[PATCH 0/5] pci: qcom: Add QCS8300 PCIe support

[PATCH 0/5] pci: qcom: Add QCS8300 PCIe support

[Ziyue Zhang]

Update the relavent DT bindings for PCIe, add new config to the phy
driver add pcie and phy nodes to the .dtsi file and enable then in 
board .dts file for the qcs8300-ride platform.

build dependencies:
-devicetree: https://lore.kernel.org/all/20240925-qcs8300_initial_dtsi-v2-0-494c40fa2a42@quicinc.com/
- tlmm: https://lore.kernel.org/linux-arm-msm/20240819064933.1778204-1-quic_jingyw@quicinc.com/
- gcc: https://lore.kernel.org/all/20240822-qcs8300-gcc-v2-0-b310dfa70ad8@quicinc.com/
- interconnect: https://lore.kernel.org/linux-arm-msm/20240910101013.3020-1-quic_rlaggysh@quicinc.com/

Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
Have follwing changes:
	- Document the QMP PCIe PHY on the QCS8300 platform.
	- Add dedicated schema for the PCIe controllers found on QCS8300.
	- Add compatible for qcs8300 platform.
	- Add configurations in devicetree for PCIe0, including registers, clocks, interrupts and phy setting sequence.
	- Add configurations in devicetree for PCIe1, including registers, clocks, interrupts and phy setting sequence.

Ziyue Zhang (5):
  dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS8300 QMP
    PCIe PHY Gen4 x2
  phy: qcom-qmp-pcie: add dual lane PHY support for QCS8300
  dt-bindings: PCI: qcom,pcie-sa8775p: document qcs8300
  arm64: dts: qcom: qcs8300: enable pcie0 for QCS8300
  arm64: dts: qcom: qcs8300: enable pcie1 for QCS8300

 .../bindings/pci/qcom,pcie-sa8775p.yaml       |   7 +-
 .../phy/qcom,sc8280xp-qmp-pcie-phy.yaml       |   2 +
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts     |  86 ++++-
 arch/arm64/boot/dts/qcom/qcs8300.dtsi         | 355 ++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      |  89 +++++
 5 files changed, 536 insertions(+), 3 deletions(-)


base-commit: eb6a0b56032c62351a59a12915a89428bce68d1d
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS8300 QMP PCIe PHY Gen4 x2

[Ziyue Zhang]

Document the QMP PCIe PHY on the QCS8300 platform.

Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
 .../devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml     | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index dcf4fa55fbba..6eeeee64338e 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -16,6 +16,7 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,qcs8300-qmp-gen4x2-pcie-phy
       - qcom,sa8775p-qmp-gen4x2-pcie-phy
       - qcom,sa8775p-qmp-gen4x4-pcie-phy
       - qcom,sc8180x-qmp-pcie-phy
@@ -184,6 +185,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,qcs8300-qmp-gen4x2-pcie-phy
               - qcom,sa8775p-qmp-gen4x2-pcie-phy
               - qcom,sa8775p-qmp-gen4x4-pcie-phy
     then:
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS8300 QMP PCIe PHY Gen4 x2

[Rob Herring (Arm)]

On Thu, 14 Nov 2024 17:54:05 +0800, Ziyue Zhang wrote:
> Document the QMP PCIe PHY on the QCS8300 platform.
> 
> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
> ---
>  .../devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml     | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 2/5] phy: qcom-qmp-pcie: add dual lane PHY support for QCS8300

[Ziyue Zhang]

The PCIe Gen4x2 PHY for qcs8300 has a lot of difference with sa8775p.
So the qcs8300_qmp_gen4x2_pcie_rx_alt_tbl for qcs8300 is added.

Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 89 ++++++++++++++++++++++++
 1 file changed, 89 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index f71787fb4d7e..b7d4f37024cf 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -726,6 +726,58 @@ static const struct qmp_phy_init_tbl ipq9574_gen3x2_pcie_pcs_misc_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
 };
 
+static const struct qmp_phy_init_tbl qcs8300_qmp_gen4x2_pcie_rx_alt_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B0, 0x9b),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1, 0xb0),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0xd2),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3, 0xf0),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B4, 0x42),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0x9b),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B1, 0xfb),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0xd2),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B3, 0xec),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B4, 0x43),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B5, 0xdd),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B6, 0x0d),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xf3),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B1, 0xf8),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xec),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xd6),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x83),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xf5),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x5e),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_PHPRE_CTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3, 0x37),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_3, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_Q_PI_INTRINSIC_BIAS_RATE32, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_SO_GAIN_RATE3, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_CNTRL1, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x7c),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_IDAC_SAOFFSET, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_DAC_ENABLE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_GM_CAL, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f),
+};
+
 static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
 	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
@@ -3114,6 +3166,40 @@ static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
 	.skip_start_delay	= true,
 };
 
+static const struct qmp_phy_cfg qcs8300_qmp_gen4x2_pciephy_cfg = {
+	.lanes			= 2,
+	.offsets		= &qmp_pcie_offsets_v5_20,
+
+	.tbls = {
+		.serdes		= sa8775p_qmp_gen4x2_pcie_serdes_alt_tbl,
+		.serdes_num		= ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_serdes_alt_tbl),
+		.tx		= sa8775p_qmp_gen4_pcie_tx_tbl,
+		.tx_num		= ARRAY_SIZE(sa8775p_qmp_gen4_pcie_tx_tbl),
+		.rx		= qcs8300_qmp_gen4x2_pcie_rx_alt_tbl,
+		.rx_num		= ARRAY_SIZE(qcs8300_qmp_gen4x2_pcie_rx_alt_tbl),
+		.pcs		= sa8775p_qmp_gen4x2_pcie_pcs_alt_tbl,
+		.pcs_num		= ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_pcs_alt_tbl),
+		.pcs_misc		= sa8775p_qmp_gen4_pcie_pcs_misc_tbl,
+		.pcs_misc_num	= ARRAY_SIZE(sa8775p_qmp_gen4_pcie_pcs_misc_tbl),
+	},
+
+	.tbls_rc = &(const struct qmp_phy_cfg_tbls) {
+		.serdes		= sa8775p_qmp_gen4x2_pcie_rc_serdes_alt_tbl,
+		.serdes_num	= ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_rc_serdes_alt_tbl),
+		.pcs_misc	= sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl,
+		.pcs_misc_num	= ARRAY_SIZE(sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl),
+	},
+
+	.reset_list		= sdm845_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= pciephy_v5_20_regs_layout,
+
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.phy_status		= PHYSTATUS_4_20,
+};
+
 static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
 	.lanes			= 2,
 
@@ -4400,6 +4486,9 @@ static const struct of_device_id qmp_pcie_of_match_table[] = {
 	}, {
 		.compatible = "qcom,msm8998-qmp-pcie-phy",
 		.data = &msm8998_pciephy_cfg,
+	}, {
+		.compatible = "qcom,qcs8300-qmp-gen4x2-pcie-phy",
+		.data = &qcs8300_qmp_gen4x2_pciephy_cfg,
 	}, {
 		.compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy",
 		.data = &sa8775p_qmp_gen4x2_pciephy_cfg,
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 2/5] phy: qcom-qmp-pcie: add dual lane PHY support for QCS8300

[Dmitry Baryshkov]

On Thu, Nov 14, 2024 at 05:54:06PM +0800, Ziyue Zhang wrote:
> The PCIe Gen4x2 PHY for qcs8300 has a lot of difference with sa8775p.
> So the qcs8300_qmp_gen4x2_pcie_rx_alt_tbl for qcs8300 is added.
> 
> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 89 ++++++++++++++++++++++++
>  1 file changed, 89 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 3/5] dt-bindings: PCI: qcom,pcie-sa8775p: document qcs8300

[Ziyue Zhang]

Add compatible for qcs8300 platform.

Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
 .../devicetree/bindings/pci/qcom,pcie-sa8775p.yaml         | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
index efde49d1bef8..19e3ee1b380d 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
@@ -16,7 +16,12 @@ description:
 
 properties:
   compatible:
-    const: qcom,pcie-sa8775p
+    oneOf:
+      - const: qcom,pcie-sa8775p
+      - items:
+          - enum:
+              - qcom,pcie-qcs8300
+          - const: qcom,pcie-sa8775p
 
   reg:
     minItems: 6
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 3/5] dt-bindings: PCI: qcom,pcie-sa8775p: document qcs8300

[Rob Herring (Arm)]

On Thu, 14 Nov 2024 17:54:07 +0800, Ziyue Zhang wrote:
> Add compatible for qcs8300 platform.
> 
> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
> ---
>  .../devicetree/bindings/pci/qcom,pcie-sa8775p.yaml         | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 4/5] arm64: dts: qcom: qcs8300: enable pcie0 for QCS8300

[Ziyue Zhang]

Add configurations in devicetree for PCIe0, including registers, clocks,
interrupts and phy setting sequence.

Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts |  44 +++++-
 arch/arm64/boot/dts/qcom/qcs8300.dtsi     | 176 ++++++++++++++++++++++
 2 files changed, 219 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index 7eed19a694c3..9d7c8555ed38 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -213,7 +213,7 @@ vreg_l9c: ldo9 {
 &gcc {
 	clocks = <&rpmhcc RPMH_CXO_CLK>,
 		 <&sleep_clk>,
-		 <0>,
+		 <&pcie0_phy>,
 		 <0>,
 		 <0>,
 		 <0>,
@@ -223,6 +223,23 @@ &gcc {
 		 <0>;
 };
 
+&pcie0 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l6a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -247,6 +264,31 @@ &rpmhcc {
 	clock-names = "xo";
 };
 
+&tlmm {
+	pcie0_default_state: pcie0-default-state {
+		perst-pins {
+			pins = "gpio2";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio1";
+			function = "pcie0_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio0";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
 &uart7 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
index 2c35f96c3f28..d4924f48b347 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -637,6 +637,182 @@ mmss_noc: interconnect@17a0000 {
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-qcs8300","qcom,pcie-sa8775p";
+			reg = <0x0 0x01c00000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf20>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x4000>,
+			      <0x0 0x40100000 0x0 0x100000>,
+			      <0x0 0x01c03000 0x0 0x1000>;
+
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <0>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
+
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
+				    <0x100 &pcie_smmu 0x0001 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+			power-domains = <&gcc GCC_PCIE_0_GDSC>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+
+			pcie3_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 and GEN 4 x1 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+				/* GEN 4 x2 */
+				opp-32000000 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3938000 1>;
+				};
+			};
+
+			pcieport0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+				bus-range = <0x01 0xff>;
+			};
+		};
+
+		pcie0_phy: phy@1c04000 {
+			compatible = "qcom,qcs8300-qmp-gen4x2-pcie-phy";
+			reg = <0x0 0x1c04000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_PIPEDIV2_CLK>,
+				 <&gcc GCC_PCIE_0_PHY_AUX_CLK>;
+
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe",
+				      "pipediv2",
+				      "phy_aux";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		ufs_mem_hc: ufs@1d84000 {
 			compatible = "qcom,qcs8300-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>;
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 4/5] arm64: dts: qcom: qcs8300: enable pcie0 for QCS8300

[Dmitry Baryshkov]

On Thu, Nov 14, 2024 at 05:54:08PM +0800, Ziyue Zhang wrote:
> Add configurations in devicetree for PCIe0, including registers, clocks,
> interrupts and phy setting sequence.
> 
> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qcs8300-ride.dts |  44 +++++-
>  arch/arm64/boot/dts/qcom/qcs8300.dtsi     | 176 ++++++++++++++++++++++
>  2 files changed, 219 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> index 7eed19a694c3..9d7c8555ed38 100644
> --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> @@ -213,7 +213,7 @@ vreg_l9c: ldo9 {
>  &gcc {

The patch doesn't seem to update the gcc node in qcs8300.dtsi. Is there
any reason to have the clocks property in the board data file?

>  	clocks = <&rpmhcc RPMH_CXO_CLK>,
>  		 <&sleep_clk>,
> -		 <0>,
> +		 <&pcie0_phy>,
>  		 <0>,
>  		 <0>,
>  		 <0>,
> @@ -223,6 +223,23 @@ &gcc {
>  		 <0>;
>  };
>  
> +&pcie0 {
> +	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
> +	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
> +
> +	pinctrl-0 = <&pcie0_default_state>;
> +	pinctrl-names = "default";
> +
> +	status = "okay";
> +};
> +
> +&pcie0_phy {
> +	vdda-phy-supply = <&vreg_l6a>;
> +	vdda-pll-supply = <&vreg_l5a>;
> +
> +	status = "okay";
> +};
> +
>  &qupv3_id_0 {
>  	status = "okay";
>  };
> @@ -247,6 +264,31 @@ &rpmhcc {
>  	clock-names = "xo";
>  };
>  
> +&tlmm {
> +	pcie0_default_state: pcie0-default-state {
> +		perst-pins {
> +			pins = "gpio2";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-pull-down;
> +		};
> +
> +		clkreq-pins {
> +			pins = "gpio1";
> +			function = "pcie0_clkreq";
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +
> +		wake-pins {
> +			pins = "gpio0";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +	};
> +};
> +
>  &uart7 {
>  	status = "okay";
>  };
> diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> index 2c35f96c3f28..d4924f48b347 100644
> --- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> @@ -637,6 +637,182 @@ mmss_noc: interconnect@17a0000 {
>  			qcom,bcm-voters = <&apps_bcm_voter>;
>  		};
>  
> +		pcie0: pci@1c00000 {
> +			compatible = "qcom,pcie-qcs8300","qcom,pcie-sa8775p";
> +			reg = <0x0 0x01c00000 0x0 0x3000>,
> +			      <0x0 0x40000000 0x0 0xf20>,
> +			      <0x0 0x40000f20 0x0 0xa8>,
> +			      <0x0 0x40001000 0x0 0x4000>,
> +			      <0x0 0x40100000 0x0 0x100000>,
> +			      <0x0 0x01c03000 0x0 0x1000>;
> +
> +			reg-names = "parf",
> +				    "dbi",
> +				    "elbi",
> +				    "atu",
> +				    "config",
> +				    "mhi";
> +
> +			device_type = "pci";
> +
> +			#address-cells = <3>;
> +			#size-cells = <2>;
> +			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
> +				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
> +			bus-range = <0x00 0xff>;
> +
> +			dma-coherent;
> +
> +			linux,pci-domain = <0>;
> +			num-lanes = <2>;
> +
> +			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
> +
> +			interrupt-names = "msi0",
> +					  "msi1",
> +					  "msi2",
> +					  "msi3",
> +					  "msi4",
> +					  "msi5",
> +					  "msi6",
> +					  "msi7";
> +
> +			#interrupt-cells = <1>;
> +			interrupt-map-mask = <0 0 0 0x7>;
> +			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
> +					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
> +					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
> +					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
> +
> +			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
> +				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> +				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
> +				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
> +				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
> +
> +			clock-names = "aux",
> +				      "cfg",
> +				      "bus_master",
> +				      "bus_slave",
> +				      "slave_q2a";
> +
> +			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
> +			assigned-clock-rates = <19200000>;
> +
> +			interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
> +					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
> +
> +			interconnect-names = "pcie-mem", "cpu-pcie";
> +
> +			iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
> +				    <0x100 &pcie_smmu 0x0001 0x1>;
> +
> +			resets = <&gcc GCC_PCIE_0_BCR>;
> +			reset-names = "pci";
> +			power-domains = <&gcc GCC_PCIE_0_GDSC>;
> +
> +			phys = <&pcie0_phy>;
> +			phy-names = "pciephy";
> +
> +			status = "disabled";
> +
> +			pcie3_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				/* GEN 1 x1 */
> +				opp-2500000 {
> +					opp-hz = /bits/ 64 <2500000>;
> +					required-opps = <&rpmhpd_opp_svs_l1>;
> +					opp-peak-kBps = <250000 1>;
> +				};
> +
> +				/* GEN 1 x2 and GEN 2 x1 */
> +				opp-5000000 {
> +					opp-hz = /bits/ 64 <5000000>;
> +					required-opps = <&rpmhpd_opp_svs_l1>;
> +					opp-peak-kBps = <500000 1>;
> +				};
> +
> +				/* GEN 2 x2 */
> +				opp-10000000 {
> +					opp-hz = /bits/ 64 <10000000>;
> +					required-opps = <&rpmhpd_opp_svs_l1>;
> +					opp-peak-kBps = <1000000 1>;
> +				};
> +
> +				/* GEN 3 x1 */
> +				opp-8000000 {
> +					opp-hz = /bits/ 64 <8000000>;
> +					required-opps = <&rpmhpd_opp_svs_l1>;
> +					opp-peak-kBps = <984500 1>;
> +				};
> +
> +				/* GEN 3 x2 and GEN 4 x1 */
> +				opp-16000000 {
> +					opp-hz = /bits/ 64 <16000000>;
> +					required-opps = <&rpmhpd_opp_nom>;
> +					opp-peak-kBps = <1969000 1>;
> +				};
> +
> +				/* GEN 4 x2 */
> +				opp-32000000 {
> +					opp-hz = /bits/ 64 <32000000>;
> +					required-opps = <&rpmhpd_opp_nom>;
> +					opp-peak-kBps = <3938000 1>;
> +				};
> +			};
> +
> +			pcieport0: pcie@0 {
> +				device_type = "pci";
> +				reg = <0x0 0x0 0x0 0x0 0x0>;
> +				#address-cells = <3>;
> +				#size-cells = <2>;
> +				ranges;
> +				bus-range = <0x01 0xff>;
> +			};
> +		};
> +
> +		pcie0_phy: phy@1c04000 {
> +			compatible = "qcom,qcs8300-qmp-gen4x2-pcie-phy";
> +			reg = <0x0 0x1c04000 0x0 0x2000>;
> +
> +			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
> +				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> +				 <&gcc GCC_PCIE_CLKREF_EN>,
> +				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
> +				 <&gcc GCC_PCIE_0_PIPE_CLK>,
> +				 <&gcc GCC_PCIE_0_PIPEDIV2_CLK>,
> +				 <&gcc GCC_PCIE_0_PHY_AUX_CLK>;
> +
> +			clock-names = "aux",
> +				      "cfg_ahb",
> +				      "ref",
> +				      "rchng",
> +				      "pipe",
> +				      "pipediv2",
> +				      "phy_aux";
> +
> +			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
> +			assigned-clock-rates = <100000000>;
> +
> +			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
> +			reset-names = "phy";
> +
> +			#clock-cells = <0>;
> +			clock-output-names = "pcie_0_pipe_clk";
> +
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
>  		ufs_mem_hc: ufs@1d84000 {
>  			compatible = "qcom,qcs8300-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
>  			reg = <0x0 0x01d84000 0x0 0x3000>;
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 4/5] arm64: dts: qcom: qcs8300: enable pcie0 for QCS8300

[Konrad Dybcio]

On 14.11.2024 1:10 PM, Dmitry Baryshkov wrote:
> On Thu, Nov 14, 2024 at 05:54:08PM +0800, Ziyue Zhang wrote:
>> Add configurations in devicetree for PCIe0, including registers, clocks,
>> interrupts and phy setting sequence.
>>
>> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
>> ---
>>  arch/arm64/boot/dts/qcom/qcs8300-ride.dts |  44 +++++-
>>  arch/arm64/boot/dts/qcom/qcs8300.dtsi     | 176 ++++++++++++++++++++++
>>  2 files changed, 219 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>> index 7eed19a694c3..9d7c8555ed38 100644
>> --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>> +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>> @@ -213,7 +213,7 @@ vreg_l9c: ldo9 {
>>  &gcc {
> 
> The patch doesn't seem to update the gcc node in qcs8300.dtsi. Is there
> any reason to have the clocks property in the board data file?

Definitely not. Ziyue, please move that change to the soc dtsi

Konrad

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 4/5] arm64: dts: qcom: qcs8300: enable pcie0 for QCS8300

[Tingwei Zhang]

On 11/14/2024 9:03 PM, Konrad Dybcio wrote:
> On 14.11.2024 1:10 PM, Dmitry Baryshkov wrote:
>> On Thu, Nov 14, 2024 at 05:54:08PM +0800, Ziyue Zhang wrote:
>>> Add configurations in devicetree for PCIe0, including registers, clocks,
>>> interrupts and phy setting sequence.
>>>
>>> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
>>> ---
>>>   arch/arm64/boot/dts/qcom/qcs8300-ride.dts |  44 +++++-
>>>   arch/arm64/boot/dts/qcom/qcs8300.dtsi     | 176 ++++++++++++++++++++++
>>>   2 files changed, 219 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>>> index 7eed19a694c3..9d7c8555ed38 100644
>>> --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>>> +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>>> @@ -213,7 +213,7 @@ vreg_l9c: ldo9 {
>>>   &gcc {
>>
>> The patch doesn't seem to update the gcc node in qcs8300.dtsi. Is there
>> any reason to have the clocks property in the board data file?
> 
> Definitely not. Ziyue, please move that change to the soc dtsi

Gcc node is updated in board device tree due to sleep_clk is defined in 
board device tree. Sleep_clk is from PMIC instead SoC so we were 
requested to move sleep_clk to board device tree in previous review [1].

[1]https://lore.kernel.org/all/10914199-1e86-4a2e-aec8-2a48cc49ef14@kernel.org/
> 
> Konrad


-- 
Thanks,
Tingwei

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 4/5] arm64: dts: qcom: qcs8300: enable pcie0 for QCS8300

[Dmitry Baryshkov]

On Fri, Nov 15, 2024 at 12:59:12PM +0800, Tingwei Zhang wrote:
> On 11/14/2024 9:03 PM, Konrad Dybcio wrote:
> > On 14.11.2024 1:10 PM, Dmitry Baryshkov wrote:
> > > On Thu, Nov 14, 2024 at 05:54:08PM +0800, Ziyue Zhang wrote:
> > > > Add configurations in devicetree for PCIe0, including registers, clocks,
> > > > interrupts and phy setting sequence.
> > > > 
> > > > Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
> > > > ---
> > > >   arch/arm64/boot/dts/qcom/qcs8300-ride.dts |  44 +++++-
> > > >   arch/arm64/boot/dts/qcom/qcs8300.dtsi     | 176 ++++++++++++++++++++++
> > > >   2 files changed, 219 insertions(+), 1 deletion(-)
> > > > 
> > > > diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> > > > index 7eed19a694c3..9d7c8555ed38 100644
> > > > --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> > > > +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> > > > @@ -213,7 +213,7 @@ vreg_l9c: ldo9 {
> > > >   &gcc {
> > > 
> > > The patch doesn't seem to update the gcc node in qcs8300.dtsi. Is there
> > > any reason to have the clocks property in the board data file?
> > 
> > Definitely not. Ziyue, please move that change to the soc dtsi
> 
> Gcc node is updated in board device tree due to sleep_clk is defined in
> board device tree. Sleep_clk is from PMIC instead SoC so we were requested
> to move sleep_clk to board device tree in previous review [1].

Note, the review doesn't talk about sleep_clk at all. The recent
examples (sm8650, x1e80100, sa8775p) still pull the clocks into the SoC
dtsi, but without the freq.

> 
> [1]https://lore.kernel.org/all/10914199-1e86-4a2e-aec8-2a48cc49ef14@kernel.org/
> > 
> > Konrad
> 
> 
> -- 
> Thanks,
> Tingwei
> 
> -- 
> linux-phy mailing list
> linux-phy@lists.infradead.org
> https://lists.infradead.org/mailman/listinfo/linux-phy

-- 
With best wishes
Dmitry

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 4/5] arm64: dts: qcom: qcs8300: enable pcie0 for QCS8300

[Tingwei Zhang]

On 11/15/2024 2:26 PM, Dmitry Baryshkov wrote:
> On Fri, Nov 15, 2024 at 12:59:12PM +0800, Tingwei Zhang wrote:
>> On 11/14/2024 9:03 PM, Konrad Dybcio wrote:
>>> On 14.11.2024 1:10 PM, Dmitry Baryshkov wrote:
>>>> On Thu, Nov 14, 2024 at 05:54:08PM +0800, Ziyue Zhang wrote:
>>>>> Add configurations in devicetree for PCIe0, including registers, clocks,
>>>>> interrupts and phy setting sequence.
>>>>>
>>>>> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
>>>>> ---
>>>>>    arch/arm64/boot/dts/qcom/qcs8300-ride.dts |  44 +++++-
>>>>>    arch/arm64/boot/dts/qcom/qcs8300.dtsi     | 176 ++++++++++++++++++++++
>>>>>    2 files changed, 219 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>>>>> index 7eed19a694c3..9d7c8555ed38 100644
>>>>> --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>>>>> +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>>>>> @@ -213,7 +213,7 @@ vreg_l9c: ldo9 {
>>>>>    &gcc {
>>>>
>>>> The patch doesn't seem to update the gcc node in qcs8300.dtsi. Is there
>>>> any reason to have the clocks property in the board data file?
>>>
>>> Definitely not. Ziyue, please move that change to the soc dtsi
>>
>> Gcc node is updated in board device tree due to sleep_clk is defined in
>> board device tree. Sleep_clk is from PMIC instead SoC so we were requested
>> to move sleep_clk to board device tree in previous review [1].
> 
> Note, the review doesn't talk about sleep_clk at all. The recent
> examples (sm8650, x1e80100, sa8775p) still pull the clocks into the SoC
> dtsi, but without the freq.
> 
It's begining of the discussion of the PMIC clock for SoC. Sleep clock 
specific discussion is here [2].
[2]https://lore.kernel.org/all/be8b573c-db4e-4eec-a9a6-3cd83d04156d@kernel.org/
>>
>> [1]https://lore.kernel.org/all/10914199-1e86-4a2e-aec8-2a48cc49ef14@kernel.org/
>>>
>>> Konrad
>>
>>
>> -- 
>> Thanks,
>> Tingwei
>>
>> -- 
>> linux-phy mailing list
>> linux-phy@lists.infradead.org
>> https://lists.infradead.org/mailman/listinfo/linux-phy
> 


-- 
Thanks,
Tingwei

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 4/5] arm64: dts: qcom: qcs8300: enable pcie0 for QCS8300

[Dmitry Baryshkov]

On Fri, Nov 15, 2024 at 02:42:47PM +0800, Tingwei Zhang wrote:
> On 11/15/2024 2:26 PM, Dmitry Baryshkov wrote:
> > On Fri, Nov 15, 2024 at 12:59:12PM +0800, Tingwei Zhang wrote:
> > > On 11/14/2024 9:03 PM, Konrad Dybcio wrote:
> > > > On 14.11.2024 1:10 PM, Dmitry Baryshkov wrote:
> > > > > On Thu, Nov 14, 2024 at 05:54:08PM +0800, Ziyue Zhang wrote:
> > > > > > Add configurations in devicetree for PCIe0, including registers, clocks,
> > > > > > interrupts and phy setting sequence.
> > > > > > 
> > > > > > Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
> > > > > > ---
> > > > > >    arch/arm64/boot/dts/qcom/qcs8300-ride.dts |  44 +++++-
> > > > > >    arch/arm64/boot/dts/qcom/qcs8300.dtsi     | 176 ++++++++++++++++++++++
> > > > > >    2 files changed, 219 insertions(+), 1 deletion(-)
> > > > > > 
> > > > > > diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> > > > > > index 7eed19a694c3..9d7c8555ed38 100644
> > > > > > --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> > > > > > +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> > > > > > @@ -213,7 +213,7 @@ vreg_l9c: ldo9 {
> > > > > >    &gcc {
> > > > > 
> > > > > The patch doesn't seem to update the gcc node in qcs8300.dtsi. Is there
> > > > > any reason to have the clocks property in the board data file?
> > > > 
> > > > Definitely not. Ziyue, please move that change to the soc dtsi
> > > 
> > > Gcc node is updated in board device tree due to sleep_clk is defined in
> > > board device tree. Sleep_clk is from PMIC instead SoC so we were requested
> > > to move sleep_clk to board device tree in previous review [1].
> > 
> > Note, the review doesn't talk about sleep_clk at all. The recent
> > examples (sm8650, x1e80100, sa8775p) still pull the clocks into the SoC
> > dtsi, but without the freq.
> > 
> It's begining of the discussion of the PMIC clock for SoC. Sleep clock
> specific discussion is here [2].
> [2]https://lore.kernel.org/all/be8b573c-db4e-4eec-a9a6-3cd83d04156d@kernel.org/

Please note how the recent platforms describe those clocks: the node in
the SoC dtsi, the frequency in the board dtsi. X1E80100 is a step
backwards, the clock are completely defined in the x1e80100.dtsi. There
seems to be no strict rule on how to handle board clocks. I've sent an
RFC patchset, trying to move them to a single logical location. Let's
see what kind of response it will get. We probably need to define and
follow a common rule for all Qualcomm platforms. Please give it a couple
of days for the dust to settle. However, I think there should be no
reason to keep GCC's clock definitions in the board DTS.

> > > 
> > > [1]https://lore.kernel.org/all/10914199-1e86-4a2e-aec8-2a48cc49ef14@kernel.org/
> > > > 
> > > > Konrad
> > > 
> > > 
> > > -- 
> > > Thanks,
> > > Tingwei
> > > 
> > > -- 
> > > linux-phy mailing list
> > > linux-phy@lists.infradead.org
> > > https://lists.infradead.org/mailman/listinfo/linux-phy
> > 
> 
> 
> -- 
> Thanks,
> Tingwei

-- 
With best wishes
Dmitry

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 4/5] arm64: dts: qcom: qcs8300: enable pcie0 for QCS8300

[Tingwei Zhang]

On 11/15/2024 3:03 PM, Dmitry Baryshkov wrote:
> On Fri, Nov 15, 2024 at 02:42:47PM +0800, Tingwei Zhang wrote:
>> On 11/15/2024 2:26 PM, Dmitry Baryshkov wrote:
>>> On Fri, Nov 15, 2024 at 12:59:12PM +0800, Tingwei Zhang wrote:
>>>> On 11/14/2024 9:03 PM, Konrad Dybcio wrote:
>>>>> On 14.11.2024 1:10 PM, Dmitry Baryshkov wrote:
>>>>>> On Thu, Nov 14, 2024 at 05:54:08PM +0800, Ziyue Zhang wrote:
>>>>>>> Add configurations in devicetree for PCIe0, including registers, clocks,
>>>>>>> interrupts and phy setting sequence.
>>>>>>>
>>>>>>> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
>>>>>>> ---
>>>>>>>     arch/arm64/boot/dts/qcom/qcs8300-ride.dts |  44 +++++-
>>>>>>>     arch/arm64/boot/dts/qcom/qcs8300.dtsi     | 176 ++++++++++++++++++++++
>>>>>>>     2 files changed, 219 insertions(+), 1 deletion(-)
>>>>>>>
>>>>>>> diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>>>>>>> index 7eed19a694c3..9d7c8555ed38 100644
>>>>>>> --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>>>>>>> +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>>>>>>> @@ -213,7 +213,7 @@ vreg_l9c: ldo9 {
>>>>>>>     &gcc {
>>>>>>
>>>>>> The patch doesn't seem to update the gcc node in qcs8300.dtsi. Is there
>>>>>> any reason to have the clocks property in the board data file?
>>>>>
>>>>> Definitely not. Ziyue, please move that change to the soc dtsi
>>>>
>>>> Gcc node is updated in board device tree due to sleep_clk is defined in
>>>> board device tree. Sleep_clk is from PMIC instead SoC so we were requested
>>>> to move sleep_clk to board device tree in previous review [1].
>>>
>>> Note, the review doesn't talk about sleep_clk at all. The recent
>>> examples (sm8650, x1e80100, sa8775p) still pull the clocks into the SoC
>>> dtsi, but without the freq.
>>>
>> It's begining of the discussion of the PMIC clock for SoC. Sleep clock
>> specific discussion is here [2].
>> [2]https://lore.kernel.org/all/be8b573c-db4e-4eec-a9a6-3cd83d04156d@kernel.org/
> 
> Please note how the recent platforms describe those clocks: the node in
> the SoC dtsi, the frequency in the board dtsi. X1E80100 is a step
> backwards, the clock are completely defined in the x1e80100.dtsi. There
> seems to be no strict rule on how to handle board clocks. I've sent an
> RFC patchset, trying to move them to a single logical location. Let's
> see what kind of response it will get. We probably need to define and
> follow a common rule for all Qualcomm platforms. Please give it a couple
> of days for the dust to settle. However, I think there should be no
> reason to keep GCC's clock definitions in the board DTS.
> 
Thanks for the clean up patch and make it consistent.

Is it reasonable for GCC's clock definition to refer xo_clk/sleep_clk in 
board device tree? Theoretically, can we have another board has 
different xo_clk say xo1_clk defined in board device tree?

>>>>
>>>> [1]https://lore.kernel.org/all/10914199-1e86-4a2e-aec8-2a48cc49ef14@kernel.org/
>>>>>
>>>>> Konrad
>>>>
>>>>
>>>> -- 
>>>> Thanks,
>>>> Tingwei
>>>>
>>>> -- 
>>>> linux-phy mailing list
>>>> linux-phy@lists.infradead.org
>>>> https://lists.infradead.org/mailman/listinfo/linux-phy
>>>
>>
>>
>> -- 
>> Thanks,
>> Tingwei
> 


-- 
Thanks,
Tingwei

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 4/5] arm64: dts: qcom: qcs8300: enable pcie0 for QCS8300

[Dmitry Baryshkov]

On Fri, Nov 15, 2024 at 03:16:29PM +0800, Tingwei Zhang wrote:
> On 11/15/2024 3:03 PM, Dmitry Baryshkov wrote:
> > On Fri, Nov 15, 2024 at 02:42:47PM +0800, Tingwei Zhang wrote:
> > > On 11/15/2024 2:26 PM, Dmitry Baryshkov wrote:
> > > > On Fri, Nov 15, 2024 at 12:59:12PM +0800, Tingwei Zhang wrote:
> > > > > On 11/14/2024 9:03 PM, Konrad Dybcio wrote:
> > > > > > On 14.11.2024 1:10 PM, Dmitry Baryshkov wrote:
> > > > > > > On Thu, Nov 14, 2024 at 05:54:08PM +0800, Ziyue Zhang wrote:
> > > > > > > > Add configurations in devicetree for PCIe0, including registers, clocks,
> > > > > > > > interrupts and phy setting sequence.
> > > > > > > > 
> > > > > > > > Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
> > > > > > > > ---
> > > > > > > >     arch/arm64/boot/dts/qcom/qcs8300-ride.dts |  44 +++++-
> > > > > > > >     arch/arm64/boot/dts/qcom/qcs8300.dtsi     | 176 ++++++++++++++++++++++
> > > > > > > >     2 files changed, 219 insertions(+), 1 deletion(-)
> > > > > > > > 
> > > > > > > > diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> > > > > > > > index 7eed19a694c3..9d7c8555ed38 100644
> > > > > > > > --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> > > > > > > > +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> > > > > > > > @@ -213,7 +213,7 @@ vreg_l9c: ldo9 {
> > > > > > > >     &gcc {
> > > > > > > 
> > > > > > > The patch doesn't seem to update the gcc node in qcs8300.dtsi. Is there
> > > > > > > any reason to have the clocks property in the board data file?
> > > > > > 
> > > > > > Definitely not. Ziyue, please move that change to the soc dtsi
> > > > > 
> > > > > Gcc node is updated in board device tree due to sleep_clk is defined in
> > > > > board device tree. Sleep_clk is from PMIC instead SoC so we were requested
> > > > > to move sleep_clk to board device tree in previous review [1].
> > > > 
> > > > Note, the review doesn't talk about sleep_clk at all. The recent
> > > > examples (sm8650, x1e80100, sa8775p) still pull the clocks into the SoC
> > > > dtsi, but without the freq.
> > > > 
> > > It's begining of the discussion of the PMIC clock for SoC. Sleep clock
> > > specific discussion is here [2].
> > > [2]https://lore.kernel.org/all/be8b573c-db4e-4eec-a9a6-3cd83d04156d@kernel.org/
> > 
> > Please note how the recent platforms describe those clocks: the node in
> > the SoC dtsi, the frequency in the board dtsi. X1E80100 is a step
> > backwards, the clock are completely defined in the x1e80100.dtsi. There
> > seems to be no strict rule on how to handle board clocks. I've sent an
> > RFC patchset, trying to move them to a single logical location. Let's
> > see what kind of response it will get. We probably need to define and
> > follow a common rule for all Qualcomm platforms. Please give it a couple
> > of days for the dust to settle. However, I think there should be no
> > reason to keep GCC's clock definitions in the board DTS.
> > 
> Thanks for the clean up patch and make it consistent.
> 
> Is it reasonable for GCC's clock definition to refer xo_clk/sleep_clk in
> board device tree? Theoretically, can we have another board has different
> xo_clk say xo1_clk defined in board device tree?

That's a question for that series. I'd say, no. Some older platforms had
separate CXO and PXO clocks, newer platforms have single CXO.

> > > > > 
> > > > > [1]https://lore.kernel.org/all/10914199-1e86-4a2e-aec8-2a48cc49ef14@kernel.org/
> > > > > > 
> > > > > > Konrad
> > > > > 
> > > > > 
> > > > > -- 
> > > > > Thanks,
> > > > > Tingwei
> > > > > 
> > > > > -- 
> > > > > linux-phy mailing list
> > > > > linux-phy@lists.infradead.org
> > > > > https://lists.infradead.org/mailman/listinfo/linux-phy
> > > > 
> > > 
> > > 
> > > -- 
> > > Thanks,
> > > Tingwei
> > 
> 
> 
> -- 
> Thanks,
> Tingwei

-- 
With best wishes
Dmitry

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 4/5] arm64: dts: qcom: qcs8300: enable pcie0 for QCS8300

[Konrad Dybcio]

On 14.11.2024 10:54 AM, Ziyue Zhang wrote:
> Add configurations in devicetree for PCIe0, including registers, clocks,
> interrupts and phy setting sequence.
> 
> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qcs8300-ride.dts |  44 +++++-
>  arch/arm64/boot/dts/qcom/qcs8300.dtsi     | 176 ++++++++++++++++++++++

This implies this patch should be two separate ones


[...]


> +&tlmm {
> +	pcie0_default_state: pcie0-default-state {
> +		perst-pins {
> +			pins = "gpio2";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-pull-down;
> +		};
> +
> +		clkreq-pins {
> +			pins = "gpio1";
> +			function = "pcie0_clkreq";
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +
> +		wake-pins {
> +			pins = "gpio0";

Sorting these in an increasing order would be welcome


>  
> +		pcie0: pci@1c00000 {
> +			compatible = "qcom,pcie-qcs8300","qcom,pcie-sa8775p";

Missing ' ' after ','

> +			reg = <0x0 0x01c00000 0x0 0x3000>,
> +			      <0x0 0x40000000 0x0 0xf20>,
> +			      <0x0 0x40000f20 0x0 0xa8>,
> +			      <0x0 0x40001000 0x0 0x4000>,
> +			      <0x0 0x40100000 0x0 0x100000>,
> +			      <0x0 0x01c03000 0x0 0x1000>;
> +
> +			reg-names = "parf",
> +				    "dbi",
> +				    "elbi",
> +				    "atu",
> +				    "config",
> +				    "mhi";
> +
> +			device_type = "pci";

Please try to match the style in x1e80100, it's mostly coherent but
things like newlines differ, which is tiny but mildly annoying

> +
> +			#address-cells = <3>;
> +			#size-cells = <2>;
> +			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
> +				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;

Looks like there's a bit more space in there
> +			bus-range = <0x00 0xff>;
> +
> +			dma-coherent;
> +
> +			linux,pci-domain = <0>;
> +			num-lanes = <2>;
> +
> +			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
> +
> +			interrupt-names = "msi0",
> +					  "msi1",
> +					  "msi2",
> +					  "msi3",
> +					  "msi4",
> +					  "msi5",
> +					  "msi6",
> +					  "msi7";

Please also add a "global" interrupt.. looks like it's GIC_SPI 166, but
please confirm

> +
> +			#interrupt-cells = <1>;
> +			interrupt-map-mask = <0 0 0 0x7>;
> +			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
> +					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
> +					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
> +					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
> +
> +			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
> +				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> +				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
> +				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
> +				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
> +
> +			clock-names = "aux",
> +				      "cfg",
> +				      "bus_master",
> +				      "bus_slave",
> +				      "slave_q2a";
> +
> +			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
> +			assigned-clock-rates = <19200000>;
> +
> +			interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,

QCOM_ICC_TAG_ALWAYS

> +					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;

QCOM_ICC_TAG_ACTIVE_ONLY

[...]

> +
> +			pcieport0: pcie@0 {
> +				device_type = "pci";
> +				reg = <0x0 0x0 0x0 0x0 0x0>;
> +				#address-cells = <3>;
> +				#size-cells = <2>;
> +				ranges;
> +				bus-range = <0x01 0xff>;
> +			};

Are you going to use this? If not, please drop

> +		};
> +
> +		pcie0_phy: phy@1c04000 {
> +			compatible = "qcom,qcs8300-qmp-gen4x2-pcie-phy";
> +			reg = <0x0 0x1c04000 0x0 0x2000>;
> +
> +			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,

This clock goes to the RC, it should be _PHY_AUX (which you put below
as phy_aux), please replace it.

> +				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> +				 <&gcc GCC_PCIE_CLKREF_EN>,
> +				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
> +				 <&gcc GCC_PCIE_0_PIPE_CLK>,
> +				 <&gcc GCC_PCIE_0_PIPEDIV2_CLK>,
> +				 <&gcc GCC_PCIE_0_PHY_AUX_CLK>;
> +
> +			clock-names = "aux",
> +				      "cfg_ahb",
> +				      "ref",
> +				      "rchng",
> +				      "pipe",
> +				      "pipediv2",
> +				      "phy_aux";

Konrad

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 4/5] arm64: dts: qcom: qcs8300: enable pcie0 for QCS8300

[Manivannan Sadhasivam]

On Thu, Nov 14, 2024 at 02:02:48PM +0100, Konrad Dybcio wrote:

[...]

> > +
> > +			pcieport0: pcie@0 {
> > +				device_type = "pci";
> > +				reg = <0x0 0x0 0x0 0x0 0x0>;
> > +				#address-cells = <3>;
> > +				#size-cells = <2>;
> > +				ranges;
> > +				bus-range = <0x01 0xff>;
> > +			};
> 
> Are you going to use this? If not, please drop
> 

Absolutely not! This describes the IP that is present in the SoC and that IP is
being used. You can however keep it disabled in the soc.dtsi and enable in board
dts when PCIe controller is enabled.

Moreover, I plan to move the slot supplies to this node soon, so it will be
used mostly.

- Mani

-- 
மணிவண்ணன் சதாசிவம்

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 4/5] arm64: dts: qcom: qcs8300: enable pcie0 for QCS8300

[Ziyue Zhang]

On 11/14/2024 9:02 PM, Konrad Dybcio wrote:
> On 14.11.2024 10:54 AM, Ziyue Zhang wrote:
>> Add configurations in devicetree for PCIe0, including registers, clocks,
>> interrupts and phy setting sequence.
>>
>> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/qcs8300-ride.dts |  44 +++++-
>>   arch/arm64/boot/dts/qcom/qcs8300.dtsi     | 176 ++++++++++++++++++++++
> This implies this patch should be two separate ones
>
>
> [...]
>
>
>> +&tlmm {
>> +	pcie0_default_state: pcie0-default-state {
>> +		perst-pins {
>> +			pins = "gpio2";
>> +			function = "gpio";
>> +			drive-strength = <2>;
>> +			bias-pull-down;
>> +		};
>> +
>> +		clkreq-pins {
>> +			pins = "gpio1";
>> +			function = "pcie0_clkreq";
>> +			drive-strength = <2>;
>> +			bias-pull-up;
>> +		};
>> +
>> +		wake-pins {
>> +			pins = "gpio0";
> Sorting these in an increasing order would be welcome
>
>
>>   
>> +		pcie0: pci@1c00000 {
>> +			compatible = "qcom,pcie-qcs8300","qcom,pcie-sa8775p";
> Missing ' ' after ','
>
>> +			reg = <0x0 0x01c00000 0x0 0x3000>,
>> +			      <0x0 0x40000000 0x0 0xf20>,
>> +			      <0x0 0x40000f20 0x0 0xa8>,
>> +			      <0x0 0x40001000 0x0 0x4000>,
>> +			      <0x0 0x40100000 0x0 0x100000>,
>> +			      <0x0 0x01c03000 0x0 0x1000>;
>> +
>> +			reg-names = "parf",
>> +				    "dbi",
>> +				    "elbi",
>> +				    "atu",
>> +				    "config",
>> +				    "mhi";
>> +
>> +			device_type = "pci";
> Please try to match the style in x1e80100, it's mostly coherent but
> things like newlines differ, which is tiny but mildly annoying
>
>> +
>> +			#address-cells = <3>;
>> +			#size-cells = <2>;
>> +			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
>> +				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
> Looks like there's a bit more space in there
>> +			bus-range = <0x00 0xff>;
>> +
>> +			dma-coherent;
>> +
>> +			linux,pci-domain = <0>;
>> +			num-lanes = <2>;
>> +
>> +			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
>> +
>> +			interrupt-names = "msi0",
>> +					  "msi1",
>> +					  "msi2",
>> +					  "msi3",
>> +					  "msi4",
>> +					  "msi5",
>> +					  "msi6",
>> +					  "msi7";
> Please also add a "global" interrupt.. looks like it's GIC_SPI 166, but
> please confirm
> okay
>> +
>> +			#interrupt-cells = <1>;
>> +			interrupt-map-mask = <0 0 0 0x7>;
>> +			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
>> +					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
>> +					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
>> +					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
>> +
>> +			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
>> +				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
>> +				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
>> +				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
>> +				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
>> +
>> +			clock-names = "aux",
>> +				      "cfg",
>> +				      "bus_master",
>> +				      "bus_slave",
>> +				      "slave_q2a";
>> +
>> +			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
>> +			assigned-clock-rates = <19200000>;
>> +
>> +			interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
> QCOM_ICC_TAG_ALWAYS
> okay
>> +					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
> QCOM_ICC_TAG_ACTIVE_ONLY
>
> [...]
> okay
>> +
>> +			pcieport0: pcie@0 {
>> +				device_type = "pci";
>> +				reg = <0x0 0x0 0x0 0x0 0x0>;
>> +				#address-cells = <3>;
>> +				#size-cells = <2>;
>> +				ranges;
>> +				bus-range = <0x01 0xff>;
>> +			};
> Are you going to use this? If not, please drop

its required by wlan driver we need it

BRs

Ziyue

>
>> +		};
>> +
>> +		pcie0_phy: phy@1c04000 {
>> +			compatible = "qcom,qcs8300-qmp-gen4x2-pcie-phy";
>> +			reg = <0x0 0x1c04000 0x0 0x2000>;
>> +
>> +			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
> This clock goes to the RC, it should be _PHY_AUX (which you put below
> as phy_aux), please replace it.
> will do it
>> +				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
>> +				 <&gcc GCC_PCIE_CLKREF_EN>,
>> +				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
>> +				 <&gcc GCC_PCIE_0_PIPE_CLK>,
>> +				 <&gcc GCC_PCIE_0_PIPEDIV2_CLK>,
>> +				 <&gcc GCC_PCIE_0_PHY_AUX_CLK>;
>> +
>> +			clock-names = "aux",
>> +				      "cfg_ahb",
>> +				      "ref",
>> +				      "rchng",
>> +				      "pipe",
>> +				      "pipediv2",
>> +				      "phy_aux";
> Konrad

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 5/5] arm64: dts: qcom: qcs8300: enable pcie1 for QCS8300

[Ziyue Zhang]

Add configurations in devicetree for PCIe1, including registers, clocks,
interrupts and phy setting sequence.

Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts |  42 ++++-
 arch/arm64/boot/dts/qcom/qcs8300.dtsi     | 179 ++++++++++++++++++++++
 2 files changed, 220 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index 9d7c8555ed38..daec2c52ef38 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -214,7 +214,7 @@ &gcc {
 	clocks = <&rpmhcc RPMH_CXO_CLK>,
 		 <&sleep_clk>,
 		 <&pcie0_phy>,
-		 <0>,
+		 <&pcie1_phy>,
 		 <0>,
 		 <0>,
 		 <0>,
@@ -240,6 +240,23 @@ &pcie0_phy {
 	status = "okay";
 };
 
+&pcie1 {
+	perst-gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l6a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -287,6 +304,29 @@ wake-pins {
 			bias-pull-up;
 		};
 	};
+
+	pcie1_default_state: pcie1-default-state {
+		perst-pins {
+			pins = "gpio23";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio22";
+			function = "pcie1_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio21";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
 };
 
 &uart7 {
diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
index d4924f48b347..bf1ef158d91b 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -813,6 +813,185 @@ pcie0_phy: phy@1c04000 {
 			status = "disabled";
 		};
 
+		pcie1: pci@1c10000 {
+			compatible = "qcom,pcie-qcs8300","qcom,pcie-sa8775p";
+			reg = <0x0 0x01c10000 0x0 0x3000>,
+			      <0x0 0x60000000 0x0 0xf20>,
+			      <0x0 0x60000f20 0x0 0xa8>,
+			      <0x0 0x60001000 0x0 0x4000>,
+			      <0x0 0x60100000 0x0 0x100000>,
+			      <0x0 0x01c13000 0x0 0x1000>;
+
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x1fd00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <1>;
+			num-lanes = <4>;
+
+			interrupts = <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>;
+
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			iommu-map = <0x0 &pcie_smmu 0x0080 0x1>,
+				    <0x100 &pcie_smmu 0x0081 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+			power-domains = <&gcc GCC_PCIE_1_GDSC>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+
+			pcie3_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 1 x4 and GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 2 x4 */
+				opp-20000000 {
+					opp-hz = /bits/ 64 <20000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <2000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 and GEN 4 x1 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+				/* GEN 3 x4 and GEN 4 x2 */
+				opp-32000000 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3938000 1>;
+				};
+
+				/* GEN 4 x4 */
+				opp-64000000 {
+					opp-hz = /bits/ 64 <64000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <7876000 1>;
+				};
+			};
+		};
+
+		pcie1_phy: phy@1c14000 {
+			compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy";
+			reg = <0x0 0x1c14000 0x0 0x4000>;
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_CLKREF_EN>,
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_PIPEDIV2_CLK>,
+				 <&gcc GCC_PCIE_1_PHY_AUX_CLK>;
+
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe",
+				      "pipediv2",
+				      "phy_aux";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		ufs_mem_hc: ufs@1d84000 {
 			compatible = "qcom,qcs8300-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>;
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 5/5] arm64: dts: qcom: qcs8300: enable pcie1 for QCS8300

[Konrad Dybcio]

On 14.11.2024 10:54 AM, Ziyue Zhang wrote:
> Add configurations in devicetree for PCIe1, including registers, clocks,
> interrupts and phy setting sequence.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
> ---

Pretty much identical comments as for patch 4

Konrad

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy