From: Jesse Barnes <jbarnes@engr.sgi.com>
To: James Bottomley <James.Bottomley@steeleye.com>
Cc: Grant Grundler <grundler@parisc-linux.org>,
Andrew Vasquez <andrew.vasquez@qlogic.com>,
pj@sgi.com, SCSI Mailing List <linux-scsi@vger.kernel.org>,
mdr@cthulhu.engr.sgi.com, jeremy@cthulhu.engr.sgi.com,
djh@cthulhu.engr.sgi.com, Andrew Morton <akpm@osdl.org>
Subject: Re: SCSI QLA not working on latest *-mm SN2
Date: Tue, 21 Sep 2004 11:58:24 -0400 [thread overview]
Message-ID: <200409211158.25122.jbarnes@engr.sgi.com> (raw)
In-Reply-To: <1095781309.2467.88.camel@mulgrave>
On Tuesday, September 21, 2004 11:41 am, James Bottomley wrote:
> Just to get back to the actual qla2xxx problem.
>
> Do we agree that there are two possible solutions:
>
> 1) Find a safe mmio read to trigger the flush of the posted reset write.
>
> 2) Use a pio write to trigger the reset because we know the reset is
> active as soon as the write returns.
>
> and if so, which one are we going to implement?
or
3) use a regular write() with an associated pioflush()
For now, (1) is a good option if the driver can do it (I still haven't heard
if qla2xxx supports this). I suspect that neither (1) nor (2) is available
to some device, leaving only udelay() or (3), which I'm working on.
Jesse
next prev parent reply other threads:[~2004-09-21 15:59 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <B179AE41C1147041AA1121F44614F0B060EF48@AVEXCH02.qlogic.org>
[not found] ` <20040916121235.5e4f9c32.pj@sgi.com>
[not found] ` <1095362263.16326.12.camel@praka>
2004-09-16 19:56 ` SCSI QLA not working on latest *-mm SN2 Paul Jackson
2004-09-16 20:05 ` Jesse Barnes
2004-09-16 20:56 ` Andrew Vasquez
2004-09-16 21:09 ` Jesse Barnes
2004-09-16 21:40 ` Andrew Vasquez
2004-09-16 22:25 ` Andrew Morton
2004-09-16 22:29 ` Jesse Barnes
2004-09-17 17:21 ` Jesse Barnes
2004-09-18 6:10 ` Grant Grundler
2004-09-18 17:57 ` Documentation/io_ordering.txt is wrong Matthew Wilcox
2004-09-20 23:39 ` Jesse Barnes
2004-09-21 0:38 ` Jesse Barnes
2004-09-20 22:40 ` SCSI QLA not working on latest *-mm SN2 Jesse Barnes
2004-09-20 23:27 ` Grant Grundler
2004-09-21 0:09 ` Jesse Barnes
2004-09-21 5:46 ` Grant Grundler
2004-09-21 6:45 ` Jeremy Higdon
2004-09-21 13:29 ` Jesse Barnes
2004-09-21 13:25 ` Jesse Barnes
2004-09-21 15:13 ` Jesse Barnes
2004-09-21 15:41 ` James Bottomley
2004-09-21 15:58 ` Jesse Barnes [this message]
2004-09-21 16:01 ` Matthew Wilcox
2004-09-21 16:05 ` Jesse Barnes
2004-09-21 16:11 ` James Bottomley
2004-09-21 16:18 ` Jesse Barnes
2004-09-21 16:24 ` James Bottomley
2004-09-21 17:03 ` Jesse Barnes
2004-09-21 17:15 ` Matthew Wilcox
2004-09-21 17:24 ` Jesse Barnes
2004-09-21 17:20 ` James Bottomley
2004-09-21 17:46 ` Jesse Barnes
2004-09-21 17:56 ` James Bottomley
2004-09-21 18:09 ` Jesse Barnes
2004-09-21 19:06 ` Grant Grundler
2004-09-21 19:40 ` Jesse Barnes
2004-09-21 22:44 ` Grant Grundler
2004-09-21 21:03 ` Jeremy Higdon
2004-09-21 21:11 ` Matthew Wilcox
2004-09-21 21:43 ` Jeremy Higdon
2004-09-21 22:33 ` Jesse Barnes
2004-09-22 0:02 ` Matthew Wilcox
2004-09-22 1:16 ` Jeremy Higdon
2004-09-22 1:44 ` Grant Grundler
2004-09-22 2:58 ` Jeremy Higdon
2004-09-22 14:32 ` I/O write ordering Matthew Wilcox
2004-09-22 14:40 ` Benjamin Herrenschmidt
2004-09-22 14:50 ` Jesse Barnes
2004-09-22 14:47 ` James Bottomley
2004-09-22 14:51 ` Benjamin Herrenschmidt
2004-09-22 15:11 ` James Bottomley
2004-09-22 15:11 ` Benjamin Herrenschmidt
2004-09-22 15:22 ` James Bottomley
2004-09-22 15:28 ` Benjamin Herrenschmidt
2004-09-22 15:43 ` James Bottomley
2004-09-23 0:19 ` Benjamin Herrenschmidt
2004-09-23 1:58 ` Matthew Wilcox
2004-09-23 3:01 ` James Bottomley
2004-09-23 3:40 ` Benjamin Herrenschmidt
2004-09-23 4:26 ` Grant Grundler
2004-09-21 23:03 ` SCSI QLA not working on latest *-mm SN2 Guennadi Liakhovetski
2004-09-16 23:14 ` Jeremy Higdon
2004-09-16 20:11 ` Andrew Morton
2004-09-21 21:22 Andrew Vasquez
2004-09-21 21:44 ` Jeremy Higdon
2004-09-21 22:37 ` Jesse Barnes
2004-09-21 22:49 ` Jeremy Higdon
-- strict thread matches above, loose matches on Subject: below --
2004-09-21 20:50 Andrew Vasquez
2004-09-21 21:06 ` Jeremy Higdon
2004-09-21 22:36 ` Jesse Barnes
2004-09-21 22:39 ` Jeremy Higdon
2004-09-21 22:43 ` Jesse Barnes
2004-09-21 22:54 ` Jeremy Higdon
2004-09-21 23:17 ` Jesse Barnes
2004-09-22 21:33 ` Jesse Barnes
2004-09-21 17:33 Andrew Vasquez
2004-09-21 17:52 ` Jesse Barnes
2004-09-21 18:04 ` Matthew Wilcox
2004-09-21 18:59 ` Matthew Wilcox
2004-09-21 19:10 ` Jesse Barnes
2004-09-21 15:58 Andrew Vasquez
2004-09-21 16:07 ` Jesse Barnes
2004-09-21 16:25 ` Matthew Wilcox
2004-09-21 16:33 ` James Bottomley
2004-09-21 20:39 ` Jeremy Higdon
2004-09-21 20:43 ` Jeremy Higdon
2004-09-17 22:55 Andrew Vasquez
2004-09-17 23:10 ` Jesse Barnes
2004-09-17 23:55 ` James Bottomley
2004-09-18 1:15 ` Andrew Vasquez
2004-09-18 1:25 ` Matthew Wilcox
2004-09-18 1:24 ` Andrew Vasquez
2004-09-18 2:36 ` Jeremy Higdon
2004-09-18 19:12 ` James Bottomley
2004-09-15 22:51 Paul Jackson
2004-09-15 23:13 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200409211158.25122.jbarnes@engr.sgi.com \
--to=jbarnes@engr.sgi.com \
--cc=James.Bottomley@steeleye.com \
--cc=akpm@osdl.org \
--cc=andrew.vasquez@qlogic.com \
--cc=djh@cthulhu.engr.sgi.com \
--cc=grundler@parisc-linux.org \
--cc=jeremy@cthulhu.engr.sgi.com \
--cc=linux-scsi@vger.kernel.org \
--cc=mdr@cthulhu.engr.sgi.com \
--cc=pj@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.