From: Bjorn Helgaas <helgaas@kernel.org>
To: Koichiro Den <den@valinux.co.jp>
Cc: Dave Jiang <dave.jiang@intel.com>,
Davidlohr Bueso <dave@stgolabs.net>,
Jonathan Cameron <jic23@kernel.org>,
Alison Schofield <alison.schofield@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
Dan Williams <djbw@kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Ira Weiny <iweiny@kernel.org>, Li Ming <ming.li@zohomail.com>,
Richard Cheng <icheng@nvidia.com>,
Terry Bowman <terry.bowman@amd.com>,
Alejandro Lucero <alucerop@amd.com>,
linux-cxl@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org
Subject: Re: [PATCH 2/3] cxl: Account for link width in latency calculation
Date: Fri, 9 Oct 2026 10:09:31 -0500 [thread overview]
Message-ID: <20261009150931.GA974538@bhelgaas> (raw)
In-Reply-To: <20261009045452.1107921-3-den@valinux.co.jp>
On Fri, Oct 09, 2026 at 01:54:51PM +0900, Koichiro Den wrote:
> cxl_pci_get_latency() derives bandwidth from the per-lane speed returned
> by pcie_link_speed_mbps(), ignoring the negotiated link width. This
> overestimates the FlitLatency contribution for multi-lane links.
> Sections 2.11.3 and 2.11.4 of the Intel CXL Memory Device Software Guide
> describe the link bandwidth as the product of the negotiated speed and
> width.
>
> Replace pcie_link_speed_mbps() with pcie_link_bandwidth_mbps() and
> migrate both CXL callers (the only users of the API). The new helper
> obtains speed and width from a single Link Status read. The CXL
> bandwidth calculation no longer needs a separate width read and
> multiplication.
>
> While at it, make error handling more robust by converting PCI config
> read errors to negative errno values and checking for zero bandwidth
> before calculating latency.
>
> Fixes: 4d07a05397c8 ("cxl: Calculate and store PCI link latency for the downstream ports")
> Cc: stable@vger.kernel.org
> Signed-off-by: Koichiro Den <den@valinux.co.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci/pci.c
> ---
> drivers/cxl/core/pci.c | 22 ++++++++--------------
> drivers/pci/pci.c | 23 ++++++++++++++++++-----
> include/linux/pci.h | 2 +-
> 3 files changed, 27 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
> index 43b9b7afff29..8b52621ffea1 100644
> --- a/drivers/cxl/core/pci.c
> +++ b/drivers/cxl/core/pci.c
> @@ -660,8 +660,8 @@ long cxl_pci_get_latency(struct pci_dev *pdev)
> {
> long bw;
>
> - bw = pcie_link_speed_mbps(pdev);
> - if (bw < 0)
> + bw = pcie_link_bandwidth_mbps(pdev);
> + if (bw <= 0)
> return 0;
> bw /= BITS_PER_BYTE;
>
> @@ -765,18 +765,12 @@ EXPORT_SYMBOL_NS_GPL(cxl_pci_setup_regs, "CXL");
>
> int cxl_pci_get_bandwidth(struct pci_dev *pdev, struct access_coordinate *c)
> {
> - int speed, bw;
> - u16 lnksta;
> - u32 width;
> -
> - speed = pcie_link_speed_mbps(pdev);
> - if (speed < 0)
> - return speed;
> - speed /= BITS_PER_BYTE;
> -
> - pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnksta);
> - width = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta);
> - bw = speed * width;
> + int bw;
> +
> + bw = pcie_link_bandwidth_mbps(pdev);
> + if (bw < 0)
> + return bw;
> + bw /= BITS_PER_BYTE;
>
> for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) {
> c[i].read_bandwidth = bw;
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index b2879a6be5f8..aa3d180de56e 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -5980,18 +5980,31 @@ static enum pci_bus_speed to_pcie_link_speed(u16 lnksta)
> return pcie_link_speed[FIELD_GET(PCI_EXP_LNKSTA_CLS, lnksta)];
> }
>
> -int pcie_link_speed_mbps(struct pci_dev *pdev)
> +/**
> + * pcie_link_bandwidth_mbps - get the current bandwidth of a single PCIe link
> + * @pdev: PCI device to query
> + *
> + * The bandwidth includes all negotiated lanes and does not account for
> + * encoding overhead. A negotiated width of zero gives zero bandwidth.
> + *
> + * Return: Bandwidth in Mb/s, or a negative errno on failure.
> + */
> +int pcie_link_bandwidth_mbps(struct pci_dev *pdev)
> {
> u16 lnksta;
> - int err;
> + int speed, err;
>
> err = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnksta);
> if (err)
> - return err;
> + return pcibios_err_to_errno(err);
> +
> + speed = pcie_dev_speed_mbps(to_pcie_link_speed(lnksta));
> + if (speed < 0)
> + return speed;
>
> - return pcie_dev_speed_mbps(to_pcie_link_speed(lnksta));
> + return speed * FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta);
> }
> -EXPORT_SYMBOL(pcie_link_speed_mbps);
> +EXPORT_SYMBOL(pcie_link_bandwidth_mbps);
>
> /**
> * pcie_bandwidth_available - determine minimum link settings of a PCIe
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index d31a8d107b1e..bbfb0b98ff46 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -1477,7 +1477,7 @@ int pcie_set_mps(struct pci_dev *dev, int mps);
> u32 pcie_bandwidth_available(struct pci_dev *dev, struct pci_dev **limiting_dev,
> enum pci_bus_speed *speed,
> enum pcie_link_width *width);
> -int pcie_link_speed_mbps(struct pci_dev *pdev);
> +int pcie_link_bandwidth_mbps(struct pci_dev *pdev);
> void pcie_print_link_status(struct pci_dev *dev);
> int pcie_reset_flr(struct pci_dev *dev, bool probe);
> int pcie_flr(struct pci_dev *dev);
> --
> 2.51.0
>
next prev parent reply other threads:[~2026-10-09 15:09 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-09 4:54 [PATCH 0/3] cxl: Fix link latency calculations and QTG latency units Koichiro Den
2026-10-09 4:54 ` [PATCH 1/3] cxl/port: Convert PCIe link latency to nanoseconds Koichiro Den
2026-10-09 5:02 ` sashiko-bot
2026-10-09 18:22 ` Alison Schofield
2026-10-09 4:54 ` [PATCH 2/3] cxl: Account for link width in latency calculation Koichiro Den
2026-10-09 5:01 ` sashiko-bot
2026-10-09 15:09 ` Bjorn Helgaas [this message]
2026-10-09 18:26 ` Alison Schofield
2026-10-09 4:54 ` [PATCH 3/3] cxl/acpi: Convert QTG _DSM latencies to picoseconds Koichiro Den
2026-10-09 5:02 ` sashiko-bot
2026-10-09 18:27 ` Alison Schofield
2026-10-09 17:15 ` [PATCH 0/3] cxl: Fix link latency calculations and QTG latency units Dave Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261009150931.GA974538@bhelgaas \
--to=helgaas@kernel.org \
--cc=alison.schofield@intel.com \
--cc=alucerop@amd.com \
--cc=bhelgaas@google.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=den@valinux.co.jp \
--cc=djbw@kernel.org \
--cc=icheng@nvidia.com \
--cc=iweiny@kernel.org \
--cc=jic23@kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=ming.li@zohomail.com \
--cc=terry.bowman@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox