From: igor.mitsyanko.os@quantenna.com
To: linux-wireless@vger.kernel.org
Cc: sergey.matyukevich.os@quantenna.com, avinashp@quantenna.com,
johannes@sipsolutions.net,
Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Subject: [PATCH 01/27] qtnfmac: qlink: convert channel width from bitfiled to simple enum
Date: Thu, 24 Aug 2017 19:29:58 -0700 [thread overview]
Message-ID: <20170825023024.10565-2-igor.mitsyanko.os@quantenna.com> (raw)
In-Reply-To: <20170825023024.10565-1-igor.mitsyanko.os@quantenna.com>
From: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
---
drivers/net/wireless/quantenna/qtnfmac/qlink.h | 16 ++++++++--------
drivers/net/wireless/quantenna/qtnfmac/qlink_util.c | 16 ++++++++--------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/net/wireless/quantenna/qtnfmac/qlink.h b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
index a8242f6..a69fd470 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/qlink.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
@@ -108,14 +108,14 @@ enum qlink_sta_flags {
};
enum qlink_channel_width {
- QLINK_CHAN_WIDTH_5 = BIT(0),
- QLINK_CHAN_WIDTH_10 = BIT(1),
- QLINK_CHAN_WIDTH_20_NOHT = BIT(2),
- QLINK_CHAN_WIDTH_20 = BIT(3),
- QLINK_CHAN_WIDTH_40 = BIT(4),
- QLINK_CHAN_WIDTH_80 = BIT(5),
- QLINK_CHAN_WIDTH_80P80 = BIT(6),
- QLINK_CHAN_WIDTH_160 = BIT(7),
+ QLINK_CHAN_WIDTH_5 = 0,
+ QLINK_CHAN_WIDTH_10,
+ QLINK_CHAN_WIDTH_20_NOHT,
+ QLINK_CHAN_WIDTH_20,
+ QLINK_CHAN_WIDTH_40,
+ QLINK_CHAN_WIDTH_80,
+ QLINK_CHAN_WIDTH_80P80,
+ QLINK_CHAN_WIDTH_160,
};
/* QLINK Command messages related definitions
diff --git a/drivers/net/wireless/quantenna/qtnfmac/qlink_util.c b/drivers/net/wireless/quantenna/qtnfmac/qlink_util.c
index cf024c9..369b77d 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/qlink_util.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/qlink_util.c
@@ -49,28 +49,28 @@ u8 qlink_chan_width_mask_to_nl(u16 qlink_mask)
{
u8 result = 0;
- if (qlink_mask & QLINK_CHAN_WIDTH_5)
+ if (qlink_mask & BIT(QLINK_CHAN_WIDTH_5))
result |= BIT(NL80211_CHAN_WIDTH_5);
- if (qlink_mask & QLINK_CHAN_WIDTH_10)
+ if (qlink_mask & BIT(QLINK_CHAN_WIDTH_10))
result |= BIT(NL80211_CHAN_WIDTH_10);
- if (qlink_mask & QLINK_CHAN_WIDTH_20_NOHT)
+ if (qlink_mask & BIT(QLINK_CHAN_WIDTH_20_NOHT))
result |= BIT(NL80211_CHAN_WIDTH_20_NOHT);
- if (qlink_mask & QLINK_CHAN_WIDTH_20)
+ if (qlink_mask & BIT(QLINK_CHAN_WIDTH_20))
result |= BIT(NL80211_CHAN_WIDTH_20);
- if (qlink_mask & QLINK_CHAN_WIDTH_40)
+ if (qlink_mask & BIT(QLINK_CHAN_WIDTH_40))
result |= BIT(NL80211_CHAN_WIDTH_40);
- if (qlink_mask & QLINK_CHAN_WIDTH_80)
+ if (qlink_mask & BIT(QLINK_CHAN_WIDTH_80))
result |= BIT(NL80211_CHAN_WIDTH_80);
- if (qlink_mask & QLINK_CHAN_WIDTH_80P80)
+ if (qlink_mask & BIT(QLINK_CHAN_WIDTH_80P80))
result |= BIT(NL80211_CHAN_WIDTH_80P80);
- if (qlink_mask & QLINK_CHAN_WIDTH_160)
+ if (qlink_mask & BIT(QLINK_CHAN_WIDTH_160))
result |= BIT(NL80211_CHAN_WIDTH_160);
return result;
--
2.9.5
next prev parent reply other threads:[~2017-08-25 2:30 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-25 2:29 [PATCH 00/27] qtnfmac: allow to configure channel, BW, HT/VHT caps igor.mitsyanko.os
2017-08-25 2:29 ` igor.mitsyanko.os [this message]
2017-08-25 2:29 ` [PATCH 02/27] qtnfmac: make "Channel change" event report full channel info igor.mitsyanko.os
2017-08-29 14:31 ` Sergey Matyukevich
2017-08-30 1:45 ` Igor Mitsyanko
2017-08-25 2:30 ` [PATCH 03/27] qtnfmac: retreive current channel info from EP igor.mitsyanko.os
2017-08-29 14:42 ` Sergey Matyukevich
2017-08-30 1:39 ` Igor Mitsyanko
2017-08-25 2:30 ` [PATCH 04/27] qtnfmac: do not cache AP settings in driver structures igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 05/27] qtnfmac: pass all AP settings to wireless card for processing igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 06/27] qtnfmac: pass full channel definition to device on start_ap command igor.mitsyanko.os
2017-08-30 14:02 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 07/27] qtnfmac: get rid of QTNF_STATE_AP_CONFIG igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 08/27] qtnfmac: get rid of QTNF_STATE_AP_START usage igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 09/27] qtnfmac: do not cache BSS state in per-VIF structure igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 10/27] qtnfmac: do not cache channel info from "connect" command igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 11/27] qtnfmac: make encryption info a part of " igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 12/27] qtnfmac: let wifi card handle channel switch request to the same chan igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 13/27] qtnfmac: pass VIF info to SendChannel command igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 14/27] qtnfmac: do not cache CSA chandef info igor.mitsyanko.os
2017-08-29 15:44 ` Sergey Matyukevich
2017-08-30 1:48 ` Igor Mitsyanko
2017-08-30 8:05 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 15/27] qtnfmac: remove unused mac::status field igor.mitsyanko.os
2017-08-29 15:47 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 16/27] qtnfmac: stop using private driver info about current channel igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 17/27] qtnfmac: do not report channel changes until wiphy is registered igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 18/27] qtnfmac: use per-band HT/VHT info from wireless device igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 19/27] qtnfmac: initialize HT/VHT caps "can override" masks igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 20/27] qtnfmac: get rid of PHYMODE capabilities flags igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 21/27] qtnfmac: extend "IE set" TLV to include frame type info igor.mitsyanko.os
2017-08-30 12:07 ` Sergey Matyukevich
2017-08-30 12:20 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 22/27] qtnfmac: SCAN results: retreive frame type information from "IE set" TLV igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 23/27] qtnfmac: convert "Append IEs" command to QTN_TLV_ID_IE_SET usage igor.mitsyanko.os
2017-08-30 12:35 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 24/27] qtnfmac: configure and start AP interface with a single command igor.mitsyanko.os
2017-08-30 13:07 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 25/27] nl80211: look for HT/VHT capabilities in beacon's tail igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 26/27] qtnfmac: include HTCAP and VHTCAP into config AP command igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 27/27] qtnfmac: pass all CONNECT cmd params to wireless card for processing igor.mitsyanko.os
2017-08-30 16:16 ` [PATCH 00/27] qtnfmac: allow to configure channel, BW, HT/VHT caps Kalle Valo
2017-08-30 16:22 ` Kalle Valo
2017-08-30 16:28 ` Kalle Valo
2017-08-30 18:22 ` Igor Mitsyanko
2017-08-30 18:20 ` Igor Mitsyanko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170825023024.10565-2-igor.mitsyanko.os@quantenna.com \
--to=igor.mitsyanko.os@quantenna.com \
--cc=avinashp@quantenna.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=sergey.matyukevich.os@quantenna.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox