p, long in
long int ret, temp;
__asm__ __volatile__
- ("/* Inline compare & swap */\n\t"
- "ll %1,%5\n"
+ ("/* Inline compare & swap */\n"
"1:\n\t"
- ".set push\n\t"
- ".set noreorder\n\t"
+ "ll %1,%5\n"
"bne %1,%3,2f\n\t"
" move %0,$0\n\t"
"move %0,%4\n\t"
"sc %0,%2\n\t"
- "beqzl %0,1b\n\t"
- " ll %1,%5\n\t"
- ".set pop\n"
+ "beqz %0,1b\n\t"
"2:\n\t"
"/* End compare & swap */"
: "=&r" (ret), "=&r" (temp), "=m" (*p)
--- libc/sysdeps/mips/atomicity.h.llsc Mon Feb 4 13:45:18 2002
+++ libc/sysdeps/mips/atomicity.h Tue Feb 5 11:25:09 2002
@@ -32,16 +32,12 @@ exchange_and_add (volatile uint32_t *mem
int result, tmp;
__asm__ __volatile__
- ("/* Inline exchange & add */\n\t"
+ ("/* Inline exchange & add */\n"
+ "1:\n"
"ll %0,%3\n"
- "1:\n\t"
"addu %1,%4,%0\n\t"
"sc %1,%2\n\t"
- ".set push\n\t"
- ".set noreorder\n\t"
- "beqzl %1,1b\n\t"
- " ll %0,%3\n\t"
- ".set pop\n\t"
+ "beqz %1,1b\n\t"
"/* End exchange & add */"
: "=&r"(result), "=&r"(tmp), "=m"(*mem)
: "m" (*mem), "r"(val)
@@ -57,16 +53,12 @@ atomic_add (volatile uint32_t *mem, int
int result;
__asm__ __volatile__
- ("/* Inline atomic add */\n\t"
- "ll %0,%2\n"
+ ("/* Inline atomic add */\n"
"1:\n\t"
+ "ll %0,%2\n"
"addu %0,%3,%0\n\t"
"sc %0,%1\n\t"
- ".set push\n\t"
- ".set noreorder\n\t"
- "beqzl %0,1b\n\t"
- " ll %0,%2\n\t"
- ".set pop\n\t"
+ "beqz %0,1b\n\t"
"/* End atomic add */"
: "=&r"(result), "=m"(*mem)
: "m" (*mem), "r"(val)
@@ -80,18 +72,14 @@ compare_and_swap (volatile long int *p,
long int ret, temp;
__asm__ __volatile__
- ("/* Inline compare & swap */\n\t"
- "ll %1,%5\n"
+ ("/* Inline compare & swap */\n"
"1:\n\t"
- ".set push\n\t"
- ".set noreorder\n\t"
+ "ll %1,%5\n"
"bne %1,%3,2f\n\t"
" move %0,$0\n\t"
"move %0,%4\n\t"
"sc %0,%2\n\t"
- "beqzl %0,1b\n\t"
- " ll %1,%5\n\t"
- ".set pop\n"
+ "beqz %0,1b\n\t"
"2:\n\t"
"/* End compare & swap */"
: "=&r" (ret), "=&r" (temp), "=m" (*p)
--- libc/sysdeps/unix/sysv/linux/mips/sys/tas.h.llsc Mon Feb 4 13:45:28 2002
+++ libc/sysdeps/unix/sysv/linux/mips/sys/tas.h Tue Feb 5 11:25:34 2002
@@ -42,17 +42,13 @@ _test_and_set (int *p, int v) __THROW
int r, t;
__asm__ __volatile__
- ("/* Inline test and set */\n\t"
- "ll %0,%3\n"
+ ("/* Inline test and set */\n"
"1:\n\t"
- ".set push\n\t"
- ".set noreorder\n\t"
+ "ll %0,%3\n"
"beq %0,%4,2f\n\t"
" move %1,%4\n\t"
"sc %1,%2\n\t"
- "beqzl %1,1b\n\t"
- " ll %0,%3\n\t"
- ".set pop\n"
+ "beqz %1,1b\n\t"
"2:\n\t"
"/* End test and set */"
: "=&r" (r), "=&r" (t), "=m" (*p)
next prev parent reply other threads:[~2002-02-05 19:30 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-01-31 20:35 PATCH: Fix ll/sc for mips H . J . Lu
2002-01-31 22:17 ` Maciej W. Rozycki
2002-01-31 22:41 ` H . J . Lu
2002-02-01 3:35 ` Hiroyuki Machida
2002-02-01 4:02 ` [libc-alpha] " Kaz Kylheku
2002-02-01 4:02 ` Kaz Kylheku
2002-02-01 4:59 ` Hiroyuki Machida
2002-02-01 7:00 ` H . J . Lu
2002-02-01 11:12 ` Hiroyuki Machida
2002-02-01 10:49 ` Andreas Schwab
2002-02-01 11:23 ` Geoff Keating
2002-02-01 7:10 ` H . J . Lu
2002-02-01 7:17 ` H . J . Lu
2002-02-01 11:45 ` Maciej W. Rozycki
2002-02-01 18:29 ` PATCH: Fix ll/sc for mips (take 3) H . J . Lu
2002-02-01 23:01 ` Daniel Jacobowitz
2002-02-01 23:15 ` H . J . Lu
2002-02-02 2:37 ` Hiroyuki Machida
2002-02-04 9:32 ` Dominic Sweetman
2002-02-05 6:16 ` Jay Carlson
2002-02-05 8:28 ` Ralf Baechle
2002-02-05 15:10 ` Jay Carlson
2002-02-05 16:06 ` Jay Carlson
2002-02-02 3:26 ` Daniel Jacobowitz
2002-02-02 18:53 ` Justin Carlson
2002-02-02 20:03 ` H . J . Lu
2002-02-02 20:49 ` Hartvig Ekner
2002-02-02 20:49 ` Hartvig Ekner
2002-02-03 5:47 ` Justin Carlson
2002-02-04 19:17 ` Paul Koning
[not found] ` <mailpost.1012680250.7159@news-sj1-1>
2002-02-03 23:29 ` cgd
2002-02-04 6:07 ` Ralf Baechle
2002-02-04 9:46 ` Dominic Sweetman
2002-02-04 16:31 ` H . J . Lu
2002-02-04 16:46 ` Dominic Sweetman
2002-02-05 1:28 ` H . J . Lu
2002-02-05 2:58 ` Daniel Jacobowitz
2002-02-05 4:42 ` H . J . Lu
2002-02-05 4:47 ` Daniel Jacobowitz
2002-02-05 5:30 ` Justin Carlson
2002-02-05 8:39 ` Hartvig Ekner
2002-02-05 8:39 ` Hartvig Ekner
2002-02-05 11:37 ` Maciej W. Rozycki
2002-02-05 12:12 ` Ralf Baechle
2002-02-05 12:31 ` Maciej W. Rozycki
2002-02-05 12:38 ` Hartvig Ekner
2002-02-05 12:38 ` Hartvig Ekner
2002-02-05 13:28 ` Maciej W. Rozycki
2002-02-05 19:28 ` Hartvig Ekner
2002-02-05 19:28 ` Hartvig Ekner
2002-02-05 18:59 ` Ralf Baechle
2002-02-05 19:30 ` H . J . Lu [this message]
2002-02-05 21:54 ` H . J . Lu
2002-02-06 10:32 ` Ralf Baechle
2002-02-06 20:45 ` Why does -g turn off filling the delat slot? H . J . Lu
2002-02-06 21:00 ` PATCH: Modify the mips gas behavior for -g -O H . J . Lu
2002-02-06 21:16 ` Eric Christopher
2002-02-06 21:40 ` Ian Lance Taylor
2002-02-06 21:46 ` Eric Christopher
2002-02-06 22:00 ` PATCH: Define SUBTARGET_ASM_DEBUGGING_SPEC for Linux/mips H . J . Lu
2002-02-07 8:24 ` Eric Christopher
2002-02-06 11:37 ` PATCH: Fix ll/sc for mips (take 3) Maciej W. Rozycki
2002-02-04 17:44 ` cgd
2002-02-04 6:46 ` Ralf Baechle
2002-02-04 7:01 ` PATCH: Fix ll/sc for mips Ralf Baechle
2002-02-04 14:54 ` Maciej W. Rozycki
2002-02-01 11:50 ` Maciej W. Rozycki
2002-02-01 17:40 ` H . J . Lu
2002-02-01 21:41 ` Maciej W. Rozycki
2002-02-01 22:47 ` H . J . Lu
2002-02-02 11:06 ` Maciej W. Rozycki
2002-02-03 2:29 ` Ulrich Drepper
2002-02-03 2:29 ` Ulrich Drepper
2002-01-31 23:33 ` [libc-alpha] " Kaz Kylheku
2002-01-31 23:33 ` Kaz Kylheku
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020205113017.A6144@lucon.org \
--to=hjl@lucon.org \
--cc=dom@algor.co.uk \
--cc=libc-alpha@sources.redhat.com \
--cc=linux-mips@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox