[PATCH rdma-next 0/9] bnxt_re enhancements

[PATCH rdma-next 0/9] bnxt_re enhancements

[Kalesh AP]

Hi,

This patchset contains few enhancements in the bnxt_re driver.

Please review.

Abhishek Mohapatra (1):
  RDMA/bnxt_re: Report udp source port for flow_label in
    bnxt_re_query_qp

Anantha Prabhu (1):
  RDMA/bnxt_re: Update sysfs entries with appropriate data

Chenna Arnoori (1):
  RDMA/bnxt_re: RoCE Driver Dynamic Debug for HWRM's

Damodharam Ammepalli (1):
  RDMA/bnxt_re: Optimize bnxt_qplib_get_dev_attr function

Kalesh AP (2):
  RDMA/bnxt_re: Delete always true SGID table check
  RDMA/bnxt_re: Enhance a log message when bnxt_re_register_netdev fails

Kashyap Desai (1):
  RDMA/bnxt_re: show srq_limit in fill_res_srq_entry hook

Shravya KN (1):
  RDMA/bnxt_re: Avoid GID level QoS update from the driver

Vasuthevan Maheswaran (1):
  RDMA/bnxt_re: RoCE related hardware counters update

 drivers/infiniband/hw/bnxt_re/bnxt_re.h     |   2 +
 drivers/infiniband/hw/bnxt_re/hw_counters.c |  51 ++++---
 drivers/infiniband/hw/bnxt_re/hw_counters.h |   3 +
 drivers/infiniband/hw/bnxt_re/ib_verbs.c    |   4 +-
 drivers/infiniband/hw/bnxt_re/main.c        | 151 +++++++-------------
 drivers/infiniband/hw/bnxt_re/qplib_fp.c    |   1 +
 drivers/infiniband/hw/bnxt_re/qplib_fp.h    |   1 +
 drivers/infiniband/hw/bnxt_re/qplib_rcfw.c  |   2 +
 drivers/infiniband/hw/bnxt_re/qplib_sp.c    |  55 +------
 drivers/infiniband/hw/bnxt_re/qplib_sp.h    |   1 +
 drivers/infiniband/hw/bnxt_re/roce_hsi.h    |   3 +-
 11 files changed, 108 insertions(+), 166 deletions(-)

-- 
2.43.5

[PATCH rdma-next 1/9] RDMA/bnxt_re: Update sysfs entries with appropriate data

[Kalesh AP]

From: Anantha Prabhu <anantha.prabhu@broadcom.com>

Updated the existing sysfs entries with correct data.
This change is to align the behavior with our OOB driver.
Added "board_id" sysfs entry which will provide the
VPD Part number, if exists.

Signed-off-by: Anantha Prabhu <anantha.prabhu@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
---
 drivers/infiniband/hw/bnxt_re/bnxt_re.h |  2 +
 drivers/infiniband/hw/bnxt_re/main.c    | 49 ++++++++++++++++++++++++-
 2 files changed, 49 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/bnxt_re/bnxt_re.h b/drivers/infiniband/hw/bnxt_re/bnxt_re.h
index 6df5a2738c95..b5d0e38c7396 100644
--- a/drivers/infiniband/hw/bnxt_re/bnxt_re.h
+++ b/drivers/infiniband/hw/bnxt_re/bnxt_re.h
@@ -227,6 +227,8 @@ struct bnxt_re_dev {
 	struct workqueue_struct		*dcb_wq;
 	struct dentry                   *cc_config;
 	struct bnxt_re_dbg_cc_config_params *cc_config_params;
+#define BNXT_VPD_FLD_LEN	32
+	char			board_partno[BNXT_VPD_FLD_LEN];
 };
 
 #define to_bnxt_re_dev(ptr, member)	\
diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index 293b0a96c8e3..20c6a961cb18 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -975,7 +975,7 @@ static ssize_t hw_rev_show(struct device *device, struct device_attribute *attr,
 	struct bnxt_re_dev *rdev =
 		rdma_device_to_drv_device(device, struct bnxt_re_dev, ibdev);
 
-	return sysfs_emit(buf, "0x%x\n", rdev->en_dev->pdev->vendor);
+	return sysfs_emit(buf, "0x%x\n", rdev->en_dev->pdev->revision);
 }
 static DEVICE_ATTR_RO(hw_rev);
 
@@ -985,13 +985,31 @@ static ssize_t hca_type_show(struct device *device,
 	struct bnxt_re_dev *rdev =
 		rdma_device_to_drv_device(device, struct bnxt_re_dev, ibdev);
 
-	return sysfs_emit(buf, "%s\n", rdev->ibdev.node_desc);
+	return sysfs_emit(buf, "0x%x\n", rdev->en_dev->pdev->device);
 }
 static DEVICE_ATTR_RO(hca_type);
 
+static ssize_t board_id_show(struct device *device, struct device_attribute *attr,
+			     char *buf)
+{
+	struct bnxt_re_dev *rdev = rdma_device_to_drv_device(device,
+							     struct bnxt_re_dev, ibdev);
+	char buffer[BNXT_VPD_FLD_LEN] = {};
+
+	if (!rdev->is_virtfn)
+		memcpy(buffer, rdev->board_partno, BNXT_VPD_FLD_LEN - 1);
+	else
+		scnprintf(buffer, BNXT_VPD_FLD_LEN, "0x%x-VF",
+			  rdev->en_dev->pdev->device);
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", buffer);
+}
+static DEVICE_ATTR_RO(board_id);
+
 static struct attribute *bnxt_re_attributes[] = {
 	&dev_attr_hw_rev.attr,
 	&dev_attr_hca_type.attr,
+	&dev_attr_board_id.attr,
 	NULL
 };
 
@@ -1945,6 +1963,30 @@ static void bnxt_re_net_register_async_event(struct bnxt_re_dev *rdev)
 				   ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE);
 }
 
+static void bnxt_re_read_vpd_info(struct bnxt_re_dev *rdev)
+{
+	struct pci_dev *pdev = rdev->en_dev->pdev;
+	unsigned int vpd_size, kw_len;
+	int pos, size;
+	u8 *vpd_data;
+
+	vpd_data = pci_vpd_alloc(pdev, &vpd_size);
+	if (IS_ERR(vpd_data)) {
+		pci_warn(pdev, "Unable to read VPD, err=%ld\n", PTR_ERR(vpd_data));
+		return;
+	}
+
+	pos = pci_vpd_find_ro_info_keyword(vpd_data, vpd_size,
+					   PCI_VPD_RO_KEYWORD_PARTNO, &kw_len);
+	if (pos < 0)
+		goto free;
+
+	size = min_t(int, kw_len, BNXT_VPD_FLD_LEN - 1);
+	memcpy(rdev->board_partno, &vpd_data[pos], size);
+free:
+	kfree(vpd_data);
+}
+
 static void bnxt_re_query_hwrm_intf_version(struct bnxt_re_dev *rdev)
 {
 	struct bnxt_en_dev *en_dev = rdev->en_dev;
@@ -2247,6 +2289,9 @@ static int bnxt_re_dev_init(struct bnxt_re_dev *rdev, u8 op_type)
 	bnxt_re_init_dcb_wq(rdev);
 	bnxt_re_net_register_async_event(rdev);
 
+	if (!rdev->is_virtfn)
+		bnxt_re_read_vpd_info(rdev);
+
 	return 0;
 free_sctx:
 	bnxt_re_net_stats_ctx_free(rdev, rdev->qplib_ctx.stats.fw_id);
-- 
2.43.5

Re: [PATCH rdma-next 1/9] RDMA/bnxt_re: Update sysfs entries with appropriate data

[Leon Romanovsky]

On Thu, Aug 14, 2025 at 04:55:47PM +0530, Kalesh AP wrote:
> From: Anantha Prabhu <anantha.prabhu@broadcom.com>
> 
> Updated the existing sysfs entries with correct data.
> This change is to align the behavior with our OOB driver.
> Added "board_id" sysfs entry which will provide the
> VPD Part number, if exists.
> 
> Signed-off-by: Anantha Prabhu <anantha.prabhu@broadcom.com>
> Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
> ---
>  drivers/infiniband/hw/bnxt_re/bnxt_re.h |  2 +
>  drivers/infiniband/hw/bnxt_re/main.c    | 49 ++++++++++++++++++++++++-
>  2 files changed, 49 insertions(+), 2 deletions(-)

<...>

> +static ssize_t board_id_show(struct device *device, struct device_attribute *attr,
> +			     char *buf)
> +{
> +	struct bnxt_re_dev *rdev = rdma_device_to_drv_device(device,
> +							     struct bnxt_re_dev, ibdev);
> +	char buffer[BNXT_VPD_FLD_LEN] = {};
> +
> +	if (!rdev->is_virtfn)
> +		memcpy(buffer, rdev->board_partno, BNXT_VPD_FLD_LEN - 1);
> +	else
> +		scnprintf(buffer, BNXT_VPD_FLD_LEN, "0x%x-VF",
> +			  rdev->en_dev->pdev->device);
> +
> +	return scnprintf(buf, PAGE_SIZE, "%s\n", buffer);

You should use sysfs_emit() here.

> +}
> +static DEVICE_ATTR_RO(board_id);

Thanks

[PATCH rdma-next 2/9] RDMA/bnxt_re: show srq_limit in fill_res_srq_entry hook

[Kalesh AP]

From: Kashyap Desai <kashyap.desai@broadcom.com>

Added srq_limit in rdma show resource srq hook.

Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
---
 drivers/infiniband/hw/bnxt_re/main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index 20c6a961cb18..f08948a49976 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -1225,6 +1225,8 @@ static int bnxt_re_fill_res_srq_entry(struct sk_buff *msg, struct ib_srq *ib_srq
 		goto err;
 	if (rdma_nl_put_driver_u32_hex(msg, "max_sge", srq->qplib_srq.max_sge))
 		goto err;
+	if (rdma_nl_put_driver_u32_hex(msg, "srq_limit", srq->qplib_srq.threshold))
+		goto err;
 
 	nla_nest_end(msg, table_attr);
 	return 0;
-- 
2.43.5

[PATCH rdma-next 3/9] RDMA/bnxt_re: RoCE Driver Dynamic Debug for HWRM's

[Kalesh AP]

From: Chenna Arnoori <chenna.arnoori@broadcom.com>

Add Linux kernel dynamic debug prints to ROCE HWRM's.
Dumping request and response buffers for the ROCE HWRM's using
print_hex_dump_bytes() to be part of kernel dynmic debug.

Signed-off-by: Chenna Arnoori <chenna.arnoori@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
---
 drivers/infiniband/hw/bnxt_re/qplib_rcfw.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
index 804bc773b4ef..b97e75404139 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
@@ -366,6 +366,7 @@ static int __send_message(struct bnxt_qplib_rcfw *rcfw,
 	wmb();
 	writel(cmdq_prod, cmdq->cmdq_mbox.prod);
 	writel(RCFW_CMDQ_TRIG_VAL, cmdq->cmdq_mbox.db);
+	print_hex_dump_bytes("req: ", DUMP_PREFIX_OFFSET, msg->req, msg->req_sz);
 	spin_unlock_bh(&hwq->lock);
 	/* Return the CREQ response pointer */
 	return 0;
@@ -631,6 +632,7 @@ static int bnxt_qplib_process_qp_event(struct bnxt_qplib_rcfw *rcfw,
 	int rc = 0;
 
 	pdev = rcfw->pdev;
+	print_hex_dump_bytes("event: ", DUMP_PREFIX_OFFSET, qp_event, sizeof(*qp_event));
 	switch (qp_event->event) {
 	case CREQ_QP_EVENT_EVENT_QP_ERROR_NOTIFICATION:
 		err_event = (struct creq_qp_error_notification *)qp_event;
-- 
2.43.5

[PATCH rdma-next 4/9] RDMA/bnxt_re: Avoid GID level QoS update from the driver

[Kalesh AP]

From: Shravya KN <shravya.k-n@broadcom.com>

The driver inserts a VLAN header into RoCE packets when the
traffic was untagged by modifying the existing GID entries.
This has caused the firmware to enforce only VLAN-based
priority mappings, ignoring other valid priority configurations
set via APP TLVs (e.g., DSCP selectors).

Driver now has support for selecting the service level (vlan id)
and traffic class (dscp) during modify_qp. So no need to override
the priority update using the update gid method. Hence removing
the code that handles the above operation.

Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
---
 drivers/infiniband/hw/bnxt_re/main.c     | 94 ------------------------
 drivers/infiniband/hw/bnxt_re/qplib_sp.c | 40 ----------
 2 files changed, 134 deletions(-)

diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index f08948a49976..a66da4892ad4 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -1870,81 +1870,6 @@ static void bnxt_re_dev_stop(struct bnxt_re_dev *rdev)
 	mutex_unlock(&rdev->qp_lock);
 }
 
-static int bnxt_re_update_gid(struct bnxt_re_dev *rdev)
-{
-	struct bnxt_qplib_sgid_tbl *sgid_tbl = &rdev->qplib_res.sgid_tbl;
-	struct bnxt_qplib_gid gid;
-	u16 gid_idx, index;
-	int rc = 0;
-
-	if (!ib_device_try_get(&rdev->ibdev))
-		return 0;
-
-	for (index = 0; index < sgid_tbl->active; index++) {
-		gid_idx = sgid_tbl->hw_id[index];
-
-		if (!memcmp(&sgid_tbl->tbl[index], &bnxt_qplib_gid_zero,
-			    sizeof(bnxt_qplib_gid_zero)))
-			continue;
-		/* need to modify the VLAN enable setting of non VLAN GID only
-		 * as setting is done for VLAN GID while adding GID
-		 */
-		if (sgid_tbl->vlan[index])
-			continue;
-
-		memcpy(&gid, &sgid_tbl->tbl[index], sizeof(gid));
-
-		rc = bnxt_qplib_update_sgid(sgid_tbl, &gid, gid_idx,
-					    rdev->qplib_res.netdev->dev_addr);
-	}
-
-	ib_device_put(&rdev->ibdev);
-	return rc;
-}
-
-static u32 bnxt_re_get_priority_mask(struct bnxt_re_dev *rdev)
-{
-	u32 prio_map = 0, tmp_map = 0;
-	struct net_device *netdev;
-	struct dcb_app app = {};
-
-	netdev = rdev->netdev;
-
-	app.selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE;
-	app.protocol = ETH_P_IBOE;
-	tmp_map = dcb_ieee_getapp_mask(netdev, &app);
-	prio_map = tmp_map;
-
-	app.selector = IEEE_8021QAZ_APP_SEL_DGRAM;
-	app.protocol = ROCE_V2_UDP_DPORT;
-	tmp_map = dcb_ieee_getapp_mask(netdev, &app);
-	prio_map |= tmp_map;
-
-	return prio_map;
-}
-
-static int bnxt_re_setup_qos(struct bnxt_re_dev *rdev)
-{
-	u8 prio_map = 0;
-
-	/* Get priority for roce */
-	prio_map = bnxt_re_get_priority_mask(rdev);
-
-	if (prio_map == rdev->cur_prio_map)
-		return 0;
-	rdev->cur_prio_map = prio_map;
-	/* Actual priorities are not programmed as they are already
-	 * done by L2 driver; just enable or disable priority vlan tagging
-	 */
-	if ((prio_map == 0 && rdev->qplib_res.prio) ||
-	    (prio_map != 0 && !rdev->qplib_res.prio)) {
-		rdev->qplib_res.prio = prio_map;
-		bnxt_re_update_gid(rdev);
-	}
-
-	return 0;
-}
-
 static void bnxt_re_net_unregister_async_event(struct bnxt_re_dev *rdev)
 {
 	if (rdev->is_virtfn)
@@ -2106,16 +2031,6 @@ static void bnxt_re_dev_uninit(struct bnxt_re_dev *rdev, u8 op_type)
 	}
 }
 
-/* worker thread for polling periodic events. Now used for QoS programming*/
-static void bnxt_re_worker(struct work_struct *work)
-{
-	struct bnxt_re_dev *rdev = container_of(work, struct bnxt_re_dev,
-						worker.work);
-
-	bnxt_re_setup_qos(rdev);
-	schedule_delayed_work(&rdev->worker, msecs_to_jiffies(30000));
-}
-
 static int bnxt_re_dev_init(struct bnxt_re_dev *rdev, u8 op_type)
 {
 	struct bnxt_re_ring_attr rattr = {};
@@ -2270,15 +2185,6 @@ static int bnxt_re_dev_init(struct bnxt_re_dev *rdev, u8 op_type)
 		if (rc)
 			ibdev_warn(&rdev->ibdev, "Failed to query CC defaults\n");
 
-		rc = bnxt_re_setup_qos(rdev);
-		if (rc)
-			ibdev_info(&rdev->ibdev,
-				   "RoCE priority not yet configured\n");
-
-		INIT_DELAYED_WORK(&rdev->worker, bnxt_re_worker);
-		set_bit(BNXT_RE_FLAG_QOS_WORK_REG, &rdev->flags);
-		schedule_delayed_work(&rdev->worker, msecs_to_jiffies(30000));
-
 		if (!(rdev->qplib_res.en_dev->flags & BNXT_EN_FLAG_ROCE_VF_RES_MGMT))
 			bnxt_re_vf_res_config(rdev);
 	}
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_sp.c b/drivers/infiniband/hw/bnxt_re/qplib_sp.c
index 68981399598d..ce6ec3412c11 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_sp.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_sp.c
@@ -397,46 +397,6 @@ int bnxt_qplib_add_sgid(struct bnxt_qplib_sgid_tbl *sgid_tbl,
 	return 0;
 }
 
-int bnxt_qplib_update_sgid(struct bnxt_qplib_sgid_tbl *sgid_tbl,
-			   struct bnxt_qplib_gid *gid, u16 gid_idx,
-			   const u8 *smac)
-{
-	struct bnxt_qplib_res *res = to_bnxt_qplib(sgid_tbl,
-						   struct bnxt_qplib_res,
-						   sgid_tbl);
-	struct bnxt_qplib_rcfw *rcfw = res->rcfw;
-	struct creq_modify_gid_resp resp = {};
-	struct bnxt_qplib_cmdqmsg msg = {};
-	struct cmdq_modify_gid req = {};
-	int rc;
-
-	bnxt_qplib_rcfw_cmd_prep((struct cmdq_base *)&req,
-				 CMDQ_BASE_OPCODE_MODIFY_GID,
-				 sizeof(req));
-
-	req.gid[0] = cpu_to_be32(((u32 *)gid->data)[3]);
-	req.gid[1] = cpu_to_be32(((u32 *)gid->data)[2]);
-	req.gid[2] = cpu_to_be32(((u32 *)gid->data)[1]);
-	req.gid[3] = cpu_to_be32(((u32 *)gid->data)[0]);
-	if (res->prio) {
-		req.vlan |= cpu_to_le16
-			(CMDQ_ADD_GID_VLAN_TPID_TPID_8100 |
-			 CMDQ_ADD_GID_VLAN_VLAN_EN);
-	}
-
-	/* MAC in network format */
-	req.src_mac[0] = cpu_to_be16(((u16 *)smac)[0]);
-	req.src_mac[1] = cpu_to_be16(((u16 *)smac)[1]);
-	req.src_mac[2] = cpu_to_be16(((u16 *)smac)[2]);
-
-	req.gid_index = cpu_to_le16(gid_idx);
-
-	bnxt_qplib_fill_cmdqmsg(&msg, &req, &resp, NULL, sizeof(req),
-				sizeof(resp), 0);
-	rc = bnxt_qplib_rcfw_send_message(rcfw, &msg);
-	return rc;
-}
-
 /* AH */
 int bnxt_qplib_create_ah(struct bnxt_qplib_res *res, struct bnxt_qplib_ah *ah,
 			 bool block)
-- 
2.43.5

Re: [PATCH rdma-next 4/9] RDMA/bnxt_re: Avoid GID level QoS update from the driver

[Leon Romanovsky]

On Thu, Aug 14, 2025 at 04:55:50PM +0530, Kalesh AP wrote:
> From: Shravya KN <shravya.k-n@broadcom.com>
> 
> The driver inserts a VLAN header into RoCE packets when the
> traffic was untagged by modifying the existing GID entries.
> This has caused the firmware to enforce only VLAN-based
> priority mappings, ignoring other valid priority configurations
> set via APP TLVs (e.g., DSCP selectors).
> 
> Driver now has support for selecting the service level (vlan id)
> and traffic class (dscp) during modify_qp. So no need to override
> the priority update using the update gid method. Hence removing
> the code that handles the above operation.
> 
> Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
> Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
> Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
> ---
>  drivers/infiniband/hw/bnxt_re/main.c     | 94 ------------------------
>  drivers/infiniband/hw/bnxt_re/qplib_sp.c | 40 ----------
>  2 files changed, 134 deletions(-)

<...>

> -
> -		INIT_DELAYED_WORK(&rdev->worker, bnxt_re_worker);
> -		set_bit(BNXT_RE_FLAG_QOS_WORK_REG, &rdev->flags);

You should delete worker from struct bnxt_re_dev and
BNXT_RE_FLAG_QOS_WORK_REG too.

Thanks

[PATCH rdma-next 5/9] RDMA/bnxt_re: Optimize bnxt_qplib_get_dev_attr function

[Kalesh AP]

From: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>

Optimize bnxt_qplib_get_dev_attr() by separating out query_version which
uses creq notification method to host. Due to serialization of cmdq by
firmware, expected latency in response to heavy multi-threaded rdma
applications might be observed.

This patch separates the version_query logic out of device attribute
query and called only during rdma driver init.

Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
---
 drivers/infiniband/hw/bnxt_re/main.c     |  1 +
 drivers/infiniband/hw/bnxt_re/qplib_sp.c | 15 +++++++--------
 drivers/infiniband/hw/bnxt_re/qplib_sp.h |  1 +
 3 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index a66da4892ad4..1c474b3707ce 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -2135,6 +2135,7 @@ static int bnxt_re_dev_init(struct bnxt_re_dev *rdev, u8 op_type)
 	if (rc)
 		goto disable_rcfw;
 
+	bnxt_qplib_query_version(&rdev->rcfw);
 	bnxt_re_set_resource_limits(rdev);
 
 	rc = bnxt_qplib_alloc_ctx(&rdev->qplib_res, &rdev->qplib_ctx, 0,
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_sp.c b/drivers/infiniband/hw/bnxt_re/qplib_sp.c
index ce6ec3412c11..79edff6bda95 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_sp.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_sp.c
@@ -66,14 +66,15 @@ static bool bnxt_qplib_is_atomic_cap(struct bnxt_qplib_rcfw *rcfw)
 	return (pcie_ctl2 & PCI_EXP_DEVCTL2_ATOMIC_REQ);
 }
 
-static void bnxt_qplib_query_version(struct bnxt_qplib_rcfw *rcfw,
-				     char *fw_ver)
+void bnxt_qplib_query_version(struct bnxt_qplib_rcfw *rcfw)
 {
 	struct creq_query_version_resp resp = {};
 	struct bnxt_qplib_cmdqmsg msg = {};
 	struct cmdq_query_version req = {};
+	struct bnxt_qplib_dev_attr *attr;
 	int rc;
 
+	attr = rcfw->res->dattr;
 	bnxt_qplib_rcfw_cmd_prep((struct cmdq_base *)&req,
 				 CMDQ_BASE_OPCODE_QUERY_VERSION,
 				 sizeof(req));
@@ -82,10 +83,10 @@ static void bnxt_qplib_query_version(struct bnxt_qplib_rcfw *rcfw,
 	rc = bnxt_qplib_rcfw_send_message(rcfw, &msg);
 	if (rc)
 		return;
-	fw_ver[0] = resp.fw_maj;
-	fw_ver[1] = resp.fw_minor;
-	fw_ver[2] = resp.fw_bld;
-	fw_ver[3] = resp.fw_rsvd;
+	attr->fw_ver[0] = resp.fw_maj;
+	attr->fw_ver[1] = resp.fw_minor;
+	attr->fw_ver[2] = resp.fw_bld;
+	attr->fw_ver[3] = resp.fw_rsvd;
 }
 
 int bnxt_qplib_get_dev_attr(struct bnxt_qplib_rcfw *rcfw)
@@ -179,8 +180,6 @@ int bnxt_qplib_get_dev_attr(struct bnxt_qplib_rcfw *rcfw)
 	if (_is_max_srq_ext_supported(attr->dev_cap_flags2))
 		attr->max_srq += le16_to_cpu(sb->max_srq_ext);
 
-	bnxt_qplib_query_version(rcfw, attr->fw_ver);
-
 	for (i = 0; i < MAX_TQM_ALLOC_REQ / 4; i++) {
 		temp = le32_to_cpu(sb->tqm_alloc_reqs[i]);
 		tqm_alloc = (u8 *)&temp;
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_sp.h b/drivers/infiniband/hw/bnxt_re/qplib_sp.h
index 09faf4a1e849..e9834e7fc383 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_sp.h
+++ b/drivers/infiniband/hw/bnxt_re/qplib_sp.h
@@ -358,6 +358,7 @@ int bnxt_qplib_read_context(struct bnxt_qplib_rcfw *rcfw, u8 type, u32 xid,
 			    u32 resp_size, void *resp_va);
 int bnxt_qplib_query_cc_param(struct bnxt_qplib_res *res,
 			      struct bnxt_qplib_cc_param *cc_param);
+void bnxt_qplib_query_version(struct bnxt_qplib_rcfw *rcfw);
 
 #define BNXT_VAR_MAX_WQE       4352
 #define BNXT_VAR_MAX_SLOT_ALIGN 256
-- 
2.43.5

[PATCH rdma-next 6/9] RDMA/bnxt_re: RoCE related hardware counters update

[Kalesh AP]

From: Vasuthevan Maheswaran <vasuthevan.maheswaran@broadcom.com>

Support for new hardware counters added, and existing hardware
counters have been modified according to the design documents
for compatibility with open-source monitoring agents.

Signed-off-by: Vasuthevan Maheswaran <vasuthevan.maheswaran@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
---
 drivers/infiniband/hw/bnxt_re/hw_counters.c | 51 ++++++++++++++-------
 drivers/infiniband/hw/bnxt_re/hw_counters.h |  3 ++
 2 files changed, 37 insertions(+), 17 deletions(-)

diff --git a/drivers/infiniband/hw/bnxt_re/hw_counters.c b/drivers/infiniband/hw/bnxt_re/hw_counters.c
index 44bb082e0a60..32ec67e4d922 100644
--- a/drivers/infiniband/hw/bnxt_re/hw_counters.c
+++ b/drivers/infiniband/hw/bnxt_re/hw_counters.c
@@ -79,22 +79,22 @@ static const struct rdma_stat_desc bnxt_re_stat_descs[] = {
 	[BNXT_RE_TX_DISCARDS].name              =  "tx_roce_discards",
 	[BNXT_RE_RX_ERRORS].name		=  "rx_roce_errors",
 	[BNXT_RE_RX_DISCARDS].name		=  "rx_roce_discards",
-	[BNXT_RE_TO_RETRANSMITS].name        = "to_retransmits",
-	[BNXT_RE_SEQ_ERR_NAKS_RCVD].name     = "seq_err_naks_rcvd",
-	[BNXT_RE_MAX_RETRY_EXCEEDED].name    = "max_retry_exceeded",
-	[BNXT_RE_RNR_NAKS_RCVD].name         = "rnr_naks_rcvd",
-	[BNXT_RE_MISSING_RESP].name          = "missing_resp",
+	[BNXT_RE_TO_RETRANSMITS].name           =  "local_ack_timeout_err",
+	[BNXT_RE_SEQ_ERR_NAKS_RCVD].name        =  "packet_seq_err",
+	[BNXT_RE_MAX_RETRY_EXCEEDED].name	=  "max_retry_exceeded",
+	[BNXT_RE_RNR_NAKS_RCVD].name            =  "rnr_nak_retry_err",
+	[BNXT_RE_MISSING_RESP].name             =  "implied_nak_seq_err",
 	[BNXT_RE_UNRECOVERABLE_ERR].name     = "unrecoverable_err",
 	[BNXT_RE_BAD_RESP_ERR].name          = "bad_resp_err",
 	[BNXT_RE_LOCAL_QP_OP_ERR].name       = "local_qp_op_err",
 	[BNXT_RE_LOCAL_PROTECTION_ERR].name  = "local_protection_err",
 	[BNXT_RE_MEM_MGMT_OP_ERR].name       = "mem_mgmt_op_err",
-	[BNXT_RE_REMOTE_INVALID_REQ_ERR].name = "remote_invalid_req_err",
-	[BNXT_RE_REMOTE_ACCESS_ERR].name     = "remote_access_err",
+	[BNXT_RE_REMOTE_INVALID_REQ_ERR].name   = "req_remote_invalid_request",
+	[BNXT_RE_REMOTE_ACCESS_ERR].name        = "req_remote_access_errors",
 	[BNXT_RE_REMOTE_OP_ERR].name         = "remote_op_err",
-	[BNXT_RE_DUP_REQ].name               = "dup_req",
+	[BNXT_RE_DUP_REQ].name               = "duplicate_request",
 	[BNXT_RE_RES_EXCEED_MAX].name        = "res_exceed_max",
-	[BNXT_RE_RES_LENGTH_MISMATCH].name   = "res_length_mismatch",
+	[BNXT_RE_RES_LENGTH_MISMATCH].name   = "resp_local_length_error",
 	[BNXT_RE_RES_EXCEEDS_WQE].name       = "res_exceeds_wqe",
 	[BNXT_RE_RES_OPCODE_ERR].name        = "res_opcode_err",
 	[BNXT_RE_RES_RX_INVALID_RKEY].name   = "res_rx_invalid_rkey",
@@ -118,7 +118,7 @@ static const struct rdma_stat_desc bnxt_re_stat_descs[] = {
 	[BNXT_RE_RES_SRQ_LOAD_ERR].name      = "res_srq_load_err",
 	[BNXT_RE_RES_TX_PCI_ERR].name        = "res_tx_pci_err",
 	[BNXT_RE_RES_RX_PCI_ERR].name        = "res_rx_pci_err",
-	[BNXT_RE_OUT_OF_SEQ_ERR].name        = "oos_drop_count",
+	[BNXT_RE_OUT_OF_SEQ_ERR].name        = "out_of_sequence",
 	[BNXT_RE_TX_ATOMIC_REQ].name	     = "tx_atomic_req",
 	[BNXT_RE_TX_READ_REQ].name	     = "tx_read_req",
 	[BNXT_RE_TX_READ_RES].name	     = "tx_read_resp",
@@ -126,23 +126,26 @@ static const struct rdma_stat_desc bnxt_re_stat_descs[] = {
 	[BNXT_RE_TX_SEND_REQ].name	     = "tx_send_req",
 	[BNXT_RE_TX_ROCE_PKTS].name          = "tx_roce_only_pkts",
 	[BNXT_RE_TX_ROCE_BYTES].name         = "tx_roce_only_bytes",
-	[BNXT_RE_RX_ATOMIC_REQ].name	     = "rx_atomic_req",
-	[BNXT_RE_RX_READ_REQ].name	     = "rx_read_req",
+	[BNXT_RE_RX_ATOMIC_REQ].name	     = "rx_atomic_requests",
+	[BNXT_RE_RX_READ_REQ].name	     = "rx_read_requests",
 	[BNXT_RE_RX_READ_RESP].name	     = "rx_read_resp",
-	[BNXT_RE_RX_WRITE_REQ].name	     = "rx_write_req",
+	[BNXT_RE_RX_WRITE_REQ].name	     = "rx_write_requests",
 	[BNXT_RE_RX_SEND_REQ].name	     = "rx_send_req",
 	[BNXT_RE_RX_ROCE_PKTS].name          = "rx_roce_only_pkts",
 	[BNXT_RE_RX_ROCE_BYTES].name         = "rx_roce_only_bytes",
 	[BNXT_RE_RX_ROCE_GOOD_PKTS].name     = "rx_roce_good_pkts",
 	[BNXT_RE_RX_ROCE_GOOD_BYTES].name    = "rx_roce_good_bytes",
-	[BNXT_RE_OOB].name		     = "rx_out_of_buffer",
-	[BNXT_RE_TX_CNP].name                = "tx_cnp_pkts",
-	[BNXT_RE_RX_CNP].name                = "rx_cnp_pkts",
-	[BNXT_RE_RX_ECN].name                = "rx_ecn_marked_pkts",
+	[BNXT_RE_OOB].name		     = "out_of_buffer",
+	[BNXT_RE_TX_CNP].name                = "np_cnp_pkts",
+	[BNXT_RE_RX_CNP].name                = "rp_cnp_handled",
+	[BNXT_RE_RX_ECN].name                = "np_ecn_marked_roce_packets",
 	[BNXT_RE_PACING_RESCHED].name        = "pacing_reschedule",
 	[BNXT_RE_PACING_CMPL].name           = "pacing_complete",
 	[BNXT_RE_PACING_ALERT].name          = "pacing_alerts",
 	[BNXT_RE_DB_FIFO_REG].name           = "db_fifo_register",
+	[BNXT_RE_REQ_CQE_ERROR].name            = "req_cqe_error",
+	[BNXT_RE_RESP_CQE_ERROR].name           = "resp_cqe_error",
+	[BNXT_RE_RESP_REMOTE_ACCESS_ERRS].name  = "resp_remote_access_errors",
 };
 
 static void bnxt_re_copy_ext_stats(struct bnxt_re_dev *rdev,
@@ -273,6 +276,20 @@ static void bnxt_re_copy_err_stats(struct bnxt_re_dev *rdev,
 			err_s->res_rx_pci_err;
 	stats->value[BNXT_RE_OUT_OF_SEQ_ERR]    =
 			err_s->res_oos_drop_count;
+	stats->value[BNXT_RE_REQ_CQE_ERROR]     =
+			err_s->bad_resp_err +
+			err_s->local_qp_op_err +
+			err_s->local_protection_err +
+			err_s->mem_mgmt_op_err +
+			err_s->remote_invalid_req_err +
+			err_s->remote_access_err +
+			err_s->remote_op_err;
+	stats->value[BNXT_RE_RESP_CQE_ERROR] =
+			err_s->res_cmp_err +
+			err_s->res_cq_load_err;
+	stats->value[BNXT_RE_RESP_REMOTE_ACCESS_ERRS] =
+			err_s->res_rx_no_perm +
+			err_s->res_tx_no_perm;
 }
 
 static void bnxt_re_copy_db_pacing_stats(struct bnxt_re_dev *rdev,
diff --git a/drivers/infiniband/hw/bnxt_re/hw_counters.h b/drivers/infiniband/hw/bnxt_re/hw_counters.h
index e541b6f8ca9f..be8e69458734 100644
--- a/drivers/infiniband/hw/bnxt_re/hw_counters.h
+++ b/drivers/infiniband/hw/bnxt_re/hw_counters.h
@@ -133,6 +133,9 @@ enum bnxt_re_hw_stats {
 	BNXT_RE_PACING_CMPL,
 	BNXT_RE_PACING_ALERT,
 	BNXT_RE_DB_FIFO_REG,
+	BNXT_RE_REQ_CQE_ERROR,
+	BNXT_RE_RESP_CQE_ERROR,
+	BNXT_RE_RESP_REMOTE_ACCESS_ERRS,
 	BNXT_RE_NUM_EXT_COUNTERS
 };
 
-- 
2.43.5

[PATCH rdma-next 7/9] RDMA/bnxt_re: Report udp source port for flow_label in bnxt_re_query_qp

[Kalesh AP]

From: Abhishek Mohapatra <abhishek.mohapatra@broadcom.com>

The firmware doesn't capture the flow_label. Therefore the value
that's always returned by qplib_qp->ah.flow_label is 0 whenever
a qp is created. And as per IB spec, udp source port can be reported
for flow_label. Hence reported udp source port for flow_label in
bnxt_re_query_qp by populating the value of qplib_qp->udp_sport
into qp_attr->ah_attr.grh.flow_label.

Signed-off-by: Abhishek Mohapatra <abhishek.mohapatra@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
---
 drivers/infiniband/hw/bnxt_re/ib_verbs.c | 2 +-
 drivers/infiniband/hw/bnxt_re/qplib_fp.c | 1 +
 drivers/infiniband/hw/bnxt_re/qplib_fp.h | 1 +
 drivers/infiniband/hw/bnxt_re/roce_hsi.h | 3 ++-
 4 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
index 37c2bc3bdba5..98bc8b6290f1 100644
--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
@@ -2305,7 +2305,7 @@ int bnxt_re_query_qp(struct ib_qp *ib_qp, struct ib_qp_attr *qp_attr,
 	qp_attr->pkey_index = qplib_qp->pkey_index;
 	qp_attr->qkey = qplib_qp->qkey;
 	qp_attr->ah_attr.type = RDMA_AH_ATTR_TYPE_ROCE;
-	rdma_ah_set_grh(&qp_attr->ah_attr, NULL, qplib_qp->ah.flow_label,
+	rdma_ah_set_grh(&qp_attr->ah_attr, NULL, qplib_qp->udp_sport,
 			qplib_qp->ah.host_sgid_index,
 			qplib_qp->ah.hop_limit,
 			qplib_qp->ah.traffic_class);
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.c b/drivers/infiniband/hw/bnxt_re/qplib_fp.c
index dfe3177123e5..092310571dcc 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_fp.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.c
@@ -1492,6 +1492,7 @@ int bnxt_qplib_query_qp(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp)
 	qp->access = sb->access;
 	qp->pkey_index = le16_to_cpu(sb->pkey);
 	qp->qkey = le32_to_cpu(sb->qkey);
+	qp->udp_sport = le16_to_cpu(sb->udp_src_port);
 
 	temp32[0] = le32_to_cpu(sb->dgid[0]);
 	temp32[1] = le32_to_cpu(sb->dgid[1]);
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.h b/drivers/infiniband/hw/bnxt_re/qplib_fp.h
index ab125f1d949e..074c539c69c1 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_fp.h
+++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.h
@@ -299,6 +299,7 @@ struct bnxt_qplib_qp {
 	u8				smac[6];
 	u16				vlan_id;
 	u16				port_id;
+	u16				udp_sport;
 	u8				nw_type;
 	struct bnxt_qplib_ah		ah;
 
diff --git a/drivers/infiniband/hw/bnxt_re/roce_hsi.h b/drivers/infiniband/hw/bnxt_re/roce_hsi.h
index 024845f945ff..f9ac37335a1d 100644
--- a/drivers/infiniband/hw/bnxt_re/roce_hsi.h
+++ b/drivers/infiniband/hw/bnxt_re/roce_hsi.h
@@ -788,7 +788,8 @@ struct creq_query_qp_resp_sb {
 	#define CREQ_QUERY_QP_RESP_SB_ACCESS_REMOTE_ATOMIC 0x8UL
 	__le16	pkey;
 	__le32	qkey;
-	__le32	reserved32;
+	__le16	udp_src_port;
+	__le16	reserved16;
 	__le32	dgid[4];
 	__le32	flow_label;
 	__le16	sgid_index;
-- 
2.43.5

[PATCH rdma-next 8/9] RDMA/bnxt_re: Delete always true SGID table check

[Kalesh AP]

The "sgid_tbl" inside "rdev->qplib_res" is a static memory.
Hence, the check always return true.

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
---
 drivers/infiniband/hw/bnxt_re/ib_verbs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
index 98bc8b6290f1..195a9ba6f65d 100644
--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
@@ -375,7 +375,7 @@ int bnxt_re_del_gid(const struct ib_gid_attr *attr, void **context)
 	if (!ctx)
 		return -EINVAL;
 
-	if (sgid_tbl && sgid_tbl->active) {
+	if (sgid_tbl->active) {
 		if (ctx->idx >= sgid_tbl->max)
 			return -EINVAL;
 		gid_to_del = &sgid_tbl->tbl[ctx->idx].gid;
-- 
2.43.5

[PATCH rdma-next 9/9] RDMA/bnxt_re: Enhance a log message when bnxt_re_register_netdev fails

[Kalesh AP]

Make a error log message more user friendly.
When bnxt_re_register_netdev()() fails, the current
log does not convey much information.

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
---
 drivers/infiniband/hw/bnxt_re/main.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index 1c474b3707ce..3ae5f0d08f3a 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -2045,8 +2045,9 @@ static int bnxt_re_dev_init(struct bnxt_re_dev *rdev, u8 op_type)
 		rc = bnxt_re_register_netdev(rdev);
 		if (rc) {
 			ibdev_err(&rdev->ibdev,
-				  "Failed to register with netedev: %#x\n", rc);
-			return -EINVAL;
+				  "Failed to register with Ethernet driver, rc %d\n",
+				  rc);
+			return rc;
 		}
 	}
 	set_bit(BNXT_RE_FLAG_NETDEV_REGISTERED, &rdev->flags);
-- 
2.43.5

Re: [PATCH rdma-next 0/9] bnxt_re enhancements

[Leon Romanovsky]

On Thu, Aug 14, 2025 at 04:55:46PM +0530, Kalesh AP wrote:
> Hi,
> 
> This patchset contains few enhancements in the bnxt_re driver.
> 
> Please review.
> 
> Abhishek Mohapatra (1):
>   RDMA/bnxt_re: Report udp source port for flow_label in
>     bnxt_re_query_qp
> 
> Chenna Arnoori (1):
>   RDMA/bnxt_re: RoCE Driver Dynamic Debug for HWRM's
> 
> Damodharam Ammepalli (1):
>   RDMA/bnxt_re: Optimize bnxt_qplib_get_dev_attr function
> 
> Kalesh AP (2):
>   RDMA/bnxt_re: Delete always true SGID table check
>   RDMA/bnxt_re: Enhance a log message when bnxt_re_register_netdev fails
> 
> Kashyap Desai (1):
>   RDMA/bnxt_re: show srq_limit in fill_res_srq_entry hook
>
> Vasuthevan Maheswaran (1):
>   RDMA/bnxt_re: RoCE related hardware counters update
>

Applied to wip/leon-for-next

> Anantha Prabhu (1):
>   RDMA/bnxt_re: Update sysfs entries with appropriate data
> 
> Shravya KN (1):
>   RDMA/bnxt_re: Avoid GID level QoS update from the driver
> 

These need to be resent.

Thanks

Re: [PATCH rdma-next 0/9] bnxt_re enhancements

[Kalesh Anakkur Purayil]

[-- Attachment #1.1: Type: text/plain, Size: 1314 bytes --]

Hi Leon,

On Mon, Sep 8, 2025 at 12:41 PM Leon Romanovsky <leon@kernel.org> wrote:

> On Thu, Aug 14, 2025 at 04:55:46PM +0530, Kalesh AP wrote:
> > Hi,
> >
> > This patchset contains few enhancements in the bnxt_re driver.
> >
> > Please review.
> >
> > Abhishek Mohapatra (1):
> >   RDMA/bnxt_re: Report udp source port for flow_label in
> >     bnxt_re_query_qp
> >
> > Chenna Arnoori (1):
> >   RDMA/bnxt_re: RoCE Driver Dynamic Debug for HWRM's
> >
> > Damodharam Ammepalli (1):
> >   RDMA/bnxt_re: Optimize bnxt_qplib_get_dev_attr function
> >
> > Kalesh AP (2):
> >   RDMA/bnxt_re: Delete always true SGID table check
> >   RDMA/bnxt_re: Enhance a log message when bnxt_re_register_netdev fails
> >
> > Kashyap Desai (1):
> >   RDMA/bnxt_re: show srq_limit in fill_res_srq_entry hook
> >
> > Vasuthevan Maheswaran (1):
> >   RDMA/bnxt_re: RoCE related hardware counters update
> >
>
> Applied to wip/leon-for-next
>

Thank you.

>
> > Anantha Prabhu (1):
> >   RDMA/bnxt_re: Update sysfs entries with appropriate data
> >
> > Shravya KN (1):
> >   RDMA/bnxt_re: Avoid GID level QoS update from the driver
> >
>
> These need to be resent.
>

Sure, I will resend these 2 patches with the proposed suggestions.

>
> Thanks
>


-- 
Regards,
Kalesh AP

[-- Attachment #1.2: Type: text/html, Size: 2301 bytes --]

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4226 bytes --]