* linux-next: Signed-off-by missing for commits in the net tree
From: Stephen Rothwell @ 2018-09-30 1:04 UTC (permalink / raw)
To: David Miller, Networking
Cc: Linux-Next Mailing List, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 256 bytes --]
Hi all,
Commits
5f672090e44f ("qed: Fix shmem structure inconsistency between driver and the mfw.")
ce7d17d6c607 ("MAINTAINERS: change bridge maintainers")
are missing a Signed-off-by from their committers.
--
Cheers,
Stephen Rothwell
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply
* Re: [PATCH net-next] tls: Remove redundant vars from tls record structure
From: David Miller @ 2018-09-29 18:41 UTC (permalink / raw)
To: vakul.garg; +Cc: netdev, borisp, aviadye, davejwatson, doronrk
In-Reply-To: <20180926105208.18515-1-vakul.garg@nxp.com>
From: Vakul Garg <vakul.garg@nxp.com>
Date: Wed, 26 Sep 2018 16:22:08 +0530
> Structure 'tls_rec' contains sg_aead_in and sg_aead_out which point
> to a aad_space and then chain scatterlists sg_plaintext_data,
> sg_encrypted_data respectively. Rather than using chained scatterlists
> for plaintext and encrypted data in aead_req, it is efficient to store
> aad_space in sg_encrypted_data and sg_plaintext_data itself in the
> first index and get rid of sg_aead_in, sg_aead_in and further chaining.
>
> This requires increasing size of sg_encrypted_data & sg_plaintext_data
> arrarys by 1 to accommodate entry for aad_space. The code which uses
> sg_encrypted_data and sg_plaintext_data has been modified to skip first
> index as it points to aad_space.
>
> Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Applied, thanks.
^ permalink raw reply
* Re: [PATCH] [PATCH net-next] openvswitch: Use correct reply values in datapath and vport ops
From: David Miller @ 2018-09-29 18:44 UTC (permalink / raw)
To: pkusunyifeng; +Cc: netdev
In-Reply-To: <1537987214-6414-1-git-send-email-pkusunyifeng@gmail.com>
From: Yifeng Sun <pkusunyifeng@gmail.com>
Date: Wed, 26 Sep 2018 11:40:14 -0700
> This patch fixes the bug that all datapath and vport ops are returning
> wrong values (OVS_FLOW_CMD_NEW or OVS_DP_CMD_NEW) in their replies.
>
> Signed-off-by: Yifeng Sun <pkusunyifeng@gmail.com>
Applied.
^ permalink raw reply
* Re: [net 1/1] tipc: fix failover problem
From: David Miller @ 2018-09-29 18:46 UTC (permalink / raw)
To: jon.maloy
Cc: netdev, gordan.mihaljevic, tung.q.nguyen, hoang.h.le, canh.d.luu,
ying.xue, tipc-discussion
In-Reply-To: <1537988454-4210-1-git-send-email-jon.maloy@ericsson.com>
From: Jon Maloy <jon.maloy@ericsson.com>
Date: Wed, 26 Sep 2018 21:00:54 +0200
> From: LUU Duc Canh <canh.d.luu@dektech.com.au>
>
> We see the following scenario:
> 1) Link endpoint B on node 1 discovers that its peer endpoint is gone.
> Since there is a second working link, failover procedure is started.
> 2) Link endpoint A on node 1 sends a FAILOVER message to peer endpoint
> A on node 2. The node item 1->2 goes to state FAILINGOVER.
> 3) Linke endpoint A/2 receives the failover, and is supposed to take
> down its parallell link endpoint B/2, while producing a FAILOVER
> message to send back to A/1.
> 4) However, B/2 has already been deleted, so no FAILOVER message can
> created.
> 5) Node 1->2 remains in state FAILINGOVER forever, refusing to receive
> any messages that can bring B/1 up again. We are left with a non-
> redundant link between node 1 and 2.
>
> We fix this with letting endpoint A/2 build a dummy FAILOVER message
> to send to back to A/1, so that the situation can be resolved.
>
> Signed-off-by: LUU Duc Canh <canh.d.luu@dektech.com.au>
> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Applied.
^ permalink raw reply
* Re: [PATCH net 1/1] qlcnic: fix Tx descriptor corruption on 82xx devices
From: David Miller @ 2018-09-29 18:47 UTC (permalink / raw)
To: shahed.shaikh; +Cc: netdev, Manish.Chopra, Dept-GELinuxNICDev
In-Reply-To: <20180926194110.28043-1-shahed.shaikh@cavium.com>
From: Shahed Shaikh <shahed.shaikh@cavium.com>
Date: Wed, 26 Sep 2018 12:41:10 -0700
> In regular NIC transmission flow, driver always configures MAC using
> Tx queue zero descriptor as a part of MAC learning flow.
> But with multi Tx queue supported NIC, regular transmission can occur on
> any non-zero Tx queue and from that context it uses
> Tx queue zero descriptor to configure MAC, at the same time TX queue
> zero could be used by another CPU for regular transmission
> which could lead to Tx queue zero descriptor corruption and cause FW
> abort.
>
> This patch fixes this in such a way that driver always configures
> learned MAC address from the same Tx queue which is used for
> regular transmission.
>
> Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism")
> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Applied and queued up for -stable.
^ permalink raw reply
* Re: [PATCH] r8169: Disable clk during suspend / resume
From: David Miller @ 2018-09-29 18:49 UTC (permalink / raw)
To: hdegoede; +Cc: nic_swsd, netdev
In-Reply-To: <20180926201239.28517-1-hdegoede@redhat.com>
From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 26 Sep 2018 22:12:39 +0200
> Disable the clk during suspend to save power. Note that tp->clk may be
> NULL, the clk core functions handle this without problems.
>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Tested-by: Carlo Caione <carlo@endlessm.com>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Applied.
^ permalink raw reply
* Re: [PATCH] netlink: fix typo in nla_parse_nested() comment
From: David Miller @ 2018-09-29 18:49 UTC (permalink / raw)
To: johannes; +Cc: netdev, johannes.berg
In-Reply-To: <20180926201942.5932-1-johannes@sipsolutions.net>
From: Johannes Berg <johannes@sipsolutions.net>
Date: Wed, 26 Sep 2018 22:19:42 +0200
> From: Johannes Berg <johannes.berg@intel.com>
>
> Fix a simple typo: attribuets -> attributes
>
> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Applied.
^ permalink raw reply
* [PATCH net] r8169: always autoneg on resume
From: Alex Xu (Hello71) @ 2018-09-30 1:18 UTC (permalink / raw)
To: linux-netdev; +Cc: hkallweit1, nic_swsd, davem, linux-kernel
This affects at least versions 25 and 33, so assume all cards are broken
and just renegotiate by default.
Fixes: a2965f12fde6 ("r8169: remove rtl8169_set_speed_xmii")
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
---
drivers/net/ethernet/realtek/r8169.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index ab30aaeac6d3..db2f347c1463 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -4072,13 +4072,12 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
genphy_soft_reset(dev->phydev);
- /* It was reported that chip version 33 ends up with 10MBit/Half on a
+ /* It was reported that several chips end up with 10MBit/Half on a
* 1GBit link after resuming from S3. For whatever reason the PHY on
- * this chip doesn't properly start a renegotiation when soft-reset.
+ * these chips doesn't properly start a renegotiation when soft-reset.
* Explicitly requesting a renegotiation fixes this.
*/
- if (tp->mac_version == RTL_GIGA_MAC_VER_33 &&
- dev->phydev->autoneg == AUTONEG_ENABLE)
+ if (dev->phydev->autoneg == AUTONEG_ENABLE)
phy_restart_aneg(dev->phydev);
}
--
2.19.0
^ permalink raw reply related
* Re: [PATCH net-next] net: caif: fix return type of ndo_start_xmit function
From: YueHaibing @ 2018-09-30 1:52 UTC (permalink / raw)
To: David Miller; +Cc: dmitry.tarnyagin, linux-kernel, netdev
In-Reply-To: <20180929.113802.1016843680571572182.davem@davemloft.net>
On 2018/9/30 2:38, David Miller wrote:
> From: YueHaibing <yuehaibing@huawei.com>
> Date: Wed, 26 Sep 2018 17:27:05 +0800
>
>> @@ -1014,7 +1014,7 @@ static int cfhsi_xmit(struct sk_buff *skb, struct net_device *dev)
>> int prio;
>>
>> if (!dev)
>> - return -EINVAL;
>> + return NETDEV_TX_BUSY;
>>
>> cfhsi = netdev_priv(dev);
>>
>
> Even though the return type of ndo_start_xmit is netdev_tx_t, negative error codes are
> still allowed I believe.
I missed this and do the wrong thing.
>
> Look, reviewing these are pretty stressful for me, because you aren't documenting your
> changes and in many cases the transformations look incorrect.
>
I'm really sorry for this.
> I'm tossing the rest of your changes in this area for now, sorry.
>
> Please double check your work and resubmit this at some time in the not-too-near
> future.
>
> Thank you.
>
> .
>
^ permalink raw reply
* [PATCH net-next] MAINTAINERS: Fix wrong include file path
From: Andrew Lunn @ 2018-09-29 19:57 UTC (permalink / raw)
To: David Miller; +Cc: netdev, Andrew Lunn
Fix the patch for the mv88e6xxx.h header file in MAINTAINERS
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 15565de091af..12d1da4a9653 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8753,7 +8753,7 @@ M: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/dsa/mv88e6xxx/
-F: linux/platform_data/mv88e6xxx.h
+F: include/linux/platform_data/mv88e6xxx.h
F: Documentation/devicetree/bindings/net/dsa/marvell.txt
MARVELL ARMADA DRM SUPPORT
--
2.19.0.rc1
^ permalink raw reply related
* Re: [PATCH net-next v6 07/23] zinc: ChaCha20 ARM and ARM64 implementations
From: Jason A. Donenfeld @ 2018-09-30 2:33 UTC (permalink / raw)
To: Ard Biesheuvel
Cc: Jean-Philippe Aumasson, Netdev, LKML, Russell King - ARM Linux,
Samuel Neves, Linux Crypto Mailing List, Andrew Lutomirski,
Greg Kroah-Hartman, David Miller, linux-arm-kernel
In-Reply-To: <CAKv+Gu9FoFQymp2-=rUeh14CkUKON389OCE7stYCOFwKZpaCrg@mail.gmail.com>
Hi Ard,
On Sat, Sep 29, 2018 at 8:16 AM Ard Biesheuvel
<ard.biesheuvel@linaro.org> wrote:
> > You mean to say that since these nobs are def_bool y and are
> > essentially "depends on ARM", then I should just straight up use
> > CONFIG_ARM? I had thought about this, but figured this would make it
> > easier to later make these optional or have other options block them
> > need be, or even if the dependencies and requirements for having them
> > changes (for example, with UML on x86). I think doing it this way
> > gives us some flexibility later on. So if that's a compelling enough
> > reason, I'd like to keep those.
>
> Sure. But probably better to be consistent then, and stop using
> CONFIG_ARM directly in your code.
Ack.
> > The reason it was added was indeed because of:
> > https://lists.01.org/pipermail/kbuild-all/2018-September/053114.html
> > -- exactly what you suspected, ARCH_RPC. Have a better suggestion than
> > !CPU_32v3?
>
> Yes, you could just add
>
> asflags-$(CONFIG_CPU_32v3) += -march=armv4
>
> with a comment stating that we don't actually support ARMv3 but only
> use it as a code generation target for reasons unrelated to the ISA
Alright, I'll do exactly that. Though, if the rationale for this has
to do only with codegen -- with what the C compiler does -- then
shouldn't this be set globally for CONFIG_CPU_32v3? I couldn't find
any macros that test against __LINUX_ARM_ARCH__ being 3 in the
assembly, so this shouldn't be a problem I don't think. Maybe I'll
send a patch.
Jason
^ permalink raw reply
* [PATCH v2 net-next 0/8] Continue towards using linkmode in phylib
From: Andrew Lunn @ 2018-09-29 21:04 UTC (permalink / raw)
To: David Miller; +Cc: netdev, Florian Fainelli, Maxime Chevallier, Andrew Lunn
These patches contain some further cleanup and helpers, and the first
real patch towards using linkmode bitmaps in phylink.
The macro magic in the RFC version has been replaced with run time
initialisation.
Andrew Lunn (8):
net: phy: Move linkmode helpers to somewhere public
net: phy: Add phydev_warn()
net: phy: Add phydev_info()
net: phy: Add helper to convert MII ADV register to a linkmode
net: phy: Add helper for advertise to lcl value
net: phy: Add limkmode equivalents to some of the MII ethtool helpers
net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES
net: phy: Replace phy driver features u32 with link_mode bitmap
drivers/net/dsa/mt7530.c | 6 +-
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 15 +-
drivers/net/ethernet/freescale/fman/mac.c | 6 +-
drivers/net/ethernet/freescale/gianfar.c | 7 +-
.../hisilicon/hns3/hns3pf/hclge_main.c | 6 +-
drivers/net/ethernet/marvell/pxa168_eth.c | 4 +-
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 6 +-
drivers/net/ethernet/socionext/sni_ave.c | 5 +-
drivers/net/phy/aquantia.c | 12 +-
drivers/net/phy/at803x.c | 2 +-
drivers/net/phy/bcm63xx.c | 9 +-
drivers/net/phy/dp83640.c | 18 +-
drivers/net/phy/marvell.c | 4 +-
drivers/net/phy/marvell10g.c | 17 +-
drivers/net/phy/microchip.c | 33 ++--
drivers/net/phy/microchip_t1.c | 2 +-
drivers/net/phy/phy_device.c | 168 +++++++++++++++++-
drivers/net/phy/phylink.c | 27 ---
include/linux/linkmode.h | 76 ++++++++
include/linux/mii.h | 101 +++++++++++
include/linux/phy.h | 31 +++-
21 files changed, 420 insertions(+), 135 deletions(-)
create mode 100644 include/linux/linkmode.h
--
2.19.0.rc1
^ permalink raw reply
* [PATCH v2 net-next 1/8] net: phy: Move linkmode helpers to somewhere public
From: Andrew Lunn @ 2018-09-29 21:04 UTC (permalink / raw)
To: David Miller; +Cc: netdev, Florian Fainelli, Maxime Chevallier, Andrew Lunn
In-Reply-To: <1538255056-15114-1-git-send-email-andrew@lunn.ch>
phylink has some useful helpers to working with linkmode bitmaps.
Move them to there own header so other code can use them.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
v2: It was suggested to make include/linux/ethernet-phy and move
some of the header files into it. I decided to leave this until
later.
---
drivers/net/phy/phylink.c | 27 ----------------
include/linux/linkmode.h | 67 +++++++++++++++++++++++++++++++++++++++
include/linux/mii.h | 1 +
include/linux/phy.h | 1 +
4 files changed, 69 insertions(+), 27 deletions(-)
create mode 100644 include/linux/linkmode.h
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 1d01e0c625a5..b6993af5c9e4 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -68,33 +68,6 @@ struct phylink {
struct sfp_bus *sfp_bus;
};
-static inline void linkmode_zero(unsigned long *dst)
-{
- bitmap_zero(dst, __ETHTOOL_LINK_MODE_MASK_NBITS);
-}
-
-static inline void linkmode_copy(unsigned long *dst, const unsigned long *src)
-{
- bitmap_copy(dst, src, __ETHTOOL_LINK_MODE_MASK_NBITS);
-}
-
-static inline void linkmode_and(unsigned long *dst, const unsigned long *a,
- const unsigned long *b)
-{
- bitmap_and(dst, a, b, __ETHTOOL_LINK_MODE_MASK_NBITS);
-}
-
-static inline void linkmode_or(unsigned long *dst, const unsigned long *a,
- const unsigned long *b)
-{
- bitmap_or(dst, a, b, __ETHTOOL_LINK_MODE_MASK_NBITS);
-}
-
-static inline bool linkmode_empty(const unsigned long *src)
-{
- return bitmap_empty(src, __ETHTOOL_LINK_MODE_MASK_NBITS);
-}
-
/**
* phylink_set_port_modes() - set the port type modes in the ethtool mask
* @mask: ethtool link mode mask
diff --git a/include/linux/linkmode.h b/include/linux/linkmode.h
new file mode 100644
index 000000000000..014fb86c7114
--- /dev/null
+++ b/include/linux/linkmode.h
@@ -0,0 +1,67 @@
+#ifndef __LINKMODE_H
+#define __LINKMODE_H
+
+#include <linux/bitmap.h>
+#include <linux/ethtool.h>
+#include <uapi/linux/ethtool.h>
+
+static inline void linkmode_zero(unsigned long *dst)
+{
+ bitmap_zero(dst, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline void linkmode_copy(unsigned long *dst, const unsigned long *src)
+{
+ bitmap_copy(dst, src, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline void linkmode_and(unsigned long *dst, const unsigned long *a,
+ const unsigned long *b)
+{
+ bitmap_and(dst, a, b, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline void linkmode_or(unsigned long *dst, const unsigned long *a,
+ const unsigned long *b)
+{
+ bitmap_or(dst, a, b, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline bool linkmode_empty(const unsigned long *src)
+{
+ return bitmap_empty(src, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline int linkmode_andnot(unsigned long *dst, const unsigned long *src1,
+ const unsigned long *src2)
+{
+ return bitmap_andnot(dst, src1, src2, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline void linkmode_set_bit(int nr, volatile unsigned long *addr)
+{
+ __set_bit(nr, addr);
+}
+
+static inline void linkmode_clear_bit(int nr, volatile unsigned long *addr)
+{
+ __clear_bit(nr, addr);
+}
+
+static inline void linkmode_change_bit(int nr, volatile unsigned long *addr)
+{
+ __change_bit(nr, addr);
+}
+
+static inline int linkmode_test_bit(int nr, volatile unsigned long *addr)
+{
+ return test_bit(nr, addr);
+}
+
+static inline int linkmode_equal(const unsigned long *src1,
+ const unsigned long *src2)
+{
+ return bitmap_equal(src1, src2, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+#endif /* __LINKMODE_H */
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 55000ee5c6ad..567047ef0309 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -10,6 +10,7 @@
#include <linux/if.h>
+#include <linux/linkmode.h>
#include <uapi/linux/mii.h>
struct ethtool_cmd;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 192a1fa0c73b..d24cc46748e2 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -19,6 +19,7 @@
#include <linux/compiler.h>
#include <linux/spinlock.h>
#include <linux/ethtool.h>
+#include <linux/linkmode.h>
#include <linux/mdio.h>
#include <linux/mii.h>
#include <linux/module.h>
--
2.19.0.rc1
^ permalink raw reply related
* [PATCH v2 net-next 2/8] net: phy: Add phydev_warn()
From: Andrew Lunn @ 2018-09-29 21:04 UTC (permalink / raw)
To: David Miller; +Cc: netdev, Florian Fainelli, Maxime Chevallier, Andrew Lunn
In-Reply-To: <1538255056-15114-1-git-send-email-andrew@lunn.ch>
Not all new style LINK_MODE bits can be converted into old style
SUPPORTED bits. We need to warn when such a conversion is attempted.
Add a helper for this.
Convert all pr_warn() calls to phydev_warn() where possible.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
v2:
Make use of the new call.
---
drivers/net/phy/at803x.c | 2 +-
drivers/net/phy/dp83640.c | 7 ++++---
drivers/net/phy/marvell.c | 2 +-
drivers/net/phy/marvell10g.c | 6 +++---
drivers/net/phy/microchip.c | 33 +++++++++++++++++----------------
include/linux/phy.h | 3 +++
6 files changed, 29 insertions(+), 24 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 411cf1072bae..e74a047a846e 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -357,7 +357,7 @@ static int at803x_aneg_done(struct phy_device *phydev)
/* check if the SGMII link is OK. */
if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
- pr_warn("803x_aneg_done: SGMII link is not ok\n");
+ phydev_warn(phydev, "803x_aneg_done: SGMII link is not ok\n");
aneg_done = 0;
}
/* switch back to copper page */
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 29aa8d772b0c..74cf356d8171 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -553,16 +553,17 @@ static void enable_status_frames(struct phy_device *phydev, bool on)
mutex_unlock(&clock->extreg_lock);
if (!phydev->attached_dev) {
- pr_warn("expected to find an attached netdevice\n");
+ phydev_warn(phydev,
+ "expected to find an attached netdevice\n");
return;
}
if (on) {
if (dev_mc_add(phydev->attached_dev, status_frame_dst))
- pr_warn("failed to add mc address\n");
+ phydev_warn(phydev, "failed to add mc address\n");
} else {
if (dev_mc_del(phydev->attached_dev, status_frame_dst))
- pr_warn("failed to delete mc address\n");
+ phydev_warn(phydev, "failed to delete mc address\n");
}
}
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 24fc4a73c300..8872a430d74a 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -638,7 +638,7 @@ static void marvell_config_led(struct phy_device *phydev)
err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE, MII_PHY_LED_CTRL,
def_config);
if (err < 0)
- pr_warn("Fail to config marvell phy LED.\n");
+ phydev_warn(phydev, "Fail to config marvell phy LED.\n");
}
static int marvell_config_init(struct phy_device *phydev)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index f77a2d9e7f9d..f214834819dd 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -337,9 +337,9 @@ static int mv3310_config_init(struct phy_device *phydev)
}
if (!ethtool_convert_link_mode_to_legacy_u32(&mask, supported))
- dev_warn(&phydev->mdio.dev,
- "PHY supports (%*pb) more modes than phylib supports, some modes not supported.\n",
- __ETHTOOL_LINK_MODE_MASK_NBITS, supported);
+ phydev_warn(phydev,
+ "PHY supports (%*pb) more modes than phylib supports, some modes not supported.\n",
+ __ETHTOOL_LINK_MODE_MASK_NBITS, supported);
phydev->supported &= mask;
phydev->advertising &= phydev->supported;
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index 2d67937866a3..04b12e34da58 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -88,7 +88,7 @@ static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
/* Save current page */
save_page = phy_save_page(phydev);
if (save_page < 0) {
- pr_warn("Failed to get current page\n");
+ phydev_warn(phydev, "Failed to get current page\n");
goto err;
}
@@ -98,14 +98,14 @@ static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_LOW_DATA,
(data & 0xFFFF));
if (ret < 0) {
- pr_warn("Failed to write TR low data\n");
+ phydev_warn(phydev, "Failed to write TR low data\n");
goto err;
}
ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_HIGH_DATA,
(data & 0x00FF0000) >> 16);
if (ret < 0) {
- pr_warn("Failed to write TR high data\n");
+ phydev_warn(phydev, "Failed to write TR high data\n");
goto err;
}
@@ -115,14 +115,15 @@ static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_CR, buf);
if (ret < 0) {
- pr_warn("Failed to write data in reg\n");
+ phydev_warn(phydev, "Failed to write data in reg\n");
goto err;
}
usleep_range(1000, 2000);/* Wait for Data to be written */
val = __phy_read(phydev, LAN88XX_EXT_PAGE_TR_CR);
if (!(val & 0x8000))
- pr_warn("TR Register[0x%X] configuration failed\n", regaddr);
+ phydev_warn(phydev, "TR Register[0x%X] configuration failed\n",
+ regaddr);
err:
return phy_restore_page(phydev, save_page, ret);
}
@@ -137,7 +138,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x0F82, 0x12B00A);
if (err < 0)
- pr_warn("Failed to Set Register[0x0F82]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x0F82]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x06.
* Write 24-bit value 0xD2C46F to register. Setting SSTrKf1000Slv,
@@ -145,7 +146,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x168C, 0xD2C46F);
if (err < 0)
- pr_warn("Failed to Set Register[0x168C]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x168C]\n");
/* Get access to Channel b'10, Node b'1111, Register 0x11.
* Write 24-bit value 0x620 to register. Setting rem_upd_done_thresh
@@ -153,7 +154,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x17A2, 0x620);
if (err < 0)
- pr_warn("Failed to Set Register[0x17A2]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x17A2]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x10.
* Write 24-bit value 0xEEFFDD to register. Setting
@@ -162,7 +163,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x16A0, 0xEEFFDD);
if (err < 0)
- pr_warn("Failed to Set Register[0x16A0]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x16A0]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x13.
* Write 24-bit value 0x071448 to register. Setting
@@ -170,7 +171,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x16A6, 0x071448);
if (err < 0)
- pr_warn("Failed to Set Register[0x16A6]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x16A6]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x12.
* Write 24-bit value 0x13132F to register. Setting
@@ -178,7 +179,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x16A4, 0x13132F);
if (err < 0)
- pr_warn("Failed to Set Register[0x16A4]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x16A4]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x14.
* Write 24-bit value 0x0 to register. Setting eee_3level_delay,
@@ -186,7 +187,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x16A8, 0x0);
if (err < 0)
- pr_warn("Failed to Set Register[0x16A8]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x16A8]\n");
/* Get access to Channel b'01, Node b'1111, Register 0x34.
* Write 24-bit value 0x91B06C to register. Setting
@@ -195,7 +196,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x0FE8, 0x91B06C);
if (err < 0)
- pr_warn("Failed to Set Register[0x0FE8]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x0FE8]\n");
/* Get access to Channel b'01, Node b'1111, Register 0x3E.
* Write 24-bit value 0xC0A028 to register. Setting
@@ -204,7 +205,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x0FFC, 0xC0A028);
if (err < 0)
- pr_warn("Failed to Set Register[0x0FFC]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x0FFC]\n");
/* Get access to Channel b'01, Node b'1111, Register 0x35.
* Write 24-bit value 0x041600 to register. Setting
@@ -213,14 +214,14 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
*/
err = lan88xx_TR_reg_set(phydev, 0x0FEA, 0x041600);
if (err < 0)
- pr_warn("Failed to Set Register[0x0FEA]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x0FEA]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x03.
* Write 24-bit value 0x000004 to register. Setting TrFreeze bits.
*/
err = lan88xx_TR_reg_set(phydev, 0x1686, 0x000004);
if (err < 0)
- pr_warn("Failed to Set Register[0x1686]\n");
+ phydev_warn(phydev, "Failed to Set Register[0x1686]\n");
}
static int lan88xx_probe(struct phy_device *phydev)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index d24cc46748e2..0ab9f89773fd 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -968,6 +968,9 @@ static inline void phy_device_reset(struct phy_device *phydev, int value)
#define phydev_err(_phydev, format, args...) \
dev_err(&_phydev->mdio.dev, format, ##args)
+#define phydev_warn(_phydev, format, args...) \
+ dev_warn(&_phydev->mdio.dev, format, ##args)
+
#define phydev_dbg(_phydev, format, args...) \
dev_dbg(&_phydev->mdio.dev, format, ##args)
--
2.19.0.rc1
^ permalink raw reply related
* [PATCH v2 net-next 7/8] net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES
From: Andrew Lunn @ 2018-09-29 21:04 UTC (permalink / raw)
To: David Miller; +Cc: netdev, Florian Fainelli, Maxime Chevallier, Andrew Lunn
In-Reply-To: <1538255056-15114-1-git-send-email-andrew@lunn.ch>
The macro PHY_GBIT_FEAUTRES needs to change into a bitmap in order to
support link_modes. Remove its use from xgde by replacing it with its
definition.
Probably, the current behavior is wrong. It probably should be
ANDing not assigning.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
v2
Remove unneeded ()
---
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index a7e03e3ecc93..151bdb629e8a 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -878,8 +878,9 @@ static bool xgbe_phy_finisar_phy_quirks(struct xgbe_prv_data *pdata)
phy_write(phy_data->phydev, 0x04, 0x0d01);
phy_write(phy_data->phydev, 0x00, 0x9140);
- phy_data->phydev->supported = PHY_GBIT_FEATURES;
- phy_data->phydev->advertising = phy_data->phydev->supported;
+ phy_data->phydev->supported = PHY_10BT_FEATURES |
+ PHY_100BT_FEATURES |
+ PHY_1000BT_FEATURES;
phy_support_asym_pause(phy_data->phydev);
netif_dbg(pdata, drv, pdata->netdev,
@@ -950,8 +951,9 @@ static bool xgbe_phy_belfuse_phy_quirks(struct xgbe_prv_data *pdata)
reg = phy_read(phy_data->phydev, 0x00);
phy_write(phy_data->phydev, 0x00, reg & ~0x00800);
- phy_data->phydev->supported = PHY_GBIT_FEATURES;
- phy_data->phydev->advertising = phy_data->phydev->supported;
+ phy_data->phydev->supported = (PHY_10BT_FEATURES |
+ PHY_100BT_FEATURES |
+ PHY_1000BT_FEATURES);
phy_support_asym_pause(phy_data->phydev);
netif_dbg(pdata, drv, pdata->netdev,
--
2.19.0.rc1
^ permalink raw reply related
* [PATCH v2 net-next 6/8] net: phy: Add limkmode equivalents to some of the MII ethtool helpers
From: Andrew Lunn @ 2018-09-29 21:04 UTC (permalink / raw)
To: David Miller; +Cc: netdev, Florian Fainelli, Maxime Chevallier, Andrew Lunn
In-Reply-To: <1538255056-15114-1-git-send-email-andrew@lunn.ch>
Add helpers which take a linkmode rather than a u32 ethtool for
advertising settings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
include/linux/mii.h | 50 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 9ed49c8261d0..2da85b02e1c0 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -132,6 +132,34 @@ static inline u32 ethtool_adv_to_mii_adv_t(u32 ethadv)
return result;
}
+/**
+ * linkmode_adv_to_mii_adv_t
+ * @advertising: the linkmode advertisement settings
+ *
+ * A small helper function that translates linkmode advertisement
+ * settings to phy autonegotiation advertisements for the
+ * MII_ADVERTISE register.
+ */
+static inline u32 linkmode_adv_to_mii_adv_t(unsigned long *advertising)
+{
+ u32 result = 0;
+
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, advertising))
+ result |= ADVERTISE_10HALF;
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, advertising))
+ result |= ADVERTISE_10FULL;
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, advertising))
+ result |= ADVERTISE_100HALF;
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, advertising))
+ result |= ADVERTISE_100FULL;
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertising))
+ result |= ADVERTISE_PAUSE_CAP;
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertising))
+ result |= ADVERTISE_PAUSE_ASYM;
+
+ return result;
+}
+
/**
* mii_adv_to_ethtool_adv_t
* @adv: value of the MII_ADVERTISE register
@@ -179,6 +207,28 @@ static inline u32 ethtool_adv_to_mii_ctrl1000_t(u32 ethadv)
return result;
}
+/**
+ * linkmode_adv_to_mii_ctrl1000_t
+ * advertising: the linkmode advertisement settings
+ *
+ * A small helper function that translates linkmode advertisement
+ * settings to phy autonegotiation advertisements for the
+ * MII_CTRL1000 register when in 1000T mode.
+ */
+static inline u32 linkmode_adv_to_mii_ctrl1000_t(unsigned long *advertising)
+{
+ u32 result = 0;
+
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+ advertising))
+ result |= ADVERTISE_1000HALF;
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ advertising))
+ result |= ADVERTISE_1000FULL;
+
+ return result;
+}
+
/**
* mii_ctrl1000_to_ethtool_adv_t
* @adv: value of the MII_CTRL1000 register
--
2.19.0.rc1
^ permalink raw reply related
* [PATCH v2 net-next 3/8] net: phy: Add phydev_info()
From: Andrew Lunn @ 2018-09-29 21:04 UTC (permalink / raw)
To: David Miller; +Cc: netdev, Florian Fainelli, Maxime Chevallier, Andrew Lunn
In-Reply-To: <1538255056-15114-1-git-send-email-andrew@lunn.ch>
Add phydev_info() and make use of it within the phy drivers and core
code.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/phy/dp83640.c | 11 ++++++-----
drivers/net/phy/phy_device.c | 4 ++--
include/linux/phy.h | 3 +++
3 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 74cf356d8171..edd4d44a386d 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -687,9 +687,9 @@ static void recalibrate(struct dp83640_clock *clock)
* read out and correct offsets
*/
val = ext_read(master, PAGE4, PTP_STS);
- pr_info("master PTP_STS 0x%04hx\n", val);
+ phydev_info(master, "master PTP_STS 0x%04hx\n", val);
val = ext_read(master, PAGE4, PTP_ESTS);
- pr_info("master PTP_ESTS 0x%04hx\n", val);
+ phydev_info(master, "master PTP_ESTS 0x%04hx\n", val);
event_ts.ns_lo = ext_read(master, PAGE4, PTP_EDATA);
event_ts.ns_hi = ext_read(master, PAGE4, PTP_EDATA);
event_ts.sec_lo = ext_read(master, PAGE4, PTP_EDATA);
@@ -699,15 +699,16 @@ static void recalibrate(struct dp83640_clock *clock)
list_for_each(this, &clock->phylist) {
tmp = list_entry(this, struct dp83640_private, list);
val = ext_read(tmp->phydev, PAGE4, PTP_STS);
- pr_info("slave PTP_STS 0x%04hx\n", val);
+ phydev_info(tmp->phydev, "slave PTP_STS 0x%04hx\n", val);
val = ext_read(tmp->phydev, PAGE4, PTP_ESTS);
- pr_info("slave PTP_ESTS 0x%04hx\n", val);
+ phydev_info(tmp->phydev, "slave PTP_ESTS 0x%04hx\n", val);
event_ts.ns_lo = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
event_ts.ns_hi = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
event_ts.sec_lo = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
event_ts.sec_hi = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
diff = now - (s64) phy2txts(&event_ts);
- pr_info("slave offset %lld nanoseconds\n", diff);
+ phydev_info(tmp->phydev, "slave offset %lld nanoseconds\n",
+ diff);
diff += ADJTIME_FIX;
ts = ns_to_timespec64(diff);
tdr_write(0, tmp->phydev, &ts, PTP_STEP_CLK);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index ee676d75fe02..35102e17bbeb 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -920,13 +920,13 @@ void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
if (!fmt) {
- dev_info(&phydev->mdio.dev, ATTACHED_FMT "\n",
+ phydev_info(phydev, ATTACHED_FMT "\n",
drv_name, phydev_name(phydev),
irq_str);
} else {
va_list ap;
- dev_info(&phydev->mdio.dev, ATTACHED_FMT,
+ phydev_info(phydev, ATTACHED_FMT,
drv_name, phydev_name(phydev),
irq_str);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 0ab9f89773fd..0f6e7bf5e9c5 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -968,6 +968,9 @@ static inline void phy_device_reset(struct phy_device *phydev, int value)
#define phydev_err(_phydev, format, args...) \
dev_err(&_phydev->mdio.dev, format, ##args)
+#define phydev_info(_phydev, format, args...) \
+ dev_info(&_phydev->mdio.dev, format, ##args)
+
#define phydev_warn(_phydev, format, args...) \
dev_warn(&_phydev->mdio.dev, format, ##args)
--
2.19.0.rc1
^ permalink raw reply related
* [PATCH v2 net-next 8/8] net: phy: Replace phy driver features u32 with link_mode bitmap
From: Andrew Lunn @ 2018-09-29 21:04 UTC (permalink / raw)
To: David Miller; +Cc: netdev, Florian Fainelli, Maxime Chevallier, Andrew Lunn
In-Reply-To: <1538255056-15114-1-git-send-email-andrew@lunn.ch>
This is one step in allowing phylib to make use of link_mode bitmaps,
instead of u32 for supported and advertised features. Convert the phy
drivers to use bitmaps to indicates the features they support.
Build bitmap equivalents of the u32 values at runtime, and have the
drivers point to the appropriate bitmap. These bitmaps are shared, and
we don't want a driver to modify them. So mark them __ro_after_init.
Within phylib, the features bitmap is currently turned back into a
u32. This will be removed once the whole of phylib, and the drivers
are converted to use bitmaps.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/ethernet/marvell/pxa168_eth.c | 4 +-
drivers/net/phy/aquantia.c | 12 +-
drivers/net/phy/bcm63xx.c | 9 +-
drivers/net/phy/marvell.c | 2 +-
drivers/net/phy/marvell10g.c | 11 +-
drivers/net/phy/microchip_t1.c | 2 +-
drivers/net/phy/phy_device.c | 164 +++++++++++++++++++++-
include/linux/linkmode.h | 9 ++
include/linux/phy.h | 24 ++--
9 files changed, 198 insertions(+), 39 deletions(-)
diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index ff2fea0f8b75..0bd4351b2a49 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -988,8 +988,8 @@ static int pxa168_init_phy(struct net_device *dev)
cmd.base.phy_address = pep->phy_addr;
cmd.base.speed = pep->phy_speed;
cmd.base.duplex = pep->phy_duplex;
- ethtool_convert_legacy_u32_to_link_mode(cmd.link_modes.advertising,
- PHY_BASIC_FEATURES);
+ bitmap_copy(cmd.link_modes.advertising, PHY_BASIC_FEATURES,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
cmd.base.autoneg = AUTONEG_ENABLE;
if (cmd.base.speed != 0)
diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c
index 319edc9c8ec7..632472cab3bb 100644
--- a/drivers/net/phy/aquantia.c
+++ b/drivers/net/phy/aquantia.c
@@ -115,7 +115,7 @@ static struct phy_driver aquantia_driver[] = {
.phy_id = PHY_ID_AQ1202,
.phy_id_mask = 0xfffffff0,
.name = "Aquantia AQ1202",
- .features = PHY_AQUANTIA_FEATURES,
+ .features = PHY_10GBIT_FULL_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.aneg_done = genphy_c45_aneg_done,
.config_aneg = aquantia_config_aneg,
@@ -127,7 +127,7 @@ static struct phy_driver aquantia_driver[] = {
.phy_id = PHY_ID_AQ2104,
.phy_id_mask = 0xfffffff0,
.name = "Aquantia AQ2104",
- .features = PHY_AQUANTIA_FEATURES,
+ .features = PHY_10GBIT_FULL_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.aneg_done = genphy_c45_aneg_done,
.config_aneg = aquantia_config_aneg,
@@ -139,7 +139,7 @@ static struct phy_driver aquantia_driver[] = {
.phy_id = PHY_ID_AQR105,
.phy_id_mask = 0xfffffff0,
.name = "Aquantia AQR105",
- .features = PHY_AQUANTIA_FEATURES,
+ .features = PHY_10GBIT_FULL_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.aneg_done = genphy_c45_aneg_done,
.config_aneg = aquantia_config_aneg,
@@ -151,7 +151,7 @@ static struct phy_driver aquantia_driver[] = {
.phy_id = PHY_ID_AQR106,
.phy_id_mask = 0xfffffff0,
.name = "Aquantia AQR106",
- .features = PHY_AQUANTIA_FEATURES,
+ .features = PHY_10GBIT_FULL_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.aneg_done = genphy_c45_aneg_done,
.config_aneg = aquantia_config_aneg,
@@ -163,7 +163,7 @@ static struct phy_driver aquantia_driver[] = {
.phy_id = PHY_ID_AQR107,
.phy_id_mask = 0xfffffff0,
.name = "Aquantia AQR107",
- .features = PHY_AQUANTIA_FEATURES,
+ .features = PHY_10GBIT_FULL_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.aneg_done = genphy_c45_aneg_done,
.config_aneg = aquantia_config_aneg,
@@ -175,7 +175,7 @@ static struct phy_driver aquantia_driver[] = {
.phy_id = PHY_ID_AQR405,
.phy_id_mask = 0xfffffff0,
.name = "Aquantia AQR405",
- .features = PHY_AQUANTIA_FEATURES,
+ .features = PHY_10GBIT_FULL_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.aneg_done = genphy_c45_aneg_done,
.config_aneg = aquantia_config_aneg,
diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
index cf14613745c9..d95bffdec4c1 100644
--- a/drivers/net/phy/bcm63xx.c
+++ b/drivers/net/phy/bcm63xx.c
@@ -42,6 +42,9 @@ static int bcm63xx_config_init(struct phy_device *phydev)
{
int reg, err;
+ /* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */
+ phydev->supported |= SUPPORTED_Pause;
+
reg = phy_read(phydev, MII_BCM63XX_IR);
if (reg < 0)
return reg;
@@ -65,8 +68,7 @@ static struct phy_driver bcm63xx_driver[] = {
.phy_id = 0x00406000,
.phy_id_mask = 0xfffffc00,
.name = "Broadcom BCM63XX (1)",
- /* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */
- .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .features = PHY_BASIC_FEATURES,
.flags = PHY_HAS_INTERRUPT | PHY_IS_INTERNAL,
.config_init = bcm63xx_config_init,
.ack_interrupt = bcm_phy_ack_intr,
@@ -75,8 +77,7 @@ static struct phy_driver bcm63xx_driver[] = {
/* same phy as above, with just a different OUI */
.phy_id = 0x002bdc00,
.phy_id_mask = 0xfffffc00,
- .name = "Broadcom BCM63XX (2)",
- .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .features = PHY_BASIC_FEATURES,
.flags = PHY_HAS_INTERRUPT | PHY_IS_INTERNAL,
.config_init = bcm63xx_config_init,
.ack_interrupt = bcm_phy_ack_intr,
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 8872a430d74a..cbec296107bd 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -2201,7 +2201,7 @@ static struct phy_driver marvell_drivers[] = {
.phy_id = MARVELL_PHY_ID_88E1510,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1510",
- .features = PHY_GBIT_FEATURES | SUPPORTED_FIBRE,
+ .features = PHY_GBIT_FIBRE_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.probe = &m88e1510_probe,
.config_init = &m88e1510_config_init,
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index f214834819dd..1c9d039eec63 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -535,16 +535,7 @@ static struct phy_driver mv3310_drivers[] = {
.phy_id = 0x002b09aa,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "mv88x3310",
- .features = SUPPORTED_10baseT_Full |
- SUPPORTED_10baseT_Half |
- SUPPORTED_100baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_1000baseT_Full |
- SUPPORTED_Autoneg |
- SUPPORTED_TP |
- SUPPORTED_FIBRE |
- SUPPORTED_10000baseT_Full |
- SUPPORTED_Backplane,
+ .features = PHY_10GBIT_FEATURES,
.soft_reset = gen10g_no_soft_reset,
.config_init = mv3310_config_init,
.probe = mv3310_probe,
diff --git a/drivers/net/phy/microchip_t1.c b/drivers/net/phy/microchip_t1.c
index b1917dd1978a..c600a8509d60 100644
--- a/drivers/net/phy/microchip_t1.c
+++ b/drivers/net/phy/microchip_t1.c
@@ -46,7 +46,7 @@ static struct phy_driver microchip_t1_phy_driver[] = {
.phy_id_mask = 0xfffffff0,
.name = "Microchip LAN87xx T1",
- .features = SUPPORTED_100baseT_Full,
+ .features = PHY_BASIC_T1_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = genphy_config_init,
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 35102e17bbeb..f53ce65f45c5 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -29,6 +29,7 @@
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
+#include <linux/bitmap.h>
#include <linux/phy.h>
#include <linux/phy_led_triggers.h>
#include <linux/mdio.h>
@@ -42,6 +43,149 @@ MODULE_DESCRIPTION("PHY library");
MODULE_AUTHOR("Andy Fleming");
MODULE_LICENSE("GPL");
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_basic_features);
+
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_basic_t1_features);
+
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_gbit_features);
+
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_gbit_fibre_features);
+
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_gbit_all_ports_features);
+
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_10gbit_features);
+
+static const int phy_basic_ports_array[] = {
+ ETHTOOL_LINK_MODE_Autoneg_BIT,
+ ETHTOOL_LINK_MODE_TP_BIT,
+ ETHTOOL_LINK_MODE_MII_BIT,
+};
+
+static const int phy_fibre_port_array[] = {
+ ETHTOOL_LINK_MODE_FIBRE_BIT,
+};
+
+static const int phy_all_ports_features_array[] = {
+ ETHTOOL_LINK_MODE_Autoneg_BIT,
+ ETHTOOL_LINK_MODE_TP_BIT,
+ ETHTOOL_LINK_MODE_MII_BIT,
+ ETHTOOL_LINK_MODE_FIBRE_BIT,
+ ETHTOOL_LINK_MODE_AUI_BIT,
+ ETHTOOL_LINK_MODE_BNC_BIT,
+ ETHTOOL_LINK_MODE_Backplane_BIT,
+};
+
+static const int phy_10_100_features_array[] = {
+ ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+ ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+ ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+ ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+};
+
+static const int phy_basic_t1_features_array[] = {
+ ETHTOOL_LINK_MODE_TP_BIT,
+ ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+};
+
+static const int phy_gbit_features_array[] = {
+ ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+ ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+};
+
+static const int phy_10gbit_features_array[] = {
+ ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+};
+
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_10gbit_full_features);
+
+static const int phy_10gbit_full_features_array[] = {
+ ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+ ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+ ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+};
+
+static void features_init(void)
+{
+ /* 10/100 half/full*/
+ linkmode_set_bit_array(phy_basic_ports_array,
+ ARRAY_SIZE(phy_basic_ports_array),
+ phy_basic_features);
+ linkmode_set_bit_array(phy_10_100_features_array,
+ ARRAY_SIZE(phy_10_100_features_array),
+ phy_basic_features);
+
+ /* 100 full, TP */
+ linkmode_set_bit_array(phy_basic_t1_features_array,
+ ARRAY_SIZE(phy_basic_t1_features_array),
+ phy_basic_t1_features);
+
+ /* 10/100 half/full + 1000 half/full */
+ linkmode_set_bit_array(phy_basic_ports_array,
+ ARRAY_SIZE(phy_basic_ports_array),
+ phy_gbit_features);
+ linkmode_set_bit_array(phy_10_100_features_array,
+ ARRAY_SIZE(phy_10_100_features_array),
+ phy_gbit_features);
+ linkmode_set_bit_array(phy_gbit_features_array,
+ ARRAY_SIZE(phy_gbit_features_array),
+ phy_gbit_features);
+
+ /* 10/100 half/full + 1000 half/full + fibre*/
+ linkmode_set_bit_array(phy_basic_ports_array,
+ ARRAY_SIZE(phy_basic_ports_array),
+ phy_gbit_fibre_features);
+ linkmode_set_bit_array(phy_10_100_features_array,
+ ARRAY_SIZE(phy_10_100_features_array),
+ phy_gbit_fibre_features);
+ linkmode_set_bit_array(phy_gbit_features_array,
+ ARRAY_SIZE(phy_gbit_features_array),
+ phy_gbit_fibre_features);
+ linkmode_set_bit_array(phy_fibre_port_array,
+ ARRAY_SIZE(phy_fibre_port_array),
+ phy_gbit_fibre_features);
+
+ /* 10/100 half/full + 1000 half/full + TP/MII/FIBRE/AUI/BNC/Backplane*/
+ linkmode_set_bit_array(phy_all_ports_features_array,
+ ARRAY_SIZE(phy_all_ports_features_array),
+ phy_gbit_all_ports_features);
+ linkmode_set_bit_array(phy_10_100_features_array,
+ ARRAY_SIZE(phy_10_100_features_array),
+ phy_gbit_all_ports_features);
+ linkmode_set_bit_array(phy_gbit_features_array,
+ ARRAY_SIZE(phy_gbit_features_array),
+ phy_gbit_all_ports_features);
+
+ /* 10/100 half/full + 1000 half/full + 10G full*/
+ linkmode_set_bit_array(phy_all_ports_features_array,
+ ARRAY_SIZE(phy_all_ports_features_array),
+ phy_10gbit_features);
+ linkmode_set_bit_array(phy_10_100_features_array,
+ ARRAY_SIZE(phy_10_100_features_array),
+ phy_10gbit_features);
+ linkmode_set_bit_array(phy_gbit_features_array,
+ ARRAY_SIZE(phy_gbit_features_array),
+ phy_10gbit_features);
+ linkmode_set_bit_array(phy_10gbit_features_array,
+ ARRAY_SIZE(phy_10gbit_features_array),
+ phy_10gbit_features);
+
+ /* 10/100/1000/10G full */
+ linkmode_set_bit_array(phy_all_ports_features_array,
+ ARRAY_SIZE(phy_all_ports_features_array),
+ phy_10gbit_full_features);
+ linkmode_set_bit_array(phy_10gbit_full_features_array,
+ ARRAY_SIZE(phy_10gbit_full_features_array),
+ phy_10gbit_full_features);
+}
+
void phy_device_free(struct phy_device *phydev)
{
put_device(&phydev->mdio.dev);
@@ -1936,6 +2080,7 @@ static int phy_probe(struct device *dev)
struct phy_device *phydev = to_phy_device(dev);
struct device_driver *drv = phydev->mdio.dev.driver;
struct phy_driver *phydrv = to_phy_driver(drv);
+ u32 features;
int err = 0;
phydev->drv = phydrv;
@@ -1956,7 +2101,8 @@ static int phy_probe(struct device *dev)
* a controller will attach, and may modify one
* or both of these values
*/
- phydev->supported = phydrv->features;
+ ethtool_convert_link_mode_to_legacy_u32(&features, phydrv->features);
+ phydev->supported = features;
of_set_phy_supported(phydev);
phydev->advertising = phydev->supported;
@@ -1976,10 +2122,14 @@ static int phy_probe(struct device *dev)
* (e.g. hardware erratum) where the driver wants to set only one
* of these bits.
*/
- if (phydrv->features & (SUPPORTED_Pause | SUPPORTED_Asym_Pause)) {
+ if (test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydrv->features) ||
+ test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydrv->features)) {
phydev->supported &= ~(SUPPORTED_Pause | SUPPORTED_Asym_Pause);
- phydev->supported |= phydrv->features &
- (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+ if (test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydrv->features))
+ phydev->supported |= SUPPORTED_Pause;
+ if (test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ phydrv->features))
+ phydev->supported |= SUPPORTED_Asym_Pause;
} else {
phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
}
@@ -2092,9 +2242,7 @@ static struct phy_driver genphy_driver = {
.name = "Generic PHY",
.soft_reset = genphy_no_soft_reset,
.config_init = genphy_config_init,
- .features = PHY_GBIT_FEATURES | SUPPORTED_MII |
- SUPPORTED_AUI | SUPPORTED_FIBRE |
- SUPPORTED_BNC,
+ .features = PHY_GBIT_ALL_PORTS_FEATURES,
.aneg_done = genphy_aneg_done,
.suspend = genphy_suspend,
.resume = genphy_resume,
@@ -2109,6 +2257,8 @@ static int __init phy_init(void)
if (rc)
return rc;
+ features_init();
+
rc = phy_driver_register(&genphy_10g_driver, THIS_MODULE);
if (rc)
goto err_10g;
diff --git a/include/linux/linkmode.h b/include/linux/linkmode.h
index 014fb86c7114..22443d7fb5cd 100644
--- a/include/linux/linkmode.h
+++ b/include/linux/linkmode.h
@@ -43,6 +43,15 @@ static inline void linkmode_set_bit(int nr, volatile unsigned long *addr)
__set_bit(nr, addr);
}
+static inline void linkmode_set_bit_array(const int *array, int array_size,
+ unsigned long *addr)
+{
+ int i;
+
+ for (i = 0; i < array_size; i++)
+ linkmode_set_bit(array[i], addr);
+}
+
static inline void linkmode_clear_bit(int nr, volatile unsigned long *addr)
{
__clear_bit(nr, addr);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 0f6e7bf5e9c5..dff51dd36e52 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -42,13 +42,21 @@
#define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \
SUPPORTED_1000baseT_Full)
-#define PHY_BASIC_FEATURES (PHY_10BT_FEATURES | \
- PHY_100BT_FEATURES | \
- PHY_DEFAULT_FEATURES)
-
-#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
- PHY_1000BT_FEATURES)
-
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init;
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init;
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init;
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init;
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_init;
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init;
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init;
+
+#define PHY_BASIC_FEATURES ((unsigned long *)&phy_basic_features)
+#define PHY_BASIC_T1_FEATURES ((unsigned long *)&phy_basic_t1_features)
+#define PHY_GBIT_FEATURES ((unsigned long *)&phy_gbit_features)
+#define PHY_GBIT_FIBRE_FEATURES ((unsigned long *)&phy_gbit_fibre_features)
+#define PHY_GBIT_ALL_PORTS_FEATURES ((unsigned long *)&phy_gbit_all_ports_features)
+#define PHY_10GBIT_FEATURES ((unsigned long *)&phy_10gbit_features)
+#define PHY_10GBIT_FULL_FEATURES ((unsigned long *)&phy_10gbit_full_features)
/*
* Set phydev->irq to PHY_POLL if interrupts are not supported,
@@ -510,7 +518,7 @@ struct phy_driver {
u32 phy_id;
char *name;
u32 phy_id_mask;
- u32 features;
+ const unsigned long * const features;
u32 flags;
const void *driver_data;
--
2.19.0.rc1
^ permalink raw reply related
* [PATCH v2 net-next 5/8] net: phy: Add helper for advertise to lcl value
From: Andrew Lunn @ 2018-09-29 21:04 UTC (permalink / raw)
To: David Miller; +Cc: netdev, Florian Fainelli, Maxime Chevallier, Andrew Lunn
In-Reply-To: <1538255056-15114-1-git-send-email-andrew@lunn.ch>
Add a helper to convert the local advertising to an LCL capabilities,
which is then used to resolve pause flow control settings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
drivers/net/dsa/mt7530.c | 6 +-----
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 5 +----
drivers/net/ethernet/freescale/fman/mac.c | 6 +-----
drivers/net/ethernet/freescale/gianfar.c | 7 +------
.../hisilicon/hns3/hns3pf/hclge_main.c | 6 +-----
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 6 +-----
drivers/net/ethernet/socionext/sni_ave.c | 5 +----
include/linux/mii.h | 19 +++++++++++++++++++
8 files changed, 26 insertions(+), 34 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 62e486652e62..a5de9bffe5be 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -658,11 +658,7 @@ static void mt7530_adjust_link(struct dsa_switch *ds, int port,
if (phydev->asym_pause)
rmt_adv |= LPA_PAUSE_ASYM;
- if (phydev->advertising & ADVERTISED_Pause)
- lcl_adv |= ADVERTISE_PAUSE_CAP;
- if (phydev->advertising & ADVERTISED_Asym_Pause)
- lcl_adv |= ADVERTISE_PAUSE_ASYM;
-
+ lcl_adv = ethtool_adv_to_lcl_adv_t(phydev->advertising);
flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
if (flowctrl & FLOW_CTRL_TX)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 289129011b9f..a7e03e3ecc93 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -1495,10 +1495,7 @@ static void xgbe_phy_phydev_flowctrl(struct xgbe_prv_data *pdata)
if (!phy_data->phydev)
return;
- if (phy_data->phydev->advertising & ADVERTISED_Pause)
- lcl_adv |= ADVERTISE_PAUSE_CAP;
- if (phy_data->phydev->advertising & ADVERTISED_Asym_Pause)
- lcl_adv |= ADVERTISE_PAUSE_ASYM;
+ lcl_adv = ethtool_adv_to_lcl_adv_t(phy_data->phydev->advertising);
if (phy_data->phydev->pause) {
XGBE_SET_LP_ADV(lks, Pause);
diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c
index a847b9c3b31a..d79e4e009d63 100644
--- a/drivers/net/ethernet/freescale/fman/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac.c
@@ -393,11 +393,7 @@ void fman_get_pause_cfg(struct mac_device *mac_dev, bool *rx_pause,
*/
/* get local capabilities */
- lcl_adv = 0;
- if (phy_dev->advertising & ADVERTISED_Pause)
- lcl_adv |= ADVERTISE_PAUSE_CAP;
- if (phy_dev->advertising & ADVERTISED_Asym_Pause)
- lcl_adv |= ADVERTISE_PAUSE_ASYM;
+ lcl_adv = ethtool_adv_to_lcl_adv_t(phy_dev->advertising);
/* get link partner capabilities */
rmt_adv = 0;
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 0bd21a493016..3c8da1a18ba0 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -3656,12 +3656,7 @@ static u32 gfar_get_flowctrl_cfg(struct gfar_private *priv)
if (phydev->asym_pause)
rmt_adv |= LPA_PAUSE_ASYM;
- lcl_adv = 0;
- if (phydev->advertising & ADVERTISED_Pause)
- lcl_adv |= ADVERTISE_PAUSE_CAP;
- if (phydev->advertising & ADVERTISED_Asym_Pause)
- lcl_adv |= ADVERTISE_PAUSE_ASYM;
-
+ lcl_adv = ethtool_adv_to_lcl_adv_t(phydev->advertising);
flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
if (flowctrl & FLOW_CTRL_TX)
val |= MACCFG1_TX_FLOW;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 7c8b686b1ce1..c17ceeefa453 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -5006,11 +5006,7 @@ int hclge_cfg_flowctrl(struct hclge_dev *hdev)
if (!phydev->link || !phydev->autoneg)
return 0;
- if (phydev->advertising & ADVERTISED_Pause)
- local_advertising = ADVERTISE_PAUSE_CAP;
-
- if (phydev->advertising & ADVERTISED_Asym_Pause)
- local_advertising |= ADVERTISE_PAUSE_ASYM;
+ local_advertising = ethtool_adv_to_lcl_adv_t(phydev->advertising);
if (phydev->pause)
remote_advertising = LPA_PAUSE_CAP;
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index cc1e9a96a43b..7dbfdac4067a 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -243,11 +243,7 @@ static void mtk_phy_link_adjust(struct net_device *dev)
if (dev->phydev->asym_pause)
rmt_adv |= LPA_PAUSE_ASYM;
- if (dev->phydev->advertising & ADVERTISED_Pause)
- lcl_adv |= ADVERTISE_PAUSE_CAP;
- if (dev->phydev->advertising & ADVERTISED_Asym_Pause)
- lcl_adv |= ADVERTISE_PAUSE_ASYM;
-
+ lcl_adv = ethtool_adv_to_lcl_adv_t(dev->phydev->advertising);
flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
if (flowctrl & FLOW_CTRL_TX)
diff --git a/drivers/net/ethernet/socionext/sni_ave.c b/drivers/net/ethernet/socionext/sni_ave.c
index 2a156dcd4534..6732f5cbde08 100644
--- a/drivers/net/ethernet/socionext/sni_ave.c
+++ b/drivers/net/ethernet/socionext/sni_ave.c
@@ -1116,11 +1116,8 @@ static void ave_phy_adjust_link(struct net_device *ndev)
rmt_adv |= LPA_PAUSE_CAP;
if (phydev->asym_pause)
rmt_adv |= LPA_PAUSE_ASYM;
- if (phydev->advertising & ADVERTISED_Pause)
- lcl_adv |= ADVERTISE_PAUSE_CAP;
- if (phydev->advertising & ADVERTISED_Asym_Pause)
- lcl_adv |= ADVERTISE_PAUSE_ASYM;
+ lcl_adv = ethtool_adv_to_lcl_adv_t(phydev->advertising);
cap = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
if (cap & FLOW_CTRL_TX)
txcr |= AVE_TXCR_FLOCTR;
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 8c7da9473ad9..9ed49c8261d0 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -334,6 +334,25 @@ static inline void mii_adv_to_linkmode_adv_t(unsigned long *advertising,
linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertising);
}
+/**
+ * ethtool_adv_to_lcl_adv_t
+ * @advertising:pointer to ethtool advertising
+ *
+ * A small helper function that translates ethtool advertising to LVL
+ * pause capabilities.
+ */
+static inline u32 ethtool_adv_to_lcl_adv_t(u32 advertising)
+{
+ u32 lcl_adv = 0;
+
+ if (advertising & ADVERTISED_Pause)
+ lcl_adv |= ADVERTISE_PAUSE_CAP;
+ if (advertising & ADVERTISED_Asym_Pause)
+ lcl_adv |= ADVERTISE_PAUSE_ASYM;
+
+ return lcl_adv;
+}
+
/**
* mii_advertise_flowctrl - get flow control advertisement flags
* @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
--
2.19.0.rc1
^ permalink raw reply related
* [PATCH v2 net-next 4/8] net: phy: Add helper to convert MII ADV register to a linkmode
From: Andrew Lunn @ 2018-09-29 21:04 UTC (permalink / raw)
To: David Miller; +Cc: netdev, Florian Fainelli, Maxime Chevallier, Andrew Lunn
In-Reply-To: <1538255056-15114-1-git-send-email-andrew@lunn.ch>
The phy_mii_ioctl can be used to write a value into the MII_ADVERTISE
register in the PHY. Since this changes the state of the PHY, we need
to make the same change to phydev->advertising. Add a helper which can
convert the register value to a linkmode.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
include/linux/mii.h | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 567047ef0309..8c7da9473ad9 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -303,6 +303,37 @@ static inline u32 mii_lpa_to_ethtool_lpa_x(u32 lpa)
return result | mii_adv_to_ethtool_adv_x(lpa);
}
+/**
+ * mii_adv_to_linkmode_adv_t
+ * @advertising:pointer to destination link mode.
+ * @adv: value of the MII_ADVERTISE register
+ *
+ * A small helper function that translates MII_ADVERTISE bits
+ * to linkmode advertisement settings.
+ */
+static inline void mii_adv_to_linkmode_adv_t(unsigned long *advertising,
+ u32 adv)
+{
+ linkmode_zero(advertising);
+
+ if (adv & ADVERTISE_10HALF)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+ advertising);
+ if (adv & ADVERTISE_10FULL)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+ advertising);
+ if (adv & ADVERTISE_100HALF)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+ advertising);
+ if (adv & ADVERTISE_100FULL)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+ advertising);
+ if (adv & ADVERTISE_PAUSE_CAP)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertising);
+ if (adv & ADVERTISE_PAUSE_ASYM)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertising);
+}
+
/**
* mii_advertise_flowctrl - get flow control advertisement flags
* @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
--
2.19.0.rc1
^ permalink raw reply related
* Re: [PATCH v3 net-next 4/9] bnxt_en: Use ignore_ari devlink parameter
From: Or Gerlitz @ 2018-09-29 21:22 UTC (permalink / raw)
To: vasundhara-v.volam
Cc: David Miller, Michael Chan, Linux Netdev List, Jiri Pirko,
Jakub Kicinski
In-Reply-To: <1538116103-12356-5-git-send-email-vasundhara-v.volam@broadcom.com>
On Fri, Sep 28, 2018 at 9:30 AM Vasundhara Volam
<vasundhara-v.volam@broadcom.com> wrote:
> This patch adds support for ignore_ari generic permanent mode
> devlink parameter. This parameter is disabled by default. It can be
> enabled using devlink param commands.
>
> ignore_ari - If enabled, device ignores ARI(Alternate Routing ID)
> capability, even when platforms has the support and creates same number
> of partitions when platform does not support ARI capability.
why you want to ignore that?
>
> Cc: Michael Chan <michael.chan@broadcom.com>
> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
> ---
> drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c | 6 ++++++
> drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h | 2 ++
> 2 files changed, 8 insertions(+)
>
> diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c
> index 790c684..5173881 100644
> --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c
> +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c
> @@ -24,6 +24,8 @@
> static const struct bnxt_dl_nvm_param nvm_params[] = {
> {DEVLINK_PARAM_GENERIC_ID_ENABLE_SRIOV, NVM_OFF_ENABLE_SRIOV,
> BNXT_NVM_SHARED_CFG, 1},
> + {DEVLINK_PARAM_GENERIC_ID_IGNORE_ARI, NVM_OFF_IGNORE_ARI,
> + BNXT_NVM_SHARED_CFG, 1},
> };
>
> static int bnxt_hwrm_nvm_req(struct bnxt *bp, u32 param_id, void *msg,
> @@ -108,6 +110,10 @@ static int bnxt_dl_nvm_param_set(struct devlink *dl, u32 id,
> BIT(DEVLINK_PARAM_CMODE_PERMANENT),
> bnxt_dl_nvm_param_get, bnxt_dl_nvm_param_set,
> NULL),
> + DEVLINK_PARAM_GENERIC(IGNORE_ARI,
> + BIT(DEVLINK_PARAM_CMODE_PERMANENT),
> + bnxt_dl_nvm_param_get, bnxt_dl_nvm_param_set,
> + NULL),
> };
>
> int bnxt_dl_register(struct bnxt *bp)
> diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h
> index 2f68dc0..da146492 100644
> --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h
> +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h
> @@ -33,6 +33,8 @@ static inline void bnxt_link_bp_to_dl(struct bnxt *bp, struct devlink *dl)
> }
> }
>
> +#define NVM_OFF_IGNORE_ARI 164
> +#define NVM_OFF_HW_TC_OFFLOAD 170
what is this (on/off for TC offloads?) and how it's related to ARI?
> #define NVM_OFF_ENABLE_SRIOV 401
^ permalink raw reply
* Re: [PATCH net-next v6 01/23] asm: simd context helper API
From: Joe Perches @ 2018-09-30 4:20 UTC (permalink / raw)
To: Jason A. Donenfeld, Ard Biesheuvel
Cc: LKML, Netdev, Linux Crypto Mailing List, David Miller,
Greg Kroah-Hartman, Samuel Neves, Andrew Lutomirski,
Thomas Gleixner, linux-arch
In-Reply-To: <CAHmME9rqsOid6UOx+VTsFzJLEiaXpTP_z_wvHC6MbeAQUeEtHg@mail.gmail.com>
On Fri, 2018-09-28 at 16:01 +0200, Jason A. Donenfeld wrote:
> On Fri, Sep 28, 2018 at 4:00 PM Ard Biesheuvel
> <ard.biesheuvel@linaro.org> wrote:
> >
> > On 28 September 2018 at 15:59, Jason A. Donenfeld <Jason@zx2c4.com> wrote:
> > > On Fri, Sep 28, 2018 at 3:58 PM Ard Biesheuvel
> > > <ard.biesheuvel@linaro.org> wrote:
> > > >
> > > > On 28 September 2018 at 15:47, Jason A. Donenfeld <Jason@zx2c4.com> wrote:
> > > > > On Fri, Sep 28, 2018 at 10:49 AM Ard Biesheuvel
> > > > > <ard.biesheuvel@linaro.org> wrote:
> > > > > > > > +typedef enum {
> > > > > > > > + HAVE_NO_SIMD = 1 << 0,
> > > > > > > > + HAVE_FULL_SIMD = 1 << 1,
> > > > > > > > + HAVE_SIMD_IN_USE = 1 << 31
> > > > > > > > +} simd_context_t;
> > > > > > > > +
> > > > > >
> > > > > > Oh, and another thing (and I'm surprised checkpatch.pl didn't complain
> > > > > > about it): the use of typedef in new code is strongly discouraged.
> > > > > > This policy predates my involvement, so perhaps Joe can elaborate on
> > > > > > the rationale?
> > > > >
> > > > > In case it matters, the motivation for making this a typedef is I
> > > > > could imagine this at some point turning into a more complicated
> > > > > struct on certain platforms and that would make refactoring easier. I
> > > > > could just make it `struct simd_context` now with 1 member though...
> > > >
> > > > Yes that makes sense
> > >
> > > The rationale for it being a typedef or moving to a struct now?
> >
> > Yes just switch to a struct.
>
> Okay. No problem with that, but will wait to hear from Joe first.
Why do you need to hear from me again?
As far as I know, the only info about typedef avoidance are in
Documentation/process/coding-style.rst section 5.
^ permalink raw reply
* Re: [PATCH net-next v6 01/23] asm: simd context helper API
From: Andy Lutomirski @ 2018-09-30 5:35 UTC (permalink / raw)
To: Joe Perches
Cc: Jason A. Donenfeld, Ard Biesheuvel, LKML, Netdev,
Linux Crypto Mailing List, David Miller, Greg Kroah-Hartman,
Samuel Neves, Andrew Lutomirski, Thomas Gleixner, linux-arch
In-Reply-To: <8afdd3b1c51587708db6ae878eb0a7e9f8b5673a.camel@perches.com>
> On Sep 29, 2018, at 9:20 PM, Joe Perches <joe@perches.com> wrote:
>
>> On Fri, 2018-09-28 at 16:01 +0200, Jason A. Donenfeld wrote:
>> On Fri, Sep 28, 2018 at 4:00 PM Ard Biesheuvel
>> <ard.biesheuvel@linaro.org> wrote:
>>>
>>>> On 28 September 2018 at 15:59, Jason A. Donenfeld <Jason@zx2c4.com> wrote:
>>>> On Fri, Sep 28, 2018 at 3:58 PM Ard Biesheuvel
>>>> <ard.biesheuvel@linaro.org> wrote:
>>>>>
>>>>>> On 28 September 2018 at 15:47, Jason A. Donenfeld <Jason@zx2c4.com> wrote:
>>>>>> On Fri, Sep 28, 2018 at 10:49 AM Ard Biesheuvel
>>>>>> <ard.biesheuvel@linaro.org> wrote:
>>>>>>>>> +typedef enum {
>>>>>>>>> + HAVE_NO_SIMD = 1 << 0,
>>>>>>>>> + HAVE_FULL_SIMD = 1 << 1,
>>>>>>>>> + HAVE_SIMD_IN_USE = 1 << 31
>>>>>>>>> +} simd_context_t;
>>>>>>>>> +
>>>>>>>
>>>>>>> Oh, and another thing (and I'm surprised checkpatch.pl didn't complain
>>>>>>> about it): the use of typedef in new code is strongly discouraged.
>>>>>>> This policy predates my involvement, so perhaps Joe can elaborate on
>>>>>>> the rationale?
>>>>>>
>>>>>> In case it matters, the motivation for making this a typedef is I
>>>>>> could imagine this at some point turning into a more complicated
>>>>>> struct on certain platforms and that would make refactoring easier. I
>>>>>> could just make it `struct simd_context` now with 1 member though...
>>>>>
>>>>> Yes that makes sense
>>>>
>>>> The rationale for it being a typedef or moving to a struct now?
>>>
>>> Yes just switch to a struct.
>>
>> Okay. No problem with that, but will wait to hear from Joe first.
>
> Why do you need to hear from me again?
>
> As far as I know, the only info about typedef avoidance are in
> Documentation/process/coding-style.rst section 5.
>
>
I personally prefer it with the typedef. If this were my code, I’d say the coding style is silly for opaque tiny structs like this.
^ permalink raw reply
* Re: [PATCH] net: phy: Fix a unused function gcc warning.
From: zhong jiang @ 2018-09-30 1:31 UTC (permalink / raw)
To: Florian Fainelli; +Cc: davem, andrew, netdev, linux-kernel
In-Reply-To: <E3868752-29CA-4D84-9E09-C7E238AFEF9E@gmail.com>
On 2018/9/30 4:36, Florian Fainelli wrote:
>
> On September 28, 2018 10:11:43 PM PDT, zhong jiang <zhongjiang@huawei.com> wrote:
>> Fix the following compile warning:
>>
>> drivers/net/phy/mdio-bcm-unimac.c:321:12: warning:
>> 'unimac_mdio_suspend' defined but not used [-Wunused-function]
>> static int unimac_mdio_suspend(struct device *d)
>> ^
>> drivers/net/phy/mdio-bcm-unimac.c:330:12: warning: 'unimac_mdio_resume'
>> defined but not used [-Wunused-function]
>> static int unimac_mdio_resume(struct device *d)
>>
>> Signed-off-by: zhong jiang <zhongjiang@huawei.com>
> Thank you, Arnd already sent a patch for this which got accepted:
>
> https://patchwork.ozlabs.org/patch/975088/
Ok, Thanks, I miss that.
Sincerely,
zhong jiang
^ permalink raw reply
* Re: [PATCH] Documentation: Add HOWTO Korean translation into BPF and XDP Reference Guide.
From: Chang-an Song @ 2018-09-30 2:12 UTC (permalink / raw)
To: daniel; +Cc: Jonathan Corbet, tj, netdev, davem
In-Reply-To: <b668ce1e-3a2a-cd2a-da37-2e7c90a48cbe@iogearbox.net>
Hello Daniel, Jon
Thank you very much for review.
>That is a bit of a problem, since Apache v2 is not compatible with GPLv2.
>If the license of the document cannot be changed, I don't think we can
>accept it into the kernel tree.
Thank you for sharing information, Jon. I will check the rst file format
and the license of the document when I submit document at next time.
If I miss something, Please let me know and I will check the checklist, first.
>Alternative option could also be to integrate it into Cilium's doc given the
>original document is present there as well, so it could link to the Korean
>version from there.
Thank you for sharing about other ways, Daniel.
I will check the information you have provided, and then I am investigating
how to put the Korean version page, and I will proceed as soon as it
is completed.
BR/Leo
2018년 9월 27일 (목) 오전 6:19, Daniel Borkmann <daniel@iogearbox.net>님이 작성:
>
> On 09/26/2018 09:44 PM, Jonathan Corbet wrote:
> > On Wed, 26 Sep 2018 18:11:42 +0900
> > Chang-an Song <csongxdp@gmail.com> wrote:
> >
> >>> - The original document has a copyright assertion but no associated
> >>> license. Do we know what the license is? I assume it's something
> >>> that is free and GPL-compatible, but that would be good to know for
> >>> sure.
> >>
> >> 3. I asked to main author Daniel that apache 2.0 license for this document.
> >
> > That is a bit of a problem, since Apache v2 is not compatible with GPLv2.
> > If the license of the document cannot be changed, I don't think we can
> > accept it into the kernel tree.
>
> Alternative option could also be to integrate it into Cilium's doc given the
> original document is present there as well, so it could link to the Korean
> version from there.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox