From: igor.mitsyanko.os@quantenna.com
To: linux-wireless@vger.kernel.org
Cc: sergey.matyukevich.os@quantenna.com, avinashp@quantenna.com,
johannes@sipsolutions.net,
Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>,
Igor Mitsyanko <igor.mitsyanko@quantenna.com>
Subject: [PATCH 03/27] qtnfmac: retreive current channel info from EP
Date: Thu, 24 Aug 2017 19:30:00 -0700 [thread overview]
Message-ID: <20170825023024.10565-4-igor.mitsyanko.os@quantenna.com> (raw)
In-Reply-To: <20170825023024.10565-1-igor.mitsyanko.os@quantenna.com>
From: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Do not try to cache current operational channel info in driver, this
is a potential source of synchronization issues + driver does not
really need that info.
Introduce GET_CHANNEL command and process it appropriately.
Signed-off-by: Igor Mitsyanko <igor.mitsyanko@quantenna.com>
---
drivers/net/wireless/quantenna/qtnfmac/cfg80211.c | 34 ++++++++------------
drivers/net/wireless/quantenna/qtnfmac/commands.c | 38 +++++++++++++++++++++++
drivers/net/wireless/quantenna/qtnfmac/commands.h | 1 +
drivers/net/wireless/quantenna/qtnfmac/qlink.h | 11 +++++++
4 files changed, 63 insertions(+), 21 deletions(-)
diff --git a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
index 856fa6e..8bfe61d 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
@@ -793,37 +793,29 @@ qtnf_get_channel(struct wiphy *wiphy, struct wireless_dev *wdev,
struct qtnf_wmac *mac = wiphy_priv(wiphy);
struct net_device *ndev = wdev->netdev;
struct qtnf_vif *vif;
+ int ret;
if (!ndev)
return -ENODEV;
vif = qtnf_netdev_get_priv(wdev->netdev);
- switch (vif->wdev.iftype) {
- case NL80211_IFTYPE_STATION:
- if (vif->sta_state == QTNF_STA_DISCONNECTED) {
- pr_warn("%s: STA disconnected\n", ndev->name);
- return -ENODATA;
- }
- break;
- case NL80211_IFTYPE_AP:
- if (!(vif->bss_status & QTNF_STATE_AP_START)) {
- pr_warn("%s: AP not started\n", ndev->name);
- return -ENODATA;
- }
- break;
- default:
- pr_err("unsupported vif type (%d)\n", vif->wdev.iftype);
- return -ENODATA;
+ ret = qtnf_cmd_get_channel(vif, chandef);
+ if (ret) {
+ pr_err("%s: failed to get channel: %d\n", ndev->name, ret);
+ goto out;
}
- if (!cfg80211_chandef_valid(&mac->chandef)) {
- pr_err("invalid channel settings on %s\n", ndev->name);
- return -ENODATA;
+ if (!cfg80211_chandef_valid(chandef)) {
+ pr_err("%s: bad chan freq1=%u bw=%u\n", ndev->name,
+ chandef->center_freq1, chandef->width);
+ ret = -ENODATA;
}
- memcpy(chandef, &mac->chandef, sizeof(*chandef));
- return 0;
+ memcpy(&mac->chandef, chandef, sizeof(mac->chandef));
+
+out:
+ return ret;
}
static int qtnf_channel_switch(struct wiphy *wiphy, struct net_device *dev,
diff --git a/drivers/net/wireless/quantenna/qtnfmac/commands.c b/drivers/net/wireless/quantenna/qtnfmac/commands.c
index 4206886..806b88b 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/commands.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/commands.c
@@ -2358,3 +2358,41 @@ int qtnf_cmd_send_chan_switch(struct qtnf_wmac *mac,
qtnf_bus_unlock(mac->bus);
return ret;
}
+
+int qtnf_cmd_get_channel(struct qtnf_vif *vif, struct cfg80211_chan_def *chdef)
+{
+ struct qtnf_bus *bus = vif->mac->bus;
+ const struct qlink_resp_channel_get *resp;
+ struct sk_buff *cmd_skb;
+ struct sk_buff *resp_skb = NULL;
+ u16 res_code = QLINK_CMD_RESULT_OK;
+ int ret;
+
+ cmd_skb = qtnf_cmd_alloc_new_cmdskb(vif->mac->macid, vif->vifid,
+ QLINK_CMD_CHAN_GET,
+ sizeof(struct qlink_cmd));
+ if (unlikely(!cmd_skb))
+ return -ENOMEM;
+
+ qtnf_bus_lock(bus);
+
+ ret = qtnf_cmd_send_with_reply(bus, cmd_skb, &resp_skb, &res_code,
+ sizeof(*resp), NULL);
+
+ qtnf_bus_unlock(bus);
+
+ if (unlikely(ret))
+ goto out;
+
+ if (unlikely(res_code != QLINK_CMD_RESULT_OK)) {
+ ret = -ENODATA;
+ goto out;
+ }
+
+ resp = (const struct qlink_resp_channel_get *)resp_skb->data;
+ qlink_chandef_q2cfg(priv_to_wiphy(vif->mac), &resp->chan, chdef);
+
+out:
+ consume_skb(resp_skb);
+ return ret;
+}
diff --git a/drivers/net/wireless/quantenna/qtnfmac/commands.h b/drivers/net/wireless/quantenna/qtnfmac/commands.h
index 783b203..e1bcb83 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/commands.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/commands.h
@@ -75,5 +75,6 @@ int qtnf_cmd_get_chan_stats(struct qtnf_wmac *mac, u16 channel,
struct qtnf_chan_stats *stats);
int qtnf_cmd_send_chan_switch(struct qtnf_wmac *mac,
struct cfg80211_csa_settings *params);
+int qtnf_cmd_get_channel(struct qtnf_vif *vif, struct cfg80211_chan_def *chdef);
#endif /* QLINK_COMMANDS_H_ */
diff --git a/drivers/net/wireless/quantenna/qtnfmac/qlink.h b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
index 5936854..fb88f3e 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/qlink.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
@@ -169,6 +169,7 @@ enum qlink_cmd_type {
QLINK_CMD_REG_NOTIFY = 0x0019,
QLINK_CMD_CHANS_INFO_GET = 0x001A,
QLINK_CMD_CHAN_SWITCH = 0x001B,
+ QLINK_CMD_CHAN_GET = 0x001C,
QLINK_CMD_CONFIG_AP = 0x0020,
QLINK_CMD_START_AP = 0x0021,
QLINK_CMD_STOP_AP = 0x0022,
@@ -694,6 +695,16 @@ struct qlink_resp_get_chan_stats {
u8 info[0];
} __packed;
+/**
+ * struct qlink_resp_channel_get - response for QLINK_CMD_CHAN_GET command
+ *
+ * @chan: definition of current operating channel.
+ */
+struct qlink_resp_channel_get {
+ struct qlink_resp rhdr;
+ struct qlink_chandef chan;
+} __packed;
+
/* QLINK Events messages related definitions
*/
--
2.9.5
next prev parent reply other threads:[~2017-08-25 2:30 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-25 2:29 [PATCH 00/27] qtnfmac: allow to configure channel, BW, HT/VHT caps igor.mitsyanko.os
2017-08-25 2:29 ` [PATCH 01/27] qtnfmac: qlink: convert channel width from bitfiled to simple enum igor.mitsyanko.os
2017-08-25 2:29 ` [PATCH 02/27] qtnfmac: make "Channel change" event report full channel info igor.mitsyanko.os
2017-08-29 14:31 ` Sergey Matyukevich
2017-08-30 1:45 ` Igor Mitsyanko
2017-08-25 2:30 ` igor.mitsyanko.os [this message]
2017-08-29 14:42 ` [PATCH 03/27] qtnfmac: retreive current channel info from EP Sergey Matyukevich
2017-08-30 1:39 ` Igor Mitsyanko
2017-08-25 2:30 ` [PATCH 04/27] qtnfmac: do not cache AP settings in driver structures igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 05/27] qtnfmac: pass all AP settings to wireless card for processing igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 06/27] qtnfmac: pass full channel definition to device on start_ap command igor.mitsyanko.os
2017-08-30 14:02 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 07/27] qtnfmac: get rid of QTNF_STATE_AP_CONFIG igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 08/27] qtnfmac: get rid of QTNF_STATE_AP_START usage igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 09/27] qtnfmac: do not cache BSS state in per-VIF structure igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 10/27] qtnfmac: do not cache channel info from "connect" command igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 11/27] qtnfmac: make encryption info a part of " igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 12/27] qtnfmac: let wifi card handle channel switch request to the same chan igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 13/27] qtnfmac: pass VIF info to SendChannel command igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 14/27] qtnfmac: do not cache CSA chandef info igor.mitsyanko.os
2017-08-29 15:44 ` Sergey Matyukevich
2017-08-30 1:48 ` Igor Mitsyanko
2017-08-30 8:05 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 15/27] qtnfmac: remove unused mac::status field igor.mitsyanko.os
2017-08-29 15:47 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 16/27] qtnfmac: stop using private driver info about current channel igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 17/27] qtnfmac: do not report channel changes until wiphy is registered igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 18/27] qtnfmac: use per-band HT/VHT info from wireless device igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 19/27] qtnfmac: initialize HT/VHT caps "can override" masks igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 20/27] qtnfmac: get rid of PHYMODE capabilities flags igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 21/27] qtnfmac: extend "IE set" TLV to include frame type info igor.mitsyanko.os
2017-08-30 12:07 ` Sergey Matyukevich
2017-08-30 12:20 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 22/27] qtnfmac: SCAN results: retreive frame type information from "IE set" TLV igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 23/27] qtnfmac: convert "Append IEs" command to QTN_TLV_ID_IE_SET usage igor.mitsyanko.os
2017-08-30 12:35 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 24/27] qtnfmac: configure and start AP interface with a single command igor.mitsyanko.os
2017-08-30 13:07 ` Sergey Matyukevich
2017-08-25 2:30 ` [PATCH 25/27] nl80211: look for HT/VHT capabilities in beacon's tail igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 26/27] qtnfmac: include HTCAP and VHTCAP into config AP command igor.mitsyanko.os
2017-08-25 2:30 ` [PATCH 27/27] qtnfmac: pass all CONNECT cmd params to wireless card for processing igor.mitsyanko.os
2017-08-30 16:16 ` [PATCH 00/27] qtnfmac: allow to configure channel, BW, HT/VHT caps Kalle Valo
2017-08-30 16:22 ` Kalle Valo
2017-08-30 16:28 ` Kalle Valo
2017-08-30 18:22 ` Igor Mitsyanko
2017-08-30 18:20 ` Igor Mitsyanko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170825023024.10565-4-igor.mitsyanko.os@quantenna.com \
--to=igor.mitsyanko.os@quantenna.com \
--cc=avinashp@quantenna.com \
--cc=igor.mitsyanko@quantenna.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=sergey.matyukevich.os@quantenna.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox