* Re: [PATCH net-next v3] wireless-drivers: rtnetlink wifi simulation device
From: Sergey Matyukevich @ 2018-10-05 14:33 UTC (permalink / raw)
To: Cody Schuffelen
Cc: Johannes Berg, Kalle Valo, David S . Miller,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
kernel-team-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org
In-Reply-To: <20181004195906.201895-1-schuffelen-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
Hi Cody,
> drivers/net/wireless/Kconfig | 7 +
> drivers/net/wireless/Makefile | 2 +
> drivers/net/wireless/virt_wifi.c | 618 +++++++++++++++++++++++++++++++
> 3 files changed, 627 insertions(+)
> create mode 100644 drivers/net/wireless/virt_wifi.c
I did a quick check of your patch using checkpatch kernel tool,
here is a summary of its output:
$ ./scripts/checkpatch.pl --strict test.patch
...
total: 165 errors, 428 warnings, 9 checks, 634 lines checked
Most part of those complaints is about either whitespaces or code
idents. I am not sure whether this is a patch itself or email client.
So could you please take a look and run checkpatch on your side.
> +static void virt_wifi_scan_result(struct work_struct *work)
> +{
> + const union {
> + struct {
> + u8 tag;
> + u8 len;
> + u8 ssid[8];
> + } __packed parts;
> + u8 data[10];
> + } ssid = { .parts = {
> + .tag = WLAN_EID_SSID, .len = 8, .ssid = "VirtWifi" }
> + };
> + struct cfg80211_bss *informed_bss;
> + struct virt_wifi_priv *priv =
> + container_of(work, struct virt_wifi_priv,
> + scan_result.work);
> + struct wiphy *wiphy = priv_to_wiphy(priv);
> + struct cfg80211_inform_bss mock_inform_bss = {
> + .chan = &channel_5ghz,
> + .scan_width = NL80211_BSS_CHAN_WIDTH_20,
> + .signal = -60,
> + .boottime_ns = ktime_get_boot_ns(),
> + };
> + struct cfg80211_scan_info scan_info = {};
> +
> + informed_bss =
> + cfg80211_inform_bss_data(wiphy, &mock_inform_bss,
> + CFG80211_BSS_FTYPE_PRESP,
> + fake_router_bssid,
> + mock_inform_bss.boottime_ns,
> + WLAN_CAPABILITY_ESS, 0, ssid.data,
> + sizeof(ssid), GFP_KERNEL);
It is possible to simplify this part switching to cfg80211_inform_bss
function: this function wraps your scan data in into cfg80211_inform_bss
structure internally using some reasonable defaults, e.g. channel width.
Besides, signal strength for scan entries should be passed in mBm units,
so use DBM_TO_MBM macro. For instance, with your current code 'iw' tool
produces the following output:
$ sudo iw dev wlan0 scan
...
signal: 0.-60 dBm
...
> +static void virt_wifi_connect_complete(struct work_struct *work)
> +{
> + struct virt_wifi_priv *priv =
> + container_of(work, struct virt_wifi_priv, connect.work);
> + u8 *requested_bss = priv->connect_requested_bss;
> + bool has_addr = !is_zero_ether_addr(requested_bss);
> + bool right_addr = ether_addr_equal(requested_bss, fake_router_bssid);
> + u16 status = WLAN_STATUS_SUCCESS;
> +
> + rtnl_lock();
> + if (!priv->netdev_is_up || (has_addr && !right_addr))
> + status = WLAN_STATUS_UNSPECIFIED_FAILURE;
> + else
> + priv->is_connected = true;
> +
> + cfg80211_connect_result(priv->netdev, requested_bss, NULL, 0, NULL, 0,
> + status, GFP_KERNEL);
> + rtnl_unlock();
> +}
Carrier state for wireless device depends on its connection state.
E.g., carrier is set when wireless connection succeeds and cleared
when device disconnects. So use netif_carrier_on/netif_carrier_off
calls in connect/disconnect handlers to set correct carrier state.
IIUC the following locations look reasonable:
- netif_carrier_off on init
- netif_carrier_on in virt_wifi_connect_complete on success
- netif_carrier_off in virt_wifi_disconnect
> +static void virt_wifi_disconnect_complete(struct work_struct *work)
> +{
> + struct virt_wifi_priv *priv =
> + container_of(work, struct virt_wifi_priv, disconnect.work);
> +
> + cfg80211_disconnected(priv->netdev, priv->disconnect_reason, NULL, 0,
> + true, GFP_KERNEL);
> + priv->is_connected = false;
> +}
Why do you need delayed disconnect processing ? IIUC it can be dropped
and cfg80211_disconnected call can be moved to virt_wifi_disconnect.
> +
> +static int virt_wifi_get_station(struct wiphy *wiphy,
> + struct net_device *dev,
> + const u8 *mac,
> + struct station_info *sinfo)
> +{
> + wiphy_debug(wiphy, "get_station\n");
> +
> + if (!ether_addr_equal(mac, fake_router_bssid))
> + return -ENOENT;
> +
> + sinfo->filled = BIT(NL80211_STA_INFO_TX_PACKETS) |
> + BIT(NL80211_STA_INFO_TX_FAILED) | BIT(NL80211_STA_INFO_SIGNAL) |
> + BIT(NL80211_STA_INFO_TX_BITRATE);
Recently some of NL80211_STA_INFO_ attribute types has been modified to
use BIT_ULL macro. Could you please check commit 22d0d2fafca93ba1d92a
for details and modify your coded if needed.
> + sinfo->tx_packets = 1;
Only one packet, really ? Not sure if you plan to use the output of 'iw'
or any other tool. If yes, then it probably makes sense to use stats
from the original network link. Otherwise, your 'iw' output is
going to look like this:
$ iw dev wlan0 station dump
...
tx packets: 1
...
> + sinfo->tx_failed = 0;
...
> +static int virt_wifi_dump_station(struct wiphy *wiphy,
> + struct net_device *dev,
> + int idx,
> + u8 *mac,
> + struct station_info *sinfo)
> +{
> + wiphy_debug(wiphy, "dump_station\n");
> +
> + if (idx != 0)
> + return -ENOENT;
> +
> + ether_addr_copy(mac, fake_router_bssid);
> + return virt_wifi_get_station(wiphy, dev, fake_router_bssid, sinfo);
> +}
Callback dump_station should return AP data only when STA is connected.
Currently your driver returns fake AP data even when it is not
connected.
> +static const struct cfg80211_ops virt_wifi_cfg80211_ops = {
> + .scan = virt_wifi_scan,
> +
> + .connect = virt_wifi_connect,
> + .disconnect = virt_wifi_disconnect,
> +
> + .get_station = virt_wifi_get_station,
> + .dump_station = virt_wifi_dump_station,
> +};
Hey, this minimal cfg80211 implementation works fine with wpa_supplicant
and open AP config. By the way, if you plan to add more features, then
I would suggest to consider the following cfg80211 callbacks:
- change_station, get_channel
to provide more info in connected state, e.g. compare the output
of the following commands between your virtual interface and
actual wireless interface:
$ iw dev wlan0 link
$ iw dev wlan0 info
- stubs for add_key, del_key to enable encrypted AP simulation
Regards,
Sergey
^ permalink raw reply
* Re: [Patch net-next] net_sched: convert idrinfo->lock from spinlock to a mutex
From: David Miller @ 2018-10-05 7:38 UTC (permalink / raw)
To: xiyou.wangcong; +Cc: netdev, jiri, jhs, vladbu, idosch, jiri
In-Reply-To: <20181002195019.13522-1-xiyou.wangcong@gmail.com>
From: Cong Wang <xiyou.wangcong@gmail.com>
Date: Tue, 2 Oct 2018 12:50:19 -0700
> In commit ec3ed293e766 ("net_sched: change tcf_del_walker() to take idrinfo->lock")
> we move fl_hw_destroy_tmplt() to a workqueue to avoid blocking
> with the spinlock held. Unfortunately, this causes a lot of
> troubles here:
>
> 1. tcf_chain_destroy() could be called right after we queue the work
> but before the work runs. This is a use-after-free.
>
> 2. The chain refcnt is already 0, we can't even just hold it again.
> We can check refcnt==1 but it is ugly.
>
> 3. The chain with refcnt 0 is still visible in its block, which means
> it could be still found and used!
>
> 4. The block has a refcnt too, we can't hold it without introducing a
> proper API either.
>
> We can make it working but the end result is ugly. Instead of wasting
> time on reviewing it, let's just convert the troubling spinlock to
> a mutex, which allows us to use non-atomic allocations too.
>
> Fixes: ec3ed293e766 ("net_sched: change tcf_del_walker() to take idrinfo->lock")
> Reported-by: Ido Schimmel <idosch@idosch.org>
> Cc: Jamal Hadi Salim <jhs@mojatatu.com>
> Cc: Vlad Buslov <vladbu@mellanox.com>
> Cc: Jiri Pirko <jiri@mellanox.com>
> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Applied.
^ permalink raw reply
* Re: [PATCH 1/3] bpf: allow zero-initializing hash map seed
From: Lorenz Bauer @ 2018-10-05 7:42 UTC (permalink / raw)
To: jannh; +Cc: Alexei Starovoitov, Daniel Borkmann, netdev, linux-api
In-Reply-To: <CAG48ez0_BtXQ2KCgpRicQ8yfeNqV2mN8RKCA3nn8DXFTmsj6UA@mail.gmail.com>
On Tue, 2 Oct 2018 at 21:00, Jann Horn <jannh@google.com> wrote:
>
> If this is for testing only, you can slap a capable(CAP_SYS_ADMIN)
> check in here, right? I doubt it matters, but I don't really like
> seeing something like this exposed to unprivileged userspace just
> because you need it for kernel testing.
That would mean all tests have to run as root / with CAP_SYS_ADMIN
which isn't ideal.
--
Lorenz Bauer | Systems Engineer
25 Lavington St., London SE1 0NZ
www.cloudflare.com
^ permalink raw reply
* Re: [PATCH net] be2net: don't flip hw_features when VXLANs are added/deleted
From: David Miller @ 2018-10-05 7:59 UTC (permalink / raw)
To: dcaratti; +Cc: netdev, sriharsha.basavapatna, ajit.khaparde, sathya.perla, sd
In-Reply-To: <e296246a78d757683297fd6dbe073dcaa47e467d.1538572109.git.dcaratti@redhat.com>
From: Davide Caratti <dcaratti@redhat.com>
Date: Wed, 3 Oct 2018 15:20:58 +0200
> the be2net implementation of .ndo_tunnel_{add,del}() changes the value of
> NETIF_F_GSO_UDP_TUNNEL bit in 'features' and 'hw_features', but it forgets
> to call netdev_features_change(). Moreover, ethtool setting for that bit
> can potentially be reverted after a tunnel is added or removed.
>
> GSO already does software segmentation when 'hw_enc_features' is 0, even
> if VXLAN offload is turned on. In addition, commit 096de2f83ebc ("benet:
> stricter vxlan offloading check in be_features_check") avoids hardware
> segmentation of non-VXLAN tunneled packets, or VXLAN packets having wrong
> destination port. So, it's safe to avoid flipping the above feature on
> addition/deletion of VXLAN tunnels.
>
> Fixes: 630f4b70567f ("be2net: Export tunnel offloads only when a VxLAN tunnel is created")
> Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Applied, thank you.
^ permalink raw reply
* Re: KASAN: use-after-free Read in sctp_id2assoc
From: Marcelo Ricardo Leitner @ 2018-10-05 14:58 UTC (permalink / raw)
To: syzbot
Cc: davem, linux-kernel, linux-sctp, netdev, nhorman, syzkaller-bugs,
vyasevich
In-Reply-To: <0000000000007e767d05776336da@google.com>
On Thu, Oct 04, 2018 at 01:48:03AM -0700, syzbot wrote:
> Hello,
>
> syzbot found the following crash on:
>
> HEAD commit: 4e6d47206c32 tls: Add support for inplace records encryption
> git tree: net-next
> console output: https://syzkaller.appspot.com/x/log.txt?x=13834b81400000
> kernel config: https://syzkaller.appspot.com/x/.config?x=e569aa5632ebd436
> dashboard link: https://syzkaller.appspot.com/bug?extid=c7dd55d7aec49d48e49a
> compiler: gcc (GCC) 8.0.1 20180413 (experimental)
>
> Unfortunately, I don't have any reproducer for this crash yet.
>
> IMPORTANT: if you fix the bug, please add the following tag to the commit:
> Reported-by: syzbot+c7dd55d7aec49d48e49a@syzkaller.appspotmail.com
>
> netlink: 'syz-executor1': attribute type 1 has an invalid length.
> ==================================================================
> BUG: KASAN: use-after-free in sctp_id2assoc+0x3a7/0x3e0
> net/sctp/socket.c:276
> Read of size 8 at addr ffff880195b3eb20 by task syz-executor2/15454
>
> CPU: 1 PID: 15454 Comm: syz-executor2 Not tainted 4.19.0-rc5+ #242
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
> Google 01/01/2011
> Call Trace:
> __dump_stack lib/dump_stack.c:77 [inline]
> dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113
> print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256
> kasan_report_error mm/kasan/report.c:354 [inline]
> kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
> __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
> sctp_id2assoc+0x3a7/0x3e0 net/sctp/socket.c:276
I'm not seeing yet how this could happen.
All sockopts here are serialized by sock_lock.
do_peeloff here would create another socket, but the issue was
triggered before that.
The same function that freed this memory, also removes the entry from
idr mapping, so this entry shouldn't be there anymore.
I have only two theories so far:
- an issue with IDR/RCU.
- something else happened that just the call stacks are not revealing.
^ permalink raw reply
* Re: [PATCH v2] net: phy: phylink: fix SFP interface autodetection
From: David Miller @ 2018-10-05 8:05 UTC (permalink / raw)
To: baruch
Cc: andrew, f.fainelli, netdev, linux, antoine.tenart,
gregory.clement, ori.shemtov
In-Reply-To: <8b8a01c07bf9b85c09de2d6d6b08068d384e37b8.1538582689.git.baruch@tkos.co.il>
From: Baruch Siach <baruch@tkos.co.il>
Date: Wed, 3 Oct 2018 19:04:49 +0300
> When connecting SFP PHY to phylink use the detected interface.
> Otherwise, the link fails to come up when the configured 'phy-mode'
> differs from the SFP detected mode.
>
> Move most of phylink_connect_phy() into __phylink_connect_phy(), and
> leave phylink_connect_phy() as a wrapper. phylink_sfp_connect_phy() can
> now pass the SFP detected PHY interface to __phylink_connect_phy().
>
> This fixes 1GB SFP module link up on eth3 of the Macchiatobin board that
> is configured in the DT to "2500base-x" phy-mode.
>
> Fixes: 9525ae83959b6 ("phylink: add phylink infrastructure")
> Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
> ---
> v2: Leave the phylink_connect_phy() functionality unchanged. Only
> phylink_sfp_connect_phy() calls __phylink_connect_phy() with the
> detected interface (Russell King)
Applied and queued up for -stable.
^ permalink raw reply
* Re: [REPORT] net: 3com: 3c59x: Possible data races
From: Sebastian Andrzej Siewior @ 2018-10-05 15:04 UTC (permalink / raw)
To: Jia-Ju Bai
Cc: klassert, davem, anna-maria, nhorman, keescook, netdev,
Linux Kernel Mailing List
In-Reply-To: <412162cd-8fab-104b-ce73-6f70f108218f@gmail.com>
On 2018-10-03 21:52:14 [+0800], Jia-Ju Bai wrote:
> ****** Possible race0 ******
> CPU0:
> vortex_boomerang_interrupt
> line 2510: spin_lock_irqsave()
> _boomerang_interrupt
> line 2432: vp->tx_skbuff[entry] [READ]
> line 2433: vp->tx_skbuff[entry] [READ]
> line 2453: vp->tx_skbuff[entry] = NULL [WRITE]
>
> CPU1:
> boomerang_start_xmit
> line 2145: vp->tx_skbuff[entry] = skb [WRITE]
>
> As for vp->tx_skbuff[entry], the WRITE and READ operations in CPU0
> are performed with holding a spinlock, but the WRITE operation in CPU1
> is performed without holding this spinlock, so there may exist data races.
not really. One side fills the ring buffer (cur_tx++) and the other side
purges it (dirty_tx++). Don't see a overlap here.
> ****** Possible race1 ******
> CPU0:
> vortex_boomerang_interrupt
> line 2510: spin_lock_irqsave()
> _boomerang_interrupt
> line 2421: vp->dirty_tx = dirty_tx [WRITE]
>
> CPU1:
> boomerang_start_xmit
> line 2137: vp->dirty_tx [READ]
>
> As for vp->dirty_tx, the WRITE operation in CPU0 is performed
> with holding a spinlock, but the READ operation in CPU1 is performed
> without holding this spinlock, so there may exist a data race.
basically the same thing as race0
> ****** Possible race2 ******
> CPU0:
> vortex_boomerang_interrupt
> line 2510: spin_lock_irqsave()
> _boomerang_interrupt
> line 2381: vp->handling_irq = 1 [WRITE]
> line 2498: vp->handling_irq = 0 [WRITE]
>
> CPU1:
> boomerang_start_xmit
> line 2134: vp->handling_irq [READ]
>
> As for vp->handling_irq, the WRITE operations in CPU0 are performed
> with holding a spinlock, but the READ operation in CPU1 is performed
> without holding this spinlock, so there may exist data races.
It might but it is not serious. As the comment explains, if CPU1 would
miss to then it would spin the lock while CPU0 would deadlock.
However, I doubt that this happens because the core should hold the
queue lock.
> ****** Possible race3 ******
> CPU0:
> vortex_boomerang_interrupt
> line 2510: spin_lock_irqsave()
> _boomerang_interrupt
> boomerang_rx
> line 2669: skb->ip_summed = ... [WRITE]
>
> CPU1:
> boomerang_start_xmit
> line 2149: skb->ip_summed [READ]
>
> As for skb->ip_summed, the WRITE operation in CPU0 is performed
> with holding a spinlock, but the READ operation in CPU1 is performed
> without holding this spinlock, so there may exist data races.
This race would exist if the skb would be simultaneously on RX and TX
side. Otherwise we good.
>
> These possible races are detected by a runtime testing.
Could you please define runtime testing? Did something happen or did you
just instrument the code and assumed that it might happen?cG
> A possible fix of these races is protecting the code in
> boomerang_start_xmit()
> using the spinlock in vortex_boomerang_interrupt().
> But I am not sure whether this fix is correct, so I only report these races.
Okay. As explained above, I don't think the races are real.
> Best wishes,
> Jia-Ju Bai
Sebastian
^ permalink raw reply
* [PATCH net-next] selftests: net: Clean up an unused variable
From: Jakub Sitnicki @ 2018-10-05 8:19 UTC (permalink / raw)
To: netdev
Address compiler warning:
ip_defrag.c: In function 'send_udp_frags':
ip_defrag.c:206:16: warning: unused variable 'udphdr' [-Wunused-variable]
struct udphdr udphdr;
^~~~~~
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
---
tools/testing/selftests/net/ip_defrag.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/tools/testing/selftests/net/ip_defrag.c b/tools/testing/selftests/net/ip_defrag.c
index 2366dc6bce71..61ae2782388e 100644
--- a/tools/testing/selftests/net/ip_defrag.c
+++ b/tools/testing/selftests/net/ip_defrag.c
@@ -203,7 +203,6 @@ static void send_udp_frags(int fd_raw, struct sockaddr *addr,
{
struct ip *iphdr = (struct ip *)ip_frame;
struct ip6_hdr *ip6hdr = (struct ip6_hdr *)ip_frame;
- struct udphdr udphdr;
int res;
int offset;
int frag_len;
--
2.17.1
^ permalink raw reply related
* [PATCH net] net: bpfilter: Fix type cast and pointer warnings
From: Shanthosh RK @ 2018-10-05 15:27 UTC (permalink / raw)
To: netdev, linux-kernel; +Cc: davem
Fixes the following Sparse warnings:
net/bpfilter/bpfilter_kern.c:62:21: warning: cast removes address space
of expression
net/bpfilter/bpfilter_kern.c:101:49: warning: Using plain integer as
NULL pointer
Signed-off-by: Shanthosh RK <shanthosh.rk@gmail.com>
---
net/bpfilter/bpfilter_kern.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/bpfilter/bpfilter_kern.c b/net/bpfilter/bpfilter_kern.c
index f0fc182d3db7..b64e1649993b 100644
--- a/net/bpfilter/bpfilter_kern.c
+++ b/net/bpfilter/bpfilter_kern.c
@@ -59,7 +59,7 @@ static int __bpfilter_process_sockopt(struct sock *sk, int optname,
req.is_set = is_set;
req.pid = current->pid;
req.cmd = optname;
- req.addr = (long)optval;
+ req.addr = (long __force __user)optval;
req.len = optlen;
mutex_lock(&bpfilter_lock);
if (!info.pid)
@@ -98,7 +98,7 @@ static int __init load_umh(void)
pr_info("Loaded bpfilter_umh pid %d\n", info.pid);
/* health check that usermode process started correctly */
- if (__bpfilter_process_sockopt(NULL, 0, 0, 0, 0) != 0) {
+ if (__bpfilter_process_sockopt(NULL, 0, NULL, 0, 0) != 0) {
stop_umh();
return -EFAULT;
}
--
2.11.0
^ permalink raw reply related
* Re: [PATCH 3/3] iwlwifi: Load firmware exclusively for Intel WiFi
From: Kai Heng Feng @ 2018-10-05 8:30 UTC (permalink / raw)
To: Marcel Holtmann
Cc: Matt Chen, Luciano Coelho, LKML, Johannes Berg,
Grumbach, Emmanuel, linuxwifi, Kalle Valo, David S. Miller,
linux-wireless, netdev
In-Reply-To: <910F8A29-3141-422F-87EE-7BFBCDE9060C@holtmann.org>
Hi Marcel,
> On Oct 4, 2018, at 2:25 AM, Marcel Holtmann <marcel@holtmann.org> wrote:
>
> Hi Kai-Heng,
>
>>> I think Canonical were facing some wifi fw load error from some 8260
>>> earlier module during the BT still loading the fw.
>>> I believe we had later 8260 sku that fixed this issue.
>>
>> But there are already 8260 that is affected by this bug in the wild.
>>
>> Search "Bluetooth: hci0: Failed to send firmware data (-38)” and there are lots of user are affected.
>
> which SKUs are these actually. What are the initial details about the boot loader. For the Bluetooth side, you should be able to grab them from dmesg or by running btmon.
Here’s the dmesg | grep Bluetooth:
[ 6.086600] Bluetooth: Core ver 2.22
[ 6.086618] Bluetooth: HCI device and connection manager initialized
[ 6.086621] Bluetooth: HCI socket layer initialized
[ 6.086625] Bluetooth: L2CAP socket layer initialized
[ 6.086632] Bluetooth: SCO socket layer initialized
[ 6.107794] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 6.112803] Bluetooth: hci0: Device revision is 5
[ 6.112805] Bluetooth: hci0: Secure boot is enabled
[ 6.112805] Bluetooth: hci0: OTP lock is enabled
[ 6.112806] Bluetooth: hci0: API lock is enabled
[ 6.112807] Bluetooth: hci0: Debug lock is disabled
[ 6.112808] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 6.115231] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 6.210353] Bluetooth: hci0: Failed to send firmware data (-38)
[ 8.153357] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.153358] Bluetooth: BNEP filters: protocol multicast
[ 8.153362] Bluetooth: BNEP socket layer initialized
[ 13.563790] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 13.568806] Bluetooth: hci0: Device revision is 5
[ 13.568808] Bluetooth: hci0: Secure boot is enabled
[ 13.568809] Bluetooth: hci0: OTP lock is enabled
[ 13.568810] Bluetooth: hci0: API lock is enabled
[ 13.568811] Bluetooth: hci0: Debug lock is disabled
[ 13.568813] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 13.569072] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 15.220327] Bluetooth: hci0: Waiting for firmware download to complete
[ 15.220805] Bluetooth: hci0: Firmware loaded in 1618764 usecs
[ 15.220877] Bluetooth: hci0: Waiting for device to boot
[ 15.233031] Bluetooth: hci0: Device booted in 11881 usecs
[ 15.233274] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[ 15.236794] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 17.232497] Bluetooth: RFCOMM TTY layer initialized
[ 17.232505] Bluetooth: RFCOMM socket layer initialized
[ 17.232510] Bluetooth: RFCOMM ver 1.11
I’ll file a Bugzilla if we need full dmesg as attachment.
>
> So I am not in favor of this kind of hack and creating dependencies between drivers. If you only have a hammer, then everything looks like a nail. And this is a massive hammer trying to squash everything. This problem needs to be debugged. And this starts by providing affected SKU information and firmware information. So get the details about the SKU and its Bluetooth and WiFi boot loaders.
Apology for the hammer approach, which is the best way I can think of. Of course it’s much better if we can solve this without the ugly hack.
Kai-Heng
>
> Regards
>
> Marcel
>
^ permalink raw reply
* Re: [PATCH iproute2 net-next v2 2/6] include: Add helper to retrieve a __s64 from a netlink msg
From: Ilias Apalodimas @ 2018-10-05 8:41 UTC (permalink / raw)
To: Vinicius Costa Gomes
Cc: netdev, jhs, xiyou.wangcong, jiri, jesus.sanchez-palencia,
simon.fok
In-Reply-To: <20181004231711.6058-3-vinicius.gomes@intel.com>
On Thu, Oct 04, 2018 at 04:17:07PM -0700, Vinicius Costa Gomes wrote:
> This allows signed 64-bit integers to be retrieved from a netlink
> message.
> ---
> include/libnetlink.h | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/include/libnetlink.h b/include/libnetlink.h
> index 9d9249e6..88164975 100644
> --- a/include/libnetlink.h
> +++ b/include/libnetlink.h
> @@ -185,6 +185,13 @@ static inline __u64 rta_getattr_u64(const struct rtattr *rta)
> memcpy(&tmp, RTA_DATA(rta), sizeof(__u64));
> return tmp;
> }
> +static inline __s64 rta_getattr_s64(const struct rtattr *rta)
> +{
> + __s64 tmp;
> +
> + memcpy(&tmp, RTA_DATA(rta), sizeof(__s64));
Maybe change it to sizeof(tmp)?
> + return tmp;
> +}
> static inline const char *rta_getattr_str(const struct rtattr *rta)
> {
> return (const char *)RTA_DATA(rta);
> --
> 2.19.0
>
^ permalink raw reply
* Re: linux-next: Tree for Oct 5 (net/core/filter.c)
From: Randy Dunlap @ 2018-10-05 15:42 UTC (permalink / raw)
To: Stephen Rothwell, Linux-Next Mailing List
Cc: Linux Kernel Mailing List, netdev@vger.kernel.org,
Alexei Starovoitov, Daniel Borkmann
In-Reply-To: <20181005163943.3f8d4f32@canb.auug.org.au>
[-- Attachment #1: Type: text/plain, Size: 766 bytes --]
On 10/4/18 11:39 PM, Stephen Rothwell wrote:
> Hi all,
>
> Changes since 20181004:
>
on i386 or x86_64:
net/core/filter.o: In function `bpf_sk_release':
filter.c:(.text+0x3c5c): undefined reference to `sock_gen_put'
net/core/filter.o: In function `sk_lookup':
filter.c:(.text+0x79a5): undefined reference to `tcp_hashinfo'
filter.c:(.text+0x79bc): undefined reference to `__inet_lookup_established'
filter.c:(.text+0x79eb): undefined reference to `tcp_hashinfo'
filter.c:(.text+0x79f3): undefined reference to `__inet_lookup_listener'
filter.c:(.text+0x7a14): undefined reference to `udp_table'
filter.c:(.text+0x7a26): undefined reference to `__udp4_lib_lookup'
Full randconfig file is attached.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
--
~Randy
[-- Attachment #2: config-r2130 --]
[-- Type: text/plain, Size: 90559 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.19.0-rc6 Kernel Configuration
#
#
# Compiler: gcc (SUSE Linux) 4.8.5
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=40805
CONFIG_CLANG_VERSION=0
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_PSI=y
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_FORCE=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_RCU_BOOST is not set
CONFIG_RCU_NOCB_CPU=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
# CONFIG_NUMA_BALANCING_DEFAULT_ENABLED is not set
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
# CONFIG_MULTIUSER is not set
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_FHANDLE is not set
CONFIG_POSIX_TIMERS=y
# CONFIG_PRINTK is not set
# CONFIG_BUG is not set
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
# CONFIG_AIO is not set
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SLUB_CPU_PARTIAL is not set
# CONFIG_PROFILING is not set
CONFIG_GENERIC_CMDLINE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_HWEIGHT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_KASAN_SHADOW_OFFSET=0xdffffc0000000000
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_MPPARSE=y
CONFIG_GOLDFISH=y
# CONFIG_RETPOLINE is not set
# CONFIG_INTEL_RDT is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_DMI is not set
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
# CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_SCHED_MC_PRIO is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
#
# Performance monitoring
#
# CONFIG_PERF_EVENTS_INTEL_UNCORE is not set
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_X86_16BIT is not set
# CONFIG_X86_VSYSCALL_EMULATION is not set
CONFIG_I8K=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_X86_CPA_STATISTICS=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
# CONFIG_ARCH_RANDOM is not set
# CONFIG_X86_SMAP is not set
# CONFIG_X86_INTEL_UMIP is not set
CONFIG_X86_INTEL_MPX=y
# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
# CONFIG_SECCOMP is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
CONFIG_DEBUG_HOTPLUG_CPU0=y
# CONFIG_LEGACY_VSYSCALL_EMULATE is not set
CONFIG_LEGACY_VSYSCALL_NONE=y
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_ARCH_SUPPORTS_ACPI=y
# CONFIG_ACPI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_PTM=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_QUIRKS is not set
CONFIG_PCI_DEBUG=y
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI controller drivers
#
#
# Cadence PCIe controllers support
#
# CONFIG_PCIE_CADENCE_HOST is not set
# CONFIG_PCI_FTPCI100 is not set
CONFIG_PCI_HOST_COMMON=y
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCIE_XILINX=y
CONFIG_PCI_XGENE=y
# CONFIG_PCI_V3_SEMI is not set
# CONFIG_PCIE_ALTERA is not set
CONFIG_PCI_HOST_THUNDER_PEM=y
# CONFIG_PCI_HOST_THUNDER_ECAM is not set
#
# DesignWare PCI Core Support
#
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
# CONFIG_ISA_BUS is not set
# CONFIG_ISA_DMA_API is not set
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
# CONFIG_RAPIDIO_DMA_ENGINE is not set
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_ENUM_BASIC=y
# CONFIG_RAPIDIO_CHMAN is not set
CONFIG_RAPIDIO_MPORT_CDEV=y
#
# RapidIO Switch drivers
#
# CONFIG_RAPIDIO_TSI57X is not set
# CONFIG_RAPIDIO_CPS_XX is not set
CONFIG_RAPIDIO_TSI568=y
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_RAPIDIO_RXS_GEN3=y
CONFIG_X86_SYSFB=y
#
# Binary Emulations
#
# CONFIG_IA32_EMULATION is not set
CONFIG_X86_X32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_HAVE_GENERIC_GUP=y
#
# Firmware Drivers
#
# CONFIG_ARM_SCMI_POWER_DOMAIN is not set
# CONFIG_ARM_SCPI_POWER_DOMAIN is not set
CONFIG_EDD=y
CONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_FW_CFG_SYSFS is not set
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_COREBOOT_TABLE=y
# CONFIG_GOOGLE_MEMCONSOLE_COREBOOT is not set
# CONFIG_GOOGLE_VPD is not set
#
# Tegra firmware driver
#
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_ISA_BUS_API=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_REFCOUNT=y
# CONFIG_REFCOUNT_FULL is not set
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
# CONFIG_BLOCK is not set
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
# CONFIG_COREDUMP is not set
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_CLEANCACHE=y
# CONFIG_CMA is not set
CONFIG_ZPOOL=y
# CONFIG_ZBUD is not set
CONFIG_Z3FOLD=y
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_ZONE_DEVICE=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_BENCHMARK is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=y
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_CBS=y
CONFIG_NET_SCH_ETF=y
CONFIG_NET_SCH_TAPRIO=y
CONFIG_NET_SCH_GRED=y
# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
# CONFIG_NET_SCH_QFQ is not set
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=y
CONFIG_NET_SCH_FQ=y
# CONFIG_NET_SCH_HHF is not set
CONFIG_NET_SCH_PIE=y
# CONFIG_NET_SCH_PLUG is not set
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
# CONFIG_DEFAULT_FQ_CODEL is not set
CONFIG_DEFAULT_SFQ=y
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="sfq"
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_BPF=y
# CONFIG_NET_CLS_FLOWER is not set
CONFIG_NET_CLS_MATCHALL=y
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_BATMAN_V is not set
# CONFIG_BATMAN_ADV_NC is not set
# CONFIG_BATMAN_ADV_DEBUGFS is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
CONFIG_NET_NSH=y
CONFIG_HSR=y
# CONFIG_QRTR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=y
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
CONFIG_6PACK=y
CONFIG_BPQETHER=y
# CONFIG_BAYCOM_SER_FDX is not set
CONFIG_BAYCOM_SER_HDX=y
# CONFIG_BAYCOM_PAR is not set
# CONFIG_YAM is not set
# CONFIG_CAN is not set
CONFIG_BT=y
CONFIG_BT_BREDR=y
# CONFIG_BT_RFCOMM is not set
CONFIG_BT_BNEP=y
# CONFIG_BT_BNEP_MC_FILTER is not set
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y
# CONFIG_BT_HS is not set
CONFIG_BT_LE=y
CONFIG_BT_LEDS=y
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
# CONFIG_BT_QCOMSMD is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_UART=y
CONFIG_NFC_HCI=y
# CONFIG_NFC_SHDLC is not set
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_MEI_PHY=y
CONFIG_NFC_FDP=y
# CONFIG_NFC_PN544_MEI is not set
CONFIG_NFC_PN533=y
CONFIG_NFC_PN533_USB=y
CONFIG_NFC_MICROREAD=y
CONFIG_NFC_MICROREAD_MEI=y
CONFIG_NFC_MRVL=y
# CONFIG_NFC_MRVL_USB is not set
CONFIG_NFC_MRVL_UART=y
CONFIG_NFC_NXP_NCI=y
CONFIG_PSAMPLE=y
CONFIG_NET_IFE=y
# CONFIG_LWTUNNEL is not set
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_FAILOVER=y
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_WANT_DEV_COREDUMP=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
#
# Bus devices
#
# CONFIG_QCOM_EBI2 is not set
# CONFIG_SIMPLE_PM_BUS is not set
CONFIG_FSL_MC_BUS=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_GNSS is not set
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
CONFIG_MTD_AR7_PARTS=y
CONFIG_MTD_BCM63XX_PARTS=y
#
# Partition parsers
#
# CONFIG_MTD_PARSER_TRX is not set
# CONFIG_MTD_SHARPSL_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
CONFIG_MTD_TS5500=y
CONFIG_MTD_AMD76XROM=y
CONFIG_MTD_ICHXROM=y
CONFIG_MTD_ESB2ROM=y
# CONFIG_MTD_CK804XROM is not set
CONFIG_MTD_SCB2_FLASH=y
CONFIG_MTD_NETtel=y
# CONFIG_MTD_L440GX is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=y
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_GENERIC=y
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_BCH is not set
CONFIG_MTD_SM_COMMON=y
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_DENALI_DT=y
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_OMAP2=y
# CONFIG_MTD_NAND_OMAP_BCH is not set
CONFIG_MTD_NAND_RICOH=y
# CONFIG_MTD_NAND_TANGO is not set
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_SHARPSL=y
CONFIG_MTD_NAND_CAFE=y
# CONFIG_MTD_NAND_ATMEL is not set
CONFIG_MTD_NAND_MARVELL=y
CONFIG_MTD_NAND_SLC_LPC32XX=y
# CONFIG_MTD_NAND_MLC_LPC32XX is not set
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_GPMI_NAND=y
CONFIG_MTD_NAND_BRCMNAND=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_OXNAS=y
CONFIG_MTD_NAND_FSL_IFC=y
# CONFIG_MTD_NAND_VF610_NFC is not set
CONFIG_MTD_NAND_MXC=y
# CONFIG_MTD_NAND_SH_FLCTL is not set
# CONFIG_MTD_NAND_DAVINCI is not set
CONFIG_MTD_NAND_TXX9NDFMC=y
CONFIG_MTD_NAND_NUC900=y
CONFIG_MTD_NAND_JZ4740=y
CONFIG_MTD_NAND_JZ4780=y
CONFIG_MTD_NAND_FSMC=y
CONFIG_MTD_NAND_SUNXI=y
CONFIG_MTD_NAND_HISI504=y
CONFIG_MTD_NAND_QCOM=y
CONFIG_MTD_NAND_MTK=y
CONFIG_MTD_NAND_TEGRA=y
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_MT81xx_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
CONFIG_SPI_ASPEED_SMC=y
CONFIG_SPI_CADENCE_QUADSPI=y
# CONFIG_SPI_FSL_QUADSPI is not set
CONFIG_SPI_HISI_SFC=y
CONFIG_SPI_NXP_SPIFI=y
CONFIG_SPI_INTEL_SPI=y
CONFIG_SPI_INTEL_SPI_PCI=y
# CONFIG_SPI_INTEL_SPI_PLATFORM is not set
CONFIG_SPI_STM32_QUADSPI=y
# CONFIG_MTD_UBI is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_PC_FIFO is not set
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
#
# NVME Support
#
#
# Misc devices
#
CONFIG_DUMMY_IRQ=y
CONFIG_IBM_ASM=y
# CONFIG_PHANTOM is not set
CONFIG_INTEL_MID_PTI=y
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=y
# CONFIG_HP_ILO is not set
CONFIG_QCOM_COINCELL=y
# CONFIG_PCH_PHUB is not set
CONFIG_SRAM=y
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
CONFIG_PCI_ENDPOINT_TEST=y
CONFIG_MISC_RTSX=y
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
#
# Altera FPGA firmware download module (requires I2C)
#
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
CONFIG_INTEL_MEI_TXE=y
CONFIG_VMWARE_VMCI=y
#
# Intel MIC & related support
#
#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set
#
# SCIF Bus Driver
#
CONFIG_SCIF_BUS=y
#
# VOP Bus Driver
#
CONFIG_VOP_BUS=y
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
CONFIG_VOP=y
CONFIG_VHOST_RING=y
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
CONFIG_MISC_RTSX_PCI=y
# CONFIG_MISC_RTSX_USB is not set
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_CORE is not set
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
# CONFIG_ARCNET_1051 is not set
CONFIG_ARCNET_RAW=y
CONFIG_ARCNET_CAP=y
# CONFIG_ARCNET_COM90xx is not set
# CONFIG_ARCNET_COM90xxIO is not set
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_PCI=y
# CONFIG_ATM_DRIVERS is not set
#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=y
# CONFIG_CAIF_SPI_SLAVE is not set
CONFIG_CAIF_HSI=y
CONFIG_CAIF_VIRTIO=y
# CONFIG_ETHERNET is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
# CONFIG_MDIO_BCM_IPROC is not set
CONFIG_MDIO_BCM_UNIMAC=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_MDIO_BUS_MUX=y
CONFIG_MDIO_BUS_MUX_BCM_IPROC=y
# CONFIG_MDIO_BUS_MUX_GPIO is not set
CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_MDIO_CAVIUM=y
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_MOXART is not set
CONFIG_MDIO_MSCC_MIIM=y
CONFIG_MDIO_OCTEON=y
# CONFIG_MDIO_SUN4I is not set
CONFIG_MDIO_THUNDER=y
CONFIG_MDIO_XGENE=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
#
# MII PHY device drivers
#
CONFIG_AMD_PHY=y
CONFIG_AQUANTIA_PHY=y
# CONFIG_ASIX_PHY is not set
CONFIG_AT803X_PHY=y
CONFIG_BCM63XX_PHY=y
CONFIG_BCM7XXX_PHY=y
# CONFIG_BCM87XX_PHY is not set
CONFIG_BCM_NET_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_CICADA_PHY is not set
CONFIG_CORTINA_PHY=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
CONFIG_DP83848_PHY=y
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_ICPLUS_PHY=y
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_LSI_ET1011C_PHY=y
# CONFIG_LXT_PHY is not set
CONFIG_MARVELL_PHY=y
CONFIG_MARVELL_10G_PHY=y
# CONFIG_MESON_GXL_PHY is not set
CONFIG_MICREL_PHY=y
# CONFIG_MICROCHIP_PHY is not set
CONFIG_MICROCHIP_T1_PHY=y
# CONFIG_MICROSEMI_PHY is not set
CONFIG_NATIONAL_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not set
CONFIG_RENESAS_PHY=y
# CONFIG_ROCKCHIP_PHY is not set
CONFIG_SMSC_PHY=y
CONFIG_STE10XP=y
# CONFIG_TERANETICS_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
CONFIG_PLIP=y
# CONFIG_PPP is not set
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_USB_NET_DRIVERS is not set
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
# CONFIG_WLAN_VENDOR_ADMTEK is not set
# CONFIG_WLAN_VENDOR_ATH is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_WLAN_VENDOR_BROADCOM is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_WLAN_VENDOR_INTEL is not set
# CONFIG_WLAN_VENDOR_INTERSIL is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_WLAN_VENDOR_REALTEK is not set
# CONFIG_WLAN_VENDOR_RSI is not set
# CONFIG_WLAN_VENDOR_ST is not set
# CONFIG_WLAN_VENDOR_TI is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_WLAN_VENDOR_QUANTENNA is not set
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=y
CONFIG_WIMAX_I2400M_USB=y
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
CONFIG_WAN=y
# CONFIG_HDLC is not set
CONFIG_DLCI=y
CONFIG_DLCI_MAX=8
# CONFIG_LAPBETHER is not set
CONFIG_X25_ASY=y
CONFIG_SBNI=y
CONFIG_SBNI_MULTILINE=y
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_E3X0_BUTTON=y
# CONFIG_INPUT_PM8XXX_VIBRATOR is not set
CONFIG_INPUT_PMIC8XXX_PWRKEY=y
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_DECODER=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_REGULATOR_HAPTIC=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_IMS_PCU=y
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_HISI_POWERKEY is not set
# CONFIG_INPUT_SC27XX_VIBRA is not set
CONFIG_RMI4_CORE=y
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
# CONFIG_RMI4_F11 is not set
# CONFIG_RMI4_F12 is not set
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
CONFIG_SERIO_OLPC_APSP=y
# CONFIG_SERIO_SUN4I_PS2 is not set
CONFIG_SERIO_GPIO_PS2=y
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_N_GSM=y
CONFIG_TRACE_ROUTER=y
CONFIG_TRACE_SINK=y
# CONFIG_GOLDFISH_TTY is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_FINTEK=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_DMA is not set
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_MEN_MCB=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_ASPEED_VUART=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPC18XX=y
CONFIG_SERIAL_8250_UNIPHIER=y
CONFIG_SERIAL_8250_INGENIC=y
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_MOXA=y
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_ATMEL is not set
# CONFIG_SERIAL_CLPS711X is not set
CONFIG_SERIAL_IMX=y
# CONFIG_SERIAL_IMX_CONSOLE is not set
CONFIG_SERIAL_UARTLITE=y
# CONFIG_SERIAL_UARTLITE_CONSOLE is not set
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=2
# CONFIG_SERIAL_SH_SCI_CONSOLE is not set
# CONFIG_SERIAL_SH_SCI_EARLYCON is not set
CONFIG_SERIAL_SH_SCI_DMA=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
# CONFIG_SERIAL_SCCNXP is not set
CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_ALTERA_UART_CONSOLE is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_MXS_AUART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_MPS2_UART is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
CONFIG_SERIAL_ST_ASC=y
# CONFIG_SERIAL_ST_ASC_CONSOLE is not set
CONFIG_SERIAL_MEN_Z135=y
CONFIG_SERIAL_STM32=y
# CONFIG_SERIAL_STM32_CONSOLE is not set
CONFIG_SERIAL_MVEBU_UART=y
# CONFIG_SERIAL_MVEBU_CONSOLE is not set
# CONFIG_SERIAL_OWL is not set
CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_TTY_PRINTK=y
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
# CONFIG_IPMI_SSIF is not set
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=y
CONFIG_IPMI_KCS_BMC=y
CONFIG_ASPEED_KCS_IPMI_BMC=y
CONFIG_NPCM7XX_KCS_IPMI_BMC=y
# CONFIG_ASPEED_BT_IPMI_BMC is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_R3964=y
CONFIG_APPLICOM=y
# CONFIG_MWAVE is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y
CONFIG_RANDOM_TRUST_CPU=y
#
# I2C support
#
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_PARPORT=y
CONFIG_PPS_CLIENT_GPIO=y
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=y
# CONFIG_PINCTRL is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
CONFIG_GPIO_ALTERA=y
# CONFIG_GPIO_ASPEED is not set
CONFIG_GPIO_ATH79=y
CONFIG_GPIO_RASPBERRYPI_EXP=y
# CONFIG_GPIO_BCM_KONA is not set
# CONFIG_GPIO_BRCMSTB is not set
# CONFIG_GPIO_CLPS711X is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EIC_SPRD is not set
CONFIG_GPIO_EM=y
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_GRGPIO is not set
CONFIG_GPIO_HLWD=y
CONFIG_GPIO_ICH=y
CONFIG_GPIO_IOP=y
# CONFIG_GPIO_LPC18XX is not set
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=y
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
CONFIG_GPIO_PMIC_EIC_SPRD=y
# CONFIG_GPIO_RCAR is not set
CONFIG_GPIO_SPRD=y
CONFIG_GPIO_SYSCON=y
# CONFIG_GPIO_TEGRA is not set
CONFIG_GPIO_TEGRA186=y
CONFIG_GPIO_TS4800=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_GPIO_VX855=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_XLP=y
CONFIG_GPIO_ZX=y
#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_104_DIO_48E is not set
CONFIG_GPIO_104_IDIO_16=y
# CONFIG_GPIO_104_IDI_48 is not set
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_GPIO_MM is not set
# CONFIG_GPIO_IT87 is not set
CONFIG_GPIO_SCH=y
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_TS5500=y
# CONFIG_GPIO_WINBOND is not set
CONFIG_GPIO_WS16C48=y
#
# MFD GPIO expanders
#
CONFIG_GPIO_CS5535=y
CONFIG_GPIO_DLN2=y
CONFIG_GPIO_JANZ_TTL=y
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_TIMBERDALE=y
#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_PCH=y
CONFIG_GPIO_PCI_IDIO_16=y
CONFIG_GPIO_PCIE_IDIO_24=y
# CONFIG_GPIO_RDC321X is not set
CONFIG_GPIO_SODAVILLE=y
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=y
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_MXC is not set
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2805 is not set
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=y
CONFIG_W1_SLAVE_DS2780=y
# CONFIG_W1_SLAVE_DS2781 is not set
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_POWER_AVS=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_BRCMKONA=y
CONFIG_POWER_RESET_BRCMSTB=y
CONFIG_POWER_RESET_GEMINI_POWEROFF=y
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
CONFIG_POWER_RESET_OCELOT_RESET=y
CONFIG_POWER_RESET_PIIX4_POWEROFF=y
CONFIG_POWER_RESET_LTC2952=y
CONFIG_POWER_RESET_RESTART=y
# CONFIG_POWER_RESET_KEYSTONE is not set
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
CONFIG_POWER_RESET_RMOBILE=y
CONFIG_POWER_RESET_ZX=y
CONFIG_REBOOT_MODE=y
CONFIG_SYSCON_REBOOT_MODE=y
# CONFIG_POWER_RESET_SC27XX is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not set
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_LEGO_EV3 is not set
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_HDQ=y
# CONFIG_BATTERY_MAX1721X is not set
CONFIG_CHARGER_ISP1704=y
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_GPIO=y
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_LTC3651=y
# CONFIG_CHARGER_QCOM_SMBB is not set
CONFIG_BATTERY_GOLDFISH=y
CONFIG_CHARGER_CROS_USBPD=y
CONFIG_CHARGER_SC2731=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
CONFIG_SENSORS_K8TEMP=y
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
CONFIG_SENSORS_APPLESMC=y
CONFIG_SENSORS_ASPEED=y
CONFIG_SENSORS_DELL_SMM=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_I5500=y
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
CONFIG_SENSORS_NPCM7XX=y
CONFIG_SENSORS_NSA320=y
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_RASPBERRYPI_HWMON=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=y
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
CONFIG_MFD_SUN4I_GPADC=y
CONFIG_MFD_AT91_USART=y
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_CHARDEV=y
# CONFIG_MFD_MADERA is not set
CONFIG_MFD_DLN2=y
# CONFIG_MFD_EXYNOS_LPASS is not set
CONFIG_MFD_MXS_LRADC=y
CONFIG_MFD_MX25_TSADC=y
# CONFIG_MFD_HI6421_PMIC is not set
CONFIG_MFD_HI655X_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_PCI=y
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_PM8XXX=y
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_SM501 is not set
CONFIG_ABX500_CORE=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_TIMBERDALE=y
CONFIG_MFD_VX855=y
CONFIG_MFD_STM32_LPTIMER=y
CONFIG_MFD_STM32_TIMERS=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_ANATOP=y
# CONFIG_REGULATOR_GPIO is not set
CONFIG_REGULATOR_HI655X=y
# CONFIG_REGULATOR_MT6323 is not set
CONFIG_REGULATOR_MT6397=y
# CONFIG_REGULATOR_PBIAS is not set
# CONFIG_REGULATOR_QCOM_RPMH is not set
CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_SC2731=y
# CONFIG_REGULATOR_STM32_VREFBUF is not set
CONFIG_REGULATOR_STW481X_VMMC=y
# CONFIG_REGULATOR_UNIPHIER is not set
# CONFIG_REGULATOR_VCTRL is not set
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_IMX_IPUV3_CORE is not set
# CONFIG_DRM is not set
# CONFIG_DRM_DP_CEC is not set
#
# ACP (Audio CoProcessor) Configuration
#
#
# AMD Library routines
#
#
# Frame buffer Devices
#
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_OT200=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_SOUND=y
# CONFIG_SND is not set
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=y
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=y
CONFIG_HID_ASUS=y
CONFIG_HID_AUREAL=y
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=y
# CONFIG_HID_CHICONY is not set
CONFIG_HID_CORSAIR=y
# CONFIG_HID_COUGAR is not set
CONFIG_HID_CMEDIA=y
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELAN=y
CONFIG_HID_ELECOM=y
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_GEMBIRD=y
# CONFIG_HID_GFRM is not set
CONFIG_HID_HOLTEK=y
# CONFIG_HOLTEK_FF is not set
# CONFIG_HID_GOOGLE_HAMMER is not set
CONFIG_HID_GT683R=y
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
# CONFIG_HID_ITE is not set
CONFIG_HID_JABRA=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=y
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MAYFLASH=y
CONFIG_HID_REDRAGON=y
CONFIG_HID_MICROSOFT=y
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=y
# CONFIG_HID_RETRODE is not set
CONFIG_HID_ROCCAT=y
CONFIG_HID_SAITEK=y
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SONY=y
CONFIG_SONY_FF=y
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_STEAM=y
CONFIG_HID_STEELSERIES=y
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_UDRAW_PS3=y
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=y
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y
# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set
CONFIG_HID_ALPS=y
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DBGCAP=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_XHCI_HISTB=y
CONFIG_USB_XHCI_MTK=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_XHCI_RCAR=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_NPCM7XX=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_FOTG210_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_WHCI_HCD=y
# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_HCD_SSB=y
CONFIG_USB_HCD_TEST_MODE=y
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USBIP_CORE=y
CONFIG_USBIP_VHCI_HCD=y
CONFIG_USBIP_VHCI_HC_PORTS=8
CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=y
CONFIG_USBIP_DEBUG=y
CONFIG_USB_MTU3=y
CONFIG_USB_MTU3_HOST=y
CONFIG_USB_MTU3_DEBUG=y
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PCI is not set
CONFIG_USB_DWC2_DEBUG=y
CONFIG_USB_DWC2_VERBOSE=y
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
# CONFIG_USB_DWC2_DEBUG_PERIODIC is not set
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_OF=y
CONFIG_USB_CHIPIDEA_PCI=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1760_HOST_ROLE=y
#
# USB port drivers
#
CONFIG_USB_USS720=y
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_LINK_LAYER_TEST=y
# CONFIG_USB_ATM is not set
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_KEYSTONE_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_AM335X_CONTROL_USB=y
CONFIG_AM335X_PHY_USB=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
# CONFIG_UWB_I1480U is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
# CONFIG_LEDS_MT6323 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_OT200=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_PM8058=y
# CONFIG_LEDS_MLXREG is not set
CONFIG_LEDS_USER=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_MTD=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_LEDS_TRIGGER_NETDEV=y
CONFIG_ACCESSIBILITY=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_AMD64=y
CONFIG_EDAC_AMD64_ERROR_INJECTION=y
# CONFIG_EDAC_E752X is not set
CONFIG_EDAC_I82975X=y
# CONFIG_EDAC_I3000 is not set
CONFIG_EDAC_I3200=y
# CONFIG_EDAC_IE31200 is not set
CONFIG_EDAC_X38=y
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I7CORE=y
CONFIG_EDAC_I5000=y
CONFIG_EDAC_I5100=y
# CONFIG_EDAC_I7300 is not set
# CONFIG_EDAC_PND2 is not set
# CONFIG_EDAC_XGENE is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
# CONFIG_RTC_NVMEM is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
#
# SPI RTC drivers
#
#
# SPI and I2C RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=y
# CONFIG_RTC_DRV_DS1685 is not set
# CONFIG_RTC_DRV_DS1689 is not set
CONFIG_RTC_DRV_DS17285=y
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_STK17TA8=y
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_SC27XX=y
CONFIG_RTC_DRV_SPEAR=y
# CONFIG_RTC_DRV_NUC900 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
CONFIG_RTC_DRV_CROS_EC=y
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_ASM9260 is not set
CONFIG_RTC_DRV_DAVINCI=y
CONFIG_RTC_DRV_DIGICOLOR=y
# CONFIG_RTC_DRV_S3C is not set
CONFIG_RTC_DRV_EP93XX=y
CONFIG_RTC_DRV_VR41XX=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_RTC_DRV_GENERIC=y
CONFIG_RTC_DRV_VT8500=y
# CONFIG_RTC_DRV_SUN6I is not set
# CONFIG_RTC_DRV_SUNXI is not set
CONFIG_RTC_DRV_TX4939=y
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_DRV_ARMADA38X=y
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_COH901331 is not set
# CONFIG_RTC_DRV_STMP is not set
CONFIG_RTC_DRV_JZ4740=y
# CONFIG_RTC_DRV_LPC24XX is not set
CONFIG_RTC_DRV_LPC32XX=y
# CONFIG_RTC_DRV_PM8XXX is not set
CONFIG_RTC_DRV_TEGRA=y
CONFIG_RTC_DRV_SNVS=y
CONFIG_RTC_DRV_MOXART=y
CONFIG_RTC_DRV_MT6397=y
# CONFIG_RTC_DRV_MT7622 is not set
CONFIG_RTC_DRV_XGENE=y
CONFIG_RTC_DRV_R7301=y
# CONFIG_RTC_DRV_STM32 is not set
# CONFIG_RTC_DRV_RTD119X is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=y
CONFIG_AXI_DMAC=y
CONFIG_COH901318=y
CONFIG_DMA_JZ4740=y
CONFIG_DMA_JZ4780=y
# CONFIG_DMA_SA11X0 is not set
CONFIG_DMA_SUN6I=y
CONFIG_DW_AXI_DMAC=y
CONFIG_EP93XX_DMA=y
CONFIG_FSL_EDMA=y
CONFIG_IMG_MDC_DMA=y
# CONFIG_INTEL_IDMA64 is not set
CONFIG_INTEL_IOATDMA=y
CONFIG_K3_DMA=y
CONFIG_MCF_EDMA=y
# CONFIG_MMP_PDMA is not set
CONFIG_MMP_TDMA=y
# CONFIG_MV_XOR is not set
CONFIG_MXS_DMA=y
CONFIG_NBPFAXI_DMA=y
CONFIG_PCH_DMA=y
CONFIG_STM32_DMA=y
CONFIG_STM32_DMAMUX=y
CONFIG_STM32_MDMA=y
# CONFIG_SPRD_DMA is not set
# CONFIG_S3C24XX_DMAC is not set
CONFIG_TEGRA210_ADMA=y
CONFIG_TIMB_DMA=y
# CONFIG_XGENE_DMA is not set
CONFIG_ZX_DMA=y
CONFIG_MTK_HSDMA=y
# CONFIG_QCOM_HIDMA_MGMT is not set
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
# CONFIG_DW_DMAC_PCI is not set
CONFIG_RENESAS_DMA=y
# CONFIG_SH_DMAE_BASE is not set
# CONFIG_RCAR_DMAC is not set
CONFIG_RENESAS_USB_DMAC=y
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_TI_DMA_CROSSBAR=y
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_UDMABUF is not set
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
CONFIG_HD44780=y
# CONFIG_KS0108 is not set
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
CONFIG_CHARLCD=y
CONFIG_UIO=y
CONFIG_UIO_CIF=y
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_AEC=y
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
CONFIG_UIO_PRUSS=y
CONFIG_UIO_MF624=y
CONFIG_VIRT_DRIVERS=y
# CONFIG_VBOXGUEST is not set
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
CONFIG_COMEDI=y
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
# CONFIG_COMEDI_MISC_DRIVERS is not set
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=y
CONFIG_COMEDI_PCL724=y
# CONFIG_COMEDI_PCL726 is not set
CONFIG_COMEDI_PCL730=y
CONFIG_COMEDI_PCL812=y
# CONFIG_COMEDI_PCL816 is not set
# CONFIG_COMEDI_PCL818 is not set
CONFIG_COMEDI_PCM3724=y
CONFIG_COMEDI_AMPLC_DIO200_ISA=y
CONFIG_COMEDI_AMPLC_PC236_ISA=y
CONFIG_COMEDI_AMPLC_PC263_ISA=y
CONFIG_COMEDI_RTI800=y
CONFIG_COMEDI_RTI802=y
# CONFIG_COMEDI_DAC02 is not set
CONFIG_COMEDI_DAS16M1=y
CONFIG_COMEDI_DAS08_ISA=y
# CONFIG_COMEDI_DAS16 is not set
CONFIG_COMEDI_DAS800=y
# CONFIG_COMEDI_DAS1800 is not set
# CONFIG_COMEDI_DAS6402 is not set
CONFIG_COMEDI_DT2801=y
CONFIG_COMEDI_DT2811=y
CONFIG_COMEDI_DT2814=y
# CONFIG_COMEDI_DT2815 is not set
# CONFIG_COMEDI_DT2817 is not set
# CONFIG_COMEDI_DT282X is not set
CONFIG_COMEDI_DMM32AT=y
# CONFIG_COMEDI_FL512 is not set
CONFIG_COMEDI_AIO_AIO12_8=y
CONFIG_COMEDI_AIO_IIRO_16=y
CONFIG_COMEDI_II_PCI20KC=y
CONFIG_COMEDI_C6XDIGIO=y
# CONFIG_COMEDI_MPC624 is not set
CONFIG_COMEDI_ADQ12B=y
CONFIG_COMEDI_NI_AT_A2150=y
CONFIG_COMEDI_NI_AT_AO=y
CONFIG_COMEDI_NI_ATMIO=y
# CONFIG_COMEDI_NI_ATMIO16D is not set
# CONFIG_COMEDI_NI_LABPC_ISA is not set
CONFIG_COMEDI_PCMAD=y
# CONFIG_COMEDI_PCMDA12 is not set
CONFIG_COMEDI_PCMMIO=y
CONFIG_COMEDI_PCMUIO=y
# CONFIG_COMEDI_MULTIQ3 is not set
CONFIG_COMEDI_S526=y
CONFIG_COMEDI_PCI_DRIVERS=y
CONFIG_COMEDI_8255_PCI=y
CONFIG_COMEDI_ADDI_WATCHDOG=y
CONFIG_COMEDI_ADDI_APCI_1032=y
CONFIG_COMEDI_ADDI_APCI_1500=y
CONFIG_COMEDI_ADDI_APCI_1516=y
CONFIG_COMEDI_ADDI_APCI_1564=y
CONFIG_COMEDI_ADDI_APCI_16XX=y
CONFIG_COMEDI_ADDI_APCI_2032=y
CONFIG_COMEDI_ADDI_APCI_2200=y
CONFIG_COMEDI_ADDI_APCI_3120=y
CONFIG_COMEDI_ADDI_APCI_3501=y
CONFIG_COMEDI_ADDI_APCI_3XXX=y
# CONFIG_COMEDI_ADL_PCI6208 is not set
CONFIG_COMEDI_ADL_PCI7X3X=y
CONFIG_COMEDI_ADL_PCI8164=y
# CONFIG_COMEDI_ADL_PCI9111 is not set
CONFIG_COMEDI_ADL_PCI9118=y
CONFIG_COMEDI_ADV_PCI1710=y
CONFIG_COMEDI_ADV_PCI1720=y
# CONFIG_COMEDI_ADV_PCI1723 is not set
# CONFIG_COMEDI_ADV_PCI1724 is not set
CONFIG_COMEDI_ADV_PCI1760=y
CONFIG_COMEDI_ADV_PCI_DIO=y
CONFIG_COMEDI_AMPLC_DIO200_PCI=y
CONFIG_COMEDI_AMPLC_PC236_PCI=y
CONFIG_COMEDI_AMPLC_PC263_PCI=y
CONFIG_COMEDI_AMPLC_PCI224=y
CONFIG_COMEDI_AMPLC_PCI230=y
CONFIG_COMEDI_CONTEC_PCI_DIO=y
# CONFIG_COMEDI_DAS08_PCI is not set
# CONFIG_COMEDI_DT3000 is not set
CONFIG_COMEDI_DYNA_PCI10XX=y
CONFIG_COMEDI_GSC_HPDI=y
CONFIG_COMEDI_MF6X4=y
CONFIG_COMEDI_ICP_MULTI=y
CONFIG_COMEDI_DAQBOARD2000=y
CONFIG_COMEDI_JR3_PCI=y
CONFIG_COMEDI_KE_COUNTER=y
# CONFIG_COMEDI_CB_PCIDAS64 is not set
# CONFIG_COMEDI_CB_PCIDAS is not set
CONFIG_COMEDI_CB_PCIDDA=y
CONFIG_COMEDI_CB_PCIMDAS=y
CONFIG_COMEDI_CB_PCIMDDA=y
CONFIG_COMEDI_ME4000=y
CONFIG_COMEDI_ME_DAQ=y
# CONFIG_COMEDI_NI_6527 is not set
CONFIG_COMEDI_NI_65XX=y
# CONFIG_COMEDI_NI_660X is not set
CONFIG_COMEDI_NI_670X=y
CONFIG_COMEDI_NI_LABPC_PCI=y
CONFIG_COMEDI_NI_PCIDIO=y
CONFIG_COMEDI_NI_PCIMIO=y
CONFIG_COMEDI_RTD520=y
CONFIG_COMEDI_S626=y
CONFIG_COMEDI_MITE=y
CONFIG_COMEDI_NI_TIOCMD=y
# CONFIG_COMEDI_USB_DRIVERS is not set
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=y
CONFIG_COMEDI_KCOMEDILIB=y
CONFIG_COMEDI_AMPLC_DIO200=y
CONFIG_COMEDI_AMPLC_PC236=y
CONFIG_COMEDI_DAS08=y
CONFIG_COMEDI_NI_LABPC=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_R8712U=y
#
# IIO staging drivers
#
#
# Accelerometers
#
#
# Analog to digital converters
#
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=y
#
# Capacitance to digital converters
#
#
# Direct Digital Synthesis
#
#
# Network Analyzer, Impedance Converters
#
#
# Active energy metering IC
#
#
# Resolver to digital converters
#
#
# Speakup console speech
#
CONFIG_STAGING_MEDIA=y
#
# Android
#
CONFIG_STAGING_BOARD=y
CONFIG_FIREWIRE_SERIAL=y
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
CONFIG_GOLDFISH_AUDIO=y
CONFIG_GS_FPGABOOT=y
# CONFIG_UNISYSSPAR is not set
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
# CONFIG_FSL_DPAA2 is not set
# CONFIG_MOST is not set
# CONFIG_GREYBUS is not set
# CONFIG_BCM_VIDEOCORE is not set
#
# Gasket devices
#
CONFIG_STAGING_GASKET_FRAMEWORK=y
CONFIG_STAGING_APEX_DRIVER=y
CONFIG_XIL_AXIS_FIFO=y
# CONFIG_X86_PLATFORM_DEVICES is not set
CONFIG_PMC_ATOM=y
CONFIG_GOLDFISH_PIPE=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_PSTORE=y
CONFIG_CROS_EC_CTL=y
CONFIG_CROS_EC_PROTO=y
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_VERSATILE is not set
CONFIG_CLK_HSDK=y
# CONFIG_COMMON_CLK_MAX77686 is not set
CONFIG_COMMON_CLK_HI655X=y
CONFIG_COMMON_CLK_SCMI=y
# CONFIG_COMMON_CLK_SCPI is not set
CONFIG_COMMON_CLK_GEMINI=y
CONFIG_COMMON_CLK_ASPEED=y
# CONFIG_COMMON_CLK_S2MPS11 is not set
CONFIG_COMMON_CLK_AXI_CLKGEN=y
CONFIG_CLK_QORIQ=y
CONFIG_COMMON_CLK_XGENE=y
CONFIG_COMMON_CLK_OXNAS=y
CONFIG_CLK_ACTIONS=y
# CONFIG_CLK_OWL_S700 is not set
CONFIG_CLK_OWL_S900=y
# CONFIG_CLK_BCM_63XX is not set
CONFIG_CLK_BCM_KONA=y
CONFIG_COMMON_CLK_IPROC=y
CONFIG_CLK_BCM_CYGNUS=y
CONFIG_CLK_BCM_HR2=y
CONFIG_CLK_BCM_NSP=y
CONFIG_CLK_BCM_NS2=y
CONFIG_CLK_BCM_SR=y
# CONFIG_COMMON_CLK_HI3516CV300 is not set
# CONFIG_COMMON_CLK_HI3519 is not set
CONFIG_COMMON_CLK_HI3660=y
# CONFIG_COMMON_CLK_HI3798CV200 is not set
CONFIG_COMMON_CLK_HI6220=y
# CONFIG_RESET_HISI is not set
# CONFIG_COMMON_CLK_BOSTON is not set
CONFIG_COMMON_CLK_KEYSTONE=y
#
# Clock driver for MediaTek SoC
#
CONFIG_COMMON_CLK_MEDIATEK=y
# CONFIG_COMMON_CLK_MT2701 is not set
CONFIG_COMMON_CLK_MT2712=y
CONFIG_COMMON_CLK_MT2712_BDPSYS=y
# CONFIG_COMMON_CLK_MT2712_IMGSYS is not set
CONFIG_COMMON_CLK_MT2712_JPGDECSYS=y
# CONFIG_COMMON_CLK_MT2712_MFGCFG is not set
CONFIG_COMMON_CLK_MT2712_MMSYS=y
# CONFIG_COMMON_CLK_MT2712_VDECSYS is not set
# CONFIG_COMMON_CLK_MT2712_VENCSYS is not set
CONFIG_COMMON_CLK_MT6797=y
CONFIG_COMMON_CLK_MT6797_MMSYS=y
# CONFIG_COMMON_CLK_MT6797_IMGSYS is not set
# CONFIG_COMMON_CLK_MT6797_VDECSYS is not set
# CONFIG_COMMON_CLK_MT6797_VENCSYS is not set
# CONFIG_COMMON_CLK_MT7622 is not set
CONFIG_COMMON_CLK_MT8135=y
CONFIG_COMMON_CLK_MT8173=y
CONFIG_QCOM_GDSC=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_QCOM_A53PLL=y
CONFIG_QCOM_CLK_APCS_MSM8916=y
CONFIG_APQ_GCC_8084=y
# CONFIG_APQ_MMCC_8084 is not set
CONFIG_IPQ_GCC_4019=y
CONFIG_IPQ_GCC_806X=y
CONFIG_IPQ_LCC_806X=y
# CONFIG_IPQ_GCC_8074 is not set
CONFIG_MSM_GCC_8660=y
# CONFIG_MSM_GCC_8916 is not set
CONFIG_MSM_GCC_8960=y
# CONFIG_MSM_LCC_8960 is not set
CONFIG_MDM_GCC_9615=y
CONFIG_MDM_LCC_9615=y
CONFIG_MSM_MMCC_8960=y
# CONFIG_MSM_GCC_8974 is not set
# CONFIG_MSM_MMCC_8974 is not set
# CONFIG_MSM_GCC_8994 is not set
CONFIG_MSM_GCC_8996=y
CONFIG_MSM_MMCC_8996=y
# CONFIG_MSM_GCC_8998 is not set
# CONFIG_SDM_CAMCC_845 is not set
CONFIG_SDM_GCC_845=y
CONFIG_SDM_VIDEOCC_845=y
# CONFIG_SDM_DISPCC_845 is not set
# CONFIG_SPMI_PMIC_CLKDIV is not set
# CONFIG_CLK_RENESAS is not set
CONFIG_COMMON_CLK_SAMSUNG=y
# CONFIG_EXYNOS_ARM64_COMMON_CLK is not set
CONFIG_EXYNOS_AUDSS_CLK_CON=y
# CONFIG_S3C2410_COMMON_CLK is not set
CONFIG_S3C2412_COMMON_CLK=y
CONFIG_S3C2443_COMMON_CLK=y
CONFIG_SPRD_COMMON_CLK=y
CONFIG_SPRD_SC9860_CLK=y
CONFIG_SUNXI_CCU=y
CONFIG_SUN50I_A64_CCU=y
CONFIG_SUN50I_H6_CCU=y
CONFIG_SUN50I_H6_R_CCU=y
# CONFIG_SUN4I_A10_CCU is not set
# CONFIG_SUN5I_CCU is not set
CONFIG_SUN6I_A31_CCU=y
# CONFIG_SUN8I_A23_CCU is not set
CONFIG_SUN8I_A33_CCU=y
# CONFIG_SUN8I_A83T_CCU is not set
CONFIG_SUN8I_H3_CCU=y
CONFIG_SUN8I_V3S_CCU=y
# CONFIG_SUN8I_DE2_CCU is not set
# CONFIG_SUN8I_R40_CCU is not set
CONFIG_SUN9I_A80_CCU=y
# CONFIG_SUN8I_R_CCU is not set
CONFIG_COMMON_CLK_TI_ADPLL=y
# CONFIG_CLK_UNIPHIER is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
CONFIG_CLKSRC_MMIO=y
CONFIG_BCM2835_TIMER=y
CONFIG_BCM_KONA_TIMER=y
CONFIG_DIGICOLOR_TIMER=y
CONFIG_DW_APB_TIMER=y
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_MESON6_TIMER is not set
# CONFIG_OWL_TIMER is not set
# CONFIG_SUN4I_TIMER is not set
CONFIG_SUN5I_HSTIMER=y
CONFIG_VT8500_TIMER=y
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_CADENCE_TTC_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
CONFIG_CLPS711X_TIMER=y
CONFIG_ATLAS7_TIMER=y
# CONFIG_MXS_TIMER is not set
# CONFIG_PRIMA2_TIMER is not set
CONFIG_NSPIRE_TIMER=y
CONFIG_INTEGRATOR_AP_TIMER=y
CONFIG_CLKSRC_PISTACHIO=y
CONFIG_ARC_TIMERS=y
# CONFIG_ARC_TIMERS_64BIT is not set
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_ST is not set
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
CONFIG_OXNAS_RPS_TIMER=y
# CONFIG_MTK_TIMER is not set
CONFIG_SPRD_TIMER=y
CONFIG_CLKSRC_JCORE_PIT=y
# CONFIG_SH_TIMER_CMT is not set
CONFIG_SH_TIMER_MTU2=y
CONFIG_RENESAS_OSTM=y
# CONFIG_SH_TIMER_TMU is not set
CONFIG_EM_TIMER_STI=y
# CONFIG_CLKSRC_PXA is not set
CONFIG_H8300_TMR8=y
CONFIG_H8300_TMR16=y
CONFIG_H8300_TPU=y
CONFIG_CLKSRC_ST_LPC=y
CONFIG_ATCPIT100_TIMER=y
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
#
# SOC (System On Chip) specific Drivers
#
CONFIG_OWL_PM_DOMAINS_HELPER=y
CONFIG_OWL_PM_DOMAINS=y
#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=y
CONFIG_MESON_GX_SOCINFO=y
# CONFIG_MESON_GX_PM_DOMAINS is not set
CONFIG_MESON_MX_SOCINFO=y
CONFIG_AT91_SOC_ID=y
#
# Broadcom SoC drivers
#
CONFIG_SOC_BRCMSTB=y
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_FSL_MC_DPIO is not set
#
# i.MX SoC drivers
#
# CONFIG_IMX7_PM_DOMAINS is not set
#
# MediaTek SoC drivers
#
CONFIG_MTK_INFRACFG=y
# CONFIG_MTK_PMIC_WRAP is not set
CONFIG_MTK_SCPSYS=y
#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_GENI_SE is not set
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_LLCC=y
CONFIG_QCOM_SDM845_LLCC=y
# CONFIG_QCOM_RPMH is not set
CONFIG_SOC_RENESAS=y
CONFIG_SYSC_R8A7743=y
# CONFIG_SYSC_R8A7745 is not set
CONFIG_SYSC_R8A77470=y
# CONFIG_SYSC_R8A774A1 is not set
CONFIG_SYSC_R8A774C0=y
CONFIG_SYSC_R8A7779=y
# CONFIG_SYSC_R8A7790 is not set
CONFIG_SYSC_R8A7791=y
# CONFIG_SYSC_R8A7792 is not set
CONFIG_SYSC_R8A7794=y
CONFIG_SYSC_R8A7795=y
# CONFIG_SYSC_R8A7796 is not set
# CONFIG_SYSC_R8A77965 is not set
# CONFIG_SYSC_R8A77970 is not set
# CONFIG_SYSC_R8A77980 is not set
CONFIG_SYSC_R8A77990=y
CONFIG_SYSC_R8A77995=y
CONFIG_RST_RCAR=y
CONFIG_SYSC_RCAR=y
CONFIG_ROCKCHIP_GRF=y
# CONFIG_ROCKCHIP_PM_DOMAINS is not set
CONFIG_SOC_SAMSUNG=y
CONFIG_EXYNOS_PM_DOMAINS=y
# CONFIG_SOC_TI is not set
CONFIG_UX500_SOC_ID=y
#
# Xilinx SoC drivers
#
CONFIG_XILINX_VCU=y
# CONFIG_SOC_ZTE is not set
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_MAX3355=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y
CONFIG_MEMORY=y
CONFIG_FSL_IFC=y
CONFIG_JZ4780_NEMC=y
CONFIG_SAMSUNG_MC=y
CONFIG_EXYNOS_SROM=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y
#
# Accelerometers
#
CONFIG_BMC150_ACCEL=y
CONFIG_HID_SENSOR_ACCEL_3D=y
# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set
# CONFIG_KXSD9 is not set
#
# Analog to digital converters
#
CONFIG_ASPEED_ADC=y
CONFIG_AT91_SAMA5D2_ADC=y
CONFIG_BCM_IPROC_ADC=y
CONFIG_CC10001_ADC=y
CONFIG_DLN2_ADC=y
CONFIG_ENVELOPE_DETECTOR=y
CONFIG_EXYNOS_ADC=y
CONFIG_MXS_LRADC_ADC=y
# CONFIG_FSL_MX25_ADC is not set
CONFIG_HX711=y
CONFIG_IMX7D_ADC=y
CONFIG_LPC18XX_ADC=y
# CONFIG_LPC32XX_ADC is not set
# CONFIG_MEDIATEK_MT6577_AUXADC is not set
CONFIG_MEN_Z188_ADC=y
# CONFIG_MESON_SARADC is not set
# CONFIG_QCOM_PM8XXX_XOADC is not set
CONFIG_RCAR_GYRO_ADC=y
CONFIG_SC27XX_ADC=y
CONFIG_SPEAR_ADC=y
# CONFIG_SD_ADC_MODULATOR is not set
CONFIG_STM32_ADC_CORE=y
CONFIG_STM32_ADC=y
CONFIG_STM32_DFSDM_CORE=y
# CONFIG_STM32_DFSDM_ADC is not set
# CONFIG_STX104 is not set
CONFIG_SUN4I_GPADC=y
# CONFIG_TI_AM335X_ADC is not set
# CONFIG_VF610_ADC is not set
CONFIG_VIPERBOARD_ADC=y
CONFIG_XILINX_XADC=y
#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=y
#
# Amplifiers
#
#
# Chemical Sensors
#
CONFIG_IIO_CROS_EC_SENSORS_CORE=y
# CONFIG_IIO_CROS_EC_SENSORS is not set
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
#
# SSP Sensor Common
#
#
# Counters
#
CONFIG_104_QUAD_8=y
# CONFIG_STM32_LPTIMER_CNT is not set
#
# Digital to analog converters
#
# CONFIG_CIO_DAC is not set
CONFIG_DPOT_DAC=y
CONFIG_LPC18XX_DAC=y
CONFIG_STM32_DAC=y
CONFIG_STM32_DAC_CORE=y
CONFIG_VF610_DAC=y
#
# IIO dummy driver
#
# CONFIG_IIO_SIMPLE_DUMMY is not set
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
#
# Digital gyroscope sensors
#
# CONFIG_HID_SENSOR_GYRO_3D is not set
#
# Health Sensors
#
#
# Heart Rate Monitors
#
#
# Humidity sensors
#
# CONFIG_DHT11 is not set
CONFIG_HID_SENSOR_HUMIDITY=y
#
# Inertial measurement units
#
#
# Light sensors
#
# CONFIG_CM3605 is not set
CONFIG_IIO_CROS_EC_LIGHT_PROX=y
CONFIG_HID_SENSOR_ALS=y
# CONFIG_HID_SENSOR_PROX is not set
#
# Magnetometer sensors
#
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
#
# Multiplexers
#
CONFIG_IIO_MUX=y
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=y
CONFIG_HID_SENSOR_DEVICE_ROTATION=y
#
# Triggers - standalone
#
# CONFIG_IIO_HRTIMER_TRIGGER is not set
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_STM32_LPTIMER_TRIGGER=y
CONFIG_IIO_STM32_TIMER_TRIGGER=y
# CONFIG_IIO_TIGHTLOOP_TRIGGER is not set
CONFIG_IIO_SYSFS_TRIGGER=y
#
# Digital potentiometers
#
#
# Digital potentiostats
#
#
# Pressure sensors
#
CONFIG_IIO_CROS_EC_BARO=y
# CONFIG_HID_SENSOR_PRESS is not set
CONFIG_MS5611=y
# CONFIG_ZPA2326 is not set
#
# Lightning sensors
#
#
# Proximity and distance sensors
#
CONFIG_SRF04=y
#
# Resolver to digital converters
#
#
# Temperature sensors
#
CONFIG_HID_SENSOR_TEMP=y
CONFIG_NTB=y
CONFIG_NTB_AMD=y
# CONFIG_NTB_IDT is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_SWITCHTEC is not set
CONFIG_NTB_PINGPONG=y
CONFIG_NTB_TOOL=y
CONFIG_NTB_PERF=y
CONFIG_NTB_TRANSPORT=y
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_JCORE_AIC is not set
CONFIG_TS4800_IRQ=y
# CONFIG_IRQ_UNIPHIER_AIDET is not set
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
# CONFIG_SERIAL_IPOCTAL is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_ATH79=y
CONFIG_RESET_AXS10X=y
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_HSDK is not set
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_LANTIQ is not set
CONFIG_RESET_LPC18XX=y
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_MESON_AUDIO_ARB is not set
CONFIG_RESET_PISTACHIO=y
CONFIG_RESET_QCOM_AOSS=y
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_STM32MP157 is not set
# CONFIG_RESET_SUNXI is not set
CONFIG_RESET_TI_SYSCON=y
CONFIG_RESET_UNIPHIER=y
# CONFIG_RESET_UNIPHIER_USB3 is not set
# CONFIG_RESET_ZYNQ is not set
CONFIG_COMMON_RESET_HI3660=y
CONFIG_COMMON_RESET_HI6220=y
CONFIG_FMC=y
# CONFIG_FMC_FAKEDEV is not set
CONFIG_FMC_TRIVIAL=y
CONFIG_FMC_WRITE_EEPROM=y
CONFIG_FMC_CHARDEV=y
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_PHY_LPC18XX_USB_OTG=y
CONFIG_PHY_XGENE=y
CONFIG_PHY_MESON8B_USB2=y
# CONFIG_PHY_MESON_GXL_USB2 is not set
# CONFIG_PHY_MESON_GXL_USB3 is not set
CONFIG_PHY_CYGNUS_PCIE=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_BCM_NS_USB2=y
CONFIG_PHY_BCM_NS_USB3=y
CONFIG_PHY_NS2_PCIE=y
CONFIG_PHY_NS2_USB_DRD=y
CONFIG_PHY_BRCM_SATA=y
CONFIG_PHY_BCM_SR_PCIE=y
CONFIG_PHY_CADENCE_DP=y
CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=y
CONFIG_PHY_LANTIQ_RCU_USB2=y
CONFIG_ARMADA375_USBCLUSTER_PHY=y
# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
CONFIG_PHY_PXA_28NM_HSIC=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_CPCAP_USB is not set
CONFIG_PHY_MAPPHONE_MDM6600=y
CONFIG_PHY_ATH79_USB=y
# CONFIG_PHY_QCOM_QMP is not set
CONFIG_PHY_QCOM_QUSB2=y
# CONFIG_PHY_QCOM_USB_HS is not set
CONFIG_PHY_QCOM_USB_HSIC=y
CONFIG_PHY_RALINK_USB=y
CONFIG_PHY_RCAR_GEN3_USB3=y
CONFIG_PHY_ROCKCHIP_INNO_HDMI=y
# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
CONFIG_PHY_ROCKCHIP_PCIE=y
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
CONFIG_PHY_EXYNOS_DP_VIDEO=y
CONFIG_PHY_EXYNOS_MIPI_VIDEO=y
# CONFIG_PHY_EXYNOS_PCIE is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
CONFIG_PHY_UNIPHIER_USB2=y
# CONFIG_PHY_UNIPHIER_USB3 is not set
CONFIG_PHY_UNIPHIER_PCIE=y
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
CONFIG_PHY_ST_SPEAR1340_MIPHY=y
# CONFIG_PHY_STIH407_USB is not set
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_OMAP_CONTROL_PHY=y
# CONFIG_PHY_TUSB1210 is not set
CONFIG_POWERCAP=y
# CONFIG_INTEL_RAPL is not set
# CONFIG_IDLE_INJECT is not set
CONFIG_MCB=y
CONFIG_MCB_PCI=y
CONFIG_MCB_LPC=y
#
# Performance monitor support
#
CONFIG_RAS=y
CONFIG_THUNDERBOLT=y
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_IMX_IIM=y
# CONFIG_NVMEM_IMX_OCOTP is not set
CONFIG_NVMEM_LPC18XX_EEPROM=y
CONFIG_NVMEM_LPC18XX_OTP=y
CONFIG_NVMEM_MXS_OCOTP=y
CONFIG_MTK_EFUSE=y
CONFIG_QCOM_QFPROM=y
# CONFIG_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_BCM_OCOTP is not set
CONFIG_UNIPHIER_EFUSE=y
# CONFIG_NVMEM_VF610_OCOTP is not set
# CONFIG_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
CONFIG_SC27XX_EFUSE=y
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
CONFIG_FPGA=y
CONFIG_FPGA_MGR_SOCFPGA=y
CONFIG_FPGA_MGR_SOCFPGA_A10=y
CONFIG_ALTERA_PR_IP_CORE=y
CONFIG_ALTERA_PR_IP_CORE_PLAT=y
CONFIG_FPGA_MGR_ALTERA_CVP=y
CONFIG_FPGA_MGR_ZYNQ_FPGA=y
CONFIG_FPGA_BRIDGE=y
CONFIG_XILINX_PR_DECOUPLER=y
CONFIG_FPGA_REGION=y
CONFIG_OF_FPGA_REGION=y
CONFIG_FPGA_DFL=y
CONFIG_FPGA_DFL_FME=y
CONFIG_FPGA_DFL_FME_MGR=y
CONFIG_FPGA_DFL_FME_BRIDGE=y
# CONFIG_FPGA_DFL_FME_REGION is not set
# CONFIG_FPGA_DFL_AFU is not set
# CONFIG_FPGA_DFL_PCI is not set
CONFIG_FSI=y
CONFIG_FSI_NEW_DEV_NODE=y
# CONFIG_FSI_MASTER_GPIO is not set
CONFIG_FSI_MASTER_HUB=y
# CONFIG_FSI_SCOM is not set
CONFIG_FSI_SBEFIFO=y
CONFIG_TEE=y
#
# TEE drivers
#
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
# CONFIG_MUX_GPIO is not set
# CONFIG_MUX_MMIO is not set
# CONFIG_SIOX is not set
CONFIG_SLIMBUS=y
# CONFIG_SLIM_QCOM_CTRL is not set
# CONFIG_INTERCONNECT is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_POSIX_ACL=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
# CONFIG_FILE_LOCKING is not set
CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
CONFIG_FSCACHE_HISTOGRAM=y
CONFIG_FSCACHE_DEBUG=y
# CONFIG_FSCACHE_OBJECT_LIST is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ECRYPT_FS=y
# CONFIG_ECRYPT_FS_MESSAGING is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_CRAMFS_MTD is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_MTD=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
CONFIG_PSTORE_LZO_COMPRESS=y
CONFIG_PSTORE_LZ4_COMPRESS=y
CONFIG_PSTORE_LZ4HC_COMPRESS=y
CONFIG_PSTORE_842_COMPRESS=y
CONFIG_PSTORE_ZSTD_COMPRESS=y
CONFIG_PSTORE_COMPRESS=y
# CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZO_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_842_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_ZSTD_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="zstd"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
CONFIG_PSTORE_RAM=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
# CONFIG_NLS_MAC_CYRILLIC is not set
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
# CONFIG_NLS_MAC_ROMANIAN is not set
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITYFS is not set
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
CONFIG_CRYPTO_ENGINE=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_AEGIS128L=y
CONFIG_CRYPTO_AEGIS256=y
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
# CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2 is not set
CONFIG_CRYPTO_AEGIS256_AESNI_SSE2=y
CONFIG_CRYPTO_MORUS640=y
# CONFIG_CRYPTO_MORUS640_SSE2 is not set
CONFIG_CRYPTO_MORUS1280=y
# CONFIG_CRYPTO_MORUS1280_SSE2 is not set
# CONFIG_CRYPTO_MORUS1280_AVX2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_POLY1305_X86_64=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
# CONFIG_CRYPTO_SM3 is not set
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_AES_X86_64=y
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_BLOWFISH_X86_64=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=y
CONFIG_CRYPTO_CAST6=y
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DES3_EDE_X86_64=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_CHACHA20=y
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
# CONFIG_CRYPTO_USER_API_HASH is not set
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_STATS=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_PICOXCELL=y
# CONFIG_CRYPTO_DEV_EXYNOS_RNG is not set
CONFIG_CRYPTO_DEV_S5P=y
CONFIG_CRYPTO_DEV_EXYNOS_HASH=y
# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set
# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
CONFIG_CRYPTO_DEV_ATMEL_TDES=y
CONFIG_CRYPTO_DEV_ATMEL_SHA=y
# CONFIG_CRYPTO_DEV_CCP is not set
CONFIG_CRYPTO_DEV_QAT=y
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
CONFIG_CRYPTO_DEV_QAT_C3XXX=y
CONFIG_CRYPTO_DEV_QAT_C62X=y
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=y
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=y
CONFIG_CRYPTO_DEV_QAT_C62XVF=y
# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
CONFIG_CRYPTO_DEV_QCE=y
CONFIG_CRYPTO_DEV_QCOM_RNG=y
# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
CONFIG_CRYPTO_DEV_MEDIATEK=y
CONFIG_CRYPTO_DEV_VIRTIO=y
CONFIG_CRYPTO_DEV_SAFEXCEL=y
CONFIG_CRYPTO_DEV_CCREE=y
CONFIG_CRYPTO_DEV_HISI_SEC=y
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_STMP_DEVICE=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
CONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not set
CONFIG_XZ_DEC_ARMTHUMB=y
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DIRECT_OPS=y
CONFIG_SWIOTLB=y
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_SG_SPLIT=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_UACCESS_MCSAFE=y
CONFIG_STACKDEPOT=y
CONFIG_PARMAN=y
CONFIG_STRING_SELFTEST=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
#
# Compile-time checks and compiler options
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
CONFIG_STACK_VALIDATION=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_PAGE_POISONING=y
CONFIG_PAGE_POISONING_NO_SANITY=y
CONFIG_PAGE_POISONING_ZERO=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_MEMORY_NOTIFIER_ERROR_INJECT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_KASAN=y
# CONFIG_KASAN_OUTLINE is not set
CONFIG_KASAN_INLINE=y
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_DEBUG_TIMEKEEPING=y
CONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_DEBUG_LOCKDEP=y
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
CONFIG_DEBUG_KOBJECT=y
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=y
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=y
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
CONFIG_FAIL_FUTEX=y
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
# CONFIG_MEMTEST is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_SAMPLES=y
CONFIG_SAMPLE_VFS=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_DEBUG_AID_FOR_SYZBOT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
CONFIG_DEBUG_TLBFLUSH=y
# CONFIG_IOMMU_DEBUG is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_DEBUG_BOOT_PARAMS is not set
CONFIG_CPA_DEBUG=y
CONFIG_OPTIMIZE_INLINING=y
CONFIG_DEBUG_ENTRY=y
CONFIG_DEBUG_NMI_SELFTEST=y
# CONFIG_X86_DEBUG_FPU is not set
CONFIG_PUNIT_ATOM_DEBUG=y
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
^ permalink raw reply
* Re: linux-next: Tree for Oct 5 (net/core/filter.c)
From: Daniel Borkmann @ 2018-10-05 15:51 UTC (permalink / raw)
To: Randy Dunlap, Stephen Rothwell, Linux-Next Mailing List
Cc: Linux Kernel Mailing List, netdev@vger.kernel.org,
Alexei Starovoitov, joe
In-Reply-To: <51ea61d3-032b-f316-4a61-b63ab208d8d4@infradead.org>
[ +Joe ]
On 10/05/2018 05:42 PM, Randy Dunlap wrote:
> On 10/4/18 11:39 PM, Stephen Rothwell wrote:
>> Hi all,
>>
>> Changes since 20181004:
>>
>
> on i386 or x86_64:
>
> net/core/filter.o: In function `bpf_sk_release':
> filter.c:(.text+0x3c5c): undefined reference to `sock_gen_put'
> net/core/filter.o: In function `sk_lookup':
> filter.c:(.text+0x79a5): undefined reference to `tcp_hashinfo'
> filter.c:(.text+0x79bc): undefined reference to `__inet_lookup_established'
> filter.c:(.text+0x79eb): undefined reference to `tcp_hashinfo'
> filter.c:(.text+0x79f3): undefined reference to `__inet_lookup_listener'
> filter.c:(.text+0x7a14): undefined reference to `udp_table'
> filter.c:(.text+0x7a26): undefined reference to `__udp4_lib_lookup'
>
>
> Full randconfig file is attached.
>
> Reported-by: Randy Dunlap <rdunlap@infradead.org>
>
^ permalink raw reply
* question regarding Linux kernel handling of packets received that has src address of interface address
From: Mikael Abrahamsson @ 2018-10-05 8:50 UTC (permalink / raw)
To: netdev
Hi,
in the context of this IETF draft:
https://tools.ietf.org/html/draft-patterson-intarea-ipoe-health-05
we're looking into being able to do internet access health check, by
sending a packet to ourself via the upstream ISP router, to check if
everything is still alive.
Deployment scenario is as follows:
<Internet> BNG <-L2-> <WAN-RG-LAN>
For the normal deployment scenario, the WAN address of the RG (residential
gateway) will have both IPv4 and IPv6 packets.
So let's say in this case that WAN has 100.64.0.2 address and BNG has
100.64.0.1 address. For IPv6 they have 2001:db8::2 and ::1 respectively,
and RG has prefix 2001:db8:100::/56 routed to 2001:db8::2.
On the RG we would take the mac address of the BNG by looking at the
100.64.0.1 ARP entry, look at our own WAN mac address and form a packet:
RG-WAN-MAC > BNG-WAN-MAC IP SRC: 100.64.0.2 IP DST 100.64.0.2
we would then get back a packet (since the SRC passes the BNG
anti-spoofing rule, it's then just forwarded according to the normal
forwarding table):
BNG-WAN-MAC > RG-WAN-MAC IP SRC: 100.64.0.2 IP DST 100.64.0.2
So we're sending a packet with our own address as both src and dst, just
now instead with the mac addresses swapped because it went in via the BNG
routing engine and was sentback to us. For IPv6, look at
https://www.ietf.org/mail-archive/web/v6ops/current/msg30041.html
If I make "ncat" listen to UDP port 10000, I can successfully receive
packets with src not my own interface address, which is fine for the
DHCPv6-PD case (I have plenty of LAN addresses to choose from), but it
doesn't work for the IPv6 IA_NA and IPv4 case. I have to use my source
address to pass the BNG anti-spoofing filters.
So my question is where in the Linux kernel is this check performed that
disallows incoming packets that have src IP address the same as an
interface address? Can it be turned off? Is there a way to "hack around
it", for instance with iptables and re-write the source address of the
packet before it hits this check (I don't care about the source address
when the packet is delivered to the application, it can be re-written to
anything).
rp_filter is turned off in my testing.
Thanks.
--
Mikael Abrahamsson email: swmike@swm.pp.se
^ permalink raw reply
* Re: [PATCH net 2/2] rxrpc: Fix the data_ready handler
From: Eric Dumazet @ 2018-10-05 16:07 UTC (permalink / raw)
To: David Howells, Eric Dumazet; +Cc: netdev, linux-afs, linux-kernel, Paolo Abeni
In-Reply-To: <15184.1538749081@warthog.procyon.org.uk>
On 10/05/2018 07:18 AM, David Howells wrote:
> Eric Dumazet <eric.dumazet@gmail.com> wrote:
>
>> This looks a potential infinite loop to me ?
>
> I assume that you're talking about the case where the packets are coming in so
> fast that rxrpc is processing them as fast as they're coming in - or failing
> to keep up. I'm not sure what's the best thing to do in that case.
Well, this is exactly why we do not write such loops :/
sk_data_ready is not meant to process packets, it is meant to signal
to another entity (preferably running in process context and thus with proper
schedule points, and not blocking BH) that there is data ready to be consumed.
Under DOS, it is possible multiple cpus will sk_data_ready in parallel.
^ permalink raw reply
* [PATCH] bpf: fix building without CONFIG_INET
From: Arnd Bergmann @ 2018-10-05 16:15 UTC (permalink / raw)
To: Alexei Starovoitov, Daniel Borkmann, David S. Miller
Cc: Arnd Bergmann, John Fastabend, Martin KaFai Lau, Toshiaki Makita,
Lawrence Brakmo, Andrey Ignatov, Jesper Dangaard Brouer,
Jakub Kicinski, Mathieu Xhonneux, David Ahern, netdev,
linux-kernel
The newly added TCP and UDP handling fails to link when CONFIG_INET
is disabled:
net/core/filter.o: In function `sk_lookup':
filter.c:(.text+0x7ff8): undefined reference to `tcp_hashinfo'
filter.c:(.text+0x7ffc): undefined reference to `tcp_hashinfo'
filter.c:(.text+0x8020): undefined reference to `__inet_lookup_established'
filter.c:(.text+0x8058): undefined reference to `__inet_lookup_listener'
filter.c:(.text+0x8068): undefined reference to `udp_table'
filter.c:(.text+0x8070): undefined reference to `udp_table'
filter.c:(.text+0x808c): undefined reference to `__udp4_lib_lookup'
net/core/filter.o: In function `bpf_sk_release':
filter.c:(.text+0x82e8): undefined reference to `sock_gen_put'
The compiler can optimize it out and avoid those references for
the most part, but we are missing a few steps here:
- sk_lookup() should always have been marked 'static', this also
avoids a warning about a missing prototype when building with
'make W=1'.
- The BPF_CALL_x() macro needs a little change to allow marking
the unneeded BPF call as 'static' and having the compiler
drop them.
- The reference to the bpf_func_proto must be made conditional.
Fixes: 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
include/linux/filter.h | 2 +-
net/core/filter.c | 18 +++++++++++-------
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 6791a0ac0139..d9ec9d908bbe 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -428,9 +428,9 @@ struct sock_reuseport;
u64, __ur_3, u64, __ur_4, u64, __ur_5)
#define BPF_CALL_x(x, name, ...) \
+ u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__)); \
static __always_inline \
u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)); \
- u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__)); \
u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__)) \
{ \
return ____##name(__BPF_MAP(x,__BPF_CAST,__BPF_N,__VA_ARGS__));\
diff --git a/net/core/filter.c b/net/core/filter.c
index 30c6b2d3ef16..dd5fe021f44c 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -4817,7 +4817,7 @@ static const struct bpf_func_proto bpf_lwt_seg6_adjust_srh_proto = {
};
#endif /* CONFIG_IPV6_SEG6_BPF */
-struct sock *sk_lookup(struct net *net, struct bpf_sock_tuple *tuple,
+static struct sock *sk_lookup(struct net *net, struct bpf_sock_tuple *tuple,
struct sk_buff *skb, u8 family, u8 proto)
{
int dif = skb->dev->ifindex;
@@ -4902,13 +4902,13 @@ bpf_sk_lookup(struct sk_buff *skb, struct bpf_sock_tuple *tuple, u32 len,
return (unsigned long) sk;
}
-BPF_CALL_5(bpf_sk_lookup_tcp, struct sk_buff *, skb,
+static BPF_CALL_5(bpf_sk_lookup_tcp, struct sk_buff *, skb,
struct bpf_sock_tuple *, tuple, u32, len, u64, netns_id, u64, flags)
{
return bpf_sk_lookup(skb, tuple, len, IPPROTO_TCP, netns_id, flags);
}
-static const struct bpf_func_proto bpf_sk_lookup_tcp_proto = {
+static const __maybe_unused struct bpf_func_proto bpf_sk_lookup_tcp_proto = {
.func = bpf_sk_lookup_tcp,
.gpl_only = false,
.pkt_access = true,
@@ -4920,13 +4920,13 @@ static const struct bpf_func_proto bpf_sk_lookup_tcp_proto = {
.arg5_type = ARG_ANYTHING,
};
-BPF_CALL_5(bpf_sk_lookup_udp, struct sk_buff *, skb,
+static BPF_CALL_5(bpf_sk_lookup_udp, struct sk_buff *, skb,
struct bpf_sock_tuple *, tuple, u32, len, u64, netns_id, u64, flags)
{
return bpf_sk_lookup(skb, tuple, len, IPPROTO_UDP, netns_id, flags);
}
-static const struct bpf_func_proto bpf_sk_lookup_udp_proto = {
+static const __maybe_unused struct bpf_func_proto bpf_sk_lookup_udp_proto = {
.func = bpf_sk_lookup_udp,
.gpl_only = false,
.pkt_access = true,
@@ -4938,14 +4938,14 @@ static const struct bpf_func_proto bpf_sk_lookup_udp_proto = {
.arg5_type = ARG_ANYTHING,
};
-BPF_CALL_1(bpf_sk_release, struct sock *, sk)
+static BPF_CALL_1(bpf_sk_release, struct sock *, sk)
{
if (!sock_flag(sk, SOCK_RCU_FREE))
sock_gen_put(sk);
return 0;
}
-static const struct bpf_func_proto bpf_sk_release_proto = {
+static const __maybe_unused struct bpf_func_proto bpf_sk_release_proto = {
.func = bpf_sk_release,
.gpl_only = false,
.ret_type = RET_INTEGER,
@@ -5158,12 +5158,14 @@ tc_cls_act_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
case BPF_FUNC_skb_ancestor_cgroup_id:
return &bpf_skb_ancestor_cgroup_id_proto;
#endif
+#ifdef CONFIG_INET
case BPF_FUNC_sk_lookup_tcp:
return &bpf_sk_lookup_tcp_proto;
case BPF_FUNC_sk_lookup_udp:
return &bpf_sk_lookup_udp_proto;
case BPF_FUNC_sk_release:
return &bpf_sk_release_proto;
+#endif
default:
return bpf_base_func_proto(func_id);
}
@@ -5264,12 +5266,14 @@ sk_skb_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
return &bpf_sk_redirect_hash_proto;
case BPF_FUNC_get_local_storage:
return &bpf_get_local_storage_proto;
+#ifdef CONFIG_INET
case BPF_FUNC_sk_lookup_tcp:
return &bpf_sk_lookup_tcp_proto;
case BPF_FUNC_sk_lookup_udp:
return &bpf_sk_lookup_udp_proto;
case BPF_FUNC_sk_release:
return &bpf_sk_release_proto;
+#endif
default:
return bpf_base_func_proto(func_id);
}
--
2.18.0
^ permalink raw reply related
* [PATCH] bpf: 32-bit RSH verification must truncate input before the ALU op
From: Jann Horn @ 2018-10-05 16:17 UTC (permalink / raw)
To: Daniel Borkmann, Alexei Starovoitov, netdev, jannh
Cc: David S. Miller, linux-kernel
When I wrote commit 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification"), I
assumed that, in order to emulate 64-bit arithmetic with 32-bit logic, it
is sufficient to just truncate the output to 32 bits; and so I just moved
the register size coercion that used to be at the start of the function to
the end of the function.
That assumption is true for almost every op, but not for 32-bit right
shifts, because those can propagate information towards the least
significant bit. Fix it by always truncating inputs for 32-bit ops to 32
bits.
Also get rid of the coerce_reg_to_size() after the ALU op, since that has
no effect.
Fixes: 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jann Horn <jannh@google.com>
---
kernel/bpf/verifier.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index bb07e74b34a2..465952a8e465 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2896,6 +2896,15 @@ static int adjust_scalar_min_max_vals(struct bpf_verifier_env *env,
u64 umin_val, umax_val;
u64 insn_bitness = (BPF_CLASS(insn->code) == BPF_ALU64) ? 64 : 32;
+ if (insn_bitness == 32) {
+ /* Relevant for 32-bit RSH: Information can propagate towards
+ * LSB, so it isn't sufficient to only truncate the output to
+ * 32 bits.
+ */
+ coerce_reg_to_size(dst_reg, 4);
+ coerce_reg_to_size(&src_reg, 4);
+ }
+
smin_val = src_reg.smin_value;
smax_val = src_reg.smax_value;
umin_val = src_reg.umin_value;
@@ -3131,7 +3140,6 @@ static int adjust_scalar_min_max_vals(struct bpf_verifier_env *env,
if (BPF_CLASS(insn->code) != BPF_ALU64) {
/* 32-bit ALU ops are (32,32)->32 */
coerce_reg_to_size(dst_reg, 4);
- coerce_reg_to_size(&src_reg, 4);
}
__reg_deduce_bounds(dst_reg);
--
2.19.0.605.g01d371f741-goog
^ permalink raw reply related
* Re: [PATCH net 2/2] rxrpc: Fix the data_ready handler
From: David Howells @ 2018-10-05 16:33 UTC (permalink / raw)
To: Eric Dumazet; +Cc: dhowells, netdev, linux-afs, linux-kernel, Paolo Abeni
In-Reply-To: <80cf9647-ffdf-210a-7b0e-22bf35a57239@gmail.com>
Eric Dumazet <eric.dumazet@gmail.com> wrote:
> sk_data_ready is not meant to process packets, it is meant to signal
> to another entity (preferably running in process context and thus with proper
> schedule points, and not blocking BH) that there is data ready to be consumed.
The issue is that I need to route the packets to the appropriate call, and the
BH appears to be the right place to do this, especially as I can quickly parse
and discard certain types of packet right there.
If I move all of this to process context then that adds extra context switches
between the routing process and the destination process.
> Under DOS, it is possible multiple cpus will sk_data_ready in parallel.
Ummm... I've been led to believe that sk_data_ready will *not* be called in
parallel and that the code it calls can assume non-reentrancy. Is this not
the case?
What about the patch I attached, whereby I use the encap_rcv() hook. Do you
say that won't work?
David
^ permalink raw reply
* [PATCH net-next] cxgb4: use FW_PORT_ACTION_L1_CFG32 for 32 bit capability
From: Ganesh Goudar @ 2018-10-05 9:34 UTC (permalink / raw)
To: netdev, davem; +Cc: nirranjan, indranil, dt, Ganesh Goudar, Casey Leedom
when 32 bit port capability is in use, use FW_PORT_ACTION_L1_CFG32
rather than FW_PORT_ACTION_L1_CFG.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
---
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index f85eab5..cb52394 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -4204,6 +4204,7 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox,
*/
int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port)
{
+ unsigned int fw_caps = adap->params.fw_caps_support;
struct fw_port_cmd c;
memset(&c, 0, sizeof(c));
@@ -4211,9 +4212,14 @@ int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port)
FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
FW_PORT_CMD_PORTID_V(port));
c.action_to_len16 =
- cpu_to_be32(FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_L1_CFG) |
+ cpu_to_be32(FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
+ ? FW_PORT_ACTION_L1_CFG
+ : FW_PORT_ACTION_L1_CFG32) |
FW_LEN16(c));
- c.u.l1cfg.rcap = cpu_to_be32(FW_PORT_CAP32_ANEG);
+ if (fw_caps == FW_CAPS16)
+ c.u.l1cfg.rcap = cpu_to_be32(FW_PORT_CAP_ANEG);
+ else
+ c.u.l1cfg32.rcap32 = cpu_to_be32(FW_PORT_CAP32_ANEG);
return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 0/6] Fixes, minor changes & cleanups for the Unicast MAC VLAN table
From: Salil Mehta @ 2018-10-05 17:03 UTC (permalink / raw)
To: davem
Cc: salil.mehta, yisen.zhuang, lipeng321, mehta.salil, netdev,
linux-kernel, linuxarm
This patch-set presents necessary modifications, fixes & cleanups related
to Unicast MAC Vlan Table to support revision 0x21 hardware.
Jian Shen (5):
net: hns3: Remove the default mask configuration for mac vlan table
net: hns3: Clear mac vlan table entries when unload driver or function
reset
net: hns3: Optimize for unicast mac vlan table
net: hns3: Drop depricated mta table support
net: hns3: Fix for rx vlan id handle to support Rev 0x21 hardware
Zhongzhu Liu (1):
net: hns3: Add egress/ingress vlan filter for revision 0x21
drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h | 3 -
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 -
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 78 ++--
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 47 +--
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 446 +++++++++------------
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 40 +-
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 58 ---
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 129 ------
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 5 -
9 files changed, 250 insertions(+), 558 deletions(-)
--
2.7.4
^ permalink raw reply
* [PATCH net-next 1/6] net: hns3: Remove the default mask configuration for mac vlan table
From: Salil Mehta @ 2018-10-05 17:03 UTC (permalink / raw)
To: davem
Cc: salil.mehta, yisen.zhuang, lipeng321, mehta.salil, netdev,
linux-kernel, linuxarm, Jian Shen, Zhongzhu Liu
In-Reply-To: <20181005170329.6512-1-salil.mehta@huawei.com>
From: Jian Shen <shenjian15@huawei.com>
The default mask configuration has been done by firmware, so the driver
doesn't need to do it any more.
Signed-off-by: Zhongzhu Liu <liuzhongzhu@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 10 -------
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 32 ----------------------
2 files changed, 42 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index e5e66b2..26fda05 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -177,7 +177,6 @@ enum hclge_opcode_type {
HCLGE_OPC_MAC_VLAN_INSERT = 0x1003,
HCLGE_OPC_MAC_ETHTYPE_ADD = 0x1010,
HCLGE_OPC_MAC_ETHTYPE_REMOVE = 0x1011,
- HCLGE_OPC_MAC_VLAN_MASK_SET = 0x1012,
/* Multicast linear table commands */
HCLGE_OPC_MTA_MAC_MODE_CFG = 0x1020,
@@ -591,15 +590,6 @@ struct hclge_mac_vlan_tbl_entry_cmd {
u8 rsv2[6];
};
-#define HCLGE_VLAN_MASK_EN_B 0
-struct hclge_mac_vlan_mask_entry_cmd {
- u8 rsv0[2];
- u8 vlan_mask;
- u8 rsv1;
- u8 mac_mask[6];
- u8 rsv2[14];
-};
-
#define HCLGE_MAC_MGR_MASK_VLAN_B BIT(0)
#define HCLGE_MAC_MGR_MASK_MAC_B BIT(1)
#define HCLGE_MAC_MGR_MASK_ETHERTYPE_B BIT(2)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 21ca4af..0106c1b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1939,36 +1939,11 @@ static int hclge_get_autoneg(struct hnae3_handle *handle)
return hdev->hw.mac.autoneg;
}
-static int hclge_set_default_mac_vlan_mask(struct hclge_dev *hdev,
- bool mask_vlan,
- u8 *mac_mask)
-{
- struct hclge_mac_vlan_mask_entry_cmd *req;
- struct hclge_desc desc;
- int status;
-
- req = (struct hclge_mac_vlan_mask_entry_cmd *)desc.data;
- hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MAC_VLAN_MASK_SET, false);
-
- hnae3_set_bit(req->vlan_mask, HCLGE_VLAN_MASK_EN_B,
- mask_vlan ? 1 : 0);
- ether_addr_copy(req->mac_mask, mac_mask);
-
- status = hclge_cmd_send(&hdev->hw, &desc, 1);
- if (status)
- dev_err(&hdev->pdev->dev,
- "Config mac_vlan_mask failed for cmd_send, ret =%d\n",
- status);
-
- return status;
-}
-
static int hclge_mac_init(struct hclge_dev *hdev)
{
struct hnae3_handle *handle = &hdev->vport[0].nic;
struct net_device *netdev = handle->kinfo.netdev;
struct hclge_mac *mac = &hdev->hw.mac;
- u8 mac_mask[ETH_ALEN] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
struct hclge_vport *vport;
int mtu;
int ret;
@@ -2011,13 +1986,6 @@ static int hclge_mac_init(struct hclge_dev *hdev)
}
}
- ret = hclge_set_default_mac_vlan_mask(hdev, true, mac_mask);
- if (ret) {
- dev_err(&hdev->pdev->dev,
- "set default mac_vlan_mask fail ret=%d\n", ret);
- return ret;
- }
-
if (netdev)
mtu = netdev->mtu;
else
--
2.7.4
^ permalink raw reply related
* [PATCH net-next 2/6] net: hns3: Clear mac vlan table entries when unload driver or function reset
From: Salil Mehta @ 2018-10-05 17:03 UTC (permalink / raw)
To: davem
Cc: salil.mehta, yisen.zhuang, lipeng321, mehta.salil, netdev,
linux-kernel, linuxarm, Jian Shen
In-Reply-To: <20181005170329.6512-1-salil.mehta@huawei.com>
From: Jian Shen <shenjian15@huawei.com>
In original codes, the mac vlan table entries are not cleared when
unload hns3 driver. The dirty mac vlan table entries will make the
result of looking up mac vlan table being unexpected.
When doing core reset or global reset, the firmware will clear all
the tables for driver, and driver shouldn't send any commands to
firmware during reset. But when doing function reset, the driver
needs to clear the tables itself.
This patch clears the mac vlan table entries for each client when
unload driver or reset.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 45 +++++++++++++++----------
1 file changed, 28 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index c269256..d8b8ccf 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -21,6 +21,7 @@
static void hns3_clear_all_ring(struct hnae3_handle *h);
static void hns3_force_clear_all_rx_ring(struct hnae3_handle *h);
+static void hns3_remove_hw_addr(struct net_device *netdev);
static const char hns3_driver_name[] = "hns3";
const char hns3_driver_version[] = VERMAGIC_STRING;
@@ -3155,15 +3156,6 @@ static void hns3_init_mac_addr(struct net_device *netdev, bool init)
}
-static void hns3_uninit_mac_addr(struct net_device *netdev)
-{
- struct hns3_nic_priv *priv = netdev_priv(netdev);
- struct hnae3_handle *h = priv->ae_handle;
-
- if (h->ae_algo->ops->rm_uc_addr)
- h->ae_algo->ops->rm_uc_addr(h, netdev->dev_addr);
-}
-
static int hns3_restore_fd_rules(struct net_device *netdev)
{
struct hnae3_handle *h = hns3_get_handle(netdev);
@@ -3296,6 +3288,8 @@ static void hns3_client_uninit(struct hnae3_handle *handle, bool reset)
struct hns3_nic_priv *priv = netdev_priv(netdev);
int ret;
+ hns3_remove_hw_addr(netdev);
+
if (netdev->reg_state != NETREG_UNINITIALIZED)
unregister_netdev(netdev);
@@ -3319,8 +3313,6 @@ static void hns3_client_uninit(struct hnae3_handle *handle, bool reset)
priv->ring_data = NULL;
- hns3_uninit_mac_addr(netdev);
-
free_netdev(netdev);
}
@@ -3392,6 +3384,25 @@ static void hns3_recover_hw_addr(struct net_device *ndev)
hns3_nic_mc_sync(ndev, ha->addr);
}
+static void hns3_remove_hw_addr(struct net_device *netdev)
+{
+ struct netdev_hw_addr_list *list;
+ struct netdev_hw_addr *ha, *tmp;
+
+ hns3_nic_uc_unsync(netdev, netdev->dev_addr);
+
+ /* go through and unsync uc_addr entries to the device */
+ list = &netdev->uc;
+ list_for_each_entry_safe(ha, tmp, &list->list, list)
+ hns3_nic_uc_unsync(netdev, ha->addr);
+
+ /* go through and unsync mc_addr entries to the device */
+ list = &netdev->mc;
+ list_for_each_entry_safe(ha, tmp, &list->list, list)
+ if (ha->refcount > 1)
+ hns3_nic_mc_unsync(netdev, ha->addr);
+}
+
static void hns3_clear_tx_ring(struct hns3_enet_ring *ring)
{
while (ring->next_to_clean != ring->next_to_use) {
@@ -3637,14 +3648,14 @@ static int hns3_reset_notify_uninit_enet(struct hnae3_handle *handle)
if (ret)
netdev_err(netdev, "uninit ring error\n");
- hns3_uninit_mac_addr(netdev);
-
- /* it is cumbersome for hardware to pick-and-choose rules for deletion
- * from TCAM. Hence, for function reset software intervention is
- * required to delete the rules
+ /* it is cumbersome for hardware to pick-and-choose entries for deletion
+ * from table space. Hence, for function reset software intervention is
+ * required to delete the entries
*/
- if (hns3_dev_ongoing_func_reset(ae_dev))
+ if (hns3_dev_ongoing_func_reset(ae_dev)) {
+ hns3_remove_hw_addr(netdev);
hns3_del_all_fd_rules(netdev, false);
+ }
return ret;
}
--
2.7.4
^ permalink raw reply related
* [PATCH net-next 3/6] net: hns3: Optimize for unicast mac vlan table
From: Salil Mehta @ 2018-10-05 17:03 UTC (permalink / raw)
To: davem
Cc: salil.mehta, yisen.zhuang, lipeng321, mehta.salil, netdev,
linux-kernel, linuxarm, Jian Shen
In-Reply-To: <20181005170329.6512-1-salil.mehta@huawei.com>
From: Jian Shen <shenjian15@huawei.com>
In previously implement for unicast mac vlan table, the space is
shared by all the functions, driver does nothing when the space is
exhausted. This patch preallocates the space of unicast mac vlan
table for each function by software. Each function can only use its
private space and available shared space, avoiding single function
exhausts too much space, and other functions are unable to add
unicast mac address.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 11 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 147 ++++++++++++++++++++-
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 18 +++
3 files changed, 174 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index 26fda05..6098dacb 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -175,6 +175,7 @@ enum hclge_opcode_type {
HCLGE_OPC_MAC_VLAN_REMOVE = 0x1001,
HCLGE_OPC_MAC_VLAN_TYPE_ID = 0x1002,
HCLGE_OPC_MAC_VLAN_INSERT = 0x1003,
+ HCLGE_OPC_MAC_VLAN_ALLOCATE = 0x1004,
HCLGE_OPC_MAC_ETHTYPE_ADD = 0x1010,
HCLGE_OPC_MAC_ETHTYPE_REMOVE = 0x1011,
@@ -401,6 +402,8 @@ struct hclge_pf_res_cmd {
#define HCLGE_CFG_RSS_SIZE_M GENMASK(31, 24)
#define HCLGE_CFG_SPEED_ABILITY_S 0
#define HCLGE_CFG_SPEED_ABILITY_M GENMASK(7, 0)
+#define HCLGE_CFG_UMV_TBL_SPACE_S 16
+#define HCLGE_CFG_UMV_TBL_SPACE_M GENMASK(31, 16)
struct hclge_cfg_param_cmd {
__le32 offset;
@@ -590,6 +593,14 @@ struct hclge_mac_vlan_tbl_entry_cmd {
u8 rsv2[6];
};
+#define HCLGE_UMV_SPC_ALC_B 0
+struct hclge_umv_spc_alc_cmd {
+ u8 allocate;
+ u8 rsv1[3];
+ __le32 space_size;
+ u8 rsv2[16];
+};
+
#define HCLGE_MAC_MGR_MASK_VLAN_B BIT(0)
#define HCLGE_MAC_MGR_MASK_MAC_B BIT(1)
#define HCLGE_MAC_MGR_MASK_ETHERTYPE_B BIT(2)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 0106c1b..d346d0a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -31,6 +31,8 @@ static int hclge_set_mta_filter_mode(struct hclge_dev *hdev,
static int hclge_set_mtu(struct hnae3_handle *handle, int new_mtu);
static int hclge_init_vlan_config(struct hclge_dev *hdev);
static int hclge_reset_ae_dev(struct hnae3_ae_dev *ae_dev);
+static int hclge_set_umv_space(struct hclge_dev *hdev, u16 space_size,
+ u16 *allocated_size, bool is_alloc);
static struct hnae3_ae_algo ae_algo;
@@ -778,6 +780,11 @@ static void hclge_parse_cfg(struct hclge_cfg *cfg, struct hclge_desc *desc)
cfg->speed_ability = hnae3_get_field(__le32_to_cpu(req->param[1]),
HCLGE_CFG_SPEED_ABILITY_M,
HCLGE_CFG_SPEED_ABILITY_S);
+ cfg->umv_space = hnae3_get_field(__le32_to_cpu(req->param[1]),
+ HCLGE_CFG_UMV_TBL_SPACE_M,
+ HCLGE_CFG_UMV_TBL_SPACE_S);
+ if (!cfg->umv_space)
+ cfg->umv_space = HCLGE_DEFAULT_UMV_SPACE_PER_PF;
}
/* hclge_get_cfg: query the static parameter from flash
@@ -856,6 +863,7 @@ static int hclge_configure(struct hclge_dev *hdev)
hdev->tm_info.num_pg = 1;
hdev->tc_max = cfg.tc_num;
hdev->tm_info.hw_pfc_map = 0;
+ hdev->wanted_umv_size = cfg.umv_space;
ret = hclge_parse_speed(cfg.default_speed, &hdev->hw.mac.speed);
if (ret) {
@@ -5237,6 +5245,118 @@ static int hclge_add_mac_vlan_tbl(struct hclge_vport *vport,
return cfg_status;
}
+static int hclge_init_umv_space(struct hclge_dev *hdev)
+{
+ u16 allocated_size = 0;
+ int ret;
+
+ ret = hclge_set_umv_space(hdev, hdev->wanted_umv_size, &allocated_size,
+ true);
+ if (ret)
+ return ret;
+
+ if (allocated_size < hdev->wanted_umv_size)
+ dev_warn(&hdev->pdev->dev,
+ "Alloc umv space failed, want %d, get %d\n",
+ hdev->wanted_umv_size, allocated_size);
+
+ mutex_init(&hdev->umv_mutex);
+ hdev->max_umv_size = allocated_size;
+ hdev->priv_umv_size = hdev->max_umv_size / (hdev->num_req_vfs + 2);
+ hdev->share_umv_size = hdev->priv_umv_size +
+ hdev->max_umv_size % (hdev->num_req_vfs + 2);
+
+ return 0;
+}
+
+static int hclge_uninit_umv_space(struct hclge_dev *hdev)
+{
+ int ret;
+
+ if (hdev->max_umv_size > 0) {
+ ret = hclge_set_umv_space(hdev, hdev->max_umv_size, NULL,
+ false);
+ if (ret)
+ return ret;
+ hdev->max_umv_size = 0;
+ }
+ mutex_destroy(&hdev->umv_mutex);
+
+ return 0;
+}
+
+static int hclge_set_umv_space(struct hclge_dev *hdev, u16 space_size,
+ u16 *allocated_size, bool is_alloc)
+{
+ struct hclge_umv_spc_alc_cmd *req;
+ struct hclge_desc desc;
+ int ret;
+
+ req = (struct hclge_umv_spc_alc_cmd *)desc.data;
+ hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MAC_VLAN_ALLOCATE, false);
+ hnae3_set_bit(req->allocate, HCLGE_UMV_SPC_ALC_B, !is_alloc);
+ req->space_size = cpu_to_le32(space_size);
+
+ ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+ if (ret) {
+ dev_err(&hdev->pdev->dev,
+ "%s umv space failed for cmd_send, ret =%d\n",
+ is_alloc ? "allocate" : "free", ret);
+ return ret;
+ }
+
+ if (is_alloc && allocated_size)
+ *allocated_size = le32_to_cpu(desc.data[1]);
+
+ return 0;
+}
+
+static void hclge_reset_umv_space(struct hclge_dev *hdev)
+{
+ struct hclge_vport *vport;
+ int i;
+
+ for (i = 0; i < hdev->num_alloc_vport; i++) {
+ vport = &hdev->vport[i];
+ vport->used_umv_num = 0;
+ }
+
+ mutex_lock(&hdev->umv_mutex);
+ hdev->share_umv_size = hdev->priv_umv_size +
+ hdev->max_umv_size % (hdev->num_req_vfs + 2);
+ mutex_unlock(&hdev->umv_mutex);
+}
+
+static bool hclge_is_umv_space_full(struct hclge_vport *vport)
+{
+ struct hclge_dev *hdev = vport->back;
+ bool is_full;
+
+ mutex_lock(&hdev->umv_mutex);
+ is_full = (vport->used_umv_num >= hdev->priv_umv_size &&
+ hdev->share_umv_size == 0);
+ mutex_unlock(&hdev->umv_mutex);
+
+ return is_full;
+}
+
+static void hclge_update_umv_space(struct hclge_vport *vport, bool is_free)
+{
+ struct hclge_dev *hdev = vport->back;
+
+ mutex_lock(&hdev->umv_mutex);
+ if (is_free) {
+ if (vport->used_umv_num > hdev->priv_umv_size)
+ hdev->share_umv_size++;
+ vport->used_umv_num--;
+ } else {
+ if (vport->used_umv_num >= hdev->priv_umv_size)
+ hdev->share_umv_size--;
+ vport->used_umv_num++;
+ }
+ mutex_unlock(&hdev->umv_mutex);
+}
+
static int hclge_add_uc_addr(struct hnae3_handle *handle,
const unsigned char *addr)
{
@@ -5282,8 +5402,19 @@ int hclge_add_uc_addr_common(struct hclge_vport *vport,
* is not allowed in the mac vlan table.
*/
ret = hclge_lookup_mac_vlan_tbl(vport, &req, &desc, false);
- if (ret == -ENOENT)
- return hclge_add_mac_vlan_tbl(vport, &req, NULL);
+ if (ret == -ENOENT) {
+ if (!hclge_is_umv_space_full(vport)) {
+ ret = hclge_add_mac_vlan_tbl(vport, &req, NULL);
+ if (!ret)
+ hclge_update_umv_space(vport, false);
+ return ret;
+ }
+
+ dev_err(&hdev->pdev->dev, "UC MAC table full(%u)\n",
+ hdev->priv_umv_size);
+
+ return -ENOSPC;
+ }
/* check if we just hit the duplicate */
if (!ret)
@@ -5326,6 +5457,8 @@ int hclge_rm_uc_addr_common(struct hclge_vport *vport,
hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
hclge_prepare_mac_addr(&req, addr);
ret = hclge_remove_mac_vlan_tbl(vport, &req);
+ if (!ret)
+ hclge_update_umv_space(vport, true);
return ret;
}
@@ -6714,6 +6847,12 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev)
}
}
+ ret = hclge_init_umv_space(hdev);
+ if (ret) {
+ dev_err(&pdev->dev, "umv space init error, ret=%d.\n", ret);
+ goto err_msi_irq_uninit;
+ }
+
ret = hclge_mac_init(hdev);
if (ret) {
dev_err(&pdev->dev, "Mac init error, ret = %d\n", ret);
@@ -6834,6 +6973,8 @@ static int hclge_reset_ae_dev(struct hnae3_ae_dev *ae_dev)
return ret;
}
+ hclge_reset_umv_space(hdev);
+
ret = hclge_mac_init(hdev);
if (ret) {
dev_err(&pdev->dev, "Mac init error, ret = %d\n", ret);
@@ -6887,6 +7028,8 @@ static void hclge_uninit_ae_dev(struct hnae3_ae_dev *ae_dev)
if (mac->phydev)
mdiobus_unregister(mac->mdio_bus);
+ hclge_uninit_umv_space(hdev);
+
/* Disable MISC vector(vector0) */
hclge_enable_vector(&hdev->misc_vector, false);
synchronize_irq(hdev->misc_vector.vector_irq);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 06adbdd..d0c7c62 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -14,6 +14,8 @@
#define HCLGE_MOD_VERSION "1.0"
#define HCLGE_DRIVER_NAME "hclge"
+#define HCLGE_MAX_PF_NUM 8
+
#define HCLGE_INVALID_VPORT 0xffff
#define HCLGE_PF_CFG_BLOCK_SIZE 32
@@ -53,6 +55,10 @@
#define HCLGE_RSS_TC_SIZE_6 64
#define HCLGE_RSS_TC_SIZE_7 128
+#define HCLGE_UMV_TBL_SIZE 3072
+#define HCLGE_DEFAULT_UMV_SPACE_PER_PF \
+ (HCLGE_UMV_TBL_SIZE / HCLGE_MAX_PF_NUM)
+
#define HCLGE_MTA_TBL_SIZE 4096
#define HCLGE_TQP_RESET_TRY_TIMES 10
@@ -251,6 +257,7 @@ struct hclge_cfg {
u8 default_speed;
u32 numa_node_map;
u8 speed_ability;
+ u16 umv_space;
};
struct hclge_tm_info {
@@ -680,6 +687,15 @@ struct hclge_dev {
struct hclge_fd_cfg fd_cfg;
struct hlist_head fd_rule_list;
u16 hclge_fd_rule_num;
+
+ u16 wanted_umv_size;
+ /* max available unicast mac vlan space */
+ u16 max_umv_size;
+ /* private unicast mac vlan space, it's same for PF and its VFs */
+ u16 priv_umv_size;
+ /* unicast mac vlan space shared by PF and its VFs */
+ u16 share_umv_size;
+ struct mutex umv_mutex; /* protect share_umv_size */
};
/* VPort level vlan tag configuration for TX direction */
@@ -732,6 +748,8 @@ struct hclge_vport {
struct hclge_tx_vtag_cfg txvlan_cfg;
struct hclge_rx_vtag_cfg rxvlan_cfg;
+ u16 used_umv_num;
+
int vport_id;
struct hclge_dev *back; /* Back reference to associated dev */
struct hnae3_handle nic;
--
2.7.4
^ permalink raw reply related
* [PATCH net-next 4/6] net: hns3: Drop depricated mta table support
From: Salil Mehta @ 2018-10-05 17:03 UTC (permalink / raw)
To: davem
Cc: salil.mehta, yisen.zhuang, lipeng321, mehta.salil, netdev,
linux-kernel, linuxarm, Jian Shen, Zhongzhu Liu
In-Reply-To: <20181005170329.6512-1-salil.mehta@huawei.com>
From: Jian Shen <shenjian15@huawei.com>
For mta table support has been dropped, remove the code for mta table.
Signed-off-by: Zhongzhu Liu <liuzhongzhu@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h | 3 -
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 -
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 3 -
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 30 ---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 222 +--------------------
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 24 ---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 58 ------
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 129 ------------
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 5 -
9 files changed, 2 insertions(+), 474 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
index be9dc08..038326c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
@@ -46,9 +46,6 @@ enum hclge_mbx_mac_vlan_subcode {
HCLGE_MBX_MAC_VLAN_MC_MODIFY, /* modify MC mac addr */
HCLGE_MBX_MAC_VLAN_MC_ADD, /* add new MC mac addr */
HCLGE_MBX_MAC_VLAN_MC_REMOVE, /* remove MC mac addr */
- HCLGE_MBX_MAC_VLAN_MC_FUNC_MTA_ENABLE, /* config func MTA enable */
- HCLGE_MBX_MAC_VLAN_MTA_TYPE_READ, /* read func MTA type */
- HCLGE_MBX_MAC_VLAN_MTA_STATUS_UPDATE, /* update MTA status */
};
/* below are per-VF vlan cfg subcodes */
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index 591ee2e..1b49c5d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -355,8 +355,6 @@ struct hnae3_ae_ops {
const unsigned char *addr);
int (*rm_mc_addr)(struct hnae3_handle *handle,
const unsigned char *addr);
- int (*update_mta_status)(struct hnae3_handle *handle);
-
void (*set_tso_stats)(struct hnae3_handle *handle, int enable);
void (*update_stats)(struct hnae3_handle *handle,
struct net_device_stats *net_stats);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index d8b8ccf..3f36c38 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -476,9 +476,6 @@ static void hns3_nic_set_rx_mode(struct net_device *netdev)
if (netdev->flags & IFF_MULTICAST) {
if (__dev_mc_sync(netdev, hns3_nic_mc_sync, hns3_nic_mc_unsync))
netdev_err(netdev, "sync mc address fail\n");
-
- if (h->ae_algo->ops->update_mta_status)
- h->ae_algo->ops->update_mta_status(h);
}
}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index 6098dacb..1ccde67 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -179,12 +179,6 @@ enum hclge_opcode_type {
HCLGE_OPC_MAC_ETHTYPE_ADD = 0x1010,
HCLGE_OPC_MAC_ETHTYPE_REMOVE = 0x1011,
- /* Multicast linear table commands */
- HCLGE_OPC_MTA_MAC_MODE_CFG = 0x1020,
- HCLGE_OPC_MTA_MAC_FUNC_CFG = 0x1021,
- HCLGE_OPC_MTA_TBL_ITEM_CFG = 0x1022,
- HCLGE_OPC_MTA_TBL_ITEM_QUERY = 0x1023,
-
/* VLAN commands */
HCLGE_OPC_VLAN_FILTER_CTRL = 0x1100,
HCLGE_OPC_VLAN_FILTER_PF_CFG = 0x1101,
@@ -623,30 +617,6 @@ struct hclge_mac_mgr_tbl_entry_cmd {
u8 rsv3[2];
};
-#define HCLGE_CFG_MTA_MAC_SEL_S 0
-#define HCLGE_CFG_MTA_MAC_SEL_M GENMASK(1, 0)
-#define HCLGE_CFG_MTA_MAC_EN_B 7
-struct hclge_mta_filter_mode_cmd {
- u8 dmac_sel_en; /* Use lowest 2 bit as sel_mode, bit 7 as enable */
- u8 rsv[23];
-};
-
-#define HCLGE_CFG_FUNC_MTA_ACCEPT_B 0
-struct hclge_cfg_func_mta_filter_cmd {
- u8 accept; /* Only used lowest 1 bit */
- u8 function_id;
- u8 rsv[22];
-};
-
-#define HCLGE_CFG_MTA_ITEM_ACCEPT_B 0
-#define HCLGE_CFG_MTA_ITEM_IDX_S 0
-#define HCLGE_CFG_MTA_ITEM_IDX_M GENMASK(11, 0)
-struct hclge_cfg_func_mta_item_cmd {
- __le16 item_idx; /* Only used lowest 12 bit */
- u8 accept; /* Only used lowest 1 bit */
- u8 rsv[21];
-};
-
struct hclge_mac_vlan_add_cmd {
__le16 flags;
__le16 mac_addr_hi16;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index d346d0a..d95ea9b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -25,9 +25,6 @@
#define HCLGE_STATS_READ(p, offset) (*((u64 *)((u8 *)(p) + (offset))))
#define HCLGE_MAC_STATS_FIELD_OFF(f) (offsetof(struct hclge_mac_stats, f))
-static int hclge_set_mta_filter_mode(struct hclge_dev *hdev,
- enum hclge_mta_dmac_sel_type mta_mac_sel,
- bool enable);
static int hclge_set_mtu(struct hnae3_handle *handle, int new_mtu);
static int hclge_init_vlan_config(struct hclge_dev *hdev);
static int hclge_reset_ae_dev(struct hnae3_ae_dev *ae_dev);
@@ -1952,10 +1949,8 @@ static int hclge_mac_init(struct hclge_dev *hdev)
struct hnae3_handle *handle = &hdev->vport[0].nic;
struct net_device *netdev = handle->kinfo.netdev;
struct hclge_mac *mac = &hdev->hw.mac;
- struct hclge_vport *vport;
int mtu;
int ret;
- int i;
hdev->hw.mac.duplex = HCLGE_MAC_FULL;
ret = hclge_cfg_mac_speed_dup_hw(hdev, hdev->hw.mac.speed,
@@ -1968,32 +1963,6 @@ static int hclge_mac_init(struct hclge_dev *hdev)
mac->link = 0;
- /* Initialize the MTA table work mode */
- hdev->enable_mta = true;
- hdev->mta_mac_sel_type = HCLGE_MAC_ADDR_47_36;
-
- ret = hclge_set_mta_filter_mode(hdev,
- hdev->mta_mac_sel_type,
- hdev->enable_mta);
- if (ret) {
- dev_err(&hdev->pdev->dev, "set mta filter mode failed %d\n",
- ret);
- return ret;
- }
-
- for (i = 0; i < hdev->num_alloc_vport; i++) {
- vport = &hdev->vport[i];
- vport->accept_mta_mc = false;
-
- memset(vport->mta_shadow, 0, sizeof(vport->mta_shadow));
- ret = hclge_cfg_func_mta_filter(hdev, vport->vport_id, false);
- if (ret) {
- dev_err(&hdev->pdev->dev,
- "set mta filter mode fail ret=%d\n", ret);
- return ret;
- }
- }
-
if (netdev)
mtu = netdev->mtu;
else
@@ -4954,174 +4923,6 @@ static void hclge_prepare_mac_addr(struct hclge_mac_vlan_tbl_entry_cmd *new_req,
new_req->mac_addr_lo16 = cpu_to_le16(low_val & 0xffff);
}
-static u16 hclge_get_mac_addr_to_mta_index(struct hclge_vport *vport,
- const u8 *addr)
-{
- u16 high_val = addr[1] | (addr[0] << 8);
- struct hclge_dev *hdev = vport->back;
- u32 rsh = 4 - hdev->mta_mac_sel_type;
- u16 ret_val = (high_val >> rsh) & 0xfff;
-
- return ret_val;
-}
-
-static int hclge_set_mta_filter_mode(struct hclge_dev *hdev,
- enum hclge_mta_dmac_sel_type mta_mac_sel,
- bool enable)
-{
- struct hclge_mta_filter_mode_cmd *req;
- struct hclge_desc desc;
- int ret;
-
- req = (struct hclge_mta_filter_mode_cmd *)desc.data;
- hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MTA_MAC_MODE_CFG, false);
-
- hnae3_set_bit(req->dmac_sel_en, HCLGE_CFG_MTA_MAC_EN_B,
- enable);
- hnae3_set_field(req->dmac_sel_en, HCLGE_CFG_MTA_MAC_SEL_M,
- HCLGE_CFG_MTA_MAC_SEL_S, mta_mac_sel);
-
- ret = hclge_cmd_send(&hdev->hw, &desc, 1);
- if (ret)
- dev_err(&hdev->pdev->dev,
- "Config mat filter mode failed for cmd_send, ret =%d.\n",
- ret);
-
- return ret;
-}
-
-int hclge_cfg_func_mta_filter(struct hclge_dev *hdev,
- u8 func_id,
- bool enable)
-{
- struct hclge_cfg_func_mta_filter_cmd *req;
- struct hclge_desc desc;
- int ret;
-
- req = (struct hclge_cfg_func_mta_filter_cmd *)desc.data;
- hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MTA_MAC_FUNC_CFG, false);
-
- hnae3_set_bit(req->accept, HCLGE_CFG_FUNC_MTA_ACCEPT_B,
- enable);
- req->function_id = func_id;
-
- ret = hclge_cmd_send(&hdev->hw, &desc, 1);
- if (ret)
- dev_err(&hdev->pdev->dev,
- "Config func_id enable failed for cmd_send, ret =%d.\n",
- ret);
-
- return ret;
-}
-
-static int hclge_set_mta_table_item(struct hclge_vport *vport,
- u16 idx,
- bool enable)
-{
- struct hclge_dev *hdev = vport->back;
- struct hclge_cfg_func_mta_item_cmd *req;
- struct hclge_desc desc;
- u16 item_idx = 0;
- int ret;
-
- req = (struct hclge_cfg_func_mta_item_cmd *)desc.data;
- hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MTA_TBL_ITEM_CFG, false);
- hnae3_set_bit(req->accept, HCLGE_CFG_MTA_ITEM_ACCEPT_B, enable);
-
- hnae3_set_field(item_idx, HCLGE_CFG_MTA_ITEM_IDX_M,
- HCLGE_CFG_MTA_ITEM_IDX_S, idx);
- req->item_idx = cpu_to_le16(item_idx);
-
- ret = hclge_cmd_send(&hdev->hw, &desc, 1);
- if (ret) {
- dev_err(&hdev->pdev->dev,
- "Config mta table item failed for cmd_send, ret =%d.\n",
- ret);
- return ret;
- }
-
- if (enable)
- set_bit(idx, vport->mta_shadow);
- else
- clear_bit(idx, vport->mta_shadow);
-
- return 0;
-}
-
-static int hclge_update_mta_status(struct hnae3_handle *handle)
-{
- unsigned long mta_status[BITS_TO_LONGS(HCLGE_MTA_TBL_SIZE)];
- struct hclge_vport *vport = hclge_get_vport(handle);
- struct net_device *netdev = handle->kinfo.netdev;
- struct netdev_hw_addr *ha;
- u16 tbl_idx;
-
- memset(mta_status, 0, sizeof(mta_status));
-
- /* update mta_status from mc addr list */
- netdev_for_each_mc_addr(ha, netdev) {
- tbl_idx = hclge_get_mac_addr_to_mta_index(vport, ha->addr);
- set_bit(tbl_idx, mta_status);
- }
-
- return hclge_update_mta_status_common(vport, mta_status,
- 0, HCLGE_MTA_TBL_SIZE, true);
-}
-
-int hclge_update_mta_status_common(struct hclge_vport *vport,
- unsigned long *status,
- u16 idx,
- u16 count,
- bool update_filter)
-{
- struct hclge_dev *hdev = vport->back;
- u16 update_max = idx + count;
- u16 check_max;
- int ret = 0;
- bool used;
- u16 i;
-
- /* setup mta check range */
- if (update_filter) {
- i = 0;
- check_max = HCLGE_MTA_TBL_SIZE;
- } else {
- i = idx;
- check_max = update_max;
- }
-
- used = false;
- /* check and update all mta item */
- for (; i < check_max; i++) {
- /* ignore unused item */
- if (!test_bit(i, vport->mta_shadow))
- continue;
-
- /* if i in update range then update it */
- if (i >= idx && i < update_max)
- if (!test_bit(i - idx, status))
- hclge_set_mta_table_item(vport, i, false);
-
- if (!used && test_bit(i, vport->mta_shadow))
- used = true;
- }
-
- /* no longer use mta, disable it */
- if (vport->accept_mta_mc && update_filter && !used) {
- ret = hclge_cfg_func_mta_filter(hdev,
- vport->vport_id,
- false);
- if (ret)
- dev_err(&hdev->pdev->dev,
- "disable func mta filter fail ret=%d\n",
- ret);
- else
- vport->accept_mta_mc = false;
- }
-
- return ret;
-}
-
static int hclge_remove_mac_vlan_tbl(struct hclge_vport *vport,
struct hclge_mac_vlan_tbl_entry_cmd *req)
{
@@ -5477,7 +5278,6 @@ int hclge_add_mc_addr_common(struct hclge_vport *vport,
struct hclge_dev *hdev = vport->back;
struct hclge_mac_vlan_tbl_entry_cmd req;
struct hclge_desc desc[3];
- u16 tbl_idx;
int status;
/* mac addr check */
@@ -5507,25 +5307,8 @@ int hclge_add_mc_addr_common(struct hclge_vport *vport,
status = hclge_add_mac_vlan_tbl(vport, &req, desc);
}
- /* If mc mac vlan table is full, use MTA table */
- if (status == -ENOSPC) {
- if (!vport->accept_mta_mc) {
- status = hclge_cfg_func_mta_filter(hdev,
- vport->vport_id,
- true);
- if (status) {
- dev_err(&hdev->pdev->dev,
- "set mta filter mode fail ret=%d\n",
- status);
- return status;
- }
- vport->accept_mta_mc = true;
- }
-
- /* Set MTA table for this MAC address */
- tbl_idx = hclge_get_mac_addr_to_mta_index(vport, addr);
- status = hclge_set_mta_table_item(vport, tbl_idx, true);
- }
+ if (status == -ENOSPC)
+ dev_err(&hdev->pdev->dev, "mc mac vlan table is full\n");
return status;
}
@@ -7428,7 +7211,6 @@ static const struct hnae3_ae_ops hclge_ops = {
.rm_uc_addr = hclge_rm_uc_addr,
.add_mc_addr = hclge_add_mc_addr,
.rm_mc_addr = hclge_rm_mc_addr,
- .update_mta_status = hclge_update_mta_status,
.set_autoneg = hclge_set_autoneg,
.get_autoneg = hclge_get_autoneg,
.get_pauseparam = hclge_get_pauseparam,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index d0c7c62..e3dfd65 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -59,8 +59,6 @@
#define HCLGE_DEFAULT_UMV_SPACE_PER_PF \
(HCLGE_UMV_TBL_SIZE / HCLGE_MAX_PF_NUM)
-#define HCLGE_MTA_TBL_SIZE 4096
-
#define HCLGE_TQP_RESET_TRY_TIMES 10
#define HCLGE_PHY_PAGE_MDIX 0
@@ -168,13 +166,6 @@ enum HCLGE_MAC_DUPLEX {
HCLGE_MAC_FULL
};
-enum hclge_mta_dmac_sel_type {
- HCLGE_MAC_ADDR_47_36,
- HCLGE_MAC_ADDR_46_35,
- HCLGE_MAC_ADDR_45_34,
- HCLGE_MAC_ADDR_44_33,
-};
-
struct hclge_mac {
u8 phy_addr;
u8 flag;
@@ -677,9 +668,6 @@ struct hclge_dev {
u32 pkt_buf_size; /* Total pf buf size for tx/rx */
u32 mps; /* Max packet size */
- enum hclge_mta_dmac_sel_type mta_mac_sel_type;
- bool enable_mta; /* Multicast filter enable */
-
struct hclge_vlan_type_cfg vlan_type_cfg;
unsigned long vlan_table[VLAN_N_VID][BITS_TO_LONGS(HCLGE_VPORT_NUM)];
@@ -754,9 +742,6 @@ struct hclge_vport {
struct hclge_dev *back; /* Back reference to associated dev */
struct hnae3_handle nic;
struct hnae3_handle roce;
-
- bool accept_mta_mc; /* whether to accept mta filter multicast */
- unsigned long mta_shadow[BITS_TO_LONGS(HCLGE_MTA_TBL_SIZE)];
};
void hclge_promisc_param_init(struct hclge_promisc_param *param, bool en_uc,
@@ -771,15 +756,6 @@ int hclge_add_mc_addr_common(struct hclge_vport *vport,
int hclge_rm_mc_addr_common(struct hclge_vport *vport,
const unsigned char *addr);
-int hclge_cfg_func_mta_filter(struct hclge_dev *hdev,
- u8 func_id,
- bool enable);
-int hclge_update_mta_status_common(struct hclge_vport *vport,
- unsigned long *status,
- u16 idx,
- u16 count,
- bool update_filter);
-
struct hclge_vport *hclge_get_vport(struct hnae3_handle *handle);
int hclge_bind_ring_with_vector(struct hclge_vport *vport,
int vector_id, bool en,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index f34851c..04462a3 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -233,43 +233,6 @@ static int hclge_set_vf_uc_mac_addr(struct hclge_vport *vport,
return 0;
}
-static int hclge_set_vf_mc_mta_status(struct hclge_vport *vport,
- u8 *msg, u8 idx, bool is_end)
-{
-#define HCLGE_MTA_STATUS_MSG_SIZE 13
-#define HCLGE_MTA_STATUS_MSG_BITS \
- (HCLGE_MTA_STATUS_MSG_SIZE * BITS_PER_BYTE)
-#define HCLGE_MTA_STATUS_MSG_END_BITS \
- (HCLGE_MTA_TBL_SIZE % HCLGE_MTA_STATUS_MSG_BITS)
- unsigned long status[BITS_TO_LONGS(HCLGE_MTA_STATUS_MSG_BITS)];
- u16 tbl_cnt;
- u16 tbl_idx;
- u8 msg_ofs;
- u8 msg_bit;
-
- tbl_cnt = is_end ? HCLGE_MTA_STATUS_MSG_END_BITS :
- HCLGE_MTA_STATUS_MSG_BITS;
-
- /* set msg field */
- msg_ofs = 0;
- msg_bit = 0;
- memset(status, 0, sizeof(status));
- for (tbl_idx = 0; tbl_idx < tbl_cnt; tbl_idx++) {
- if (msg[msg_ofs] & BIT(msg_bit))
- set_bit(tbl_idx, status);
-
- msg_bit++;
- if (msg_bit == BITS_PER_BYTE) {
- msg_bit = 0;
- msg_ofs++;
- }
- }
-
- return hclge_update_mta_status_common(vport,
- status, idx * HCLGE_MTA_STATUS_MSG_BITS,
- tbl_cnt, is_end);
-}
-
static int hclge_set_vf_mc_mac_addr(struct hclge_vport *vport,
struct hclge_mbx_vf_to_pf_cmd *mbx_req,
bool gen_resp)
@@ -284,27 +247,6 @@ static int hclge_set_vf_mc_mac_addr(struct hclge_vport *vport,
status = hclge_add_mc_addr_common(vport, mac_addr);
} else if (mbx_req->msg[1] == HCLGE_MBX_MAC_VLAN_MC_REMOVE) {
status = hclge_rm_mc_addr_common(vport, mac_addr);
- } else if (mbx_req->msg[1] == HCLGE_MBX_MAC_VLAN_MC_FUNC_MTA_ENABLE) {
- u8 func_id = vport->vport_id;
- bool enable = mbx_req->msg[2];
-
- status = hclge_cfg_func_mta_filter(hdev, func_id, enable);
- } else if (mbx_req->msg[1] == HCLGE_MBX_MAC_VLAN_MTA_TYPE_READ) {
- resp_data = hdev->mta_mac_sel_type;
- resp_len = sizeof(u8);
- gen_resp = true;
- status = 0;
- } else if (mbx_req->msg[1] == HCLGE_MBX_MAC_VLAN_MTA_STATUS_UPDATE) {
- /* mta status update msg format
- * msg[2.6 : 2.0] msg index
- * msg[2.7] msg is end
- * msg[15 : 3] mta status bits[103 : 0]
- */
- bool is_end = (mbx_req->msg[2] & 0x80) ? true : false;
-
- status = hclge_set_vf_mc_mta_status(vport, &mbx_req->msg[3],
- mbx_req->msg[2] & 0x7F,
- is_end);
} else {
dev_err(&hdev->pdev->dev,
"failed to set mcast mac addr, unknown subcode %d\n",
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 8f858cb..ca4a9f7 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -746,126 +746,6 @@ static void hclgevf_reset_tqp_stats(struct hnae3_handle *handle)
}
}
-static int hclgevf_cfg_func_mta_type(struct hclgevf_dev *hdev)
-{
- u8 resp_msg = HCLGEVF_MTA_TYPE_SEL_MAX;
- int ret;
-
- ret = hclgevf_send_mbx_msg(hdev, HCLGE_MBX_SET_MULTICAST,
- HCLGE_MBX_MAC_VLAN_MTA_TYPE_READ,
- NULL, 0, true, &resp_msg, sizeof(u8));
-
- if (ret) {
- dev_err(&hdev->pdev->dev,
- "Read mta type fail, ret=%d.\n", ret);
- return ret;
- }
-
- if (resp_msg > HCLGEVF_MTA_TYPE_SEL_MAX) {
- dev_err(&hdev->pdev->dev,
- "Read mta type invalid, resp=%d.\n", resp_msg);
- return -EINVAL;
- }
-
- hdev->mta_mac_sel_type = resp_msg;
-
- return 0;
-}
-
-static u16 hclgevf_get_mac_addr_to_mta_index(struct hclgevf_dev *hdev,
- const u8 *addr)
-{
- u32 rsh = HCLGEVF_MTA_TYPE_SEL_MAX - hdev->mta_mac_sel_type;
- u16 high_val = addr[1] | (addr[0] << 8);
-
- return (high_val >> rsh) & 0xfff;
-}
-
-static int hclgevf_do_update_mta_status(struct hclgevf_dev *hdev,
- unsigned long *status)
-{
-#define HCLGEVF_MTA_STATUS_MSG_SIZE 13
-#define HCLGEVF_MTA_STATUS_MSG_BITS \
- (HCLGEVF_MTA_STATUS_MSG_SIZE * BITS_PER_BYTE)
-#define HCLGEVF_MTA_STATUS_MSG_END_BITS \
- (HCLGEVF_MTA_TBL_SIZE % HCLGEVF_MTA_STATUS_MSG_BITS)
- u16 tbl_cnt;
- u16 tbl_idx;
- u8 msg_cnt;
- u8 msg_idx;
- int ret;
-
- msg_cnt = DIV_ROUND_UP(HCLGEVF_MTA_TBL_SIZE,
- HCLGEVF_MTA_STATUS_MSG_BITS);
- tbl_idx = 0;
- msg_idx = 0;
- while (msg_cnt--) {
- u8 msg[HCLGEVF_MTA_STATUS_MSG_SIZE + 1];
- u8 *p = &msg[1];
- u8 msg_ofs;
- u8 msg_bit;
-
- memset(msg, 0, sizeof(msg));
-
- /* set index field */
- msg[0] = 0x7F & msg_idx;
-
- /* set end flag field */
- if (msg_cnt == 0) {
- msg[0] |= 0x80;
- tbl_cnt = HCLGEVF_MTA_STATUS_MSG_END_BITS;
- } else {
- tbl_cnt = HCLGEVF_MTA_STATUS_MSG_BITS;
- }
-
- /* set status field */
- msg_ofs = 0;
- msg_bit = 0;
- while (tbl_cnt--) {
- if (test_bit(tbl_idx, status))
- p[msg_ofs] |= BIT(msg_bit);
-
- tbl_idx++;
-
- msg_bit++;
- if (msg_bit == BITS_PER_BYTE) {
- msg_bit = 0;
- msg_ofs++;
- }
- }
-
- ret = hclgevf_send_mbx_msg(hdev, HCLGE_MBX_SET_MULTICAST,
- HCLGE_MBX_MAC_VLAN_MTA_STATUS_UPDATE,
- msg, sizeof(msg), false, NULL, 0);
- if (ret)
- break;
-
- msg_idx++;
- }
-
- return ret;
-}
-
-static int hclgevf_update_mta_status(struct hnae3_handle *handle)
-{
- unsigned long mta_status[BITS_TO_LONGS(HCLGEVF_MTA_TBL_SIZE)];
- struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
- struct net_device *netdev = hdev->nic.kinfo.netdev;
- struct netdev_hw_addr *ha;
- u16 tbl_idx;
-
- /* clear status */
- memset(mta_status, 0, sizeof(mta_status));
-
- /* update status from mc addr list */
- netdev_for_each_mc_addr(ha, netdev) {
- tbl_idx = hclgevf_get_mac_addr_to_mta_index(hdev, ha->addr);
- set_bit(tbl_idx, mta_status);
- }
-
- return hclgevf_do_update_mta_status(hdev, mta_status);
-}
-
static void hclgevf_get_mac_addr(struct hnae3_handle *handle, u8 *p)
{
struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
@@ -1871,14 +1751,6 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev)
goto err_config;
}
- /* Initialize mta type for this VF */
- ret = hclgevf_cfg_func_mta_type(hdev);
- if (ret) {
- dev_err(&hdev->pdev->dev,
- "failed(%d) to initialize MTA type\n", ret);
- goto err_config;
- }
-
/* Initialize RSS for this VF */
ret = hclgevf_rss_init_hw(hdev);
if (ret) {
@@ -2038,7 +1910,6 @@ static const struct hnae3_ae_ops hclgevf_ops = {
.rm_uc_addr = hclgevf_rm_uc_addr,
.add_mc_addr = hclgevf_add_mc_addr,
.rm_mc_addr = hclgevf_rm_mc_addr,
- .update_mta_status = hclgevf_update_mta_status,
.get_stats = hclgevf_get_stats,
.update_stats = hclgevf_update_stats,
.get_strings = hclgevf_get_strings,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
index 2af01f1..cf5fbf7 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
@@ -47,9 +47,6 @@
#define HCLGEVF_RSS_CFG_TBL_NUM \
(HCLGEVF_RSS_IND_TBL_SIZE / HCLGEVF_RSS_CFG_TBL_SIZE)
-#define HCLGEVF_MTA_TBL_SIZE 4096
-#define HCLGEVF_MTA_TYPE_SEL_MAX 4
-
/* states of hclgevf device & tasks */
enum hclgevf_states {
/* device states */
@@ -157,8 +154,6 @@ struct hclgevf_dev {
u16 *vector_status;
int *vector_irq;
- bool accept_mta_mc; /* whether to accept mta filter multicast */
- u8 mta_mac_sel_type;
bool mbx_event_pending;
struct hclgevf_mbx_resp_status mbx_resp; /* mailbox response */
struct hclgevf_mbx_arq_ring arq; /* mailbox async rx queue */
--
2.7.4
^ permalink raw reply related
* Re: [PATCH] bpf: fix building without CONFIG_INET
From: Joe Stringer @ 2018-10-05 17:19 UTC (permalink / raw)
To: arnd
Cc: ast, daniel, David Miller, john fastabend, Martin KaFai Lau,
makita.toshiaki, brakmo, rdna, Jesper Brouer, jakub.kicinski,
m.xhonneux, dsahern, netdev, LKML
In-Reply-To: <20181005161526.843924-1-arnd@arndb.de>
On Fri, 5 Oct 2018 at 09:16, Arnd Bergmann <arnd@arndb.de> wrote:
>
> The newly added TCP and UDP handling fails to link when CONFIG_INET
> is disabled:
>
> net/core/filter.o: In function `sk_lookup':
> filter.c:(.text+0x7ff8): undefined reference to `tcp_hashinfo'
> filter.c:(.text+0x7ffc): undefined reference to `tcp_hashinfo'
> filter.c:(.text+0x8020): undefined reference to `__inet_lookup_established'
> filter.c:(.text+0x8058): undefined reference to `__inet_lookup_listener'
> filter.c:(.text+0x8068): undefined reference to `udp_table'
> filter.c:(.text+0x8070): undefined reference to `udp_table'
> filter.c:(.text+0x808c): undefined reference to `__udp4_lib_lookup'
> net/core/filter.o: In function `bpf_sk_release':
> filter.c:(.text+0x82e8): undefined reference to `sock_gen_put'
>
> The compiler can optimize it out and avoid those references for
> the most part, but we are missing a few steps here:
>
> - sk_lookup() should always have been marked 'static', this also
> avoids a warning about a missing prototype when building with
> 'make W=1'.
> - The BPF_CALL_x() macro needs a little change to allow marking
> the unneeded BPF call as 'static' and having the compiler
> drop them.
> - The reference to the bpf_func_proto must be made conditional.
>
> Fixes: 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
Thanks for the fix.
> include/linux/filter.h | 2 +-
> net/core/filter.c | 18 +++++++++++-------
> 2 files changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/include/linux/filter.h b/include/linux/filter.h
> index 6791a0ac0139..d9ec9d908bbe 100644
> --- a/include/linux/filter.h
> +++ b/include/linux/filter.h
> @@ -428,9 +428,9 @@ struct sock_reuseport;
> u64, __ur_3, u64, __ur_4, u64, __ur_5)
>
> #define BPF_CALL_x(x, name, ...) \
> + u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__)); \
> static __always_inline \
> u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)); \
> - u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__)); \
> u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__)) \
> { \
> return ____##name(__BPF_MAP(x,__BPF_CAST,__BPF_N,__VA_ARGS__));\
For what it's worth, other similar cases in net/core/filter.c avoid
this by just wrapping the relevant sections of the code in the #ifdef
as well.
Might be a bit simpler to follow that style (only checked with make
M=net/core W=1):
$ git di
diff --git a/net/core/filter.c b/net/core/filter.c
index 30c6b2d3ef16..4bbc6567fcb8 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -4817,8 +4817,9 @@ static const struct bpf_func_proto
bpf_lwt_seg6_adjust_srh_proto = {
};
#endif /* CONFIG_IPV6_SEG6_BPF */
-struct sock *sk_lookup(struct net *net, struct bpf_sock_tuple *tuple,
- struct sk_buff *skb, u8 family, u8 proto)
+#ifdef CONFIG_INET
+static struct sock *sk_lookup(struct net *net, struct bpf_sock_tuple *tuple,
+ struct sk_buff *skb, u8 family, u8 proto)
{
int dif = skb->dev->ifindex;
bool refcounted = false;
@@ -4951,6 +4952,7 @@ static const struct bpf_func_proto
bpf_sk_release_proto = {
.ret_type = RET_INTEGER,
.arg1_type = ARG_PTR_TO_SOCKET,
};
+#endif /* CONFIG_INET */
bool bpf_helper_changes_pkt_data(void *func)
{
@@ -5158,12 +5160,14 @@ tc_cls_act_func_proto(enum bpf_func_id
func_id, const struct bpf_prog *prog)
case BPF_FUNC_skb_ancestor_cgroup_id:
return &bpf_skb_ancestor_cgroup_id_proto;
#endif
+#ifdef CONFIG_INET
case BPF_FUNC_sk_lookup_tcp:
return &bpf_sk_lookup_tcp_proto;
case BPF_FUNC_sk_lookup_udp:
return &bpf_sk_lookup_udp_proto;
case BPF_FUNC_sk_release:
return &bpf_sk_release_proto;
+#endif
default:
return bpf_base_func_proto(func_id);
}
@@ -5264,12 +5268,14 @@ sk_skb_func_proto(enum bpf_func_id func_id,
const struct bpf_prog *prog)
return &bpf_sk_redirect_hash_proto;
case BPF_FUNC_get_local_storage:
return &bpf_get_local_storage_proto;
+#ifdef CONFIG_INET
case BPF_FUNC_sk_lookup_tcp:
return &bpf_sk_lookup_tcp_proto;
case BPF_FUNC_sk_lookup_udp:
return &bpf_sk_lookup_udp_proto;
case BPF_FUNC_sk_release:
return &bpf_sk_release_proto;
+#endif
default:
return bpf_base_func_proto(func_id);
}
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox