Linux SCSI subsystem development
 help / color / mirror / Atom feed
From: John Garry <john.garry@huawei.com>
To: JBottomley@odin.com, robh+dt@kernel.org, pawel.moll@arm.com,
	mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
	galak@codeaurora.org, arnd@arndb.de
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, linuxarm@huawei.com,
	john.garry2@mail.dcu.ie, hare@suse.de, xuwei5@hisilicon.com,
	zhangfei.gao@linaro.org, john.garry@huawei.com
Subject: [PATCH v4 05/32] scsi: hisi_sas: scan device tree
Date: Mon, 16 Nov 2015 21:05:51 +0800	[thread overview]
Message-ID: <1447679178-220222-6-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1447679178-220222-1-git-send-email-john.garry@huawei.com>

Scan the device tree for all properties. Also
do this:
- do ioremap for SAS registers
- allocate memory for interrupt names

Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h      | 10 ++++++++
 drivers/scsi/hisi_sas/hisi_sas_main.c | 45 ++++++++++++++++++++++++++++++++++-
 2 files changed, 54 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 6f57fd1..87f4b61 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -28,6 +28,8 @@
 #define HISI_SAS_MAX_DEVICES HISI_SAS_MAX_ITCT_ENTRIES
 #define HISI_SAS_COMMAND_ENTRIES 8192
 
+#define HISI_SAS_NAME_LEN 32
+
 struct hisi_sas_phy {
 	struct asd_sas_phy	sas_phy;
 };
@@ -44,6 +46,11 @@ struct hisi_hba {
 	struct sas_ha_struct *p;
 
 	struct platform_device *pdev;
+	void __iomem *regs;
+	struct regmap *ctrl;
+	u32 ctrl_reset_reg;
+	u32 ctrl_reset_sts_reg;
+	u32 ctrl_clock_ena_reg;
 	u8 sas_addr[SAS_ADDR_SIZE];
 
 	int n_phy;
@@ -53,6 +60,9 @@ struct hisi_hba {
 	struct Scsi_Host *shost;
 	struct hisi_sas_phy phy[HISI_SAS_MAX_PHYS];
 	struct hisi_sas_port port[HISI_SAS_MAX_PHYS];
+
+	int	queue_count;
+	char	*int_names;
 	const struct hisi_sas_hw *hw;	/* Low level hw interface */
 };
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 4fd000e..4fc5a6c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -39,9 +39,13 @@ static struct sas_domain_function_template hisi_sas_transport_ops = {
 static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
 					      const struct hisi_sas_hw *hw)
 {
+	struct resource *res;
 	struct Scsi_Host *shost;
 	struct hisi_hba *hisi_hba;
 	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+	struct property *sas_addr_prop;
+	int num;
 
 	shost = scsi_host_alloc(&hisi_sas_sht, sizeof(*hisi_hba));
 	if (!shost)
@@ -53,6 +57,46 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
 	hisi_hba->shost = shost;
 	SHOST_TO_SAS_HA(shost) = &hisi_hba->sha;
 
+	sas_addr_prop = of_find_property(np, "sas-addr", NULL);
+	if (!sas_addr_prop || (sas_addr_prop->length != SAS_ADDR_SIZE))
+		goto err_out;
+	memcpy(hisi_hba->sas_addr, sas_addr_prop->value, SAS_ADDR_SIZE);
+
+	if (of_property_read_u32(np, "ctrl-reset-reg",
+				 &hisi_hba->ctrl_reset_reg))
+		goto err_out;
+
+	if (of_property_read_u32(np, "ctrl-reset-sts-reg",
+				 &hisi_hba->ctrl_reset_sts_reg))
+		goto err_out;
+
+	if (of_property_read_u32(np, "ctrl-clock-ena-reg",
+				 &hisi_hba->ctrl_clock_ena_reg))
+		goto err_out;
+
+	if (of_property_read_u32(np, "phy-count", &hisi_hba->n_phy))
+		goto err_out;
+
+	if (of_property_read_u32(np, "queue-count", &hisi_hba->queue_count))
+		goto err_out;
+
+	num = of_irq_count(np);
+	hisi_hba->int_names = devm_kcalloc(dev, num,
+					   HISI_SAS_NAME_LEN,
+					   GFP_KERNEL);
+	if (!hisi_hba->int_names)
+		goto err_out;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hisi_hba->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(hisi_hba->regs))
+		goto err_out;
+
+	hisi_hba->ctrl = syscon_regmap_lookup_by_phandle(
+				np, "hisilicon,sas-syscon");
+	if (IS_ERR(hisi_hba->ctrl))
+		goto err_out;
+
 	return shost;
 err_out:
 	dev_err(dev, "shost alloc failed\n");
@@ -79,7 +123,6 @@ int hisi_sas_probe(struct platform_device *pdev,
 	sha = SHOST_TO_SAS_HA(shost);
 	hisi_hba = shost_priv(shost);
 	platform_set_drvdata(pdev, sha);
-	hisi_hba->n_phy = HISI_SAS_MAX_PHYS;
 	phy_nr = port_nr = hisi_hba->n_phy;
 
 	arr_phy = devm_kcalloc(dev, phy_nr, sizeof(void *), GFP_KERNEL);
-- 
1.9.1


  parent reply	other threads:[~2015-11-16 13:21 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-16 13:05 [PATCH v4 00/32] HiSilicon SAS driver John Garry
2015-11-16 13:05 ` [PATCH v4 01/32] [SCSI] sas: centralise ssp frame information units John Garry
     [not found] ` <1447679178-220222-1-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-11-16 13:05   ` [PATCH v4 02/32] devicetree: bindings: scsi: HiSi SAS John Garry
2015-11-16 13:56     ` Rob Herring
2015-11-16 13:05   ` [PATCH v4 04/32] scsi: hisi_sas: add scsi host registration John Garry
2015-11-16 13:05   ` [PATCH v4 12/32] scsi: hisi_sas: set dev DMA mask John Garry
2015-11-16 13:05   ` [PATCH v4 13/32] scsi: hisi_sas: add hisi_hba workqueue John Garry
2015-11-16 13:06   ` [PATCH v4 15/32] scsi: hisi_sas: add phy and port init John Garry
2015-11-16 13:06   ` [PATCH v4 17/32] scsi: hisi_sas: add v1 hw module init John Garry
2015-11-16 13:06   ` [PATCH v4 19/32] scsi: hisi_sas: add v1 HW initialisation code John Garry
2015-11-16 13:06   ` [PATCH v4 21/32] scsi: hisi_sas: add path from phyup irq to SAS framework John Garry
2015-11-16 13:06   ` [PATCH v4 22/32] scsi: hisi_sas: add ssp command function John Garry
2015-11-16 13:06   ` [PATCH v4 25/32] scsi: hisi_sas: add abnormal irq handler John Garry
2015-11-16 13:06   ` [PATCH v4 26/32] scsi: hisi_sas: add bcast interrupt handler John Garry
2015-11-16 13:06   ` [PATCH v4 28/32] scsi: hisi_sas: add scan finished and start John Garry
2015-11-16 13:06   ` [PATCH v4 31/32] scsi: hisi_sas: add fatal irq handler John Garry
2015-11-16 13:05 ` [PATCH v4 03/32] scsi: hisi_sas: add initial bare main driver John Garry
2015-11-16 17:35   ` kbuild test robot
2015-11-17 16:24     ` John Garry
2015-11-16 13:05 ` John Garry [this message]
2015-11-16 21:10   ` [PATCH v4 05/32] scsi: hisi_sas: scan device tree kbuild test robot
2015-11-16 13:05 ` [PATCH v4 06/32] scsi: hisi_sas: add HW DMA structures John Garry
2015-11-16 13:05 ` [PATCH v4 07/32] scsi: hisi_sas: allocate memories and create pools John Garry
2015-11-16 13:05 ` [PATCH v4 08/32] scsi: hisi_sas: add hisi_sas_remove John Garry
2015-11-16 13:05 ` [PATCH v4 09/32] scsi: hisi_sas: add slot init code John Garry
2015-11-16 13:05 ` [PATCH v4 10/32] scsi: hisi_sas: add cq structure initialization John Garry
2015-11-16 13:05 ` [PATCH v4 11/32] scsi: hisi_sas: add phy SAS ADDR initialization John Garry
2015-11-16 13:06 ` [PATCH v4 14/32] scsi: hisi_sas: add hisi sas device type John Garry
2015-11-16 13:06 ` [PATCH v4 16/32] scsi: hisi_sas: add timer and spinlock init John Garry
2015-11-16 13:06 ` [PATCH v4 18/32] scsi: hisi_sas: add v1 hardware register definitions John Garry
2015-11-16 13:06 ` [PATCH v4 20/32] scsi: hisi_sas: add v1 hw interrupt init John Garry
2015-11-16 13:06 ` [PATCH v4 23/32] scsi: hisi_sas: add cq interrupt handler John Garry
2015-11-16 13:06 ` [PATCH v4 24/32] scsi: hisi_sas: add dev_found and dev_gone John Garry
2015-11-16 13:06 ` [PATCH v4 27/32] scsi: hisi_sas: add smp protocol support John Garry
2015-11-16 13:06 ` [PATCH v4 29/32] scsi: hisi_sas: add tmf methods John Garry
2015-11-16 13:06 ` [PATCH v4 30/32] scsi: hisi_sas: add control phy handler John Garry
2015-11-16 13:06 ` [PATCH v4 32/32] MAINTAINERS: add maintainer for HiSi SAS driver John Garry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1447679178-220222-6-git-send-email-john.garry@huawei.com \
    --to=john.garry@huawei.com \
    --cc=JBottomley@odin.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=hare@suse.de \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=john.garry2@mail.dcu.ie \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=xuwei5@hisilicon.com \
    --cc=zhangfei.gao@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox