From: igor.mitsyanko.os@quantenna.com
To: linux-wireless@vger.kernel.org
Cc: sergey.matyukevich.os@quantenna.com, avinashp@quantenna.com,
johannes@sipsolutions.net,
Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Subject: [PATCH 22/27] qtnfmac: SCAN results: retreive frame type information from "IE set" TLV
Date: Thu, 24 Aug 2017 19:30:19 -0700 [thread overview]
Message-ID: <20170825023024.10565-23-igor.mitsyanko.os@quantenna.com> (raw)
In-Reply-To: <20170825023024.10565-1-igor.mitsyanko.os@quantenna.com>
From: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
"IE set" TLV carries the same information as
qlink_event_scan_result::frame_type. Convert the event to make use of
TLV and drop frame_type member.
While at it, make qlink_event_scan_result structure alignement-safe.
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
---
drivers/net/wireless/quantenna/qtnfmac/event.c | 25 ++++++++++++-------------
drivers/net/wireless/quantenna/qtnfmac/qlink.h | 11 ++---------
2 files changed, 14 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/quantenna/qtnfmac/event.c b/drivers/net/wireless/quantenna/qtnfmac/event.c
index c2452dc..5fb0ead 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/event.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/event.c
@@ -252,13 +252,12 @@ qtnf_event_handle_scan_results(struct qtnf_vif *vif,
struct cfg80211_bss *bss;
struct ieee80211_channel *channel;
struct wiphy *wiphy = priv_to_wiphy(vif->mac);
- enum cfg80211_bss_frame_type frame_type;
+ enum cfg80211_bss_frame_type frame_type = CFG80211_BSS_FTYPE_UNKNOWN;
size_t payload_len;
u16 tlv_type;
u16 tlv_value_len;
size_t tlv_full_len;
const struct qlink_tlv_hdr *tlv;
-
const u8 *ies = NULL;
size_t ies_len = 0;
@@ -275,17 +274,6 @@ qtnf_event_handle_scan_results(struct qtnf_vif *vif,
return -EINVAL;
}
- switch (sr->frame_type) {
- case QLINK_BSS_FTYPE_BEACON:
- frame_type = CFG80211_BSS_FTYPE_BEACON;
- break;
- case QLINK_BSS_FTYPE_PRESP:
- frame_type = CFG80211_BSS_FTYPE_PRESP;
- break;
- default:
- frame_type = CFG80211_BSS_FTYPE_UNKNOWN;
- }
-
payload_len = len - sizeof(*sr);
tlv = (struct qlink_tlv_hdr *)sr->payload;
@@ -308,6 +296,17 @@ qtnf_event_handle_scan_results(struct qtnf_vif *vif,
ie_len = tlv_value_len -
(sizeof(*ie_set) - sizeof(ie_set->hdr));
+ switch (ie_set->type) {
+ case QLINK_IE_SET_BEACON_IES:
+ frame_type = CFG80211_BSS_FTYPE_BEACON;
+ break;
+ case QLINK_IE_SET_PROBE_RESP_IES:
+ frame_type = CFG80211_BSS_FTYPE_PRESP;
+ break;
+ default:
+ frame_type = CFG80211_BSS_FTYPE_UNKNOWN;
+ }
+
if (ie_len) {
ies = ie_set->ie_data;
ies_len = ie_len;
diff --git a/drivers/net/wireless/quantenna/qtnfmac/qlink.h b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
index ecf493d..e584d2e 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/qlink.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
@@ -872,12 +872,6 @@ struct qlink_event_rxmgmt {
u8 frame_data[0];
} __packed;
-enum qlink_frame_type {
- QLINK_BSS_FTYPE_UNKNOWN,
- QLINK_BSS_FTYPE_BEACON,
- QLINK_BSS_FTYPE_PRESP,
-};
-
/**
* struct qlink_event_scan_result - data for QLINK_EVENT_SCAN_RESULTS event
*
@@ -887,7 +881,6 @@ enum qlink_frame_type {
* @capab: capabilities field.
* @bintval: beacon interval announced by discovered BSS.
* @signal: signal strength.
- * @frame_type: frame type used to get scan result, see &enum qlink_frame_type.
* @bssid: BSSID announced by discovered BSS.
* @ssid_len: length of SSID announced by BSS.
* @ssid: SSID announced by discovered BSS.
@@ -900,10 +893,10 @@ struct qlink_event_scan_result {
__le16 capab;
__le16 bintval;
s8 signal;
- u8 frame_type;
- u8 bssid[ETH_ALEN];
u8 ssid_len;
u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 bssid[ETH_ALEN];
+ u8 rsvd[2];
u8 payload[0];
} __packed;
--
2.9.5
next prev parent reply other threads:[~2017-08-25 2:31 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-25 2:29 [PATCH 00/27] qtnfmac: allow to configure channel, BW, HT/VHT caps igor.mitsyanko.os
2017-08-25 2:29 ` [PATCH 01/27] qtnfmac: qlink: convert channel width from bitfiled to simple enum igor.mitsyanko.os
2017-08-25 2:29 ` [PATCH 02/27] qtnfmac: make "Channel change" event report full channel info igor.mitsyanko.os
2017-08-29 14:31 ` Sergey Matyukevich
2017-08-30 1:45 ` Igor Mitsyanko
2017-08-25 2:30 ` [PATCH 03/27] qtnfmac: retreive current channel info from EP igor.mitsyanko.os
2017-08-29 14:42 ` Sergey Matyukevich
2017-08-30 1:39 ` Igor Mitsyanko
2017-08-25 2:30 ` [PATCH 04/27] qtnfmac: do not cache AP settings in driver structures igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 05/27] qtnfmac: pass all AP settings to wireless card for processing igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 06/27] qtnfmac: pass full channel definition to device on start_ap command igor.mitsyanko.os
2017-08-30 14:02 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 07/27] qtnfmac: get rid of QTNF_STATE_AP_CONFIG igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 08/27] qtnfmac: get rid of QTNF_STATE_AP_START usage igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 09/27] qtnfmac: do not cache BSS state in per-VIF structure igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 10/27] qtnfmac: do not cache channel info from "connect" command igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 11/27] qtnfmac: make encryption info a part of " igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 12/27] qtnfmac: let wifi card handle channel switch request to the same chan igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 13/27] qtnfmac: pass VIF info to SendChannel command igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 14/27] qtnfmac: do not cache CSA chandef info igor.mitsyanko.os
2017-08-29 15:44 ` Sergey Matyukevich
2017-08-30 1:48 ` Igor Mitsyanko
2017-08-30 8:05 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 15/27] qtnfmac: remove unused mac::status field igor.mitsyanko.os
2017-08-29 15:47 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 16/27] qtnfmac: stop using private driver info about current channel igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 17/27] qtnfmac: do not report channel changes until wiphy is registered igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 18/27] qtnfmac: use per-band HT/VHT info from wireless device igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 19/27] qtnfmac: initialize HT/VHT caps "can override" masks igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 20/27] qtnfmac: get rid of PHYMODE capabilities flags igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 21/27] qtnfmac: extend "IE set" TLV to include frame type info igor.mitsyanko.os
2017-08-30 12:07 ` Sergey Matyukevich
2017-08-30 12:20 ` Sergey Matyukevich
2017-08-25 2:30 ` igor.mitsyanko.os [this message]
2017-08-25 2:30 ` [PATCH 23/27] qtnfmac: convert "Append IEs" command to QTN_TLV_ID_IE_SET usage igor.mitsyanko.os
2017-08-30 12:35 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 24/27] qtnfmac: configure and start AP interface with a single command igor.mitsyanko.os
2017-08-30 13:07 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 25/27] nl80211: look for HT/VHT capabilities in beacon's tail igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 26/27] qtnfmac: include HTCAP and VHTCAP into config AP command igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 27/27] qtnfmac: pass all CONNECT cmd params to wireless card for processing igor.mitsyanko.os
2017-08-30 16:16 ` [PATCH 00/27] qtnfmac: allow to configure channel, BW, HT/VHT caps Kalle Valo
2017-08-30 16:22 ` Kalle Valo
2017-08-30 16:28 ` Kalle Valo
2017-08-30 18:22 ` Igor Mitsyanko
2017-08-30 18:20 ` Igor Mitsyanko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170825023024.10565-23-igor.mitsyanko.os@quantenna.com \
--to=igor.mitsyanko.os@quantenna.com \
--cc=avinashp@quantenna.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=sergey.matyukevich.os@quantenna.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox