From: Andre Przywara <andre.przywara@arm.com>
To: u-boot@lists.denx.de
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>,
Mikhail Kalashnikov <iuncuim@gmail.com>,
Yixun Lan <dlan@gentoo.org>,
Paul Kocialkowski <paulk@sys-base.io>,
linux-sunxi@lists.linux.dev, Tom Rini <trini@konsulko.com>
Subject: [PATCH v2 01/20] sunxi: clock: H6: unify PLL control bit definitions
Date: Fri, 18 Jul 2025 00:54:36 +0100 [thread overview]
Message-ID: <20250717235455.32528-2-andre.przywara@arm.com> (raw)
In-Reply-To: <20250717235455.32528-1-andre.przywara@arm.com>
The Allwinner PLLs share most of their control bits, they differ mostly
in the factors and dividers.
Drop the PLL specific definition of those common bits, and use one
shared macro, for all PLLs.
This requires changing the users in the SPL clock and DRAM code.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
.../include/asm/arch-sunxi/clock_sun50i_h6.h | 20 +++++++------------
arch/arm/mach-sunxi/clock_sun50i_h6.c | 13 +++++++-----
arch/arm/mach-sunxi/dram_sun50i_a133.c | 10 +++++-----
arch/arm/mach-sunxi/dram_sun50i_h6.c | 6 +++---
arch/arm/mach-sunxi/dram_sun50i_h616.c | 6 +++---
5 files changed, 26 insertions(+), 29 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
index 575dff68804..37a620c9866 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
@@ -31,29 +31,23 @@
#define CCU_H6_UART_GATE_RESET 0x90c
#define CCU_H6_I2C_GATE_RESET 0x91c
-/* pll1 bit field */
-#define CCM_PLL1_CTRL_EN BIT(31)
-#define CCM_PLL1_LDO_EN BIT(30)
-#define CCM_PLL1_LOCK_EN BIT(29)
-#define CCM_PLL1_LOCK BIT(28)
-#define CCM_PLL1_OUT_EN BIT(27)
+/* PLL bit fields */
+#define CCM_PLL_CTRL_EN BIT(31)
+#define CCM_PLL_LDO_EN BIT(30)
+#define CCM_PLL_LOCK_EN BIT(29)
+#define CCM_PLL_LOCK BIT(28)
+#define CCM_PLL_OUT_EN BIT(27)
+#define CCM_PLL1_UPDATE BIT(26)
#define CCM_PLL1_CLOCK_TIME_2 (2 << 24)
#define CCM_PLL1_CTRL_P(p) ((p) << 16)
#define CCM_PLL1_CTRL_N(n) (((n) - 1) << 8)
/* pll5 bit field */
-#define CCM_PLL5_CTRL_EN BIT(31)
-#define CCM_PLL5_LOCK_EN BIT(29)
-#define CCM_PLL5_LOCK BIT(28)
-#define CCM_PLL5_OUT_EN BIT(27)
#define CCM_PLL5_CTRL_N(n) (((n) - 1) << 8)
#define CCM_PLL5_CTRL_DIV1(div1) ((div1) << 0)
#define CCM_PLL5_CTRL_DIV2(div0) ((div0) << 1)
/* pll6 bit field */
-#define CCM_PLL6_CTRL_EN BIT(31)
-#define CCM_PLL6_LOCK_EN BIT(29)
-#define CCM_PLL6_LOCK BIT(28)
#define CCM_PLL6_CTRL_P0_SHIFT 16
#define CCM_PLL6_CTRL_P0_MASK (0x7 << CCM_PLL6_CTRL_P0_SHIFT)
#define CCM_PLL6_CTRL_N_SHIFT 8
diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c
index 3f375a51965..2f2fd5df93d 100644
--- a/arch/arm/mach-sunxi/clock_sun50i_h6.c
+++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c
@@ -1,3 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0+
+
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
@@ -31,7 +33,7 @@ void clock_init_safe(void)
clock_set_pll1(408000000);
writel(CCM_PLL6_DEFAULT, ccm + CCU_H6_PLL6_CFG);
- while (!(readl(ccm + CCU_H6_PLL6_CFG) & CCM_PLL6_LOCK))
+ while (!(readl(ccm + CCU_H6_PLL6_CFG) & CCM_PLL_LOCK))
;
clrsetbits_le32(ccm + CCU_H6_CPU_AXI_CFG,
@@ -85,15 +87,16 @@ void clock_set_pll1(unsigned int clk)
writel(val, ccm + CCU_H6_CPU_AXI_CFG);
/* clk = 24*n/p, p is ignored if clock is >288MHz */
- val = CCM_PLL1_CTRL_EN | CCM_PLL1_LOCK_EN | CCM_PLL1_CLOCK_TIME_2;
+ val = CCM_PLL_CTRL_EN | CCM_PLL_LOCK_EN | CCM_PLL1_CLOCK_TIME_2;
val |= CCM_PLL1_CTRL_N(clk / 24000000);
if (IS_ENABLED(CONFIG_MACH_SUN50I_H616) ||
IS_ENABLED(CONFIG_MACH_SUN50I_A133))
- val |= CCM_PLL1_OUT_EN;
+ val |= CCM_PLL_OUT_EN;
if (IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2))
- val |= CCM_PLL1_OUT_EN | CCM_PLL1_LDO_EN;
+ val |= CCM_PLL_OUT_EN | CCM_PLL_LDO_EN;
writel(val, ccm + CCU_H6_PLL1_CFG);
- while (!(readl(ccm + CCU_H6_PLL1_CFG) & CCM_PLL1_LOCK)) {}
+ while (!(readl(ccm + CCU_H6_PLL1_CFG) & CCM_PLL_LOCK))
+ ;
/* Switch CPU to PLL1 */
val = readl(ccm + CCU_H6_CPU_AXI_CFG);
diff --git a/arch/arm/mach-sunxi/dram_sun50i_a133.c b/arch/arm/mach-sunxi/dram_sun50i_a133.c
index a0fca3738f4..3a231141168 100644
--- a/arch/arm/mach-sunxi/dram_sun50i_a133.c
+++ b/arch/arm/mach-sunxi/dram_sun50i_a133.c
@@ -78,19 +78,19 @@ static void mctl_clk_init(u32 clk)
clrbits_le32(ccm + CCU_H6_MBUS_CFG, MBUS_RESET);
clrbits_le32(ccm + CCU_H6_DRAM_GATE_RESET, BIT(GATE_SHIFT));
clrbits_le32(ccm + CCU_H6_DRAM_GATE_RESET, BIT(RESET_SHIFT));
- clrbits_le32(ccm + CCU_H6_PLL5_CFG, CCM_PLL5_CTRL_EN);
+ clrbits_le32(ccm + CCU_H6_PLL5_CFG, CCM_PLL_CTRL_EN);
clrbits_le32(ccm + CCU_H6_DRAM_CLK_CFG, DRAM_MOD_RESET);
udelay(5);
/* Set up PLL5 clock, used for DRAM */
clrsetbits_le32(ccm + CCU_H6_PLL5_CFG, 0xff03,
- CCM_PLL5_CTRL_N((clk * 2) / 24) | CCM_PLL5_CTRL_EN);
+ CCM_PLL5_CTRL_N((clk * 2) / 24) | CCM_PLL_CTRL_EN);
setbits_le32(ccm + CCU_H6_PLL5_CFG, BIT(24));
clrsetbits_le32(ccm + CCU_H6_PLL5_CFG, 0x3,
- CCM_PLL5_LOCK_EN | CCM_PLL5_CTRL_EN | BIT(30));
- clrbits_le32(ccm + CCU_H6_PLL5_CFG, 0x3 | BIT(30));
+ CCM_PLL_LOCK_EN | CCM_PLL_CTRL_EN | CCM_PLL_LDO_EN);
+ clrbits_le32(ccm + CCU_H6_PLL5_CFG, 0x3 | CCM_PLL_LDO_EN);
mctl_await_completion(ccm + CCU_H6_PLL5_CFG,
- CCM_PLL5_LOCK, CCM_PLL5_LOCK);
+ CCM_PLL_LOCK, CCM_PLL_LOCK);
/* Enable DRAM clock and gate*/
clrbits_le32(ccm + CCU_H6_DRAM_CLK_CFG, BIT(24) | BIT(25));
diff --git a/arch/arm/mach-sunxi/dram_sun50i_h6.c b/arch/arm/mach-sunxi/dram_sun50i_h6.c
index 84fd64a2bfc..ea26e6dd327 100644
--- a/arch/arm/mach-sunxi/dram_sun50i_h6.c
+++ b/arch/arm/mach-sunxi/dram_sun50i_h6.c
@@ -167,16 +167,16 @@ static void mctl_sys_init(u32 clk_rate)
clrbits_le32(ccm + CCU_H6_DRAM_GATE_RESET, BIT(0));
udelay(5);
writel(0, ccm + CCU_H6_DRAM_GATE_RESET);
- clrbits_le32(ccm + CCU_H6_PLL5_CFG, CCM_PLL5_CTRL_EN);
+ clrbits_le32(ccm + CCU_H6_PLL5_CFG, CCM_PLL_CTRL_EN);
clrbits_le32(ccm + CCU_H6_DRAM_CLK_CFG, DRAM_MOD_RESET);
udelay(5);
/* Set PLL5 rate to doubled DRAM clock rate */
- writel(CCM_PLL5_CTRL_EN | CCM_PLL5_LOCK_EN |
+ writel(CCM_PLL_CTRL_EN | CCM_PLL_LOCK_EN |
CCM_PLL5_CTRL_N(clk_rate * 2 / 24), ccm + CCU_H6_PLL5_CFG);
mctl_await_completion(ccm + CCU_H6_PLL5_CFG,
- CCM_PLL5_LOCK, CCM_PLL5_LOCK);
+ CCM_PLL_LOCK, CCM_PLL_LOCK);
/* Configure DRAM mod clock */
writel(DRAM_CLK_SRC_PLL5, ccm + CCU_H6_DRAM_CLK_CFG);
diff --git a/arch/arm/mach-sunxi/dram_sun50i_h616.c b/arch/arm/mach-sunxi/dram_sun50i_h616.c
index 5a59f82d1ef..877181016f3 100644
--- a/arch/arm/mach-sunxi/dram_sun50i_h616.c
+++ b/arch/arm/mach-sunxi/dram_sun50i_h616.c
@@ -106,16 +106,16 @@ static void mctl_sys_init(u32 clk_rate)
clrbits_le32(ccm + CCU_H6_DRAM_GATE_RESET, BIT(GATE_SHIFT));
udelay(5);
clrbits_le32(ccm + CCU_H6_DRAM_GATE_RESET, BIT(RESET_SHIFT));
- clrbits_le32(ccm + CCU_H6_PLL5_CFG, CCM_PLL5_CTRL_EN);
+ clrbits_le32(ccm + CCU_H6_PLL5_CFG, CCM_PLL_CTRL_EN);
clrbits_le32(ccm + CCU_H6_DRAM_CLK_CFG, DRAM_MOD_RESET);
udelay(5);
/* Set PLL5 rate to doubled DRAM clock rate */
- writel(CCM_PLL5_CTRL_EN | CCM_PLL5_LOCK_EN | CCM_PLL5_OUT_EN |
+ writel(CCM_PLL_CTRL_EN | CCM_PLL_LOCK_EN | CCM_PLL_OUT_EN |
CCM_PLL5_CTRL_N(clk_rate * 2 / 24), ccm + CCU_H6_PLL5_CFG);
mctl_await_completion(ccm + CCU_H6_PLL5_CFG,
- CCM_PLL5_LOCK, CCM_PLL5_LOCK);
+ CCM_PLL_LOCK, CCM_PLL_LOCK);
/* Configure DRAM mod clock */
writel(DRAM_CLK_SRC_PLL5, ccm + CCU_H6_DRAM_CLK_CFG);
--
2.46.3
next prev parent reply other threads:[~2025-07-17 23:56 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-17 23:54 [PATCH v2 00/20] sunxi: Add Allwinner A523 support Andre Przywara
2025-07-17 23:54 ` Andre Przywara [this message]
2025-07-17 23:54 ` [PATCH v2 02/20] sunxi: clock: H6: factor out clock_set_pll() Andre Przywara
2025-07-17 23:54 ` [PATCH v2 03/20] sunxi: clock: H6: factor out H6/H616 CPU clock setup Andre Przywara
2025-07-17 23:54 ` [PATCH v2 04/20] sunxi: clock: H6: add A523 CPU PLL support Andre Przywara
2025-07-17 23:54 ` [PATCH v2 05/20] sunxi: spl: add support for Allwinner A523 watchdog Andre Przywara
2025-07-17 23:54 ` [PATCH v2 06/20] clk: sunxi: Add support for the A523 CCU Andre Przywara
2025-07-17 23:54 ` [PATCH v2 07/20] clk: sunxi: Add support for the A523 -R CCU Andre Przywara
2025-07-17 23:54 ` [PATCH v2 08/20] pinctrl: sunxi: add Allwinner A523 pinctrl description Andre Przywara
2025-07-17 23:54 ` [PATCH v2 09/20] sunxi: mmc: add support for Allwinner A523 MMC mod clock Andre Przywara
2025-07-22 0:32 ` Andre Przywara
2025-07-17 23:54 ` [PATCH v2 10/20] power: regulator: add AXP323 support Andre Przywara
2025-07-17 23:54 ` [PATCH v2 11/20] sunxi: update cpu_sunxi_ncat2.h Andre Przywara
2025-07-17 23:54 ` [PATCH v2 12/20] sunxi: sun50i_h6: add A523 SPL clock setup code Andre Przywara
2025-07-22 0:14 ` Andre Przywara
2025-07-27 20:15 ` Jernej Škrabec
2025-07-17 23:54 ` [PATCH v2 13/20] sunxi: A523: add DRAM initialisation routine Andre Przywara
2025-07-27 20:16 ` Jernej Škrabec
2025-07-17 23:54 ` [PATCH v2 14/20] sunxi: A523: add DDR3 DRAM support Andre Przywara
2025-07-25 4:44 ` Mikhail Kalashnikov
2025-07-25 23:48 ` Andre Przywara
2025-07-26 0:04 ` [PATCH] FIXUP! a523: DDR3: rework Andre Przywara
2025-07-17 23:54 ` [PATCH v2 15/20] sunxi: add basic A523 support Andre Przywara
2025-07-17 23:54 ` [PATCH v2 16/20] arm64: dts: allwinner: Add Allwinner A523 .dtsi file Andre Przywara
2025-07-17 23:54 ` [PATCH v2 17/20] arm64: dts: allwinner: a523: add X96Q-Pro+ support Andre Przywara
2025-07-17 23:54 ` [PATCH v2 18/20] arm64: dts: allwinner: a523: add Radxa A5E support Andre Przywara
2025-07-17 23:54 ` [PATCH v2 19/20] arm64: dts: allwinner: a523: add Avaota-A1 router support Andre Przywara
2025-07-17 23:54 ` [PATCH v2 20/20] sunxi: A523: add defconfigs for three boards Andre Przywara
2025-07-22 0:35 ` Andre Przywara
2025-07-22 2:49 ` Yixun Lan
2025-07-22 10:30 ` Andre Przywara
2025-07-19 2:05 ` [PATCH v2 00/20] sunxi: Add Allwinner A523 support Yixun Lan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250717235455.32528-2-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=dlan@gentoo.org \
--cc=iuncuim@gmail.com \
--cc=jernej.skrabec@gmail.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=paulk@sys-base.io \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox