Linux PCI subsystem development
 help / color / mirror / Atom feed
From: Vidya Sagar <vidyas@nvidia.com>
To: Manikanta Maddireddy <mmaddireddy@nvidia.com>,
	"bhelgaas@google.com" <bhelgaas@google.com>,
	"lpieralisi@kernel.org" <lpieralisi@kernel.org>,
	"kwilczynski@kernel.org" <kwilczynski@kernel.org>,
	"mani@kernel.org" <mani@kernel.org>,
	"robh@kernel.org" <robh@kernel.org>,
	"krzk+dt@kernel.org" <krzk+dt@kernel.org>,
	"conor+dt@kernel.org" <conor+dt@kernel.org>,
	"thierry.reding@gmail.com" <thierry.reding@gmail.com>,
	Jon Hunter <jonathanh@nvidia.com>,
	"kishon@kernel.org" <kishon@kernel.org>,
	"arnd@arndb.de" <arnd@arndb.de>,
	"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
	"Frank.Li@nxp.com" <Frank.Li@nxp.com>,
	"den@valinux.co.jp" <den@valinux.co.jp>,
	"hongxing.zhu@nxp.com" <hongxing.zhu@nxp.com>,
	"jingoohan1@gmail.com" <jingoohan1@gmail.com>,
	"cassel@kernel.org" <cassel@kernel.org>,
	"18255117159@163.com" <18255117159@163.com>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-tegra@vger.kernel.org" <linux-tegra@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v6 02/13] PCI: tegra194: Refactor LTSSM state polling on surprise down
Date: Fri, 27 Feb 2026 12:32:45 +0000	[thread overview]
Message-ID: <0d183970-eb68-4139-aba1-27662691f36d@nvidia.com> (raw)
In-Reply-To: <20260223184151.3083221-3-mmaddireddy@nvidia.com>

On 24/02/26 00:11, Manikanta Maddireddy wrote:
> From: Vidya Sagar <vidyas@nvidia.com>
> 
> On surprise down, LTSSM state transits from L0 -> Recovery.RcvrLock ->
> Recovery.RcvrSpeed -> Gen1 Recovery.RcvrLock -> Detect. Recovery.RcvrLock
> and Recovery.RcvrSpeed transit times are 24 msec and 48 msec respectively.
> So, the total time taken to transit from L0 to detect state is ~96 msec.
> Hence, increase the poll time to 120 msec.
> 
> Disable the LTSSM state after it transits to detect to avoid LTSSM
> toggling between polling and detect states.
> 
> tegra_pcie_dw_pme_turnoff() function is called in non-atomic context
> only, so use the non-atomic poll function.
> 
> Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support")
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
> ---
> Changes V5 -> V6: Retain only one fixes tag
> Changes V1 -> V5: None
> 
>  drivers/pci/controller/dwc/pcie-tegra194.c | 55 +++++++++++++---------
>  1 file changed, 32 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index 96d38571a7e7..4ac6b1cea13f 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -137,7 +137,11 @@
>  #define APPL_DEBUG_PM_LINKST_IN_L0		0x11
>  #define APPL_DEBUG_LTSSM_STATE_MASK		GENMASK(8, 3)
>  #define APPL_DEBUG_LTSSM_STATE_SHIFT		3
> -#define LTSSM_STATE_PRE_DETECT			5
> +#define LTSSM_STATE_DETECT_QUIET		0x00
> +#define LTSSM_STATE_DETECT_ACT			0x08
> +#define LTSSM_STATE_PRE_DETECT_QUIET		0x28
> +#define LTSSM_STATE_DETECT_WAIT			0x30
> +#define LTSSM_STATE_L2_IDLE			0xa8
>  
>  #define APPL_RADM_STATUS			0xE4
>  #define APPL_PM_XMT_TURNOFF_STATE		BIT(0)
> @@ -201,7 +205,8 @@
>  #define PME_ACK_DELAY		100   /* 100 us */
>  #define PME_ACK_TIMEOUT		10000 /* 10 ms */
>  
> -#define LTSSM_TIMEOUT 50000	/* 50ms */
> +#define LTSSM_DELAY		10000	/* 10 ms */
> +#define LTSSM_TIMEOUT		120000	/* 120 ms */
>  
>  #define GEN3_GEN4_EQ_PRESET_INIT	5
>  
> @@ -1591,23 +1596,22 @@ static void tegra_pcie_dw_pme_turnoff(struct tegra_pcie_dw *pcie)
>  		data &= ~APPL_PINMUX_PEX_RST;
>  		appl_writel(pcie, data, APPL_PINMUX);
>  
> +		err = readl_poll_timeout(pcie->appl_base + APPL_DEBUG, data,
> +			((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_QUIET) ||
> +			((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_ACT) ||
> +			((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_PRE_DETECT_QUIET) ||
> +			((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_WAIT),
> +			LTSSM_DELAY, LTSSM_TIMEOUT);
> +		if (err)
> +			dev_info(pcie->dev, "Link didn't go to detect state\n");
> +
>  		/*
> -		 * Some cards do not go to detect state even after de-asserting
> -		 * PERST#. So, de-assert LTSSM to bring link to detect state.
> +		 * Deassert LTSSM state to stop the state toggling between
> +		 * polling and detect.
>  		 */
>  		data = readl(pcie->appl_base + APPL_CTRL);
>  		data &= ~APPL_CTRL_LTSSM_EN;
>  		writel(data, pcie->appl_base + APPL_CTRL);
> -
> -		err = readl_poll_timeout_atomic(pcie->appl_base + APPL_DEBUG,
> -						data,
> -						((data &
> -						APPL_DEBUG_LTSSM_STATE_MASK) >>
> -						APPL_DEBUG_LTSSM_STATE_SHIFT) ==
> -						LTSSM_STATE_PRE_DETECT,
> -						1, LTSSM_TIMEOUT);
> -		if (err)
> -			dev_info(pcie->dev, "Link didn't go to detect state\n");
>  	}
>  	/*
>  	 * DBI registers may not be accessible after this as PLL-E would be
> @@ -1681,19 +1685,24 @@ static void pex_ep_event_pex_rst_assert(struct tegra_pcie_dw *pcie)
>  	if (pcie->ep_state == EP_STATE_DISABLED)
>  		return;
>  
> -	/* Disable LTSSM */
> +	ret = readl_poll_timeout(pcie->appl_base + APPL_DEBUG, val,
> +		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_QUIET) ||
> +		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_ACT) ||
> +		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_PRE_DETECT_QUIET) ||
> +		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_WAIT) ||
> +		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_L2_IDLE),
> +		LTSSM_DELAY, LTSSM_TIMEOUT);
> +	if (ret)
> +		dev_err(pcie->dev, "LTSSM state: 0x%x timeout: %d\n", val, ret);
> +
> +	/*
> +	 * Deassert LTSSM state to stop the state toggling between
> +	 * polling and detect.
> +	 */
>  	val = appl_readl(pcie, APPL_CTRL);
>  	val &= ~APPL_CTRL_LTSSM_EN;
>  	appl_writel(pcie, val, APPL_CTRL);
>  
> -	ret = readl_poll_timeout(pcie->appl_base + APPL_DEBUG, val,
> -				 ((val & APPL_DEBUG_LTSSM_STATE_MASK) >>
> -				 APPL_DEBUG_LTSSM_STATE_SHIFT) ==
> -				 LTSSM_STATE_PRE_DETECT,
> -				 1, LTSSM_TIMEOUT);
> -	if (ret)
> -		dev_err(pcie->dev, "Failed to go Detect state: %d\n", ret);
> -
>  	reset_control_assert(pcie->core_rst);
>  
>  	tegra_pcie_disable_phy(pcie);

Reviewed-by: Vidya Sagar <vidyas@nvidia.com>

  reply	other threads:[~2026-02-27 12:32 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-23 18:41 [PATCH v6 00/13] Fixes to pcie-tegra194 driver Manikanta Maddireddy
2026-02-23 18:41 ` [PATCH v6 01/13] PCI: tegra194: Fix polling delay for L2 state Manikanta Maddireddy
2026-02-27 12:32   ` Vidya Sagar
2026-03-02 23:17   ` Bjorn Helgaas
2026-02-23 18:41 ` [PATCH v6 02/13] PCI: tegra194: Refactor LTSSM state polling on surprise down Manikanta Maddireddy
2026-02-27 12:32   ` Vidya Sagar [this message]
2026-02-23 18:41 ` [PATCH v6 03/13] PCI: tegra194: Don't force the device into the D0 state before L2 Manikanta Maddireddy
2026-02-27 12:33   ` Vidya Sagar
2026-02-23 18:41 ` [PATCH v6 04/13] PCI: tegra194: Disable PERST IRQ only in Endpoint mode Manikanta Maddireddy
2026-02-27 12:33   ` Vidya Sagar
2026-02-23 18:41 ` [PATCH v6 05/13] PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select" Manikanta Maddireddy
2026-02-27 12:33   ` Vidya Sagar
2026-02-23 18:41 ` [PATCH v6 06/13] PCI: tegra194: Disable direct speed change for EP Manikanta Maddireddy
2026-02-27 12:33   ` Vidya Sagar
2026-02-23 18:41 ` [PATCH v6 07/13] PCI: tegra194: Set LTR message request before PCIe link up Manikanta Maddireddy
2026-02-27 12:33   ` Vidya Sagar
2026-03-02 23:27   ` Bjorn Helgaas
2026-02-23 18:41 ` [PATCH v6 08/13] PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP Manikanta Maddireddy
2026-02-27 12:34   ` Vidya Sagar
2026-02-23 18:41 ` [PATCH v6 09/13] PCI: tegra194: Allow system suspend when the Endpoint link is not up Manikanta Maddireddy
2026-02-27 12:34   ` Vidya Sagar
2026-03-02 23:30   ` Bjorn Helgaas
2026-02-23 18:41 ` [PATCH v6 10/13] PCI: tegra194: Free up EP resources during remove() Manikanta Maddireddy
2026-02-27 12:34   ` Vidya Sagar
2026-02-23 18:41 ` [PATCH v6 11/13] PCI: tegra194: Use HW version number Manikanta Maddireddy
2026-02-27 12:34   ` Vidya Sagar
2026-02-23 18:41 ` [PATCH v6 12/13] PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on Manikanta Maddireddy
2026-02-27 12:34   ` Vidya Sagar
2026-02-23 18:41 ` [PATCH v6 13/13] PCI: tegra194: Free resources during controller deinitialization Manikanta Maddireddy
2026-02-27 12:34   ` Vidya Sagar
2026-02-27 16:59 ` [PATCH v6 00/13] Fixes to pcie-tegra194 driver Jon Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0d183970-eb68-4139-aba1-27662691f36d@nvidia.com \
    --to=vidyas@nvidia.com \
    --cc=18255117159@163.com \
    --cc=Frank.Li@nxp.com \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=cassel@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=den@valinux.co.jp \
    --cc=gregkh@linuxfoundation.org \
    --cc=hongxing.zhu@nxp.com \
    --cc=jingoohan1@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=kwilczynski@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=mani@kernel.org \
    --cc=mmaddireddy@nvidia.com \
    --cc=robh@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox