Linux wireless drivers development
 help / color / mirror / Atom feed
From: igor.mitsyanko.os@quantenna.com
To: linux-wireless@vger.kernel.org
Cc: sergey.matyukevich.os@quantenna.com, avinashp@quantenna.com,
	johannes@sipsolutions.net,
	Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Subject: [PATCH 20/27] qtnfmac: get rid of PHYMODE capabilities flags
Date: Thu, 24 Aug 2017 19:30:17 -0700	[thread overview]
Message-ID: <20170825023024.10565-21-igor.mitsyanko.os@quantenna.com> (raw)
In-Reply-To: <20170825023024.10565-1-igor.mitsyanko.os@quantenna.com>

From: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>

Supported WiFi operation modes are now identified per-band based on
HT/VHT capabilities of each band.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
---
 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c |  3 ---
 drivers/net/wireless/quantenna/qtnfmac/commands.c |  1 -
 drivers/net/wireless/quantenna/qtnfmac/core.h     |  1 -
 drivers/net/wireless/quantenna/qtnfmac/qlink.h    | 11 ++---------
 4 files changed, 2 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
index d6780f42..3faac7a 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
@@ -879,9 +879,6 @@ int qtnf_wiphy_register(struct qtnf_hw_info *hw_info, struct qtnf_wmac *mac)
 	if (ret)
 		goto out;
 
-	pr_info("MAC%u: phymode=%#x radar=%#x\n", mac->macid,
-		mac->macinfo.phymode_cap, mac->macinfo.radar_detect_widths);
-
 	wiphy->frag_threshold = mac->macinfo.frag_thr;
 	wiphy->rts_threshold = mac->macinfo.rts_thr;
 	wiphy->retry_short = mac->macinfo.sretry_limit;
diff --git a/drivers/net/wireless/quantenna/qtnfmac/commands.c b/drivers/net/wireless/quantenna/qtnfmac/commands.c
index b26cd01..79a3e75 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/commands.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/commands.c
@@ -1088,7 +1088,6 @@ qtnf_cmd_resp_proc_mac_info(struct qtnf_wmac *mac,
 	mac_info = &mac->macinfo;
 
 	mac_info->bands_cap = resp_info->bands_cap;
-	mac_info->phymode_cap = resp_info->phymode_cap;
 	memcpy(&mac_info->dev_mac, &resp_info->dev_mac,
 	       sizeof(mac_info->dev_mac));
 
diff --git a/drivers/net/wireless/quantenna/qtnfmac/core.h b/drivers/net/wireless/quantenna/qtnfmac/core.h
index 3e74736..72d4298 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/core.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/core.h
@@ -92,7 +92,6 @@ struct qtnf_vif {
 
 struct qtnf_mac_info {
 	u8 bands_cap;
-	u8 phymode_cap;
 	u8 dev_mac[ETH_ALEN];
 	u8 num_tx_chain;
 	u8 num_rx_chain;
diff --git a/drivers/net/wireless/quantenna/qtnfmac/qlink.h b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
index a9f410b..e4d3e7f 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/qlink.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
@@ -65,12 +65,6 @@ enum qlink_hw_capab {
 	QLINK_HW_SUPPORTS_REG_UPDATE	= BIT(0),
 };
 
-enum qlink_phy_mode {
-	QLINK_PHYMODE_BGN	= BIT(0),
-	QLINK_PHYMODE_AN	= BIT(1),
-	QLINK_PHYMODE_AC	= BIT(2),
-};
-
 enum qlink_iface_type {
 	QLINK_IFTYPE_AP		= 1,
 	QLINK_IFTYPE_STATION	= 2,
@@ -630,7 +624,6 @@ struct qlink_resp {
  * @vht_cap_mod_mask: mask specifying which VHT capabilities can be altered.
  * @ht_cap_mod_mask: mask specifying which HT capabilities can be altered.
  * @bands_cap: wireless bands WMAC can operate in, bitmap of &enum qlink_band.
- * @phymode_cap: PHY modes WMAC can operate in, bitmap of &enum qlink_phy_mode.
  * @max_ap_assoc_sta: Maximum number of associations supported by WMAC.
  * @radar_detect_widths: bitmask of channels BW for which WMAC can detect radar.
  * @var_info: variable-length WMAC info data.
@@ -642,10 +635,10 @@ struct qlink_resp_get_mac_info {
 	u8 num_rx_chain;
 	struct ieee80211_vht_cap vht_cap_mod_mask;
 	struct ieee80211_ht_cap ht_cap_mod_mask;
-	u8 bands_cap;
-	u8 phymode_cap;
 	__le16 max_ap_assoc_sta;
 	__le16 radar_detect_widths;
+	u8 bands_cap;
+	u8 rsvd[1];
 	u8 var_info[0];
 } __packed;
 
-- 
2.9.5

  parent reply	other threads:[~2017-08-25  2:31 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-25  2:29 [PATCH 00/27] qtnfmac: allow to configure channel, BW, HT/VHT caps igor.mitsyanko.os
2017-08-25  2:29 ` [PATCH 01/27] qtnfmac: qlink: convert channel width from bitfiled to simple enum igor.mitsyanko.os
2017-08-25  2:29 ` [PATCH 02/27] qtnfmac: make "Channel change" event report full channel info igor.mitsyanko.os
2017-08-29 14:31   ` Sergey Matyukevich
2017-08-30  1:45     ` Igor Mitsyanko
2017-08-25  2:30 ` [PATCH 03/27] qtnfmac: retreive current channel info from EP igor.mitsyanko.os
2017-08-29 14:42   ` Sergey Matyukevich
2017-08-30  1:39     ` Igor Mitsyanko
2017-08-25  2:30 ` [PATCH 04/27] qtnfmac: do not cache AP settings in driver structures igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 05/27] qtnfmac: pass all AP settings to wireless card for processing igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 06/27] qtnfmac: pass full channel definition to device on start_ap command igor.mitsyanko.os
2017-08-30 14:02   ` Sergey Matyukevich
2017-08-25  2:30 ` [PATCH 07/27] qtnfmac: get rid of QTNF_STATE_AP_CONFIG igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 08/27] qtnfmac: get rid of QTNF_STATE_AP_START usage igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 09/27] qtnfmac: do not cache BSS state in per-VIF structure igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 10/27] qtnfmac: do not cache channel info from "connect" command igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 11/27] qtnfmac: make encryption info a part of " igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 12/27] qtnfmac: let wifi card handle channel switch request to the same chan igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 13/27] qtnfmac: pass VIF info to SendChannel command igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 14/27] qtnfmac: do not cache CSA chandef info igor.mitsyanko.os
2017-08-29 15:44   ` Sergey Matyukevich
2017-08-30  1:48     ` Igor Mitsyanko
2017-08-30  8:05       ` Sergey Matyukevich
2017-08-25  2:30 ` [PATCH 15/27] qtnfmac: remove unused mac::status field igor.mitsyanko.os
2017-08-29 15:47   ` Sergey Matyukevich
2017-08-25  2:30 ` [PATCH 16/27] qtnfmac: stop using private driver info about current channel igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 17/27] qtnfmac: do not report channel changes until wiphy is registered igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 18/27] qtnfmac: use per-band HT/VHT info from wireless device igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 19/27] qtnfmac: initialize HT/VHT caps "can override" masks igor.mitsyanko.os
2017-08-25  2:30 ` igor.mitsyanko.os [this message]
2017-08-25  2:30 ` [PATCH 21/27] qtnfmac: extend "IE set" TLV to include frame type info igor.mitsyanko.os
2017-08-30 12:07   ` Sergey Matyukevich
2017-08-30 12:20     ` Sergey Matyukevich
2017-08-25  2:30 ` [PATCH 22/27] qtnfmac: SCAN results: retreive frame type information from "IE set" TLV igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 23/27] qtnfmac: convert "Append IEs" command to QTN_TLV_ID_IE_SET usage igor.mitsyanko.os
2017-08-30 12:35   ` Sergey Matyukevich
2017-08-25  2:30 ` [PATCH 24/27] qtnfmac: configure and start AP interface with a single command igor.mitsyanko.os
2017-08-30 13:07   ` Sergey Matyukevich
2017-08-25  2:30 ` [PATCH 25/27] nl80211: look for HT/VHT capabilities in beacon's tail igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 26/27] qtnfmac: include HTCAP and VHTCAP into config AP command igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 27/27] qtnfmac: pass all CONNECT cmd params to wireless card for processing igor.mitsyanko.os
2017-08-30 16:16 ` [PATCH 00/27] qtnfmac: allow to configure channel, BW, HT/VHT caps Kalle Valo
2017-08-30 16:22   ` Kalle Valo
2017-08-30 16:28     ` Kalle Valo
2017-08-30 18:22       ` Igor Mitsyanko
2017-08-30 18:20   ` Igor Mitsyanko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170825023024.10565-21-igor.mitsyanko.os@quantenna.com \
    --to=igor.mitsyanko.os@quantenna.com \
    --cc=avinashp@quantenna.com \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    --cc=sergey.matyukevich.os@quantenna.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox