From: John Crispin <john@phrozen.org>
To: James Hogan <jhogan@kernel.org>, Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, John Crispin <john@phrozen.org>
Subject: [PATCH V2 21/25] MIPS: ath79: drop legacy pci code
Date: Fri, 20 Jul 2018 13:58:38 +0200 [thread overview]
Message-ID: <20180720115842.8406-22-john@phrozen.org> (raw)
In-Reply-To: <20180720115842.8406-1-john@phrozen.org>
With the target now being fully OF based, we can drop the legacy pci
platform code. The only bits that we need to keep is the fixup code
which we move to its own code file.
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/mips/ath79/Makefile | 1 -
arch/mips/ath79/pci.c | 273 --------------------------------------------
arch/mips/ath79/pci.h | 35 ------
arch/mips/pci/Makefile | 1 +
arch/mips/pci/fixup-ath79.c | 21 ++++
5 files changed, 22 insertions(+), 309 deletions(-)
delete mode 100644 arch/mips/ath79/pci.c
delete mode 100644 arch/mips/ath79/pci.h
create mode 100644 arch/mips/pci/fixup-ath79.c
diff --git a/arch/mips/ath79/Makefile b/arch/mips/ath79/Makefile
index ab8e26fe7446..bd0c9b8b1b5b 100644
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -11,7 +11,6 @@
obj-y := prom.o setup.o common.o clock.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_PCI) += pci.o
#
# Devices
diff --git a/arch/mips/ath79/pci.c b/arch/mips/ath79/pci.c
deleted file mode 100644
index b816cb4a25ff..000000000000
--- a/arch/mips/ath79/pci.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * Atheros AR71XX/AR724X specific PCI setup code
- *
- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Atheros' 2.6.15 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/resource.h>
-#include <linux/platform_device.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/irq.h>
-#include "pci.h"
-
-static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
-static const struct ath79_pci_irq *ath79_pci_irq_map;
-static unsigned ath79_pci_nr_irqs;
-
-static const struct ath79_pci_irq ar71xx_pci_irq_map[] = {
- {
- .slot = 17,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(0),
- }, {
- .slot = 18,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(1),
- }, {
- .slot = 19,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(2),
- }
-};
-
-static const struct ath79_pci_irq ar724x_pci_irq_map[] = {
- {
- .slot = 0,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(0),
- }
-};
-
-static const struct ath79_pci_irq qca955x_pci_irq_map[] = {
- {
- .bus = 0,
- .slot = 0,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(0),
- },
- {
- .bus = 1,
- .slot = 0,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(1),
- },
-};
-
-int pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
-{
- int irq = -1;
- int i;
-
- if (ath79_pci_nr_irqs == 0 ||
- ath79_pci_irq_map == NULL) {
- if (soc_is_ar71xx()) {
- ath79_pci_irq_map = ar71xx_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
- } else if (soc_is_ar724x() ||
- soc_is_ar9342() ||
- soc_is_ar9344()) {
- ath79_pci_irq_map = ar724x_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
- } else if (soc_is_qca955x()) {
- ath79_pci_irq_map = qca955x_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
- } else {
- pr_crit("pci %s: invalid irq map\n",
- pci_name((struct pci_dev *) dev));
- return irq;
- }
- }
-
- for (i = 0; i < ath79_pci_nr_irqs; i++) {
- const struct ath79_pci_irq *entry;
-
- entry = &ath79_pci_irq_map[i];
- if (entry->bus == dev->bus->number &&
- entry->slot == slot &&
- entry->pin == pin) {
- irq = entry->irq;
- break;
- }
- }
-
- if (irq < 0)
- pr_crit("pci %s: no irq found for pin %u\n",
- pci_name((struct pci_dev *) dev), pin);
- else
- pr_info("pci %s: using irq %d for pin %u\n",
- pci_name((struct pci_dev *) dev), irq, pin);
-
- return irq;
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- if (ath79_pci_plat_dev_init)
- return ath79_pci_plat_dev_init(dev);
-
- return 0;
-}
-
-void __init ath79_pci_set_irq_map(unsigned nr_irqs,
- const struct ath79_pci_irq *map)
-{
- ath79_pci_nr_irqs = nr_irqs;
- ath79_pci_irq_map = map;
-}
-
-void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
-{
- ath79_pci_plat_dev_init = func;
-}
-
-static struct platform_device *
-ath79_register_pci_ar71xx(void)
-{
- struct platform_device *pdev;
- struct resource res[4];
-
- memset(res, 0, sizeof(res));
-
- res[0].name = "cfg_base";
- res[0].flags = IORESOURCE_MEM;
- res[0].start = AR71XX_PCI_CFG_BASE;
- res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1;
-
- res[1].flags = IORESOURCE_IRQ;
- res[1].start = ATH79_CPU_IRQ(2);
- res[1].end = ATH79_CPU_IRQ(2);
-
- res[2].name = "io_base";
- res[2].flags = IORESOURCE_IO;
- res[2].start = 0;
- res[2].end = 0;
-
- res[3].name = "mem_base";
- res[3].flags = IORESOURCE_MEM;
- res[3].start = AR71XX_PCI_MEM_BASE;
- res[3].end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1;
-
- pdev = platform_device_register_simple("ar71xx-pci", -1,
- res, ARRAY_SIZE(res));
- return pdev;
-}
-
-static struct platform_device *
-ath79_register_pci_ar724x(int id,
- unsigned long cfg_base,
- unsigned long ctrl_base,
- unsigned long crp_base,
- unsigned long mem_base,
- unsigned long mem_size,
- unsigned long io_base,
- int irq)
-{
- struct platform_device *pdev;
- struct resource res[6];
-
- memset(res, 0, sizeof(res));
-
- res[0].name = "cfg_base";
- res[0].flags = IORESOURCE_MEM;
- res[0].start = cfg_base;
- res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1;
-
- res[1].name = "ctrl_base";
- res[1].flags = IORESOURCE_MEM;
- res[1].start = ctrl_base;
- res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1;
-
- res[2].flags = IORESOURCE_IRQ;
- res[2].start = irq;
- res[2].end = irq;
-
- res[3].name = "mem_base";
- res[3].flags = IORESOURCE_MEM;
- res[3].start = mem_base;
- res[3].end = mem_base + mem_size - 1;
-
- res[4].name = "io_base";
- res[4].flags = IORESOURCE_IO;
- res[4].start = io_base;
- res[4].end = io_base;
-
- res[5].name = "crp_base";
- res[5].flags = IORESOURCE_MEM;
- res[5].start = crp_base;
- res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1;
-
- pdev = platform_device_register_simple("ar724x-pci", id,
- res, ARRAY_SIZE(res));
- return pdev;
-}
-
-int __init ath79_register_pci(void)
-{
- struct platform_device *pdev = NULL;
-
- if (soc_is_ar71xx()) {
- pdev = ath79_register_pci_ar71xx();
- } else if (soc_is_ar724x()) {
- pdev = ath79_register_pci_ar724x(-1,
- AR724X_PCI_CFG_BASE,
- AR724X_PCI_CTRL_BASE,
- AR724X_PCI_CRP_BASE,
- AR724X_PCI_MEM_BASE,
- AR724X_PCI_MEM_SIZE,
- 0,
- ATH79_CPU_IRQ(2));
- } else if (soc_is_ar9342() ||
- soc_is_ar9344()) {
- u32 bootstrap;
-
- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
- if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0)
- return -ENODEV;
-
- pdev = ath79_register_pci_ar724x(-1,
- AR724X_PCI_CFG_BASE,
- AR724X_PCI_CTRL_BASE,
- AR724X_PCI_CRP_BASE,
- AR724X_PCI_MEM_BASE,
- AR724X_PCI_MEM_SIZE,
- 0,
- ATH79_IP2_IRQ(0));
- } else if (soc_is_qca9558()) {
- pdev = ath79_register_pci_ar724x(0,
- QCA955X_PCI_CFG_BASE0,
- QCA955X_PCI_CTRL_BASE0,
- QCA955X_PCI_CRP_BASE0,
- QCA955X_PCI_MEM_BASE0,
- QCA955X_PCI_MEM_SIZE,
- 0,
- ATH79_IP2_IRQ(0));
-
- pdev = ath79_register_pci_ar724x(1,
- QCA955X_PCI_CFG_BASE1,
- QCA955X_PCI_CTRL_BASE1,
- QCA955X_PCI_CRP_BASE1,
- QCA955X_PCI_MEM_BASE1,
- QCA955X_PCI_MEM_SIZE,
- 1,
- ATH79_IP3_IRQ(2));
- } else {
- /* No PCI support */
- return -ENODEV;
- }
-
- if (!pdev)
- pr_err("unable to register PCI controller device\n");
-
- return pdev ? 0 : -ENODEV;
-}
diff --git a/arch/mips/ath79/pci.h b/arch/mips/ath79/pci.h
deleted file mode 100644
index 1d00a3803c37..000000000000
--- a/arch/mips/ath79/pci.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Atheros AR71XX/AR724X PCI support
- *
- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_PCI_H
-#define _ATH79_PCI_H
-
-struct ath79_pci_irq {
- int bus;
- u8 slot;
- u8 pin;
- int irq;
-};
-
-#ifdef CONFIG_PCI
-void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
-void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
-int ath79_register_pci(void);
-#else
-static inline void
-ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map) {}
-static inline void
-ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
-static inline int ath79_register_pci(void) { return 0; }
-#endif
-
-#endif /* _ATH79_PCI_H */
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 8185a2bfaf09..c4f976593061 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o
#
# These are still pretty much in the old state, watch, go blind.
#
+obj-$(CONFIG_ATH79) += fixup-ath79.o
obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
diff --git a/arch/mips/pci/fixup-ath79.c b/arch/mips/pci/fixup-ath79.c
new file mode 100644
index 000000000000..9e651a4af05e
--- /dev/null
+++ b/arch/mips/pci/fixup-ath79.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+//#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return PCIBIOS_SUCCESSFUL;
+}
+
+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return of_irq_parse_and_map_pci(dev, slot, pin);
+}
--
2.11.0
next prev parent reply other threads:[~2018-07-20 12:26 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-20 11:58 [PATCH V2 00/25] MIPS: ath79: convert target to pure OF John Crispin
2018-07-20 11:58 ` [PATCH V2 01/25] MIPS: ath79: add lots of missing registers John Crispin
2018-07-20 11:58 ` [PATCH V2 02/25] MIPS: ath79: add support for QCA953x QCA956x TP9343 John Crispin
2018-07-20 11:58 ` [PATCH V2 03/25] MIPS: ath79: select the PINCTRL subsystem John Crispin
2018-07-20 11:58 ` [PATCH V2 04/25] MIPS: ath79: fix register address in ath79_ddr_wb_flush() John Crispin
2018-07-20 15:44 ` Sergei Shtylyov
2018-07-20 17:14 ` Paul Burton
2018-07-20 17:18 ` Paul Burton
2018-07-20 11:58 ` [PATCH V2 05/25] MIPS: ath79: fix system restart John Crispin
2018-07-20 11:58 ` [PATCH V2 06/25] MIPS: ath79: finetune cpu-overrides John Crispin
2018-07-20 11:58 ` [PATCH V2 07/25] MIPS: ath79: enable uart during early_prink John Crispin
2018-07-20 15:47 ` Sergei Shtylyov
2018-07-20 11:58 ` [PATCH V2 08/25] MIPS: ath79: get PCIe controller out of reset John Crispin
2018-07-20 11:58 ` [PATCH V2 09/25] dt-bindings: PCI: qcom,ar7100: adds binding doc John Crispin
2018-07-20 15:51 ` Sergei Shtylyov
2018-07-20 15:58 ` Sergei Shtylyov
2018-07-20 11:58 ` [PATCH V2 10/25] MIPS: pci-ar71xx: convert to OF John Crispin
2018-07-20 11:58 ` [PATCH V2 11/25] dt-bindings: PCI: qcom,ar7240: adds binding doc John Crispin
2018-07-20 16:11 ` Sergei Shtylyov
2018-07-25 17:34 ` Rob Herring
2018-07-20 11:58 ` [PATCH V2 12/25] MIPS: pci-ar724x: convert to OF John Crispin
2018-07-20 11:58 ` [PATCH V2 13/25] MIPS: ath79: add helpers for setting clocks and expose the ref clock John Crispin
2018-07-20 11:58 ` [PATCH V2 14/25] MIPS: ath79: move legacy "wdt" and "uart" clock aliases out of soc init John Crispin
2018-07-20 11:58 ` [PATCH V2 15/25] MIPS: ath79: pass PLL base to clock init functions John Crispin
2018-07-20 11:58 ` [PATCH V2 16/25] MIPS: ath79: make specifying the reference clock in DT optional John Crispin
2018-07-20 11:58 ` [PATCH V2 17/25] MIPS: ath79: support setting up clock via DT on all SoC types John Crispin
2018-07-20 11:58 ` [PATCH V2 18/25] MIPS: ath79: export switch MDIO reference clock John Crispin
2018-07-20 11:58 ` [PATCH V2 19/25] MIPS: ath79: drop legacy IRQ code John Crispin
2018-07-20 11:58 ` [PATCH V2 20/25] MIPS: ath79: drop machfiles John Crispin
2018-07-20 11:58 ` John Crispin [this message]
2018-07-20 11:58 ` [PATCH V2 22/25] MIPS: ath79: drop platform device registration code John Crispin
2018-07-20 11:58 ` [PATCH V2 23/25] MIPS: ath79: drop !OF clock code John Crispin
2018-07-20 11:58 ` [PATCH V2 24/25] MIPS: ath79: sanitize symbols John Crispin
2018-07-20 11:58 ` [PATCH V2 25/25] spi: ath79: drop pdata support John Crispin
2018-07-25 2:15 ` [PATCH V2 00/25] MIPS: ath79: convert target to pure OF Paul Burton
2018-07-25 5:11 ` John Crispin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180720115842.8406-22-john@phrozen.org \
--to=john@phrozen.org \
--cc=jhogan@kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox