From: Andre Przywara <andre.przywara@arm.com>
To: u-boot@lists.denx.de
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>,
Mikhail Kalashnikov <iuncuim@gmail.com>,
Yixun Lan <dlan@gentoo.org>,
Paul Kocialkowski <paulk@sys-base.io>,
linux-sunxi@lists.linux.dev, Tom Rini <trini@konsulko.com>
Subject: [PATCH v2 16/20] arm64: dts: allwinner: Add Allwinner A523 .dtsi file
Date: Fri, 18 Jul 2025 00:54:51 +0100 [thread overview]
Message-ID: <20250717235455.32528-17-andre.przywara@arm.com> (raw)
In-Reply-To: <20250717235455.32528-1-andre.przywara@arm.com>
The Allwinner A523, and its siblings A527 and T527, which share the same
die, are a new family of SoCs introduced in 2023. They features eight
Arm Cortex-A55 cores, and, among the other usual peripherals, a PCIe and
USB 3.0 controller.
Add the basic SoC devicetree .dtsi for the chip, describing the
fundamental peripherals: the cores, GIC, timer, RTC, CCU and pinctrl.
Also some other peripherals are fully compatible with previous IP, so
add the USB and MMC nodes as well.
The other peripherals will be added in the future, once we understand
their compatibility and DT requirements.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307005712.16828-9-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
[ upstream commit: 35ac96f796649346c9b0440413dc6c5138249b3e ]
(cherry picked from commit 247a3572abcfd7a0d48e12f8f810f1cbae5ce4f4)
---
.../src/arm64/allwinner/sun55i-a523.dtsi | 598 ++++++++++++++++++
1 file changed, 598 insertions(+)
create mode 100644 dts/upstream/src/arm64/allwinner/sun55i-a523.dtsi
diff --git a/dts/upstream/src/arm64/allwinner/sun55i-a523.dtsi b/dts/upstream/src/arm64/allwinner/sun55i-a523.dtsi
new file mode 100644
index 00000000000..ee485899ba0
--- /dev/null
+++ b/dts/upstream/src/arm64/allwinner/sun55i-a523.dtsi
@@ -0,0 +1,598 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2023-2024 Arm Ltd.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun55i-a523-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-r-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-r-ccu.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a55";
+ device_type = "cpu";
+ reg = <0x000>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@100 {
+ compatible = "arm,cortex-a55";
+ device_type = "cpu";
+ reg = <0x100>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@200 {
+ compatible = "arm,cortex-a55";
+ device_type = "cpu";
+ reg = <0x200>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@300 {
+ compatible = "arm,cortex-a55";
+ device_type = "cpu";
+ reg = <0x300>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@400 {
+ compatible = "arm,cortex-a55";
+ device_type = "cpu";
+ reg = <0x400>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@500 {
+ compatible = "arm,cortex-a55";
+ device_type = "cpu";
+ reg = <0x500>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@600 {
+ compatible = "arm,cortex-a55";
+ device_type = "cpu";
+ reg = <0x600>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@700 {
+ compatible = "arm,cortex-a55";
+ device_type = "cpu";
+ reg = <0x700>;
+ enable-method = "psci";
+ };
+ };
+
+ osc24M: osc24M-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ pmu {
+ compatible = "arm,cortex-a55-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ arm,no-tick-in-suspend;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x40000000>;
+
+ pio: pinctrl@2000000 {
+ compatible = "allwinner,sun55i-a523-pinctrl";
+ reg = <0x2000000 0x800>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ mmc0_pins: mmc0-pins {
+ pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5";
+ allwinner,pinmux = <2>;
+ function = "mmc0";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ /omit-if-no-ref/
+ mmc1_pins: mmc1-pins {
+ pins = "PG0" ,"PG1", "PG2", "PG3", "PG4", "PG5";
+ allwinner,pinmux = <2>;
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pins = "PC0", "PC1" ,"PC5", "PC6", "PC8",
+ "PC9", "PC10", "PC11", "PC13", "PC14",
+ "PC15", "PC16";
+ allwinner,pinmux = <3>;
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ uart0_pb_pins: uart0-pb-pins {
+ pins = "PB9", "PB10";
+ allwinner,pinmux = <2>;
+ function = "uart0";
+ };
+ };
+
+ ccu: clock-controller@2001000 {
+ compatible = "allwinner,sun55i-a523-ccu";
+ reg = <0x02001000 0x1000>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>,
+ <&rtc CLK_IOSC>, <&rtc CLK_OSC32K_FANOUT>;
+ clock-names = "hosc", "losc",
+ "iosc", "losc-fanout";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ mmc0: mmc@4020000 {
+ compatible = "allwinner,sun55i-a523-mmc",
+ "allwinner,sun20i-d1-mmc";
+ reg = <0x04020000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ status = "disabled";
+
+ max-frequency = <150000000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@4021000 {
+ compatible = "allwinner,sun55i-a523-mmc",
+ "allwinner,sun20i-d1-mmc";
+ reg = <0x04021000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ status = "disabled";
+
+ max-frequency = <150000000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@4022000 {
+ compatible = "allwinner,sun55i-a523-mmc",
+ "allwinner,sun20i-d1-mmc";
+ reg = <0x04022000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC2>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ status = "disabled";
+
+ max-frequency = <150000000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ wdt: watchdog@2050000 {
+ compatible = "allwinner,sun55i-a523-wdt";
+ reg = <0x2050000 0x20>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+ clock-names = "hosc", "losc";
+ status = "okay";
+ };
+
+ uart0: serial@2500000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x02500000 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
+ status = "disabled";
+ };
+
+ uart1: serial@2500400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x02500400 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ status = "disabled";
+ };
+
+ uart2: serial@2500800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x02500800 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ status = "disabled";
+ };
+
+ uart3: serial@2500c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x02500c00 0x400>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ status = "disabled";
+ };
+
+ uart4: serial@2501000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x02501000 0x400>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
+ status = "disabled";
+ };
+
+ uart5: serial@2501400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x02501400 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART5>;
+ resets = <&ccu RST_BUS_UART5>;
+ status = "disabled";
+ };
+
+ uart6: serial@2501800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x02501800 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART6>;
+ resets = <&ccu RST_BUS_UART6>;
+ status = "disabled";
+ };
+
+ uart7: serial@2501c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x02501c00 0x400>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART7>;
+ resets = <&ccu RST_BUS_UART7>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@2502000 {
+ compatible = "allwinner,sun55i-a523-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x2502000 0x400>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@2502400 {
+ compatible = "allwinner,sun55i-a523-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x2502400 0x400>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@2502800 {
+ compatible = "allwinner,sun55i-a523-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x2502800 0x400>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c@2502c00 {
+ compatible = "allwinner,sun55i-a523-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x2502c00 0x400>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C3>;
+ resets = <&ccu RST_BUS_I2C3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c4: i2c@2503000 {
+ compatible = "allwinner,sun55i-a523-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x2503000 0x400>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C4>;
+ resets = <&ccu RST_BUS_I2C4>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c5: i2c@2503400 {
+ compatible = "allwinner,sun55i-a523-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x2503400 0x400>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C5>;
+ resets = <&ccu RST_BUS_I2C5>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gic: interrupt-controller@3400000 {
+ compatible = "arm,gic-v3";
+ #address-cells = <1>;
+ #interrupt-cells = <3>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ reg = <0x3400000 0x10000>,
+ <0x3460000 0x100000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ dma-noncoherent;
+
+ its: msi-controller@3440000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x3440000 0x20000>;
+ msi-controller;
+ #msi-cells = <1>;
+ dma-noncoherent;
+ };
+ };
+
+ usb_otg: usb@4100000 {
+ compatible = "allwinner,sun55i-a523-musb",
+ "allwinner,sun8i-a33-musb";
+ reg = <0x4100000 0x400>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ clocks = <&ccu CLK_BUS_OTG>;
+ resets = <&ccu RST_BUS_OTG>;
+ extcon = <&usbphy 0>;
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy: phy@4100400 {
+ compatible = "allwinner,sun55i-a523-usb-phy",
+ "allwinner,sun20i-d1-usb-phy";
+ reg = <0x4100400 0x100>,
+ <0x4101800 0x100>,
+ <0x4200800 0x100>;
+ reg-names = "phy_ctrl",
+ "pmu0",
+ "pmu1";
+ clocks = <&osc24M>,
+ <&osc24M>;
+ clock-names = "usb0_phy",
+ "usb1_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>;
+ reset-names = "usb0_reset",
+ "usb1_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci0: usb@4101000 {
+ compatible = "allwinner,sun55i-a523-ehci",
+ "generic-ehci";
+ reg = <0x4101000 0x100>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_BUS_EHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_OHCI0>,
+ <&ccu RST_BUS_EHCI0>;
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci0: usb@4101400 {
+ compatible = "allwinner,sun55i-a523-ohci",
+ "generic-ohci";
+ reg = <0x4101400 0x100>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_OHCI0>;
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci1: usb@4200000 {
+ compatible = "allwinner,sun55i-a523-ehci",
+ "generic-ehci";
+ reg = <0x4200000 0x100>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI1>,
+ <&ccu CLK_BUS_EHCI1>,
+ <&ccu CLK_USB_OHCI1>;
+ resets = <&ccu RST_BUS_OHCI1>,
+ <&ccu RST_BUS_EHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci1: usb@4200400 {
+ compatible = "allwinner,sun55i-a523-ohci",
+ "generic-ohci";
+ reg = <0x4200400 0x100>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI1>,
+ <&ccu CLK_USB_OHCI1>;
+ resets = <&ccu RST_BUS_OHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ r_ccu: clock-controller@7010000 {
+ compatible = "allwinner,sun55i-a523-r-ccu";
+ reg = <0x7010000 0x250>;
+ clocks = <&osc24M>,
+ <&rtc CLK_OSC32K>,
+ <&rtc CLK_IOSC>,
+ <&ccu CLK_PLL_PERIPH0_200M>,
+ <&ccu CLK_PLL_AUDIO0_4X>;
+ clock-names = "hosc",
+ "losc",
+ "iosc",
+ "pll-periph",
+ "pll-audio";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ nmi_intc: interrupt-controller@7010320 {
+ compatible = "allwinner,sun55i-a523-nmi";
+ reg = <0x07010320 0xc>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ r_pio: pinctrl@7022000 {
+ compatible = "allwinner,sun55i-a523-r-pinctrl";
+ reg = <0x7022000 0x800>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB0>,
+ <&osc24M>,
+ <&rtc CLK_OSC32K>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ r_i2c_pins: r-i2c-pins {
+ pins = "PL0" ,"PL1";
+ allwinner,pinmux = <2>;
+ function = "r_i2c0";
+ };
+ };
+
+ r_i2c0: i2c@7081400 {
+ compatible = "allwinner,sun55i-a523-i2c",
+ "allwinner,sun8i-v536-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x07081400 0x400>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_BUS_R_I2C0>;
+ resets = <&r_ccu RST_BUS_R_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_i2c_pins>;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ rtc: rtc@7090000 {
+ compatible = "allwinner,sun55i-a523-rtc",
+ "allwinner,sun50i-r329-rtc";
+ reg = <0x7090000 0x400>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_BUS_R_RTC>,
+ <&osc24M>,
+ <&r_ccu CLK_R_AHB>;
+ clock-names = "bus", "hosc", "ahb";
+ #clock-cells = <1>;
+ };
+ };
+};
--
2.46.3
next prev parent reply other threads:[~2025-07-17 23:57 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-17 23:54 [PATCH v2 00/20] sunxi: Add Allwinner A523 support Andre Przywara
2025-07-17 23:54 ` [PATCH v2 01/20] sunxi: clock: H6: unify PLL control bit definitions Andre Przywara
2025-07-17 23:54 ` [PATCH v2 02/20] sunxi: clock: H6: factor out clock_set_pll() Andre Przywara
2025-07-17 23:54 ` [PATCH v2 03/20] sunxi: clock: H6: factor out H6/H616 CPU clock setup Andre Przywara
2025-07-17 23:54 ` [PATCH v2 04/20] sunxi: clock: H6: add A523 CPU PLL support Andre Przywara
2025-07-17 23:54 ` [PATCH v2 05/20] sunxi: spl: add support for Allwinner A523 watchdog Andre Przywara
2025-07-17 23:54 ` [PATCH v2 06/20] clk: sunxi: Add support for the A523 CCU Andre Przywara
2025-07-17 23:54 ` [PATCH v2 07/20] clk: sunxi: Add support for the A523 -R CCU Andre Przywara
2025-07-17 23:54 ` [PATCH v2 08/20] pinctrl: sunxi: add Allwinner A523 pinctrl description Andre Przywara
2025-07-17 23:54 ` [PATCH v2 09/20] sunxi: mmc: add support for Allwinner A523 MMC mod clock Andre Przywara
2025-07-22 0:32 ` Andre Przywara
2025-07-17 23:54 ` [PATCH v2 10/20] power: regulator: add AXP323 support Andre Przywara
2025-07-17 23:54 ` [PATCH v2 11/20] sunxi: update cpu_sunxi_ncat2.h Andre Przywara
2025-07-17 23:54 ` [PATCH v2 12/20] sunxi: sun50i_h6: add A523 SPL clock setup code Andre Przywara
2025-07-22 0:14 ` Andre Przywara
2025-07-27 20:15 ` Jernej Škrabec
2025-07-17 23:54 ` [PATCH v2 13/20] sunxi: A523: add DRAM initialisation routine Andre Przywara
2025-07-27 20:16 ` Jernej Škrabec
2025-07-17 23:54 ` [PATCH v2 14/20] sunxi: A523: add DDR3 DRAM support Andre Przywara
2025-07-25 4:44 ` Mikhail Kalashnikov
2025-07-25 23:48 ` Andre Przywara
2025-07-26 0:04 ` [PATCH] FIXUP! a523: DDR3: rework Andre Przywara
2025-07-17 23:54 ` [PATCH v2 15/20] sunxi: add basic A523 support Andre Przywara
2025-07-17 23:54 ` Andre Przywara [this message]
2025-07-17 23:54 ` [PATCH v2 17/20] arm64: dts: allwinner: a523: add X96Q-Pro+ support Andre Przywara
2025-07-17 23:54 ` [PATCH v2 18/20] arm64: dts: allwinner: a523: add Radxa A5E support Andre Przywara
2025-07-17 23:54 ` [PATCH v2 19/20] arm64: dts: allwinner: a523: add Avaota-A1 router support Andre Przywara
2025-07-17 23:54 ` [PATCH v2 20/20] sunxi: A523: add defconfigs for three boards Andre Przywara
2025-07-22 0:35 ` Andre Przywara
2025-07-22 2:49 ` Yixun Lan
2025-07-22 10:30 ` Andre Przywara
2025-07-19 2:05 ` [PATCH v2 00/20] sunxi: Add Allwinner A523 support Yixun Lan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250717235455.32528-17-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=dlan@gentoo.org \
--cc=iuncuim@gmail.com \
--cc=jernej.skrabec@gmail.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=paulk@sys-base.io \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox