Re: 2.6.15-mm4 failure on power5

[Michael Ellerman <michael@ellerman.id.au>]

[-- Attachment #1: Type: text/plain, Size: 1661 bytes --]

On Wed, 18 Jan 2006 01:00, Ingo Molnar wrote:
> * Michael Ellerman <michael@ellerman.id.au> wrote:
> > On Tue, 17 Jan 2006 08:52, Dave C Boutcher wrote:
> > > 2.6.15-mm4 won't boot on my power5 either.  I tracked it down to the
> > > following mutex patch from Ingo: kernel-kernel-cpuc-to-mutexes.patch
> > >
> > > If I revert just that patch, mm4 boots fine.  Its really not obvious to
> > > me at all why that patch is breaking things though...
> >
> > My POWER5 (gr) LPAR seems to boot ok (3 times so far) with that patch,
> > guess it's something subtle. That's with CONFIG_DEBUG_MUTEXES=y. And
> > it's just booted once with CONFIG_DEBUG_MUTEXES=n.
> >
> > And now it's booted the full mm4 patch set without blinking.
>
> so it booted fine with CONFIG_DEBUG_MUTEXES=n but with that patch not
> applied?
>
> the patch will likely work around the bug, so DEBUG_MUTEXES=y/n should
> make no difference with that patch applied.

It booted fine _with_ the patch applied, with DEBUG_MUTEXES=y and n.

Boutcher, to be clear, you can't boot with kernel-kernel-cpuc-to-mutexes.patch 
applied and DEBUG_MUTEXES=y ?

But if you revert kernel-kernel-cpuc-to-mutexes.patch it boots ok?

This is looking quite similar to another hang we're seeing on Power4 iSeries 
on mainline git:
http://ozlabs.org/pipermail/linuxppc64-dev/2006-January/007679.html

cheers

-- 
Michael Ellerman
IBM OzLabs

email: michael:ellerman.id.au
inmsg: mpe:jabber.org
wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)

We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]