From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-arm/master
Date: Wed, 07 Dec 2011 11:16:43 +0100 [thread overview]
Message-ID: <20111207101643.650071EFEDC@gemini.denx.de> (raw)
In-Reply-To: <4EDEA289.9070805@aribaud.net>
Dear Albert ARIBAUD,
In message <4EDEA289.9070805@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit ea45cb0adcf4baa8f939fea4c848f3e1906f19d9:
>
> net: Make sure IPaddr_t is 32 bits in size (2011-12-06 22:15:32 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Ajay Bhargav (1):
> net: Armada100: Fix compilation warnings
>
> Anatolij Gustschin (4):
> ARM: davinci_dm6467Tevm: Fix build breakage
> arch/arm/cpu/armv7/omap-common/spl.c: Fix GCC 4.2 warnings
> arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix GCC 4.6 warnings
> arch/arm/include/asm/arch-omap5/clocks.h: Fix GCC 4.2 warnings
>
> Aneesh V (13):
> armv7: disable L2 cache in cleanup_before_linux()
> armv7: include armv7/cpu.c in SPL build
> armv7: setup vector
> start.S: remove omap3 specific code from start.S
> omap: Improve PLL parameter calculation tool
> omap4: ttyO2 instead of ttyS2 in default bootargs
> omap: fix cache line size for omap3/omap4 boards
> omap4460: fix TPS initialization
> omap: remove I2C from SPL
> omap4: emif: fix error in driver
> omap4460: add ES1.1 identification
> omap4+: streamline CONFIG_SYS_TEXT_BASE and other SDRAM addresses
> omap4: fix IO setting
>
> Christian Riesch (9):
> arm, arm926ejs: Fix clear bss loop for zero length bss
> arm, davinci: Move pinmux functions from board to arch tree
> arm, hawkboard: Remove obsolete struct pinmux_config i2c_pins
> arm, da850evm: Do pinmux configuration for EMAC together with
> other pinmuxes
> arm, da850: Add pinmux configurations to the arch tree
> arm, da850evm: Use the pinmux configurations defined in the arch tree
> arm, hawkboard: Use the pinmux configurations defined in the arch
> tree
> arm, davinci: Remove duplication of pinmux configuration code
> arm: printf() is not available in some SPL configurations
>
> Fabio Estevam (5):
> mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
> mx53ard: Configure the pins as GPIOs prior to using gpio_get_value
> mx53evk: Configure the pins as GPIOs prior to using gpio_get_value
> mx53smd: Configure the pins as GPIOs prior to using gpio_get_value
> mx51evk: Configure the pins as GPIOs prior to using gpio_get_value
>
> Heiko Schocher (6):
> arm, arm926ejs: always do cpu critical inits
> arm, davinci: move davinci_rtc struct to hardware.h
> arm, davinci, da850: add uart1 tx rx pinmux config
> arm, board/davinci/common/misc.c: Codingstyle cleanup
> arm, davinci: move misc function in arch tree
> arm, davinci: add support for am1808 based enbw_cmc board
>
> Ilya Yanok (10):
> davinci_emac: move arch-independent defines to separate header
> davinci_emac: use internal addresses in buffer descriptors
> davinci_emac: conditionally compile specific PHY support
> arm926ejs: add noop implementation for dcache ops
> davinci_emac: fix for running with dcache enabled
> davinci_emac: hardcode 100Mbps for AM35xx and RMII
> AM35xx: add EMAC support
> AM3517: move AM3517 specific mux defines to generic header
> nand_spl_simple: add support for software ECC
> omap_gpmc: use SOFTECC in SPL if it's enabled
>
> Koen Kooi (1):
> BeagleBoard: config: Really switch to ttyO2
>
> Manjunath Hadli (1):
> da850evm: pass board revision info to kernel
>
> Marek Vasut (25):
> PXA: Drop CERF250 board
> PXA: Drop CRADLE board
> PXA: Drop PLEB2 board
> PXA: Drop XM250 board
> PXA: Rework start.S to be closer to other ARMs
> PXA: Re-add the Dcache locking as RAM for pxa250
> PXA: Fixup PXA25x boards after start.S update
> PXA: Drop Voipac PXA270 OneNAND IPL
> PXA: Adapt Voipac PXA270 to OneNAND SPL
> PXA: Enable command line editing for vpac270
> PXA: Unify vpac270 environment size
> PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X
> PXA: Separate PXA2xx CPU init
> PXA: Add cpuinfo display for PXA2xx
> PXA: Replace timer driver
> PXA: Cleanup Colibri PXA270
> PXA: Export cpu_is_ and pxa_dram_init functions
> PXA: Squash extern pxa_dram_init()
> PXA: Rename pxa_dram_init to pxa2xx_dram_init
> PXA: Introduce common configuration header for PXA
> PXA: Flip colibri_pxa27x to pxa-common.h
> PXA: Move colibri_pxa270 to board/toradex/
> MC13892: Add REGMODE0 bits definitions
> Efika: Configure additional regulators for HDMI output
> MXS: Add static annotations to dma driver
>
> Prabhakar Lad (1):
> ARM: davici_emac: Fix condition for number of phy detects
>
> Robert Deli?n (1):
> M28: Fix OB1 bug in GPIO driver
>
> Sanjeev Premi (2):
> part_efi: Fix compile errors
> omap3evm: Add support for EFI partitions
>
> Simon Glass (1):
> mx5: Correct a warning in clock.c
>
> Simon Guinot (4):
> netspace_v2: Read Ethernet MAC address from EEPROM
> mvsata: fix ide_preinit for missing disks
> ARM: add support for LaCie 2Big Network v2
> ARM: remove duplicated code for LaCie boards
>
> Simon Schwarz (3):
> nand: Add common functions to linux/mtd/nand.h
> Fix regression in SMDK6400
> devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss
>
> Stefano Babic (2):
> MX: serial_mxc: cleanup removing nasty #ifdef
> MX35: flea3: changes due to hardware revision B
>
> Sughosh Ganu (1):
> davinci: Remove unwanted memsize.c from hawkboard's nand spl build
>
> Thomas Weber (3):
> ARM: OMAP3: Remove unused define CONFIG_OMAP3430
> ARM: OMAP3: Remove unused define SDRC_R_C_B
> ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused
>
> Tim Schendekehl (1):
> Ethernut 5 board support
>
> Tom Rini (15):
> omap3: mem: Comment enable_gpmc_cs_config more
> OMAP3: Update SDRC dram_init to always call make_cs1_contiguous()
> OMAP3: Add a helper function to set timings in SDRC
> OMAP3: Change mem_ok to clear again after reading back
> OMAP3: Remove get_mem_type prototype
> omap3: mem: Add MCFG helper macro
> OMAP3: Add optimal SDRC autorefresh control values
> OMAP3: Suffix all Micron memory timing parts with their speed
> OMAP3 SPL: Rework memory initalization and devkit8000 support
> OMAP3 SPL: Add identify_nand_chip function
> OMAP3: Add SPL support to Beagleboard
> OMAP3: Add SPL support to omap3_evm
> AM3517: Add SPL support
> AM3517 CraneBoard: Add SPL support
> OMAP3: Add SPL_BOARD_INIT hook
>
> Wolfram Sang (1):
> apbh_dma: return error value on timeout
>
> MAINTAINERS | 11 +-
> arch/arm/cpu/arm1136/mx31/devices.c | 4 -
> arch/arm/cpu/arm926ejs/Makefile | 2 +-
> arch/arm/cpu/arm926ejs/cache.c | 75 ++
> arch/arm/cpu/arm926ejs/davinci/Makefile | 3 +-
> arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 36 +-
> arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 171 ++++
> arch/arm/cpu/arm926ejs/davinci/dp83848.c | 1 +
> arch/arm/cpu/arm926ejs/davinci/et1011c.c | 1 +
> arch/arm/cpu/arm926ejs/davinci/ksz8873.c | 1 +
> arch/arm/cpu/arm926ejs/davinci/lxt972.c | 1 +
> .../arm/cpu/arm926ejs/davinci}/misc.c | 19 +-
> .../arm/cpu/arm926ejs/davinci/pinmux.c | 0
> arch/arm/cpu/arm926ejs/start.S | 14 +-
> arch/arm/cpu/armv7/Makefile | 4 +-
> arch/arm/cpu/armv7/cpu.c | 1 +
> arch/arm/cpu/armv7/mx5/clock.c | 2 +-
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 16 +-
> arch/arm/cpu/armv7/omap-common/emif-common.c | 4 +-
> arch/arm/cpu/armv7/omap-common/spl.c | 10 +-
> arch/arm/cpu/armv7/omap3/Makefile | 4 +
> arch/arm/cpu/armv7/omap3/board.c | 5 +
> .../vpac270.c => arch/arm/cpu/armv7/omap3/emac.c | 34 +-
> arch/arm/cpu/armv7/omap3/lowlevel_init.S | 8 +
> arch/arm/cpu/armv7/omap3/mem.c | 13 +-
> arch/arm/cpu/armv7/omap3/sdrc.c | 145 ++--
> arch/arm/cpu/armv7/omap3/spl_id_nand.c | 87 +++
> arch/arm/cpu/armv7/omap4/hwinit.c | 17 +-
> arch/arm/cpu/armv7/start.S | 38 +-
> arch/arm/cpu/pxa/Makefile | 7 +-
> arch/arm/cpu/pxa/cpuinfo.c | 132 ++++
> arch/arm/cpu/pxa/{cpu.c => pxa2xx.c} | 119 ++--
> arch/arm/cpu/pxa/start.S | 456 ++++++------
> arch/arm/cpu/pxa/timer.c | 91 +--
> arch/arm/cpu/pxa/u-boot.lds | 6 +
> arch/arm/cpu/pxa/usb.c | 12 +-
> arch/arm/include/asm/arch-davinci/emac_defs.h | 289 -------
> arch/arm/include/asm/arch-davinci/hardware.h | 41 +
> arch/arm/include/asm/arch-davinci/pinmux_defs.h | 51 ++
> arch/arm/include/asm/arch-mx25/imx-regs.h | 10 +-
> arch/arm/include/asm/arch-mx27/imx-regs.h | 8 +-
> arch/arm/include/asm/arch-mx28/dma.h | 25 -
> arch/arm/include/asm/arch-mx31/imx-regs.h | 6 +
> arch/arm/include/asm/arch-mx35/imx-regs.h | 6 +-
> arch/arm/include/asm/arch-mx5/imx-regs.h | 6 +-
> arch/arm/include/asm/arch-omap3/am35x_def.h | 3 +
> arch/arm/include/asm/arch-omap3/emac_defs.h | 56 ++
> arch/arm/include/asm/arch-omap3/mem.h | 156 +++--
> arch/arm/include/asm/arch-omap3/mux.h | 41 +
> arch/arm/include/asm/arch-omap3/omap3.h | 1 +
> arch/arm/include/asm/arch-omap3/sys_proto.h | 4 +-
> arch/arm/include/asm/arch-omap4/omap.h | 2 +
> arch/arm/include/asm/arch-omap5/clocks.h | 16 +-
> arch/arm/include/asm/arch-pxa/pxa-regs.h | 48 +-
> .../arm/include/asm/arch-pxa/pxa.h | 40 +-
> arch/arm/include/asm/omap_common.h | 5 +
> arch/arm/lib/eabi_compat.c | 2 +
> board/CarMediaLab/flea3/flea3.c | 4 +-
> board/LaCie/common/common.c | 87 +++
> board/LaCie/common/common.h | 20 +
> board/LaCie/edminiv2/Makefile | 5 +-
> board/LaCie/edminiv2/edminiv2.c | 30 +-
> board/{cradle => LaCie/net2big_v2}/Makefile | 33 +-
> board/LaCie/net2big_v2/kwbimage.cfg | 162 ++++
> board/LaCie/net2big_v2/net2big_v2.c | 126 +++
> .../edminiv2.h => net2big_v2/net2big_v2.h} | 32 +-
> board/LaCie/netspace_v2/Makefile | 5 +-
> board/LaCie/netspace_v2/netspace_v2.c | 51 +-
> board/LaCie/netspace_v2/netspace_v2.h | 8 -
> board/ait/cam_enc_4xx/cam_enc_4xx.c | 15 -
> board/balloon3/balloon3.c | 4 +-
> board/cerf250/Makefile | 43 -
> board/cerf250/cerf250.c | 85 --
> board/cerf250/flash.c | 429 -----------
> board/cradle/cradle.c | 236 ------
> board/cradle/flash.c | 361 ---------
> board/davinci/da8xxevm/da830evm.c | 2 -
> board/davinci/da8xxevm/da850evm.c | 165 +----
> board/davinci/da8xxevm/hawkboard_nand_spl.c | 59 +--
> board/davinci/ea20/ea20.c | 2 -
> board/efikamx/efikamx.c | 15 +-
> board/{pleb2 => egnite/ethernut5}/Makefile | 20 +-
> board/egnite/ethernut5/ethernut5.c | 270 +++++++
> board/egnite/ethernut5/ethernut5_pwrman.c | 338 ++++++++
> board/egnite/ethernut5/ethernut5_pwrman.h | 68 ++
> board/{davinci/common => enbw/enbw_cmc}/Makefile | 12 +-
> board/enbw/enbw_cmc/enbw_cmc.c | 607 +++++++++++++++
> board/freescale/mx51evk/mx51evk.c | 3 +
> board/freescale/mx53ard/mx53ard.c | 3 +
> board/freescale/mx53evk/mx53evk.c | 3 +
> board/freescale/mx53loco/mx53loco.c | 3 +
> board/freescale/mx53smd/mx53smd.c | 1 +
> board/logicpd/am3517evm/am3517evm.c | 2 +-
> board/logicpd/am3517evm/am3517evm.h | 40 -
> board/logicpd/am3517evm/config.mk | 30 -
> board/lubbock/lubbock.c | 4 +-
> board/palmld/palmld.c | 4 +-
> board/palmtc/palmtc.c | 4 +-
> board/pleb2/flash.c | 814
> --------------------
> board/pleb2/pleb2.c | 71 --
> board/pxa255_idp/pxa_idp.c | 4 +-
> board/ti/am3517crane/am3517crane.c | 2 +-
> board/ti/am3517crane/am3517crane.h | 39 -
> board/ti/am3517crane/config.mk | 29 -
> board/ti/beagle/beagle.c | 71 ++-
> board/ti/beagle/config.mk | 33 -
> board/ti/evm/config.mk | 33 -
> board/ti/evm/evm.c | 41 +-
> board/ti/panda/panda_mux_data.h | 2 +-
> board/ti/sdp4430/sdp.c | 7 +
> board/ti/sdp4430/sdp4430_mux_data.h | 6 +-
> board/timll/devkit8000/devkit8000.c | 21 +
> board/{ => toradex}/colibri_pxa270/Makefile | 0
> .../{ => toradex}/colibri_pxa270/colibri_pxa270.c | 36 +-
> board/trizepsiv/conxs.c | 4 +-
> board/vpac270/Makefile | 4 +
> board/vpac270/onenand.c | 65 ++
> board/vpac270/u-boot-spl.lds | 92 +++
> board/vpac270/vpac270.c | 6 +-
> board/xaeniax/xaeniax.c | 4 +-
> board/xm250/Makefile | 43 -
> board/xm250/flash.c | 535 -------------
> board/xm250/xm250.c | 95 ---
> board/zipitz2/zipitz2.c | 4 +-
> boards.cfg | 15 +-
> common/lcd.c | 14 +-
> disk/part_efi.c | 2 +-
> doc/README.scrapyard | 4 +
> drivers/block/mvsata_ide.c | 14 +-
> drivers/dma/apbh_dma.c | 211 ++----
> drivers/gpio/mxs_gpio.c | 2 +-
> drivers/mmc/pxa_mmc.c | 7 +-
> drivers/mmc/pxa_mmc_gen.c | 4 +-
> drivers/mtd/nand/nand_base.c | 6 +-
> drivers/mtd/nand/nand_ecc.c | 2 +-
> drivers/mtd/nand/nand_spl_simple.c | 11 +-
> drivers/mtd/nand/omap_gpmc.c | 4 +-
> drivers/mtd/nand/s3c64xx.c | 28 +-
> drivers/net/armada100_fec.c | 14 +-
> drivers/net/davinci_emac.c | 94 ++-
> drivers/net/davinci_emac.h | 315 ++++++++
> drivers/net/lan91c96.h | 4 +-
> drivers/net/smc91111.h | 6 +-
> drivers/rtc/davinci.c | 26 -
> drivers/serial/serial_mxc.c | 37 +-
> drivers/serial/serial_pxa.c | 4 +-
> drivers/serial/usbtty.h | 2 +-
> drivers/usb/gadget/Makefile | 2 +-
> include/configs/am3517_crane.h | 64 ++-
> include/configs/am3517_evm.h | 64 ++-
> include/configs/apollon.h | 4 -
> include/configs/balloon3.h | 2 +-
> include/configs/cerf250.h | 229 ------
> include/configs/cm_t35.h | 8 -
> include/configs/colibri_pxa270.h | 103 +--
> include/configs/cradle.h | 358 ---------
> include/configs/da850_am18xxevm.h | 3 +-
> include/configs/da850evm.h | 1 +
> include/configs/davinci_dm6467Tevm.h | 1 +
> include/configs/devkit8000.h | 24 +-
> include/configs/dig297.h | 4 -
> include/configs/efikamx.h | 2 +-
> include/configs/enbw_cmc.h | 451 +++++++++++
> include/configs/ethernut5.h | 287 +++++++
> include/configs/flea3.h | 22 +-
> include/configs/hawkboard.h | 1 +
> include/configs/igep0020.h | 4 -
> include/configs/igep0030.h | 4 -
> include/configs/imx27lite-common.h | 2 +-
> include/configs/imx31_litekit.h | 4 +-
> include/configs/imx31_phycore.h | 2 +-
> include/configs/{netspace_v2.h => lacie_kw.h} | 29 +-
> include/configs/lubbock.h | 4 +-
> include/configs/mx25pdk.h | 2 +-
> include/configs/mx31ads.h | 4 +-
> include/configs/mx31pdk.h | 2 +-
> include/configs/mx35pdk.h | 2 +-
> include/configs/mx51evk.h | 2 +-
> include/configs/mx53ard.h | 2 +-
> include/configs/mx53evk.h | 2 +-
> include/configs/mx53loco.h | 2 +-
> include/configs/mx53smd.h | 2 +-
> include/configs/omap3_beagle.h | 71 ++-
> include/configs/omap3_evm.h | 34 +
> include/configs/omap3_evm_common.h | 41 +-
> include/configs/omap3_evm_quick_mmc.h | 10 +
> include/configs/omap3_evm_quick_nand.h | 22 +
> include/configs/omap3_mvblx.h | 10 +-
> include/configs/omap3_overo.h | 10 +-
> include/configs/omap3_pandora.h | 10 +-
> include/configs/omap3_sdp3430.h | 10 +-
> include/configs/omap3_zoom1.h | 10 +-
> include/configs/omap3_zoom2.h | 10 +-
> include/configs/omap4_common.h | 20 +-
> include/configs/omap5_evm.h | 19 +-
> include/configs/palmld.h | 2 +-
> include/configs/palmtc.h | 4 +-
> include/configs/pleb2.h | 266 -------
> include/configs/pxa-common.h | 60 ++
> include/configs/pxa255_idp.h | 4 +-
> include/configs/qong.h | 4 +-
> include/configs/trizepsiv.h | 2 +-
> include/configs/tt01.h | 2 +-
> include/configs/tx25.h | 2 +-
> include/configs/vision2.h | 2 +-
> include/configs/vpac270.h | 43 +-
> include/configs/xaeniax.h | 4 +-
> include/configs/xm250.h | 369 ---------
> include/configs/zipitz2.h | 2 +-
> include/configs/zmx25.h | 2 +-
> include/lcd.h | 5 +-
> include/linux/mtd/nand.h | 7 +
> include/mc13892.h | 16 +
> include/nand.h | 3 -
> nand_spl/board/davinci/da8xxevm/Makefile | 26 +-
> nand_spl/board/samsung/smdk6400/Makefile | 9 +-
> onenand_ipl/board/vpac270/Makefile | 79 --
> onenand_ipl/board/vpac270/config.mk | 1 -
> tools/omap/clocks_get_m_n.c | 187 +++---
> 219 files changed, 5433 insertions(+), 6288 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/cache.c
> create mode 100644 arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c
> rename {board/davinci/common => arch/arm/cpu/arm926ejs/davinci}/misc.c
> (90%)
> rename board/davinci/common/davinci_pinmux.c =>
> arch/arm/cpu/arm926ejs/davinci/pinmux.c (100%)
> rename onenand_ipl/board/vpac270/vpac270.c =>
> arch/arm/cpu/armv7/omap3/emac.c (58%)
> create mode 100644 arch/arm/cpu/armv7/omap3/spl_id_nand.c
> create mode 100644 arch/arm/cpu/pxa/cpuinfo.c
> rename arch/arm/cpu/pxa/{cpu.c => pxa2xx.c} (76%)
> create mode 100644 arch/arm/include/asm/arch-davinci/pinmux_defs.h
> create mode 100644 arch/arm/include/asm/arch-omap3/emac_defs.h
> rename onenand_ipl/board/vpac270/u-boot.onenand.lds =>
> arch/arm/include/asm/arch-pxa/pxa.h (50%)
> create mode 100644 board/LaCie/common/common.c
> create mode 100644 board/LaCie/common/common.h
> rename board/{cradle => LaCie/net2big_v2}/Makefile (57%)
> create mode 100644 board/LaCie/net2big_v2/kwbimage.cfg
> create mode 100644 board/LaCie/net2big_v2/net2big_v2.c
> rename board/LaCie/{edminiv2/edminiv2.h => net2big_v2/net2big_v2.h} (50%)
> delete mode 100644 board/cerf250/Makefile
> delete mode 100644 board/cerf250/cerf250.c
> delete mode 100644 board/cerf250/flash.c
> delete mode 100644 board/cradle/cradle.c
> delete mode 100644 board/cradle/flash.c
> rename board/{pleb2 => egnite/ethernut5}/Makefile (73%)
> create mode 100644 board/egnite/ethernut5/ethernut5.c
> create mode 100644 board/egnite/ethernut5/ethernut5_pwrman.c
> create mode 100644 board/egnite/ethernut5/ethernut5_pwrman.h
> rename board/{davinci/common => enbw/enbw_cmc}/Makefile (88%)
> create mode 100644 board/enbw/enbw_cmc/enbw_cmc.c
> delete mode 100644 board/logicpd/am3517evm/config.mk
> delete mode 100644 board/pleb2/flash.c
> delete mode 100644 board/pleb2/pleb2.c
> delete mode 100644 board/ti/am3517crane/config.mk
> delete mode 100644 board/ti/beagle/config.mk
> delete mode 100644 board/ti/evm/config.mk
> rename board/{ => toradex}/colibri_pxa270/Makefile (100%)
> rename board/{ => toradex}/colibri_pxa270/colibri_pxa270.c (81%)
> create mode 100644 board/vpac270/onenand.c
> create mode 100644 board/vpac270/u-boot-spl.lds
> delete mode 100644 board/xm250/Makefile
> delete mode 100644 board/xm250/flash.c
> delete mode 100644 board/xm250/xm250.c
> create mode 100644 drivers/net/davinci_emac.h
> delete mode 100644 include/configs/cerf250.h
> delete mode 100644 include/configs/cradle.h
> create mode 100644 include/configs/enbw_cmc.h
> create mode 100644 include/configs/ethernut5.h
> rename include/configs/{netspace_v2.h => lacie_kw.h} (88%)
> delete mode 100644 include/configs/pleb2.h
> create mode 100644 include/configs/pxa-common.h
> delete mode 100644 include/configs/xm250.h
> delete mode 100644 onenand_ipl/board/vpac270/Makefile
> delete mode 100644 onenand_ipl/board/vpac270/config.mk
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I will also, for an appropriate fee, certify that your keyboard is
object-oriented, and that the bits on your hard disk are template-
compatible. - Jeffrey S. Haemer in <411akr$3ga@cygnus.com>
next prev parent reply other threads:[~2011-12-07 10:16 UTC|newest]
Thread overview: 259+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-06 23:17 [U-Boot] Pull request: u-boot-arm/master Albert ARIBAUD
2011-12-07 10:16 ` Wolfgang Denk [this message]
-- strict thread matches above, loose matches on Subject: below --
2016-01-31 20:40 Albert ARIBAUD
2016-02-01 16:54 ` Tom Rini
2015-11-10 17:45 Albert ARIBAUD
2015-11-10 20:15 ` Tom Rini
2015-10-15 21:19 Albert ARIBAUD
2015-10-15 22:00 ` Tom Rini
2015-07-31 1:06 Albert ARIBAUD
2015-08-01 14:47 ` Tom Rini
2015-07-06 15:20 Albert ARIBAUD
2015-07-06 21:15 ` Tom Rini
2015-07-06 22:09 ` Albert ARIBAUD
2015-07-06 23:59 ` Tom Rini
2015-07-07 5:49 ` Albert ARIBAUD
2015-07-07 10:01 ` Albert ARIBAUD
2015-07-02 21:27 Albert ARIBAUD
2015-07-02 22:55 ` Tom Rini
2015-07-05 14:11 ` Albert ARIBAUD
2015-05-05 9:30 Albert ARIBAUD
2015-05-05 23:59 ` Tom Rini
2015-01-04 18:11 Albert ARIBAUD
2015-01-05 15:10 ` Tom Rini
2014-11-24 17:30 Albert ARIBAUD
2014-11-24 22:13 ` Tom Rini
2014-11-13 7:54 Albert ARIBAUD
2014-11-08 0:07 Albert ARIBAUD
2014-11-10 21:28 ` Tom Rini
2014-10-11 0:38 Albert ARIBAUD
2014-10-11 11:49 ` Tom Rini
2014-10-07 11:16 Albert ARIBAUD
2014-10-07 16:02 ` Tom Rini
2014-09-17 21:40 Albert ARIBAUD
2014-09-18 1:00 ` Tom Rini
2014-09-12 13:42 Albert ARIBAUD
2014-09-12 19:15 ` Tom Rini
2014-07-29 13:08 Albert ARIBAUD
2014-07-29 14:30 ` Tom Rini
2014-07-05 8:18 Albert ARIBAUD
2014-07-05 16:48 ` Tom Rini
2014-07-04 22:57 Albert ARIBAUD
2014-07-05 0:20 ` Tom Rini
2014-07-02 20:33 Albert ARIBAUD
2014-07-02 22:38 ` Tom Rini
2014-06-08 7:51 Albert ARIBAUD
2014-06-09 2:25 ` Tom Rini
2014-05-30 15:20 Albert ARIBAUD
2014-05-30 17:59 ` Tom Rini
2014-05-24 9:32 Albert ARIBAUD
2014-05-24 20:37 ` Tom Rini
2014-05-20 8:57 Albert ARIBAUD
2014-05-22 19:12 ` Tom Rini
2014-05-09 9:56 Albert ARIBAUD
2014-05-09 16:15 ` Tom Rini
2014-04-08 11:40 Albert ARIBAUD
2014-04-08 16:39 ` Tom Rini
2014-03-10 18:16 Albert ARIBAUD
2014-03-10 21:27 ` Tom Rini
2014-02-26 21:40 Albert ARIBAUD
2014-02-26 23:39 ` Tom Rini
2014-02-13 17:43 Albert ARIBAUD
2014-02-18 17:50 ` Tom Rini
2014-02-18 18:21 ` Stephen Warren
2014-02-18 18:29 ` Tom Rini
2014-02-18 18:47 ` Albert ARIBAUD
2014-01-15 15:16 Albert ARIBAUD
2014-01-14 13:04 Albert ARIBAUD
2014-01-14 21:02 ` Tom Rini
2014-01-13 18:49 Albert ARIBAUD
2014-01-13 19:42 ` Tom Rini
2014-01-10 15:43 Albert ARIBAUD
2014-01-10 20:03 ` Tom Rini
2014-01-11 8:11 ` Albert ARIBAUD
2013-12-10 22:05 Albert ARIBAUD
2013-12-11 16:44 ` Tom Rini
2013-11-09 22:53 Albert ARIBAUD
2013-11-11 19:13 ` Tom Rini
2013-10-11 14:33 Albert ARIBAUD
2013-10-14 15:20 ` Tom Rini
2013-10-07 20:02 Albert ARIBAUD
2013-10-08 19:33 ` Tom Rini
2013-10-03 20:42 Albert ARIBAUD
2013-10-04 18:46 ` Tom Rini
2013-10-02 15:34 Albert ARIBAUD
2013-10-02 18:20 ` Tom Rini
2013-09-12 13:18 Albert ARIBAUD
2013-09-12 15:11 ` Tom Rini
2013-09-12 20:54 ` Albert ARIBAUD
2013-09-06 22:55 Albert ARIBAUD
2013-09-09 14:56 ` Tom Rini
2013-07-10 20:33 [U-Boot] pull " Albert ARIBAUD
2013-06-21 21:52 [U-Boot] Pull " Albert ARIBAUD
2013-06-24 20:17 ` Tom Rini
2013-06-13 15:49 Albert ARIBAUD
2013-06-14 15:11 ` Tom Rini
2013-06-05 15:02 [U-Boot] pull " Albert ARIBAUD
2013-06-07 18:20 ` Tom Rini
2013-05-30 19:29 [U-Boot] Pull " Albert ARIBAUD
2013-05-31 20:51 ` Tom Rini
2013-04-17 16:37 Albert ARIBAUD
2013-04-18 20:17 ` Tom Rini
2013-04-15 19:36 Albert ARIBAUD
2013-04-16 15:58 ` Tom Rini
2013-04-14 19:32 Albert ARIBAUD
2013-04-15 15:51 ` Tom Rini
2013-04-10 23:12 Albert ARIBAUD
2013-04-10 23:20 ` Benoît Thébaudeau
2013-04-11 6:10 ` Albert ARIBAUD
2013-03-28 20:06 Albert ARIBAUD
2013-03-29 0:01 ` Tom Rini
2013-03-15 22:01 Albert ARIBAUD
2013-03-16 8:19 ` Albert ARIBAUD
2013-03-17 19:40 ` Tom Rini
2013-03-18 17:06 ` Tom Rini
2013-03-18 17:43 ` Albert ARIBAUD
2013-03-18 18:38 ` Tom Rini
2013-02-12 14:25 Albert ARIBAUD
2013-02-15 16:33 ` Tom Rini
2013-01-14 16:58 Albert ARIBAUD
2013-01-14 23:18 ` Tom Rini
2013-01-11 21:36 Albert ARIBAUD
2013-01-11 23:44 ` Tom Rini
2013-01-09 14:43 Albert ARIBAUD
2013-01-09 19:35 ` Tom Rini
2013-01-08 15:07 Albert ARIBAUD
2013-01-08 20:50 ` Simon Glass
2013-01-08 21:01 ` Albert ARIBAUD
2013-01-08 21:06 ` Simon Glass
2013-01-08 22:34 ` Tom Rini
2012-12-22 12:11 Albert ARIBAUD
2012-12-22 15:20 ` Tom Rini
2013-01-03 6:41 ` Joonyoung Shim
2013-01-03 7:12 ` Lukasz Majewski
2012-11-04 21:51 Albert ARIBAUD
2012-11-05 16:54 ` Tom Rini
2012-11-05 19:45 ` Stephen Warren
2012-11-08 15:08 ` Tom Rini
2012-10-26 22:30 Albert ARIBAUD
2012-10-27 0:20 ` Tom Rini
2012-10-19 23:55 Albert ARIBAUD
2012-10-20 17:39 ` Tom Rini
2012-10-05 19:26 Albert ARIBAUD
2012-10-05 22:26 ` Tom Rini
2012-10-04 16:57 Albert ARIBAUD
2012-10-04 18:31 ` Tom Rini
2012-09-21 21:35 Albert ARIBAUD
2012-09-22 0:21 ` Tom Rini
2012-09-01 16:37 Albert ARIBAUD
2012-09-01 22:27 ` Wolfgang Denk
2012-07-10 6:30 Albert ARIBAUD
2012-07-10 7:04 ` Wolfgang Denk
2012-07-07 12:12 Albert ARIBAUD
2012-07-08 20:13 ` Wolfgang Denk
2012-05-15 6:57 Albert ARIBAUD
2012-05-20 20:33 ` Wolfgang Denk
2012-04-16 14:52 Albert ARIBAUD
2012-04-16 18:18 ` Marek Vasut
2012-04-16 20:09 ` Albert ARIBAUD
2012-04-16 20:15 ` Albert ARIBAUD
2012-04-17 5:33 ` Stefano Babic
2012-03-30 7:10 Albert ARIBAUD
2012-03-30 17:58 ` Wolfgang Denk
2012-02-27 20:23 Albert ARIBAUD
2012-03-03 14:09 ` Wolfgang Denk
2012-02-12 9:16 Albert ARIBAUD
2012-02-12 21:06 ` Wolfgang Denk
2012-01-16 8:16 Albert ARIBAUD
2012-01-17 21:36 ` Wolfgang Denk
2011-12-24 9:27 Albert ARIBAUD
2012-01-05 15:53 ` Wolfgang Denk
2011-12-19 16:55 Albert ARIBAUD
2011-12-20 21:40 ` Wolfgang Denk
2011-12-11 13:38 Albert ARIBAUD
2011-12-12 6:58 ` Wolfgang Denk
2011-12-09 16:42 Albert ARIBAUD
2011-12-10 21:54 ` Wolfgang Denk
2011-11-15 21:28 Albert ARIBAUD
2011-11-16 0:04 ` Simon Glass
2011-11-16 2:27 ` Marek Vasut
2011-11-16 3:45 ` Simon Glass
2011-11-16 3:53 ` Mike Frysinger
2011-11-16 4:05 ` Simon Glass
2011-11-16 19:24 ` Wolfgang Denk
2011-11-17 13:45 ` Albert ARIBAUD
2011-11-17 21:39 ` Mike Frysinger
2011-11-17 21:56 ` Wolfgang Denk
2011-11-17 22:03 ` Albert ARIBAUD
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF1740D74CB5@HQMAIL01.nvidia.com>
[not found] ` <7E91C59574E9954FA075F8D8CCDF78DB38FE7FF7A9@HQMAIL04.nvidia.com>
2011-11-17 22:04 ` Simon Glass
2011-11-16 6:28 ` Heiko Schocher
2011-11-16 19:42 ` Wolfgang Denk
2011-11-07 20:58 Albert ARIBAUD
2011-11-08 0:02 ` Wolfgang Denk
2011-09-30 20:09 Albert ARIBAUD
2011-10-01 19:40 ` Wolfgang Denk
2011-10-04 5:35 ` Simon Glass
2011-10-21 18:44 ` Albert ARIBAUD
2011-10-21 19:12 ` Simon Glass
2011-09-28 6:38 Albert ARIBAUD
2011-09-28 18:42 ` Wolfgang Denk
2011-09-22 21:03 Albert ARIBAUD
2011-09-23 6:29 ` Wolfgang Denk
2011-09-14 6:57 Albert ARIBAUD
2011-09-15 12:24 ` Wolfgang Denk
2011-08-31 10:13 Albert ARIBAUD
2011-08-31 11:57 ` Marek Vasut
2011-09-01 8:59 ` Aneesh V
2011-09-03 19:26 ` Albert ARIBAUD
2011-09-04 8:44 ` Aneesh V
2011-09-04 9:01 ` Albert ARIBAUD
2011-09-04 9:02 ` Aneesh V
2011-09-04 9:12 ` Albert ARIBAUD
2011-09-04 9:17 ` Aneesh V
2011-08-04 12:28 Albert ARIBAUD
2011-07-18 13:38 Albert ARIBAUD
2011-07-18 14:31 ` Igor Grinberg
2011-07-18 17:52 ` Albert ARIBAUD
2011-08-12 8:21 ` Albert ARIBAUD
2011-07-18 19:17 ` Wolfgang Denk
2011-07-04 9:08 Albert ARIBAUD
2011-07-04 22:32 ` Wolfgang Denk
2011-06-30 6:24 Albert ARIBAUD
2011-06-30 11:15 ` Albert ARIBAUD
2011-06-28 5:39 Albert ARIBAUD
2011-06-28 9:52 ` Igor Grinberg
2011-06-28 10:20 ` Igor Grinberg
2011-06-28 21:19 ` Albert ARIBAUD
2011-06-28 10:48 ` Wolfgang Denk
2011-06-29 6:09 ` Albert ARIBAUD
2011-06-29 21:09 ` Wolfgang Denk
2011-06-21 20:28 Albert ARIBAUD
2011-06-22 9:17 ` Wolfgang Denk
2011-06-22 12:18 ` Wolfgang Denk
2011-06-22 13:51 ` Albert ARIBAUD
2011-06-08 20:41 Albert ARIBAUD
2011-06-08 21:32 ` Wolfgang Denk
2011-05-31 20:31 Albert ARIBAUD
2011-05-31 22:29 ` John Rigby
2011-06-01 17:15 ` Albert ARIBAUD
2011-06-01 20:15 ` Wolfgang Denk
2011-05-11 21:07 Albert ARIBAUD
2011-05-11 22:11 ` Rogan Dawes
2011-05-12 5:41 ` Albert ARIBAUD
2011-05-12 8:48 ` Prafulla Wadaskar
2011-05-12 9:06 ` Simon Guinot
2011-05-12 9:12 ` Simon Guinot
2011-05-12 17:27 ` Wolfgang Denk
2011-05-14 18:38 ` Dirk Behme
2011-04-28 16:14 Albert ARIBAUD
2011-04-28 21:17 ` Wolfgang Denk
2011-04-27 17:40 Albert ARIBAUD
2011-04-27 20:16 ` Wolfgang Denk
2011-04-27 23:42 ` Macpaul Lin
2011-04-28 21:14 ` Wolfgang Denk
2011-04-29 1:31 ` Macpaul Lin
2011-04-30 20:44 ` Wolfgang Denk
2011-05-02 8:46 ` Macpaul Lin
2011-05-02 10:31 ` Wolfgang Denk
2011-03-27 17:25 Albert ARIBAUD
2011-03-27 19:32 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111207101643.650071EFEDC@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.