From: John Crispin <john@phrozen.org>
To: James Hogan <jhogan@kernel.org>, Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, Felix Fietkau <nbd@nbd.name>,
John Crispin <john@phrozen.org>
Subject: [PATCH V2 15/25] MIPS: ath79: pass PLL base to clock init functions
Date: Fri, 20 Jul 2018 13:58:32 +0200 [thread overview]
Message-ID: <20180720115842.8406-16-john@phrozen.org> (raw)
In-Reply-To: <20180720115842.8406-1-john@phrozen.org>
From: Felix Fietkau <nbd@nbd.name>
Preparation for passing the mapped base via DT
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/mips/ath79/clock.c | 60 ++++++++++++++++++++++++-------------------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c
index e02b819b2f5d..984b3cdebd22 100644
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -80,7 +80,7 @@ static struct clk * __init ath79_set_ff_clk(int type, const char *parent,
return clk;
}
-static void __init ar71xx_clocks_init(void)
+static void __init ar71xx_clocks_init(void __iomem *pll_base)
{
unsigned long ref_rate;
unsigned long cpu_rate;
@@ -92,7 +92,7 @@ static void __init ar71xx_clocks_init(void)
ref_rate = AR71XX_BASE_FREQ;
- pll = ath79_pll_rr(AR71XX_PLL_REG_CPU_CONFIG);
+ pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG);
div = ((pll >> AR71XX_PLL_FB_SHIFT) & AR71XX_PLL_FB_MASK) + 1;
freq = div * ref_rate;
@@ -130,13 +130,13 @@ static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
}
-static void __init ar724x_clocks_init(void)
+static void __init ar724x_clocks_init(void __iomem *pll_base)
{
struct clk *ref_clk;
ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
- ar724x_clk_init(ref_clk, ath79_pll_base);
+ ar724x_clk_init(ref_clk, pll_base);
}
static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
@@ -197,7 +197,7 @@ static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
ref_div * out_div * ahb_div);
}
-static void __init ar933x_clocks_init(void)
+static void __init ar933x_clocks_init(void __iomem *pll_base)
{
struct clk *ref_clk;
unsigned long ref_rate;
@@ -234,7 +234,7 @@ static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
return ret;
}
-static void __init ar934x_clocks_init(void)
+static void __init ar934x_clocks_init(void __iomem *pll_base)
{
unsigned long ref_rate;
unsigned long cpu_rate;
@@ -265,7 +265,7 @@ static void __init ar934x_clocks_init(void)
AR934X_SRIF_DPLL1_REFDIV_MASK;
frac = 1 << 18;
} else {
- pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
+ pll = __raw_readl(pll_base + AR934X_PLL_CPU_CONFIG_REG);
out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
@@ -292,7 +292,7 @@ static void __init ar934x_clocks_init(void)
AR934X_SRIF_DPLL1_REFDIV_MASK;
frac = 1 << 18;
} else {
- pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
+ pll = __raw_readl(pll_base + AR934X_PLL_DDR_CONFIG_REG);
out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
@@ -307,7 +307,7 @@ static void __init ar934x_clocks_init(void)
ddr_pll = ar934x_get_pll_freq(ref_rate, ref_div, nint,
nfrac, frac, out_div);
- clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
+ clk_ctrl = __raw_readl(pll_base + AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) &
AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
@@ -347,7 +347,7 @@ static void __init ar934x_clocks_init(void)
iounmap(dpll_base);
}
-static void __init qca953x_clocks_init(void)
+static void __init qca953x_clocks_init(void __iomem *pll_base)
{
unsigned long ref_rate;
unsigned long cpu_rate;
@@ -363,7 +363,7 @@ static void __init qca953x_clocks_init(void)
else
ref_rate = 25 * 1000 * 1000;
- pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
+ pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG);
out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
@@ -377,7 +377,7 @@ static void __init qca953x_clocks_init(void)
cpu_pll += frac * (ref_rate >> 6) / ref_div;
cpu_pll /= (1 << out_div);
- pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
+ pll = __raw_readl(pll_base + QCA953X_PLL_DDR_CONFIG_REG);
out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
@@ -391,7 +391,7 @@ static void __init qca953x_clocks_init(void)
ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4);
ddr_pll /= (1 << out_div);
- clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
+ clk_ctrl = __raw_readl(pll_base + QCA953X_PLL_CLK_CTRL_REG);
postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
@@ -429,7 +429,7 @@ static void __init qca953x_clocks_init(void)
ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
}
-static void __init qca955x_clocks_init(void)
+static void __init qca955x_clocks_init(void __iomem *pll_base)
{
unsigned long ref_rate;
unsigned long cpu_rate;
@@ -445,7 +445,7 @@ static void __init qca955x_clocks_init(void)
else
ref_rate = 25 * 1000 * 1000;
- pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG);
+ pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG);
out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
@@ -459,7 +459,7 @@ static void __init qca955x_clocks_init(void)
cpu_pll += frac * ref_rate / (ref_div * (1 << 6));
cpu_pll /= (1 << out_div);
- pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG);
+ pll = __raw_readl(pll_base + QCA955X_PLL_DDR_CONFIG_REG);
out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK;
ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
@@ -473,7 +473,7 @@ static void __init qca955x_clocks_init(void)
ddr_pll += frac * ref_rate / (ref_div * (1 << 10));
ddr_pll /= (1 << out_div);
- clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG);
+ clk_ctrl = __raw_readl(pll_base + QCA955X_PLL_CLK_CTRL_REG);
postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
@@ -511,7 +511,7 @@ static void __init qca955x_clocks_init(void)
ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
}
-static void __init qca956x_clocks_init(void)
+static void __init qca956x_clocks_init(void __iomem *pll_base)
{
unsigned long ref_rate;
unsigned long cpu_rate;
@@ -537,13 +537,13 @@ static void __init qca956x_clocks_init(void)
else
ref_rate = 25 * 1000 * 1000;
- pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG);
+ pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG);
out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
- pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG);
+ pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG1_REG);
nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
@@ -556,12 +556,12 @@ static void __init qca956x_clocks_init(void)
cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
cpu_pll /= (1 << out_div);
- pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG);
+ pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG_REG);
out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
- pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG);
+ pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG1_REG);
nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
@@ -574,7 +574,7 @@ static void __init qca956x_clocks_init(void)
ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
ddr_pll /= (1 << out_div);
- clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG);
+ clk_ctrl = __raw_readl(pll_base + QCA956X_PLL_CLK_CTRL_REG);
postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
@@ -618,19 +618,19 @@ void __init ath79_clocks_init(void)
const char *uart;
if (soc_is_ar71xx())
- ar71xx_clocks_init();
+ ar71xx_clocks_init(ath79_pll_base);
else if (soc_is_ar724x() || soc_is_ar913x())
- ar724x_clocks_init();
+ ar724x_clocks_init(ath79_pll_base);
else if (soc_is_ar933x())
- ar933x_clocks_init();
+ ar933x_clocks_init(ath79_pll_base);
else if (soc_is_ar934x())
- ar934x_clocks_init();
+ ar934x_clocks_init(ath79_pll_base);
else if (soc_is_qca953x())
- qca953x_clocks_init();
+ qca953x_clocks_init(ath79_pll_base);
else if (soc_is_qca955x())
- qca955x_clocks_init();
+ qca955x_clocks_init(ath79_pll_base);
else if (soc_is_qca956x() || soc_is_tp9343())
- qca956x_clocks_init();
+ qca956x_clocks_init(ath79_pll_base);
else
BUG();
--
2.11.0
next prev parent reply other threads:[~2018-07-20 12:26 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-20 11:58 [PATCH V2 00/25] MIPS: ath79: convert target to pure OF John Crispin
2018-07-20 11:58 ` [PATCH V2 01/25] MIPS: ath79: add lots of missing registers John Crispin
2018-07-20 11:58 ` [PATCH V2 02/25] MIPS: ath79: add support for QCA953x QCA956x TP9343 John Crispin
2018-07-20 11:58 ` [PATCH V2 03/25] MIPS: ath79: select the PINCTRL subsystem John Crispin
2018-07-20 11:58 ` [PATCH V2 04/25] MIPS: ath79: fix register address in ath79_ddr_wb_flush() John Crispin
2018-07-20 15:44 ` Sergei Shtylyov
2018-07-20 17:14 ` Paul Burton
2018-07-20 17:18 ` Paul Burton
2018-07-20 11:58 ` [PATCH V2 05/25] MIPS: ath79: fix system restart John Crispin
2018-07-20 11:58 ` [PATCH V2 06/25] MIPS: ath79: finetune cpu-overrides John Crispin
2018-07-20 11:58 ` [PATCH V2 07/25] MIPS: ath79: enable uart during early_prink John Crispin
2018-07-20 15:47 ` Sergei Shtylyov
2018-07-20 11:58 ` [PATCH V2 08/25] MIPS: ath79: get PCIe controller out of reset John Crispin
2018-07-20 11:58 ` [PATCH V2 09/25] dt-bindings: PCI: qcom,ar7100: adds binding doc John Crispin
2018-07-20 15:51 ` Sergei Shtylyov
2018-07-20 15:58 ` Sergei Shtylyov
2018-07-20 11:58 ` [PATCH V2 10/25] MIPS: pci-ar71xx: convert to OF John Crispin
2018-07-20 11:58 ` [PATCH V2 11/25] dt-bindings: PCI: qcom,ar7240: adds binding doc John Crispin
2018-07-20 16:11 ` Sergei Shtylyov
2018-07-25 17:34 ` Rob Herring
2018-07-20 11:58 ` [PATCH V2 12/25] MIPS: pci-ar724x: convert to OF John Crispin
2018-07-20 11:58 ` [PATCH V2 13/25] MIPS: ath79: add helpers for setting clocks and expose the ref clock John Crispin
2018-07-20 11:58 ` [PATCH V2 14/25] MIPS: ath79: move legacy "wdt" and "uart" clock aliases out of soc init John Crispin
2018-07-20 11:58 ` John Crispin [this message]
2018-07-20 11:58 ` [PATCH V2 16/25] MIPS: ath79: make specifying the reference clock in DT optional John Crispin
2018-07-20 11:58 ` [PATCH V2 17/25] MIPS: ath79: support setting up clock via DT on all SoC types John Crispin
2018-07-20 11:58 ` [PATCH V2 18/25] MIPS: ath79: export switch MDIO reference clock John Crispin
2018-07-20 11:58 ` [PATCH V2 19/25] MIPS: ath79: drop legacy IRQ code John Crispin
2018-07-20 11:58 ` [PATCH V2 20/25] MIPS: ath79: drop machfiles John Crispin
2018-07-20 11:58 ` [PATCH V2 21/25] MIPS: ath79: drop legacy pci code John Crispin
2018-07-20 11:58 ` [PATCH V2 22/25] MIPS: ath79: drop platform device registration code John Crispin
2018-07-20 11:58 ` [PATCH V2 23/25] MIPS: ath79: drop !OF clock code John Crispin
2018-07-20 11:58 ` [PATCH V2 24/25] MIPS: ath79: sanitize symbols John Crispin
2018-07-20 11:58 ` [PATCH V2 25/25] spi: ath79: drop pdata support John Crispin
2018-07-25 2:15 ` [PATCH V2 00/25] MIPS: ath79: convert target to pure OF Paul Burton
2018-07-25 5:11 ` John Crispin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180720115842.8406-16-john@phrozen.org \
--to=john@phrozen.org \
--cc=jhogan@kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=nbd@nbd.name \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox