Linux wireless drivers development
 help / color / mirror / Atom feed
From: igor.mitsyanko.os@quantenna.com
To: linux-wireless@vger.kernel.org
Cc: sergey.matyukevich.os@quantenna.com, avinashp@quantenna.com,
	johannes@sipsolutions.net,
	Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Subject: [PATCH 23/27] qtnfmac: convert "Append IEs" command to QTN_TLV_ID_IE_SET usage
Date: Thu, 24 Aug 2017 19:30:20 -0700	[thread overview]
Message-ID: <20170825023024.10565-24-igor.mitsyanko.os@quantenna.com> (raw)
In-Reply-To: <20170825023024.10565-1-igor.mitsyanko.os@quantenna.com>

From: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>

Data contained within "Append IEs" command (QLINK_CMD_MGMT_SET_APPIE)
duplicates QTN_TLV_ID_IE_SET TLV. Conver the command to use that TLV
instead.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
---
 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c | 12 ++++++------
 drivers/net/wireless/quantenna/qtnfmac/commands.c | 17 ++++-------------
 drivers/net/wireless/quantenna/qtnfmac/qlink.h    | 15 ---------------
 3 files changed, 10 insertions(+), 34 deletions(-)

diff --git a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
index 3faac7a..2497493 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
@@ -212,10 +212,10 @@ static int qtnf_mgmt_set_appie(struct qtnf_vif *vif,
 	int ret = 0;
 
 	if (!info->beacon_ies || !info->beacon_ies_len) {
-		ret = qtnf_cmd_send_mgmt_set_appie(vif, QLINK_MGMT_FRAME_BEACON,
+		ret = qtnf_cmd_send_mgmt_set_appie(vif, QLINK_IE_SET_BEACON_IES,
 						   NULL, 0);
 	} else {
-		ret = qtnf_cmd_send_mgmt_set_appie(vif, QLINK_MGMT_FRAME_BEACON,
+		ret = qtnf_cmd_send_mgmt_set_appie(vif, QLINK_IE_SET_BEACON_IES,
 						   info->beacon_ies,
 						   info->beacon_ies_len);
 	}
@@ -225,11 +225,11 @@ static int qtnf_mgmt_set_appie(struct qtnf_vif *vif,
 
 	if (!info->proberesp_ies || !info->proberesp_ies_len) {
 		ret = qtnf_cmd_send_mgmt_set_appie(vif,
-						   QLINK_MGMT_FRAME_PROBE_RESP,
+						   QLINK_IE_SET_PROBE_RESP_IES,
 						   NULL, 0);
 	} else {
 		ret = qtnf_cmd_send_mgmt_set_appie(vif,
-						   QLINK_MGMT_FRAME_PROBE_RESP,
+						   QLINK_IE_SET_PROBE_RESP_IES,
 						   info->proberesp_ies,
 						   info->proberesp_ies_len);
 	}
@@ -239,11 +239,11 @@ static int qtnf_mgmt_set_appie(struct qtnf_vif *vif,
 
 	if (!info->assocresp_ies || !info->assocresp_ies_len) {
 		ret = qtnf_cmd_send_mgmt_set_appie(vif,
-						   QLINK_MGMT_FRAME_ASSOC_RESP,
+						   QLINK_IE_SET_ASSOC_RESP,
 						   NULL, 0);
 	} else {
 		ret = qtnf_cmd_send_mgmt_set_appie(vif,
-						   QLINK_MGMT_FRAME_ASSOC_RESP,
+						   QLINK_IE_SET_ASSOC_RESP,
 						   info->assocresp_ies,
 						   info->assocresp_ies_len);
 	}
diff --git a/drivers/net/wireless/quantenna/qtnfmac/commands.c b/drivers/net/wireless/quantenna/qtnfmac/commands.c
index cc37114..2e30c26 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/commands.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/commands.c
@@ -394,11 +394,10 @@ int qtnf_cmd_send_mgmt_set_appie(struct qtnf_vif *vif, u8 frame_type,
 				 const u8 *buf, size_t len)
 {
 	struct sk_buff *cmd_skb;
-	struct qlink_cmd_mgmt_append_ie *cmd;
 	u16 res_code = QLINK_CMD_RESULT_OK;
 	int ret;
 
-	if (sizeof(*cmd) + len > QTNF_MAX_CMD_BUF_SIZE) {
+	if (len > QTNF_MAX_CMD_BUF_SIZE) {
 		pr_warn("VIF%u.%u: %u frame is too big: %zu\n", vif->mac->macid,
 			vif->vifid, frame_type, len);
 		return -E2BIG;
@@ -406,21 +405,13 @@ int qtnf_cmd_send_mgmt_set_appie(struct qtnf_vif *vif, u8 frame_type,
 
 	cmd_skb = qtnf_cmd_alloc_new_cmdskb(vif->mac->macid, vif->vifid,
 					    QLINK_CMD_MGMT_SET_APPIE,
-					    sizeof(*cmd));
+					    sizeof(struct qlink_cmd));
 	if (unlikely(!cmd_skb))
 		return -ENOMEM;
 
-	qtnf_bus_lock(vif->mac->bus);
-
-	cmd = (struct qlink_cmd_mgmt_append_ie *)cmd_skb->data;
-	cmd->type = frame_type;
-	cmd->flags = 0;
+	qtnf_cmd_tlv_ie_set_add(cmd_skb, frame_type, buf, len);
 
-	/* If len == 0 then IE buf for specified frame type
-	 * should be cleared on EP.
-	 */
-	if (len && buf)
-		qtnf_cmd_skb_put_buffer(cmd_skb, buf, len);
+	qtnf_bus_lock(vif->mac->bus);
 
 	ret = qtnf_cmd_send(vif->mac->bus, cmd_skb, &res_code);
 
diff --git a/drivers/net/wireless/quantenna/qtnfmac/qlink.h b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
index e584d2e..eba73fd 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/qlink.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
@@ -290,21 +290,6 @@ struct qlink_cmd_mgmt_frame_tx {
 } __packed;
 
 /**
- * struct qlink_cmd_mgmt_append_ie - data for QLINK_CMD_MGMT_SET_APPIE command
- *
- * @type: type of MGMT frame to appent requested IEs to, one of
- *	&enum qlink_mgmt_frame_type.
- * @flags: for future use.
- * @ie_data: IEs data to append.
- */
-struct qlink_cmd_mgmt_append_ie {
-	struct qlink_cmd chdr;
-	u8 type;
-	u8 flags;
-	u8 ie_data[0];
-} __packed;
-
-/**
  * struct qlink_cmd_get_sta_info - data for QLINK_CMD_GET_STA_INFO command
  *
  * @sta_addr: MAC address of the STA statistics is requested for.
-- 
2.9.5

  parent reply	other threads:[~2017-08-25  2:31 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-25  2:29 [PATCH 00/27] qtnfmac: allow to configure channel, BW, HT/VHT caps igor.mitsyanko.os
2017-08-25  2:29 ` [PATCH 01/27] qtnfmac: qlink: convert channel width from bitfiled to simple enum igor.mitsyanko.os
2017-08-25  2:29 ` [PATCH 02/27] qtnfmac: make "Channel change" event report full channel info igor.mitsyanko.os
2017-08-29 14:31   ` Sergey Matyukevich
2017-08-30  1:45     ` Igor Mitsyanko
2017-08-25  2:30 ` [PATCH 03/27] qtnfmac: retreive current channel info from EP igor.mitsyanko.os
2017-08-29 14:42   ` Sergey Matyukevich
2017-08-30  1:39     ` Igor Mitsyanko
2017-08-25  2:30 ` [PATCH 04/27] qtnfmac: do not cache AP settings in driver structures igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 05/27] qtnfmac: pass all AP settings to wireless card for processing igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 06/27] qtnfmac: pass full channel definition to device on start_ap command igor.mitsyanko.os
2017-08-30 14:02   ` Sergey Matyukevich
2017-08-25  2:30 ` [PATCH 07/27] qtnfmac: get rid of QTNF_STATE_AP_CONFIG igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 08/27] qtnfmac: get rid of QTNF_STATE_AP_START usage igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 09/27] qtnfmac: do not cache BSS state in per-VIF structure igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 10/27] qtnfmac: do not cache channel info from "connect" command igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 11/27] qtnfmac: make encryption info a part of " igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 12/27] qtnfmac: let wifi card handle channel switch request to the same chan igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 13/27] qtnfmac: pass VIF info to SendChannel command igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 14/27] qtnfmac: do not cache CSA chandef info igor.mitsyanko.os
2017-08-29 15:44   ` Sergey Matyukevich
2017-08-30  1:48     ` Igor Mitsyanko
2017-08-30  8:05       ` Sergey Matyukevich
2017-08-25  2:30 ` [PATCH 15/27] qtnfmac: remove unused mac::status field igor.mitsyanko.os
2017-08-29 15:47   ` Sergey Matyukevich
2017-08-25  2:30 ` [PATCH 16/27] qtnfmac: stop using private driver info about current channel igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 17/27] qtnfmac: do not report channel changes until wiphy is registered igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 18/27] qtnfmac: use per-band HT/VHT info from wireless device igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 19/27] qtnfmac: initialize HT/VHT caps "can override" masks igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 20/27] qtnfmac: get rid of PHYMODE capabilities flags igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 21/27] qtnfmac: extend "IE set" TLV to include frame type info igor.mitsyanko.os
2017-08-30 12:07   ` Sergey Matyukevich
2017-08-30 12:20     ` Sergey Matyukevich
2017-08-25  2:30 ` [PATCH 22/27] qtnfmac: SCAN results: retreive frame type information from "IE set" TLV igor.mitsyanko.os
2017-08-25  2:30 ` igor.mitsyanko.os [this message]
2017-08-30 12:35   ` [PATCH 23/27] qtnfmac: convert "Append IEs" command to QTN_TLV_ID_IE_SET usage Sergey Matyukevich
2017-08-25  2:30 ` [PATCH 24/27] qtnfmac: configure and start AP interface with a single command igor.mitsyanko.os
2017-08-30 13:07   ` Sergey Matyukevich
2017-08-25  2:30 ` [PATCH 25/27] nl80211: look for HT/VHT capabilities in beacon's tail igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 26/27] qtnfmac: include HTCAP and VHTCAP into config AP command igor.mitsyanko.os
2017-08-25  2:30 ` [PATCH 27/27] qtnfmac: pass all CONNECT cmd params to wireless card for processing igor.mitsyanko.os
2017-08-30 16:16 ` [PATCH 00/27] qtnfmac: allow to configure channel, BW, HT/VHT caps Kalle Valo
2017-08-30 16:22   ` Kalle Valo
2017-08-30 16:28     ` Kalle Valo
2017-08-30 18:22       ` Igor Mitsyanko
2017-08-30 18:20   ` Igor Mitsyanko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170825023024.10565-24-igor.mitsyanko.os@quantenna.com \
    --to=igor.mitsyanko.os@quantenna.com \
    --cc=avinashp@quantenna.com \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    --cc=sergey.matyukevich.os@quantenna.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox