From: John Crispin <john@phrozen.org>
To: James Hogan <jhogan@kernel.org>, Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, John Crispin <john@phrozen.org>
Subject: [PATCH V2 24/25] MIPS: ath79: sanitize symbols
Date: Fri, 20 Jul 2018 13:58:41 +0200 [thread overview]
Message-ID: <20180720115842.8406-25-john@phrozen.org> (raw)
In-Reply-To: <20180720115842.8406-1-john@phrozen.org>
We no longer need to select which SoCs are supported as the whole arch
code is always built. So lets drop all the SoC symbols
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/mips/Kconfig | 2 ++
arch/mips/ath79/Kconfig | 44 +++++---------------------------------------
arch/mips/pci/Makefile | 2 +-
3 files changed, 8 insertions(+), 40 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4d8e15a15d57..9f4e461bbc2c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -204,6 +204,8 @@ config ATH79
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_ZBOOT_UART_PROM
+ select HW_HAS_PCI
+ select USB_ARCH_HAS_EHCI
select USE_OF
select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
help
diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index 9496b800571c..a6a194174156 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -1,48 +1,14 @@
# SPDX-License-Identifier: GPL-2.0
if ATH79
-config SOC_AR71XX
- select HW_HAS_PCI
- def_bool n
-
-config SOC_AR724X
- select HW_HAS_PCI
- select PCI_AR724X if PCI
- def_bool n
-
-config SOC_AR913X
- def_bool n
-
-config SOC_AR933X
- def_bool n
-
-config SOC_AR934X
- select HW_HAS_PCI
- select PCI_AR724X if PCI
- def_bool n
-
-config SOC_QCA955X
- select HW_HAS_PCI
- select PCI_AR724X if PCI
+config PCI_AR71XX
+ bool "PCI support for AR7100 type SoCs"
+ depends on PCI
def_bool n
config PCI_AR724X
- def_bool n
-
-config ATH79_DEV_GPIO_BUTTONS
- def_bool n
-
-config ATH79_DEV_LEDS_GPIO
- def_bool n
-
-config ATH79_DEV_SPI
- def_bool n
-
-config ATH79_DEV_USB
- def_bool n
-
-config ATH79_DEV_WMAC
- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
+ bool "PCI support for AR724x type SoCs"
+ depends on PCI
def_bool n
endif
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index c4f976593061..836dbd4380cb 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
ops-bcm63xx.o
obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
obj-$(CONFIG_PCI_AR2315) += pci-ar2315.o
-obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
+obj-$(CONFIG_PCI_AR71XX) += pci-ar71xx.o
obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o
#
--
2.11.0
next prev parent reply other threads:[~2018-07-20 12:26 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-20 11:58 [PATCH V2 00/25] MIPS: ath79: convert target to pure OF John Crispin
2018-07-20 11:58 ` [PATCH V2 01/25] MIPS: ath79: add lots of missing registers John Crispin
2018-07-20 11:58 ` [PATCH V2 02/25] MIPS: ath79: add support for QCA953x QCA956x TP9343 John Crispin
2018-07-20 11:58 ` [PATCH V2 03/25] MIPS: ath79: select the PINCTRL subsystem John Crispin
2018-07-20 11:58 ` [PATCH V2 04/25] MIPS: ath79: fix register address in ath79_ddr_wb_flush() John Crispin
2018-07-20 15:44 ` Sergei Shtylyov
2018-07-20 17:14 ` Paul Burton
2018-07-20 17:18 ` Paul Burton
2018-07-20 11:58 ` [PATCH V2 05/25] MIPS: ath79: fix system restart John Crispin
2018-07-20 11:58 ` [PATCH V2 06/25] MIPS: ath79: finetune cpu-overrides John Crispin
2018-07-20 11:58 ` [PATCH V2 07/25] MIPS: ath79: enable uart during early_prink John Crispin
2018-07-20 15:47 ` Sergei Shtylyov
2018-07-20 11:58 ` [PATCH V2 08/25] MIPS: ath79: get PCIe controller out of reset John Crispin
2018-07-20 11:58 ` [PATCH V2 09/25] dt-bindings: PCI: qcom,ar7100: adds binding doc John Crispin
2018-07-20 15:51 ` Sergei Shtylyov
2018-07-20 15:58 ` Sergei Shtylyov
2018-07-20 11:58 ` [PATCH V2 10/25] MIPS: pci-ar71xx: convert to OF John Crispin
2018-07-20 11:58 ` [PATCH V2 11/25] dt-bindings: PCI: qcom,ar7240: adds binding doc John Crispin
2018-07-20 16:11 ` Sergei Shtylyov
2018-07-25 17:34 ` Rob Herring
2018-07-20 11:58 ` [PATCH V2 12/25] MIPS: pci-ar724x: convert to OF John Crispin
2018-07-20 11:58 ` [PATCH V2 13/25] MIPS: ath79: add helpers for setting clocks and expose the ref clock John Crispin
2018-07-20 11:58 ` [PATCH V2 14/25] MIPS: ath79: move legacy "wdt" and "uart" clock aliases out of soc init John Crispin
2018-07-20 11:58 ` [PATCH V2 15/25] MIPS: ath79: pass PLL base to clock init functions John Crispin
2018-07-20 11:58 ` [PATCH V2 16/25] MIPS: ath79: make specifying the reference clock in DT optional John Crispin
2018-07-20 11:58 ` [PATCH V2 17/25] MIPS: ath79: support setting up clock via DT on all SoC types John Crispin
2018-07-20 11:58 ` [PATCH V2 18/25] MIPS: ath79: export switch MDIO reference clock John Crispin
2018-07-20 11:58 ` [PATCH V2 19/25] MIPS: ath79: drop legacy IRQ code John Crispin
2018-07-20 11:58 ` [PATCH V2 20/25] MIPS: ath79: drop machfiles John Crispin
2018-07-20 11:58 ` [PATCH V2 21/25] MIPS: ath79: drop legacy pci code John Crispin
2018-07-20 11:58 ` [PATCH V2 22/25] MIPS: ath79: drop platform device registration code John Crispin
2018-07-20 11:58 ` [PATCH V2 23/25] MIPS: ath79: drop !OF clock code John Crispin
2018-07-20 11:58 ` John Crispin [this message]
2018-07-20 11:58 ` [PATCH V2 25/25] spi: ath79: drop pdata support John Crispin
2018-07-25 2:15 ` [PATCH V2 00/25] MIPS: ath79: convert target to pure OF Paul Burton
2018-07-25 5:11 ` John Crispin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180720115842.8406-25-john@phrozen.org \
--to=john@phrozen.org \
--cc=jhogan@kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox