From: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
To: JBottomley-wo1vFcy6AUs@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
john.garry2-s/0ZXS5h9803lw97EnAbAg@public.gmane.org,
hare-l3A5Bk7waGM@public.gmane.org,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org
Subject: [PATCH v4 04/32] scsi: hisi_sas: add scsi host registration
Date: Mon, 16 Nov 2015 21:05:50 +0800 [thread overview]
Message-ID: <1447679178-220222-5-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1447679178-220222-1-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Add functionality to register device as a scsi host.
The SAS domain transport ops are empty at this point.
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/hisi_sas.h | 34 ++++++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 116 ++++++++++++++++++++++++++++++++++
2 files changed, 150 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index a5cec22..6f57fd1 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -23,4 +23,38 @@
#define DRV_VERSION "v1.0"
+#define HISI_SAS_MAX_PHYS 9
+#define HISI_SAS_MAX_ITCT_ENTRIES 4096
+#define HISI_SAS_MAX_DEVICES HISI_SAS_MAX_ITCT_ENTRIES
+#define HISI_SAS_COMMAND_ENTRIES 8192
+
+struct hisi_sas_phy {
+ struct asd_sas_phy sas_phy;
+};
+
+struct hisi_sas_port {
+ struct asd_sas_port sas_port;
+};
+
+struct hisi_sas_hw {
+};
+
+struct hisi_hba {
+ /* This must be the first element, used by SHOST_TO_SAS_HA */
+ struct sas_ha_struct *p;
+
+ struct platform_device *pdev;
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ int n_phy;
+
+ /* SCSI/SAS glue */
+ struct sas_ha_struct sha;
+ struct Scsi_Host *shost;
+ struct hisi_sas_phy phy[HISI_SAS_MAX_PHYS];
+ struct hisi_sas_port port[HISI_SAS_MAX_PHYS];
+ const struct hisi_sas_hw *hw; /* Low level hw interface */
+};
+
+#define HISI_SAS_SGE_PAGE_CNT SCSI_MAX_SG_SEGMENTS
#endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 7201363..4fd000e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -14,9 +14,125 @@
static struct scsi_transport_template *hisi_sas_stt;
+static struct scsi_host_template hisi_sas_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .queuecommand = sas_queuecommand,
+ .target_alloc = sas_target_alloc,
+ .slave_configure = sas_slave_configure,
+ .change_queue_depth = sas_change_queue_depth,
+ .bios_param = sas_bios_param,
+ .can_queue = 1,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
+ .use_clustering = ENABLE_CLUSTERING,
+ .eh_device_reset_handler = sas_eh_device_reset_handler,
+ .eh_bus_reset_handler = sas_eh_bus_reset_handler,
+ .target_destroy = sas_target_destroy,
+ .ioctl = sas_ioctl,
+};
+
static struct sas_domain_function_template hisi_sas_transport_ops = {
};
+static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
+ const struct hisi_sas_hw *hw)
+{
+ struct Scsi_Host *shost;
+ struct hisi_hba *hisi_hba;
+ struct device *dev = &pdev->dev;
+
+ shost = scsi_host_alloc(&hisi_sas_sht, sizeof(*hisi_hba));
+ if (!shost)
+ goto err_out;
+ hisi_hba = shost_priv(shost);
+
+ hisi_hba->hw = hw;
+ hisi_hba->pdev = pdev;
+ hisi_hba->shost = shost;
+ SHOST_TO_SAS_HA(shost) = &hisi_hba->sha;
+
+ return shost;
+err_out:
+ dev_err(dev, "shost alloc failed\n");
+ return NULL;
+}
+
+int hisi_sas_probe(struct platform_device *pdev,
+ const struct hisi_sas_hw *hw)
+{
+ struct Scsi_Host *shost;
+ struct hisi_hba *hisi_hba;
+ struct device *dev = &pdev->dev;
+ struct asd_sas_phy **arr_phy;
+ struct asd_sas_port **arr_port;
+ struct sas_ha_struct *sha;
+ int rc, phy_nr, port_nr, i;
+
+ shost = hisi_sas_shost_alloc(pdev, hw);
+ if (!shost) {
+ rc = -ENOMEM;
+ goto err_out_ha;
+ }
+
+ sha = SHOST_TO_SAS_HA(shost);
+ hisi_hba = shost_priv(shost);
+ platform_set_drvdata(pdev, sha);
+ hisi_hba->n_phy = HISI_SAS_MAX_PHYS;
+ phy_nr = port_nr = hisi_hba->n_phy;
+
+ arr_phy = devm_kcalloc(dev, phy_nr, sizeof(void *), GFP_KERNEL);
+ arr_port = devm_kcalloc(dev, port_nr, sizeof(void *), GFP_KERNEL);
+ if (!arr_phy || !arr_port)
+ return -ENOMEM;
+
+ sha->sas_phy = arr_phy;
+ sha->sas_port = arr_port;
+ sha->core.shost = shost;
+ sha->lldd_ha = hisi_hba;
+
+ shost->transportt = hisi_sas_stt;
+ shost->max_id = HISI_SAS_MAX_DEVICES;
+ shost->max_lun = ~0;
+ shost->max_channel = 1;
+ shost->max_cmd_len = 16;
+ shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
+ shost->can_queue = HISI_SAS_COMMAND_ENTRIES;
+ shost->cmd_per_lun = HISI_SAS_COMMAND_ENTRIES;
+
+ sha->sas_ha_name = DRV_NAME;
+ sha->dev = &hisi_hba->pdev->dev;
+ sha->lldd_module = THIS_MODULE;
+ sha->sas_addr = &hisi_hba->sas_addr[0];
+ sha->num_phys = hisi_hba->n_phy;
+ sha->core.shost = hisi_hba->shost;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ sha->sas_phy[i] = &hisi_hba->phy[i].sas_phy;
+ sha->sas_port[i] = &hisi_hba->port[i].sas_port;
+ }
+
+ rc = scsi_add_host(shost, &pdev->dev);
+ if (rc)
+ goto err_out_ha;
+
+ rc = sas_register_ha(sha);
+ if (rc)
+ goto err_out_register_ha;
+
+ scsi_scan_host(shost);
+
+ return 0;
+
+err_out_register_ha:
+ scsi_remove_host(shost);
+err_out_ha:
+ kfree(shost);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(hisi_sas_probe);
+
static __init int hisi_sas_init(void)
{
pr_info("hisi_sas: driver version %s\n", DRV_VERSION);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-11-16 13:05 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-16 13:05 [PATCH v4 00/32] HiSilicon SAS driver John Garry
2015-11-16 13:05 ` [PATCH v4 01/32] [SCSI] sas: centralise ssp frame information units John Garry
2015-11-16 13:05 ` [PATCH v4 03/32] scsi: hisi_sas: add initial bare main driver John Garry
2015-11-16 17:35 ` kbuild test robot
2015-11-17 16:24 ` John Garry
[not found] ` <1447679178-220222-1-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-11-16 13:05 ` [PATCH v4 02/32] devicetree: bindings: scsi: HiSi SAS John Garry
2015-11-16 13:56 ` Rob Herring
2015-11-16 13:05 ` John Garry [this message]
2015-11-16 13:05 ` [PATCH v4 12/32] scsi: hisi_sas: set dev DMA mask John Garry
2015-11-16 13:05 ` [PATCH v4 13/32] scsi: hisi_sas: add hisi_hba workqueue John Garry
2015-11-16 13:06 ` [PATCH v4 15/32] scsi: hisi_sas: add phy and port init John Garry
2015-11-16 13:06 ` [PATCH v4 17/32] scsi: hisi_sas: add v1 hw module init John Garry
2015-11-16 13:06 ` [PATCH v4 19/32] scsi: hisi_sas: add v1 HW initialisation code John Garry
2015-11-16 13:06 ` [PATCH v4 21/32] scsi: hisi_sas: add path from phyup irq to SAS framework John Garry
2015-11-16 13:06 ` [PATCH v4 22/32] scsi: hisi_sas: add ssp command function John Garry
2015-11-16 13:06 ` [PATCH v4 25/32] scsi: hisi_sas: add abnormal irq handler John Garry
2015-11-16 13:06 ` [PATCH v4 26/32] scsi: hisi_sas: add bcast interrupt handler John Garry
2015-11-16 13:06 ` [PATCH v4 28/32] scsi: hisi_sas: add scan finished and start John Garry
2015-11-16 13:06 ` [PATCH v4 31/32] scsi: hisi_sas: add fatal irq handler John Garry
2015-11-16 13:05 ` [PATCH v4 05/32] scsi: hisi_sas: scan device tree John Garry
2015-11-16 21:10 ` kbuild test robot
2015-11-16 13:05 ` [PATCH v4 06/32] scsi: hisi_sas: add HW DMA structures John Garry
2015-11-16 13:05 ` [PATCH v4 07/32] scsi: hisi_sas: allocate memories and create pools John Garry
2015-11-16 13:05 ` [PATCH v4 08/32] scsi: hisi_sas: add hisi_sas_remove John Garry
2015-11-16 13:05 ` [PATCH v4 09/32] scsi: hisi_sas: add slot init code John Garry
2015-11-16 13:05 ` [PATCH v4 10/32] scsi: hisi_sas: add cq structure initialization John Garry
2015-11-16 13:05 ` [PATCH v4 11/32] scsi: hisi_sas: add phy SAS ADDR initialization John Garry
2015-11-16 13:06 ` [PATCH v4 14/32] scsi: hisi_sas: add hisi sas device type John Garry
2015-11-16 13:06 ` [PATCH v4 16/32] scsi: hisi_sas: add timer and spinlock init John Garry
2015-11-16 13:06 ` [PATCH v4 18/32] scsi: hisi_sas: add v1 hardware register definitions John Garry
2015-11-16 13:06 ` [PATCH v4 20/32] scsi: hisi_sas: add v1 hw interrupt init John Garry
2015-11-16 13:06 ` [PATCH v4 23/32] scsi: hisi_sas: add cq interrupt handler John Garry
2015-11-16 13:06 ` [PATCH v4 24/32] scsi: hisi_sas: add dev_found and dev_gone John Garry
2015-11-16 13:06 ` [PATCH v4 27/32] scsi: hisi_sas: add smp protocol support John Garry
2015-11-16 13:06 ` [PATCH v4 29/32] scsi: hisi_sas: add tmf methods John Garry
2015-11-16 13:06 ` [PATCH v4 30/32] scsi: hisi_sas: add control phy handler John Garry
2015-11-16 13:06 ` [PATCH v4 32/32] MAINTAINERS: add maintainer for HiSi SAS driver John Garry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447679178-220222-5-git-send-email-john.garry@huawei.com \
--to=john.garry-hv44wf8li93qt0dzr+alfa@public.gmane.org \
--cc=JBottomley-wo1vFcy6AUs@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=hare-l3A5Bk7waGM@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=john.garry2-s/0ZXS5h9803lw97EnAbAg@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox