From: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
To: JBottomley-wo1vFcy6AUs@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
john.garry2-s/0ZXS5h9803lw97EnAbAg@public.gmane.org,
hare-l3A5Bk7waGM@public.gmane.org,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org
Subject: [PATCH v4 19/32] scsi: hisi_sas: add v1 HW initialisation code
Date: Mon, 16 Nov 2015 21:06:05 +0800 [thread overview]
Message-ID: <1447679178-220222-20-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1447679178-220222-1-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/hisi_sas.h | 1 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 4 +
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 337 +++++++++++++++++++++++++++++++++
3 files changed, 342 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 72533ca..ba3bf5e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -81,6 +81,7 @@ struct hisi_sas_slot {
};
struct hisi_sas_hw {
+ int (*hw_init)(struct hisi_hba *hisi_hba);
int complete_hdr_size;
};
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 06b863c..6c13547 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -402,6 +402,10 @@ int hisi_sas_probe(struct platform_device *pdev,
hisi_sas_init_add(hisi_hba);
+ rc = hisi_hba->hw->hw_init(hisi_hba);
+ if (rc)
+ goto err_out_ha;
+
rc = scsi_add_host(shost, &pdev->dev);
if (rc)
goto err_out_ha;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 9fe89bb..9bfe1aa 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -405,7 +405,344 @@ enum {
(HISI_SAS_PHY_MAX_INT_NR + HISI_SAS_CQ_MAX_INT_NR +\
HISI_SAS_FATAL_INT_NR)
+static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
+{
+ void __iomem *regs = hisi_hba->regs + off;
+
+ return readl(regs);
+}
+
+static void hisi_sas_write32(struct hisi_hba *hisi_hba,
+ u32 off, u32 val)
+{
+ void __iomem *regs = hisi_hba->regs + off;
+
+ writel(val, regs);
+}
+
+static void hisi_sas_phy_write32(struct hisi_hba *hisi_hba,
+ int phy_no, u32 off, u32 val)
+{
+ void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
+
+ writel(val, regs);
+}
+
+static u32 hisi_sas_phy_read32(struct hisi_hba *hisi_hba,
+ int phy_no, u32 off)
+{
+ void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
+
+ return readl(regs);
+}
+
+static void config_phy_opt_mode_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
+
+ cfg &= ~PHY_CFG_DC_OPT_MSK;
+ cfg |= 1 << PHY_CFG_DC_OPT_OFF;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
+}
+
+static void config_tx_tfe_autoneg_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CONFIG2);
+
+ cfg &= ~PHY_CONFIG2_FORCE_TXDEEMPH_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CONFIG2, cfg);
+}
+
+static void config_id_frame_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ struct sas_identify_frame identify_frame;
+ u32 *identify_buffer;
+
+ memset(&identify_frame, 0, sizeof(identify_frame));
+ identify_frame.dev_type = SAS_END_DEVICE;
+ identify_frame.frame_type = 0;
+ identify_frame._un1 = 1;
+ identify_frame.initiator_bits = SAS_PROTOCOL_ALL;
+ identify_frame.target_bits = SAS_PROTOCOL_NONE;
+ memcpy(&identify_frame._un4_11[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
+ memcpy(&identify_frame.sas_addr[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
+ identify_frame.phy_id = phy_no;
+ identify_buffer = (u32 *)(&identify_frame);
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD0,
+ __swab32(identify_buffer[0]));
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD1,
+ identify_buffer[2]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD2,
+ identify_buffer[1]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD3,
+ identify_buffer[4]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD4,
+ identify_buffer[3]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD5,
+ __swab32(identify_buffer[5]));
+}
+
+static void init_id_frame_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; i++)
+ config_id_frame_v1_hw(hisi_hba, i);
+}
+
+static int reset_hw_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+ unsigned long end_time;
+ u32 val;
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ u32 phy_ctrl = hisi_sas_phy_read32(hisi_hba, i, PHY_CTRL);
+
+ phy_ctrl |= PHY_CTRL_RESET_MSK;
+ hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, phy_ctrl);
+ }
+ msleep(1); /* It is safe to wait for 50us */
+
+ /* Ensure DMA tx & rx idle */
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ u32 dma_tx_status, dma_rx_status;
+
+ end_time = jiffies + msecs_to_jiffies(1000);
+
+ while (1) {
+ dma_tx_status = hisi_sas_phy_read32(hisi_hba, i,
+ DMA_TX_STATUS);
+ dma_rx_status = hisi_sas_phy_read32(hisi_hba, i,
+ DMA_RX_STATUS);
+
+ if (!(dma_tx_status & DMA_TX_STATUS_BUSY_MSK) &&
+ !(dma_rx_status & DMA_RX_STATUS_BUSY_MSK))
+ break;
+
+ msleep(20);
+ if (time_after(jiffies, end_time))
+ return -EIO;
+ }
+ }
+
+ /* Ensure axi bus idle */
+ end_time = jiffies + msecs_to_jiffies(1000);
+ while (1) {
+ u32 axi_status =
+ hisi_sas_read32(hisi_hba, AXI_CFG);
+
+ if (axi_status == 0)
+ break;
+
+ msleep(20);
+ if (time_after(jiffies, end_time))
+ return -EIO;
+ }
+
+ /* Apply reset and disable clock */
+ /* clk disable reg is offset by +4 bytes from clk enable reg */
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg,
+ RESET_VALUE);
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg + 4,
+ RESET_VALUE);
+ msleep(1);
+ regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, &val);
+ if (RESET_VALUE != (val & RESET_VALUE)) {
+ dev_err(dev, "Reset failed\n");
+ return -EIO;
+ }
+
+ /* De-reset and enable clock */
+ /* deassert rst reg is offset by +4 bytes from assert reg */
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg + 4,
+ RESET_VALUE);
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg,
+ RESET_VALUE);
+ msleep(1);
+ regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, &val);
+ if (val & RESET_VALUE) {
+ dev_err(dev, "De-reset failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void init_reg_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+
+ /* Global registers init*/
+ hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE,
+ (u32)((1ULL << hisi_hba->queue_count) - 1));
+ hisi_sas_write32(hisi_hba, HGC_TRANS_TASK_CNT_LIMIT, 0x11);
+ hisi_sas_write32(hisi_hba, DEVICE_MSG_WORK_MODE, 0x1);
+ hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x1ff);
+ hisi_sas_write32(hisi_hba, HGC_ERR_STAT_EN, 0x401);
+ hisi_sas_write32(hisi_hba, CFG_1US_TIMER_TRSH, 0x64);
+ hisi_sas_write32(hisi_hba, HGC_GET_ITV_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, I_T_NEXUS_LOSS_TIME, 0x64);
+ hisi_sas_write32(hisi_hba, BUS_INACTIVE_LIMIT_TIME, 0x2710);
+ hisi_sas_write32(hisi_hba, REJECT_TO_OPEN_LIMIT_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x7a12);
+ hisi_sas_write32(hisi_hba, HGC_DFX_CFG2, 0x9c40);
+ hisi_sas_write32(hisi_hba, FIS_LIST_BADDR_L, 0x2);
+ hisi_sas_write32(hisi_hba, INT_COAL_EN, 0xc);
+ hisi_sas_write32(hisi_hba, OQ_INT_COAL_TIME, 0x186a0);
+ hisi_sas_write32(hisi_hba, OQ_INT_COAL_CNT, 1);
+ hisi_sas_write32(hisi_hba, ENT_INT_COAL_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, ENT_INT_COAL_CNT, 0x1);
+ hisi_sas_write32(hisi_hba, OQ_INT_SRC, 0xffffffff);
+ hisi_sas_write32(hisi_hba, OQ_INT_SRC_MSK, 0);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC1, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC2, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0);
+ hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0);
+ hisi_sas_write32(hisi_hba, AXI_AHB_CLK_CFG, 0x2);
+ hisi_sas_write32(hisi_hba, CFG_SAS_CONFIG, 0x22000000);
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x88a);
+ hisi_sas_phy_write32(hisi_hba, i, PHY_CONFIG2, 0x7c080);
+ hisi_sas_phy_write32(hisi_hba, i, PHY_RATE_NEGO, 0x415ee00);
+ hisi_sas_phy_write32(hisi_hba, i, PHY_PCN, 0x80a80000);
+ hisi_sas_phy_write32(hisi_hba, i, SL_TOUT_CFG, 0x7d7d7d7d);
+ hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0x0);
+ hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000);
+ hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0);
+ hisi_sas_phy_write32(hisi_hba, i, CON_CFG_DRIVER, 0x13f0a);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT_COAL_EN, 3);
+ hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 8);
+ }
+
+ for (i = 0; i < hisi_hba->queue_count; i++) {
+ /* Delivery queue */
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_BASE_ADDR_HI + (i * 0x14),
+ upper_32_bits(hisi_hba->cmd_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_BASE_ADDR_LO + (i * 0x14),
+ lower_32_bits(hisi_hba->cmd_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_DEPTH + (i * 0x14),
+ HISI_SAS_QUEUE_SLOTS);
+
+ /* Completion queue */
+ hisi_sas_write32(hisi_hba,
+ COMPL_Q_0_BASE_ADDR_HI + (i * 0x14),
+ upper_32_bits(hisi_hba->complete_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba,
+ COMPL_Q_0_BASE_ADDR_LO + (i * 0x14),
+ lower_32_bits(hisi_hba->complete_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba, COMPL_Q_0_DEPTH + (i * 0x14),
+ HISI_SAS_QUEUE_SLOTS);
+ }
+
+ /* itct */
+ hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_LO,
+ lower_32_bits(hisi_hba->itct_dma));
+
+ hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_HI,
+ upper_32_bits(hisi_hba->itct_dma));
+
+ /* iost */
+ hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_LO,
+ lower_32_bits(hisi_hba->iost_dma));
+
+ hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_HI,
+ upper_32_bits(hisi_hba->iost_dma));
+
+ /* breakpoint */
+ hisi_sas_write32(hisi_hba, BROKEN_MSG_ADDR_LO,
+ lower_32_bits(hisi_hba->breakpoint_dma));
+
+ hisi_sas_write32(hisi_hba, BROKEN_MSG_ADDR_HI,
+ upper_32_bits(hisi_hba->breakpoint_dma));
+}
+
+static int hw_init_v1_hw(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ int rc;
+
+ rc = reset_hw_v1_hw(hisi_hba);
+ if (rc) {
+ dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc);
+ return rc;
+ }
+
+ msleep(100);
+ init_reg_v1_hw(hisi_hba);
+
+ init_id_frame_v1_hw(hisi_hba);
+
+ return 0;
+}
+
+static void enable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
+
+ cfg |= PHY_CFG_ENA_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
+}
+
+static void start_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ config_id_frame_v1_hw(hisi_hba, phy_no);
+ config_phy_opt_mode_v1_hw(hisi_hba, phy_no);
+ config_tx_tfe_autoneg_v1_hw(hisi_hba, phy_no);
+ enable_phy_v1_hw(hisi_hba, phy_no);
+}
+
+static void start_phys_v1_hw(unsigned long data)
+{
+ struct hisi_hba *hisi_hba = (struct hisi_hba *)data;
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x12a);
+ start_phy_v1_hw(hisi_hba, i);
+ }
+}
+
+static void phys_init_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+ struct timer_list *timer = &hisi_hba->timer;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x6a);
+ hisi_sas_phy_read32(hisi_hba, i, CHL_INT2_MSK);
+ }
+
+ setup_timer(timer, start_phys_v1_hw, (unsigned long)hisi_hba);
+ mod_timer(timer, jiffies + HZ);
+}
+
+static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
+{
+ int rc;
+
+ rc = hw_init_v1_hw(hisi_hba);
+ if (rc)
+ return rc;
+
+ phys_init_v1_hw(hisi_hba);
+
+ return 0;
+}
+
static const struct hisi_sas_hw hisi_sas_v1_hw = {
+ .hw_init = hisi_sas_v1_init,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-11-16 13:06 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-16 13:05 [PATCH v4 00/32] HiSilicon SAS driver John Garry
2015-11-16 13:05 ` [PATCH v4 01/32] [SCSI] sas: centralise ssp frame information units John Garry
2015-11-16 13:05 ` [PATCH v4 03/32] scsi: hisi_sas: add initial bare main driver John Garry
2015-11-16 17:35 ` kbuild test robot
2015-11-17 16:24 ` John Garry
2015-11-16 13:05 ` [PATCH v4 05/32] scsi: hisi_sas: scan device tree John Garry
2015-11-16 21:10 ` kbuild test robot
2015-11-16 13:05 ` [PATCH v4 06/32] scsi: hisi_sas: add HW DMA structures John Garry
2015-11-16 13:05 ` [PATCH v4 07/32] scsi: hisi_sas: allocate memories and create pools John Garry
2015-11-16 13:05 ` [PATCH v4 08/32] scsi: hisi_sas: add hisi_sas_remove John Garry
2015-11-16 13:05 ` [PATCH v4 09/32] scsi: hisi_sas: add slot init code John Garry
2015-11-16 13:05 ` [PATCH v4 10/32] scsi: hisi_sas: add cq structure initialization John Garry
2015-11-16 13:05 ` [PATCH v4 11/32] scsi: hisi_sas: add phy SAS ADDR initialization John Garry
[not found] ` <1447679178-220222-1-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-11-16 13:05 ` [PATCH v4 02/32] devicetree: bindings: scsi: HiSi SAS John Garry
2015-11-16 13:56 ` Rob Herring
2015-11-16 13:05 ` [PATCH v4 04/32] scsi: hisi_sas: add scsi host registration John Garry
2015-11-16 13:05 ` [PATCH v4 12/32] scsi: hisi_sas: set dev DMA mask John Garry
2015-11-16 13:05 ` [PATCH v4 13/32] scsi: hisi_sas: add hisi_hba workqueue John Garry
2015-11-16 13:06 ` [PATCH v4 15/32] scsi: hisi_sas: add phy and port init John Garry
2015-11-16 13:06 ` [PATCH v4 17/32] scsi: hisi_sas: add v1 hw module init John Garry
2015-11-16 13:06 ` John Garry [this message]
2015-11-16 13:06 ` [PATCH v4 21/32] scsi: hisi_sas: add path from phyup irq to SAS framework John Garry
2015-11-16 13:06 ` [PATCH v4 22/32] scsi: hisi_sas: add ssp command function John Garry
2015-11-16 13:06 ` [PATCH v4 25/32] scsi: hisi_sas: add abnormal irq handler John Garry
2015-11-16 13:06 ` [PATCH v4 26/32] scsi: hisi_sas: add bcast interrupt handler John Garry
2015-11-16 13:06 ` [PATCH v4 28/32] scsi: hisi_sas: add scan finished and start John Garry
2015-11-16 13:06 ` [PATCH v4 31/32] scsi: hisi_sas: add fatal irq handler John Garry
2015-11-16 13:06 ` [PATCH v4 14/32] scsi: hisi_sas: add hisi sas device type John Garry
2015-11-16 13:06 ` [PATCH v4 16/32] scsi: hisi_sas: add timer and spinlock init John Garry
2015-11-16 13:06 ` [PATCH v4 18/32] scsi: hisi_sas: add v1 hardware register definitions John Garry
2015-11-16 13:06 ` [PATCH v4 20/32] scsi: hisi_sas: add v1 hw interrupt init John Garry
2015-11-16 13:06 ` [PATCH v4 23/32] scsi: hisi_sas: add cq interrupt handler John Garry
2015-11-16 13:06 ` [PATCH v4 24/32] scsi: hisi_sas: add dev_found and dev_gone John Garry
2015-11-16 13:06 ` [PATCH v4 27/32] scsi: hisi_sas: add smp protocol support John Garry
2015-11-16 13:06 ` [PATCH v4 29/32] scsi: hisi_sas: add tmf methods John Garry
2015-11-16 13:06 ` [PATCH v4 30/32] scsi: hisi_sas: add control phy handler John Garry
2015-11-16 13:06 ` [PATCH v4 32/32] MAINTAINERS: add maintainer for HiSi SAS driver John Garry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447679178-220222-20-git-send-email-john.garry@huawei.com \
--to=john.garry-hv44wf8li93qt0dzr+alfa@public.gmane.org \
--cc=JBottomley-wo1vFcy6AUs@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=hare-l3A5Bk7waGM@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=john.garry2-s/0ZXS5h9803lw97EnAbAg@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox