[PATCH -next resend 0/5] usb: musb: Switch to use dev_err_probe() helper

[PATCH -next resend 0/5] usb: musb: Switch to use dev_err_probe() helper

[Yang Yingliang]

This patchset is trying to replace dev_err() with dev_err_probe() in
the probe path.

(Resend for adding my SoB in patch #1, #2)

Yang Yingliang (5):
  usb: musb: core: Switch to use dev_err_probe() helper
  usb: musb: da8xx: Switch to use dev_err_probe() helper
  usb: musb: cppi41: Switch to use dev_err_probe() helper
  usb: musb: jz4740: Switch to use dev_err_probe() helper
  usb: musb: sunxi: Switch to use dev_err_probe() helper

 drivers/usb/musb/da8xx.c       |  8 +++-----
 drivers/usb/musb/jz4740.c      | 10 +++-------
 drivers/usb/musb/musb_core.c   |  5 ++---
 drivers/usb/musb/musb_cppi41.c |  6 ++----
 drivers/usb/musb/sunxi.c       | 29 +++++++++--------------------
 5 files changed, 19 insertions(+), 39 deletions(-)

-- 
2.25.1

[PATCH -next resend 1/5] usb: musb: core: Switch to use dev_err_probe() helper

[Yang Yingliang]

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
 drivers/usb/musb/musb_core.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index bbbcfd49fb35..37ef9d8cb8ea 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2595,9 +2595,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	musb_platform_exit(musb);
 
 fail1:
-	if (status != -EPROBE_DEFER)
-		dev_err(musb->controller,
-			"%s failed with status %d\n", __func__, status);
+	dev_err_probe(musb->controller, status,
+		      "%s failed with status\n", __func__);
 
 	musb_free(musb);
 
-- 
2.25.1

Re: [PATCH -next resend 1/5] usb: musb: core: Switch to use dev_err_probe() helper

[Sergei Shtylyov]

Hello!

On 9/26/22 5:15 PM, Yang Yingliang wrote:

> In the probe path, dev_err() can be replaced with dev_err_probe()
> which will check if error code is -EPROBE_DEFER and prints the
> error name. It also sets the defer probe reason which can be
> checked later through debugfs. It's more simple in error path.
> 
> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
> ---
>  drivers/usb/musb/musb_core.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
> index bbbcfd49fb35..37ef9d8cb8ea 100644
> --- a/drivers/usb/musb/musb_core.c
> +++ b/drivers/usb/musb/musb_core.c
> @@ -2595,9 +2595,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
>  	musb_platform_exit(musb);
>  
>  fail1:
> -	if (status != -EPROBE_DEFER)
> -		dev_err(musb->controller,
> -			"%s failed with status %d\n", __func__, status);
> +	dev_err_probe(musb->controller, status,
> +		      "%s failed with status\n", __func__);

   Printing "with status" when you no longer print the status itself has no sense.

[...]

MBR, Sergey

Re: [PATCH -next resend 1/5] usb: musb: core: Switch to use dev_err_probe() helper

[Yang Yingliang]

Hi,

On 2022/9/27 3:12, Sergei Shtylyov wrote:
> Hello!
>
> On 9/26/22 5:15 PM, Yang Yingliang wrote:
>
>> In the probe path, dev_err() can be replaced with dev_err_probe()
>> which will check if error code is -EPROBE_DEFER and prints the
>> error name. It also sets the defer probe reason which can be
>> checked later through debugfs. It's more simple in error path.
>>
>> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
>> ---
>>   drivers/usb/musb/musb_core.c | 5 ++---
>>   1 file changed, 2 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
>> index bbbcfd49fb35..37ef9d8cb8ea 100644
>> --- a/drivers/usb/musb/musb_core.c
>> +++ b/drivers/usb/musb/musb_core.c
>> @@ -2595,9 +2595,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
>>   	musb_platform_exit(musb);
>>   
>>   fail1:
>> -	if (status != -EPROBE_DEFER)
>> -		dev_err(musb->controller,
>> -			"%s failed with status %d\n", __func__, status);
>> +	dev_err_probe(musb->controller, status,
>> +		      "%s failed with status\n", __func__);
>     Printing "with status" when you no longer print the status itself has no sense.
Yes, " with status" string should be removed.

Thanks,
Yang
>
> [...]
>
> MBR, Sergey
> .

[PATCH -next resend 2/5] usb: musb: da8xx: Switch to use dev_err_probe() helper

[Yang Yingliang]

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
 drivers/usb/musb/da8xx.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index fd4ae2dd24e5..a4e55b0c52cf 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -523,11 +523,9 @@ static int da8xx_probe(struct platform_device *pdev)
 	}
 
 	glue->phy = devm_phy_get(&pdev->dev, "usb-phy");
-	if (IS_ERR(glue->phy)) {
-		if (PTR_ERR(glue->phy) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "failed to get phy\n");
-		return PTR_ERR(glue->phy);
-	}
+	if (IS_ERR(glue->phy))
+		return dev_err_probe(&pdev->dev, PTR_ERR(glue->phy),
+				     "failed to get phy\n");
 
 	glue->dev			= &pdev->dev;
 	glue->clk			= clk;
-- 
2.25.1

[PATCH -next resend 3/5] usb: musb: cppi41: Switch to use dev_err_probe() helper

[Yang Yingliang]

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
 drivers/usb/musb/musb_cppi41.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index c963cb8565f2..9589243e8951 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -718,10 +718,8 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
 
 		dc = dma_request_chan(dev->parent, str);
 		if (IS_ERR(dc)) {
-			ret = PTR_ERR(dc);
-			if (ret != -EPROBE_DEFER)
-				dev_err(dev, "Failed to request %s: %d.\n",
-					str, ret);
+			ret = dev_err_probe(dev, PTR_ERR(dc),
+					    "Failed to request %s.\n", str);
 			goto err;
 		}
 
-- 
2.25.1

[PATCH -next resend 4/5] usb: musb: jz4740: Switch to use dev_err_probe() helper

[Yang Yingliang]

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
 drivers/usb/musb/jz4740.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index 417c30bff9ca..d1e4e0deb753 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -105,7 +105,6 @@ static int jz4740_musb_init(struct musb *musb)
 		.driver_data = glue,
 		.fwnode = dev_fwnode(dev),
 	};
-	int err;
 
 	glue->musb = musb;
 
@@ -113,12 +112,9 @@ static int jz4740_musb_init(struct musb *musb)
 		musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0);
 	else
 		musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
-	if (IS_ERR(musb->xceiv)) {
-		err = PTR_ERR(musb->xceiv);
-		if (err != -EPROBE_DEFER)
-			dev_err(dev, "No transceiver configured: %d\n", err);
-		return err;
-	}
+	if (IS_ERR(musb->xceiv))
+		return dev_err_probe(dev, PTR_ERR(musb->xceiv),
+				     "No transceiver configured\n");
 
 	glue->role_sw = usb_role_switch_register(dev, &role_sw_desc);
 	if (IS_ERR(glue->role_sw)) {
-- 
2.25.1

[PATCH -next resend 5/5] usb: musb: sunxi: Switch to use dev_err_probe() helper

[Yang Yingliang]

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
 drivers/usb/musb/sunxi.c | 29 +++++++++--------------------
 1 file changed, 9 insertions(+), 20 deletions(-)

diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index 961c858fb349..7f9a999cd5ff 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -743,31 +743,20 @@ static int sunxi_musb_probe(struct platform_device *pdev)
 
 	if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) {
 		glue->rst = devm_reset_control_get(&pdev->dev, NULL);
-		if (IS_ERR(glue->rst)) {
-			if (PTR_ERR(glue->rst) == -EPROBE_DEFER)
-				return -EPROBE_DEFER;
-			dev_err(&pdev->dev, "Error getting reset %ld\n",
-				PTR_ERR(glue->rst));
-			return PTR_ERR(glue->rst);
-		}
+		if (IS_ERR(glue->rst))
+			return dev_err_probe(&pdev->dev, PTR_ERR(glue->rst),
+					     "Error getting reset\n");
 	}
 
 	glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0);
-	if (IS_ERR(glue->extcon)) {
-		if (PTR_ERR(glue->extcon) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-		dev_err(&pdev->dev, "Invalid or missing extcon\n");
-		return PTR_ERR(glue->extcon);
-	}
+	if (IS_ERR(glue->extcon))
+		return dev_err_probe(&pdev->dev, PTR_ERR(glue->extcon),
+				     "Invalid or missing extcon\n");
 
 	glue->phy = devm_phy_get(&pdev->dev, "usb");
-	if (IS_ERR(glue->phy)) {
-		if (PTR_ERR(glue->phy) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-		dev_err(&pdev->dev, "Error getting phy %ld\n",
-			PTR_ERR(glue->phy));
-		return PTR_ERR(glue->phy);
-	}
+	if (IS_ERR(glue->phy))
+		return dev_err_probe(&pdev->dev, PTR_ERR(glue->phy),
+				     "Error getting phy\n");
 
 	glue->usb_phy = usb_phy_generic_register();
 	if (IS_ERR(glue->usb_phy)) {
-- 
2.25.1