From: John Garry <john.garry@huawei.com>
To: JBottomley@odin.com, robh+dt@kernel.org, pawel.moll@arm.com,
mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, arnd@arndb.de
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linuxarm@huawei.com,
john.garry2@mail.dcu.ie, hare@suse.de, xuwei5@hisilicon.com,
zhangfei.gao@linaro.org, john.garry@huawei.com
Subject: [PATCH v4 30/32] scsi: hisi_sas: add control phy handler
Date: Mon, 16 Nov 2015 21:06:16 +0800 [thread overview]
Message-ID: <1447679178-220222-31-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1447679178-220222-1-git-send-email-john.garry@huawei.com>
Add method for lldd_control_phy. Currently link rate
control and spinup hold is unsupported.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 3 +++
drivers/scsi/hisi_sas/hisi_sas_main.c | 29 +++++++++++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 23 +++++++++++++++++++++++
3 files changed, 55 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 15adeca..5b790c9 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -137,6 +137,9 @@ struct hisi_sas_hw {
struct hisi_sas_slot *slot);
int (*slot_complete)(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot, int abort);
+ void (*phy_enable)(struct hisi_hba *hisi_hba, int phy_no);
+ void (*phy_disable)(struct hisi_hba *hisi_hba, int phy_no);
+ void (*phy_hard_reset)(struct hisi_hba *hisi_hba, int phy_no);
void (*free_device)(struct hisi_hba *hisi_hba,
struct hisi_sas_device *dev);
int (*get_wideport_bitmap)(struct hisi_hba *hisi_hba, int port_id);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 4ee90eb..1377625 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -552,6 +552,34 @@ static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
return hisi_sas_task_exec(task, gfp_flags, 0, NULL);
}
+static int hisi_sas_control_phy(struct asd_sas_phy *sas_phy, enum phy_func func,
+ void *funcdata)
+{
+ struct sas_ha_struct *sas_ha = sas_phy->ha;
+ struct hisi_hba *hisi_hba = sas_ha->lldd_ha;
+ int phy_no = sas_phy->id;
+
+ switch (func) {
+ case PHY_FUNC_HARD_RESET:
+ hisi_hba->hw->phy_hard_reset(hisi_hba, phy_no);
+ break;
+
+ case PHY_FUNC_LINK_RESET:
+ hisi_hba->hw->phy_enable(hisi_hba, phy_no);
+ hisi_hba->hw->phy_hard_reset(hisi_hba, phy_no);
+ break;
+
+ case PHY_FUNC_DISABLE:
+ hisi_hba->hw->phy_disable(hisi_hba, phy_no);
+ break;
+
+ case PHY_FUNC_SET_LINK_RATE:
+ case PHY_FUNC_RELEASE_SPINUP_HOLD:
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
static void hisi_sas_task_done(struct sas_task *task)
{
@@ -932,6 +960,7 @@ static struct sas_domain_function_template hisi_sas_transport_ops = {
.lldd_dev_found = hisi_sas_dev_found,
.lldd_dev_gone = hisi_sas_dev_gone,
.lldd_execute_task = hisi_sas_queue_command,
+ .lldd_control_phy = hisi_sas_control_phy,
.lldd_abort_task = hisi_sas_abort_task,
.lldd_abort_task_set = hisi_sas_abort_task_set,
.lldd_clear_aca = hisi_sas_clear_aca,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 64b17a1..a95259c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -764,6 +764,14 @@ static void enable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
}
+static void disable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
+
+ cfg &= ~PHY_CFG_ENA_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
+}
+
static void start_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
{
config_id_frame_v1_hw(hisi_hba, phy_no);
@@ -772,6 +780,18 @@ static void start_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
enable_phy_v1_hw(hisi_hba, phy_no);
}
+static void stop_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ disable_phy_v1_hw(hisi_hba, phy_no);
+}
+
+static void phy_hard_reset_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ stop_phy_v1_hw(hisi_hba, phy_no);
+ msleep(100);
+ start_phy_v1_hw(hisi_hba, phy_no);
+}
+
static void start_phys_v1_hw(unsigned long data)
{
struct hisi_hba *hisi_hba = (struct hisi_hba *)data;
@@ -1687,6 +1707,9 @@ static const struct hisi_sas_hw hisi_sas_v1_hw = {
.get_free_slot = get_free_slot_v1_hw,
.start_delivery = start_delivery_v1_hw,
.slot_complete = slot_complete_v1_hw,
+ .phy_enable = enable_phy_v1_hw,
+ .phy_disable = disable_phy_v1_hw,
+ .phy_hard_reset = phy_hard_reset_v1_hw,
.get_wideport_bitmap = get_wideport_bitmap_v1_hw,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
next prev parent reply other threads:[~2015-11-16 13:36 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-16 13:05 [PATCH v4 00/32] HiSilicon SAS driver John Garry
2015-11-16 13:05 ` [PATCH v4 01/32] [SCSI] sas: centralise ssp frame information units John Garry
2015-11-16 13:05 ` [PATCH v4 03/32] scsi: hisi_sas: add initial bare main driver John Garry
2015-11-16 17:35 ` kbuild test robot
2015-11-17 16:24 ` John Garry
[not found] ` <1447679178-220222-1-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-11-16 13:05 ` [PATCH v4 02/32] devicetree: bindings: scsi: HiSi SAS John Garry
2015-11-16 13:56 ` Rob Herring
2015-11-16 13:05 ` [PATCH v4 04/32] scsi: hisi_sas: add scsi host registration John Garry
2015-11-16 13:05 ` [PATCH v4 12/32] scsi: hisi_sas: set dev DMA mask John Garry
2015-11-16 13:05 ` [PATCH v4 13/32] scsi: hisi_sas: add hisi_hba workqueue John Garry
2015-11-16 13:06 ` [PATCH v4 15/32] scsi: hisi_sas: add phy and port init John Garry
2015-11-16 13:06 ` [PATCH v4 17/32] scsi: hisi_sas: add v1 hw module init John Garry
2015-11-16 13:06 ` [PATCH v4 19/32] scsi: hisi_sas: add v1 HW initialisation code John Garry
2015-11-16 13:06 ` [PATCH v4 21/32] scsi: hisi_sas: add path from phyup irq to SAS framework John Garry
2015-11-16 13:06 ` [PATCH v4 22/32] scsi: hisi_sas: add ssp command function John Garry
2015-11-16 13:06 ` [PATCH v4 25/32] scsi: hisi_sas: add abnormal irq handler John Garry
2015-11-16 13:06 ` [PATCH v4 26/32] scsi: hisi_sas: add bcast interrupt handler John Garry
2015-11-16 13:06 ` [PATCH v4 28/32] scsi: hisi_sas: add scan finished and start John Garry
2015-11-16 13:06 ` [PATCH v4 31/32] scsi: hisi_sas: add fatal irq handler John Garry
2015-11-16 13:05 ` [PATCH v4 05/32] scsi: hisi_sas: scan device tree John Garry
2015-11-16 21:10 ` kbuild test robot
2015-11-16 13:05 ` [PATCH v4 06/32] scsi: hisi_sas: add HW DMA structures John Garry
2015-11-16 13:05 ` [PATCH v4 07/32] scsi: hisi_sas: allocate memories and create pools John Garry
2015-11-16 13:05 ` [PATCH v4 08/32] scsi: hisi_sas: add hisi_sas_remove John Garry
2015-11-16 13:05 ` [PATCH v4 09/32] scsi: hisi_sas: add slot init code John Garry
2015-11-16 13:05 ` [PATCH v4 10/32] scsi: hisi_sas: add cq structure initialization John Garry
2015-11-16 13:05 ` [PATCH v4 11/32] scsi: hisi_sas: add phy SAS ADDR initialization John Garry
2015-11-16 13:06 ` [PATCH v4 14/32] scsi: hisi_sas: add hisi sas device type John Garry
2015-11-16 13:06 ` [PATCH v4 16/32] scsi: hisi_sas: add timer and spinlock init John Garry
2015-11-16 13:06 ` [PATCH v4 18/32] scsi: hisi_sas: add v1 hardware register definitions John Garry
2015-11-16 13:06 ` [PATCH v4 20/32] scsi: hisi_sas: add v1 hw interrupt init John Garry
2015-11-16 13:06 ` [PATCH v4 23/32] scsi: hisi_sas: add cq interrupt handler John Garry
2015-11-16 13:06 ` [PATCH v4 24/32] scsi: hisi_sas: add dev_found and dev_gone John Garry
2015-11-16 13:06 ` [PATCH v4 27/32] scsi: hisi_sas: add smp protocol support John Garry
2015-11-16 13:06 ` [PATCH v4 29/32] scsi: hisi_sas: add tmf methods John Garry
2015-11-16 13:06 ` John Garry [this message]
2015-11-16 13:06 ` [PATCH v4 32/32] MAINTAINERS: add maintainer for HiSi SAS driver John Garry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447679178-220222-31-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=JBottomley@odin.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=hare@suse.de \
--cc=ijc+devicetree@hellion.org.uk \
--cc=john.garry2@mail.dcu.ie \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=xuwei5@hisilicon.com \
--cc=zhangfei.gao@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox