From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-arm/master
Date: Wed, 07 Dec 2011 00:17:29 +0100 [thread overview]
Message-ID: <4EDEA289.9070805@aribaud.net> (raw)
Hi Wolfgang,
The following changes since commit ea45cb0adcf4baa8f939fea4c848f3e1906f19d9:
net: Make sure IPaddr_t is 32 bits in size (2011-12-06 22:15:32 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Ajay Bhargav (1):
net: Armada100: Fix compilation warnings
Anatolij Gustschin (4):
ARM: davinci_dm6467Tevm: Fix build breakage
arch/arm/cpu/armv7/omap-common/spl.c: Fix GCC 4.2 warnings
arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix GCC 4.6 warnings
arch/arm/include/asm/arch-omap5/clocks.h: Fix GCC 4.2 warnings
Aneesh V (13):
armv7: disable L2 cache in cleanup_before_linux()
armv7: include armv7/cpu.c in SPL build
armv7: setup vector
start.S: remove omap3 specific code from start.S
omap: Improve PLL parameter calculation tool
omap4: ttyO2 instead of ttyS2 in default bootargs
omap: fix cache line size for omap3/omap4 boards
omap4460: fix TPS initialization
omap: remove I2C from SPL
omap4: emif: fix error in driver
omap4460: add ES1.1 identification
omap4+: streamline CONFIG_SYS_TEXT_BASE and other SDRAM addresses
omap4: fix IO setting
Christian Riesch (9):
arm, arm926ejs: Fix clear bss loop for zero length bss
arm, davinci: Move pinmux functions from board to arch tree
arm, hawkboard: Remove obsolete struct pinmux_config i2c_pins
arm, da850evm: Do pinmux configuration for EMAC together with
other pinmuxes
arm, da850: Add pinmux configurations to the arch tree
arm, da850evm: Use the pinmux configurations defined in the arch tree
arm, hawkboard: Use the pinmux configurations defined in the arch
tree
arm, davinci: Remove duplication of pinmux configuration code
arm: printf() is not available in some SPL configurations
Fabio Estevam (5):
mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
mx53ard: Configure the pins as GPIOs prior to using gpio_get_value
mx53evk: Configure the pins as GPIOs prior to using gpio_get_value
mx53smd: Configure the pins as GPIOs prior to using gpio_get_value
mx51evk: Configure the pins as GPIOs prior to using gpio_get_value
Heiko Schocher (6):
arm, arm926ejs: always do cpu critical inits
arm, davinci: move davinci_rtc struct to hardware.h
arm, davinci, da850: add uart1 tx rx pinmux config
arm, board/davinci/common/misc.c: Codingstyle cleanup
arm, davinci: move misc function in arch tree
arm, davinci: add support for am1808 based enbw_cmc board
Ilya Yanok (10):
davinci_emac: move arch-independent defines to separate header
davinci_emac: use internal addresses in buffer descriptors
davinci_emac: conditionally compile specific PHY support
arm926ejs: add noop implementation for dcache ops
davinci_emac: fix for running with dcache enabled
davinci_emac: hardcode 100Mbps for AM35xx and RMII
AM35xx: add EMAC support
AM3517: move AM3517 specific mux defines to generic header
nand_spl_simple: add support for software ECC
omap_gpmc: use SOFTECC in SPL if it's enabled
Koen Kooi (1):
BeagleBoard: config: Really switch to ttyO2
Manjunath Hadli (1):
da850evm: pass board revision info to kernel
Marek Vasut (25):
PXA: Drop CERF250 board
PXA: Drop CRADLE board
PXA: Drop PLEB2 board
PXA: Drop XM250 board
PXA: Rework start.S to be closer to other ARMs
PXA: Re-add the Dcache locking as RAM for pxa250
PXA: Fixup PXA25x boards after start.S update
PXA: Drop Voipac PXA270 OneNAND IPL
PXA: Adapt Voipac PXA270 to OneNAND SPL
PXA: Enable command line editing for vpac270
PXA: Unify vpac270 environment size
PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X
PXA: Separate PXA2xx CPU init
PXA: Add cpuinfo display for PXA2xx
PXA: Replace timer driver
PXA: Cleanup Colibri PXA270
PXA: Export cpu_is_ and pxa_dram_init functions
PXA: Squash extern pxa_dram_init()
PXA: Rename pxa_dram_init to pxa2xx_dram_init
PXA: Introduce common configuration header for PXA
PXA: Flip colibri_pxa27x to pxa-common.h
PXA: Move colibri_pxa270 to board/toradex/
MC13892: Add REGMODE0 bits definitions
Efika: Configure additional regulators for HDMI output
MXS: Add static annotations to dma driver
Prabhakar Lad (1):
ARM: davici_emac: Fix condition for number of phy detects
Robert Deli?n (1):
M28: Fix OB1 bug in GPIO driver
Sanjeev Premi (2):
part_efi: Fix compile errors
omap3evm: Add support for EFI partitions
Simon Glass (1):
mx5: Correct a warning in clock.c
Simon Guinot (4):
netspace_v2: Read Ethernet MAC address from EEPROM
mvsata: fix ide_preinit for missing disks
ARM: add support for LaCie 2Big Network v2
ARM: remove duplicated code for LaCie boards
Simon Schwarz (3):
nand: Add common functions to linux/mtd/nand.h
Fix regression in SMDK6400
devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss
Stefano Babic (2):
MX: serial_mxc: cleanup removing nasty #ifdef
MX35: flea3: changes due to hardware revision B
Sughosh Ganu (1):
davinci: Remove unwanted memsize.c from hawkboard's nand spl build
Thomas Weber (3):
ARM: OMAP3: Remove unused define CONFIG_OMAP3430
ARM: OMAP3: Remove unused define SDRC_R_C_B
ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused
Tim Schendekehl (1):
Ethernut 5 board support
Tom Rini (15):
omap3: mem: Comment enable_gpmc_cs_config more
OMAP3: Update SDRC dram_init to always call make_cs1_contiguous()
OMAP3: Add a helper function to set timings in SDRC
OMAP3: Change mem_ok to clear again after reading back
OMAP3: Remove get_mem_type prototype
omap3: mem: Add MCFG helper macro
OMAP3: Add optimal SDRC autorefresh control values
OMAP3: Suffix all Micron memory timing parts with their speed
OMAP3 SPL: Rework memory initalization and devkit8000 support
OMAP3 SPL: Add identify_nand_chip function
OMAP3: Add SPL support to Beagleboard
OMAP3: Add SPL support to omap3_evm
AM3517: Add SPL support
AM3517 CraneBoard: Add SPL support
OMAP3: Add SPL_BOARD_INIT hook
Wolfram Sang (1):
apbh_dma: return error value on timeout
MAINTAINERS | 11 +-
arch/arm/cpu/arm1136/mx31/devices.c | 4 -
arch/arm/cpu/arm926ejs/Makefile | 2 +-
arch/arm/cpu/arm926ejs/cache.c | 75 ++
arch/arm/cpu/arm926ejs/davinci/Makefile | 3 +-
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 36 +-
arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 171 ++++
arch/arm/cpu/arm926ejs/davinci/dp83848.c | 1 +
arch/arm/cpu/arm926ejs/davinci/et1011c.c | 1 +
arch/arm/cpu/arm926ejs/davinci/ksz8873.c | 1 +
arch/arm/cpu/arm926ejs/davinci/lxt972.c | 1 +
.../arm/cpu/arm926ejs/davinci}/misc.c | 19 +-
.../arm/cpu/arm926ejs/davinci/pinmux.c | 0
arch/arm/cpu/arm926ejs/start.S | 14 +-
arch/arm/cpu/armv7/Makefile | 4 +-
arch/arm/cpu/armv7/cpu.c | 1 +
arch/arm/cpu/armv7/mx5/clock.c | 2 +-
arch/arm/cpu/armv7/omap-common/clocks-common.c | 16 +-
arch/arm/cpu/armv7/omap-common/emif-common.c | 4 +-
arch/arm/cpu/armv7/omap-common/spl.c | 10 +-
arch/arm/cpu/armv7/omap3/Makefile | 4 +
arch/arm/cpu/armv7/omap3/board.c | 5 +
.../vpac270.c => arch/arm/cpu/armv7/omap3/emac.c | 34 +-
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 8 +
arch/arm/cpu/armv7/omap3/mem.c | 13 +-
arch/arm/cpu/armv7/omap3/sdrc.c | 145 ++--
arch/arm/cpu/armv7/omap3/spl_id_nand.c | 87 +++
arch/arm/cpu/armv7/omap4/hwinit.c | 17 +-
arch/arm/cpu/armv7/start.S | 38 +-
arch/arm/cpu/pxa/Makefile | 7 +-
arch/arm/cpu/pxa/cpuinfo.c | 132 ++++
arch/arm/cpu/pxa/{cpu.c => pxa2xx.c} | 119 ++--
arch/arm/cpu/pxa/start.S | 456 ++++++------
arch/arm/cpu/pxa/timer.c | 91 +--
arch/arm/cpu/pxa/u-boot.lds | 6 +
arch/arm/cpu/pxa/usb.c | 12 +-
arch/arm/include/asm/arch-davinci/emac_defs.h | 289 -------
arch/arm/include/asm/arch-davinci/hardware.h | 41 +
arch/arm/include/asm/arch-davinci/pinmux_defs.h | 51 ++
arch/arm/include/asm/arch-mx25/imx-regs.h | 10 +-
arch/arm/include/asm/arch-mx27/imx-regs.h | 8 +-
arch/arm/include/asm/arch-mx28/dma.h | 25 -
arch/arm/include/asm/arch-mx31/imx-regs.h | 6 +
arch/arm/include/asm/arch-mx35/imx-regs.h | 6 +-
arch/arm/include/asm/arch-mx5/imx-regs.h | 6 +-
arch/arm/include/asm/arch-omap3/am35x_def.h | 3 +
arch/arm/include/asm/arch-omap3/emac_defs.h | 56 ++
arch/arm/include/asm/arch-omap3/mem.h | 156 +++--
arch/arm/include/asm/arch-omap3/mux.h | 41 +
arch/arm/include/asm/arch-omap3/omap3.h | 1 +
arch/arm/include/asm/arch-omap3/sys_proto.h | 4 +-
arch/arm/include/asm/arch-omap4/omap.h | 2 +
arch/arm/include/asm/arch-omap5/clocks.h | 16 +-
arch/arm/include/asm/arch-pxa/pxa-regs.h | 48 +-
.../arm/include/asm/arch-pxa/pxa.h | 40 +-
arch/arm/include/asm/omap_common.h | 5 +
arch/arm/lib/eabi_compat.c | 2 +
board/CarMediaLab/flea3/flea3.c | 4 +-
board/LaCie/common/common.c | 87 +++
board/LaCie/common/common.h | 20 +
board/LaCie/edminiv2/Makefile | 5 +-
board/LaCie/edminiv2/edminiv2.c | 30 +-
board/{cradle => LaCie/net2big_v2}/Makefile | 33 +-
board/LaCie/net2big_v2/kwbimage.cfg | 162 ++++
board/LaCie/net2big_v2/net2big_v2.c | 126 +++
.../edminiv2.h => net2big_v2/net2big_v2.h} | 32 +-
board/LaCie/netspace_v2/Makefile | 5 +-
board/LaCie/netspace_v2/netspace_v2.c | 51 +-
board/LaCie/netspace_v2/netspace_v2.h | 8 -
board/ait/cam_enc_4xx/cam_enc_4xx.c | 15 -
board/balloon3/balloon3.c | 4 +-
board/cerf250/Makefile | 43 -
board/cerf250/cerf250.c | 85 --
board/cerf250/flash.c | 429 -----------
board/cradle/cradle.c | 236 ------
board/cradle/flash.c | 361 ---------
board/davinci/da8xxevm/da830evm.c | 2 -
board/davinci/da8xxevm/da850evm.c | 165 +----
board/davinci/da8xxevm/hawkboard_nand_spl.c | 59 +--
board/davinci/ea20/ea20.c | 2 -
board/efikamx/efikamx.c | 15 +-
board/{pleb2 => egnite/ethernut5}/Makefile | 20 +-
board/egnite/ethernut5/ethernut5.c | 270 +++++++
board/egnite/ethernut5/ethernut5_pwrman.c | 338 ++++++++
board/egnite/ethernut5/ethernut5_pwrman.h | 68 ++
board/{davinci/common => enbw/enbw_cmc}/Makefile | 12 +-
board/enbw/enbw_cmc/enbw_cmc.c | 607 +++++++++++++++
board/freescale/mx51evk/mx51evk.c | 3 +
board/freescale/mx53ard/mx53ard.c | 3 +
board/freescale/mx53evk/mx53evk.c | 3 +
board/freescale/mx53loco/mx53loco.c | 3 +
board/freescale/mx53smd/mx53smd.c | 1 +
board/logicpd/am3517evm/am3517evm.c | 2 +-
board/logicpd/am3517evm/am3517evm.h | 40 -
board/logicpd/am3517evm/config.mk | 30 -
board/lubbock/lubbock.c | 4 +-
board/palmld/palmld.c | 4 +-
board/palmtc/palmtc.c | 4 +-
board/pleb2/flash.c | 814
--------------------
board/pleb2/pleb2.c | 71 --
board/pxa255_idp/pxa_idp.c | 4 +-
board/ti/am3517crane/am3517crane.c | 2 +-
board/ti/am3517crane/am3517crane.h | 39 -
board/ti/am3517crane/config.mk | 29 -
board/ti/beagle/beagle.c | 71 ++-
board/ti/beagle/config.mk | 33 -
board/ti/evm/config.mk | 33 -
board/ti/evm/evm.c | 41 +-
board/ti/panda/panda_mux_data.h | 2 +-
board/ti/sdp4430/sdp.c | 7 +
board/ti/sdp4430/sdp4430_mux_data.h | 6 +-
board/timll/devkit8000/devkit8000.c | 21 +
board/{ => toradex}/colibri_pxa270/Makefile | 0
.../{ => toradex}/colibri_pxa270/colibri_pxa270.c | 36 +-
board/trizepsiv/conxs.c | 4 +-
board/vpac270/Makefile | 4 +
board/vpac270/onenand.c | 65 ++
board/vpac270/u-boot-spl.lds | 92 +++
board/vpac270/vpac270.c | 6 +-
board/xaeniax/xaeniax.c | 4 +-
board/xm250/Makefile | 43 -
board/xm250/flash.c | 535 -------------
board/xm250/xm250.c | 95 ---
board/zipitz2/zipitz2.c | 4 +-
boards.cfg | 15 +-
common/lcd.c | 14 +-
disk/part_efi.c | 2 +-
doc/README.scrapyard | 4 +
drivers/block/mvsata_ide.c | 14 +-
drivers/dma/apbh_dma.c | 211 ++----
drivers/gpio/mxs_gpio.c | 2 +-
drivers/mmc/pxa_mmc.c | 7 +-
drivers/mmc/pxa_mmc_gen.c | 4 +-
drivers/mtd/nand/nand_base.c | 6 +-
drivers/mtd/nand/nand_ecc.c | 2 +-
drivers/mtd/nand/nand_spl_simple.c | 11 +-
drivers/mtd/nand/omap_gpmc.c | 4 +-
drivers/mtd/nand/s3c64xx.c | 28 +-
drivers/net/armada100_fec.c | 14 +-
drivers/net/davinci_emac.c | 94 ++-
drivers/net/davinci_emac.h | 315 ++++++++
drivers/net/lan91c96.h | 4 +-
drivers/net/smc91111.h | 6 +-
drivers/rtc/davinci.c | 26 -
drivers/serial/serial_mxc.c | 37 +-
drivers/serial/serial_pxa.c | 4 +-
drivers/serial/usbtty.h | 2 +-
drivers/usb/gadget/Makefile | 2 +-
include/configs/am3517_crane.h | 64 ++-
include/configs/am3517_evm.h | 64 ++-
include/configs/apollon.h | 4 -
include/configs/balloon3.h | 2 +-
include/configs/cerf250.h | 229 ------
include/configs/cm_t35.h | 8 -
include/configs/colibri_pxa270.h | 103 +--
include/configs/cradle.h | 358 ---------
include/configs/da850_am18xxevm.h | 3 +-
include/configs/da850evm.h | 1 +
include/configs/davinci_dm6467Tevm.h | 1 +
include/configs/devkit8000.h | 24 +-
include/configs/dig297.h | 4 -
include/configs/efikamx.h | 2 +-
include/configs/enbw_cmc.h | 451 +++++++++++
include/configs/ethernut5.h | 287 +++++++
include/configs/flea3.h | 22 +-
include/configs/hawkboard.h | 1 +
include/configs/igep0020.h | 4 -
include/configs/igep0030.h | 4 -
include/configs/imx27lite-common.h | 2 +-
include/configs/imx31_litekit.h | 4 +-
include/configs/imx31_phycore.h | 2 +-
include/configs/{netspace_v2.h => lacie_kw.h} | 29 +-
include/configs/lubbock.h | 4 +-
include/configs/mx25pdk.h | 2 +-
include/configs/mx31ads.h | 4 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mx35pdk.h | 2 +-
include/configs/mx51evk.h | 2 +-
include/configs/mx53ard.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53loco.h | 2 +-
include/configs/mx53smd.h | 2 +-
include/configs/omap3_beagle.h | 71 ++-
include/configs/omap3_evm.h | 34 +
include/configs/omap3_evm_common.h | 41 +-
include/configs/omap3_evm_quick_mmc.h | 10 +
include/configs/omap3_evm_quick_nand.h | 22 +
include/configs/omap3_mvblx.h | 10 +-
include/configs/omap3_overo.h | 10 +-
include/configs/omap3_pandora.h | 10 +-
include/configs/omap3_sdp3430.h | 10 +-
include/configs/omap3_zoom1.h | 10 +-
include/configs/omap3_zoom2.h | 10 +-
include/configs/omap4_common.h | 20 +-
include/configs/omap5_evm.h | 19 +-
include/configs/palmld.h | 2 +-
include/configs/palmtc.h | 4 +-
include/configs/pleb2.h | 266 -------
include/configs/pxa-common.h | 60 ++
include/configs/pxa255_idp.h | 4 +-
include/configs/qong.h | 4 +-
include/configs/trizepsiv.h | 2 +-
include/configs/tt01.h | 2 +-
include/configs/tx25.h | 2 +-
include/configs/vision2.h | 2 +-
include/configs/vpac270.h | 43 +-
include/configs/xaeniax.h | 4 +-
include/configs/xm250.h | 369 ---------
include/configs/zipitz2.h | 2 +-
include/configs/zmx25.h | 2 +-
include/lcd.h | 5 +-
include/linux/mtd/nand.h | 7 +
include/mc13892.h | 16 +
include/nand.h | 3 -
nand_spl/board/davinci/da8xxevm/Makefile | 26 +-
nand_spl/board/samsung/smdk6400/Makefile | 9 +-
onenand_ipl/board/vpac270/Makefile | 79 --
onenand_ipl/board/vpac270/config.mk | 1 -
tools/omap/clocks_get_m_n.c | 187 +++---
219 files changed, 5433 insertions(+), 6288 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/cache.c
create mode 100644 arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c
rename {board/davinci/common => arch/arm/cpu/arm926ejs/davinci}/misc.c
(90%)
rename board/davinci/common/davinci_pinmux.c =>
arch/arm/cpu/arm926ejs/davinci/pinmux.c (100%)
rename onenand_ipl/board/vpac270/vpac270.c =>
arch/arm/cpu/armv7/omap3/emac.c (58%)
create mode 100644 arch/arm/cpu/armv7/omap3/spl_id_nand.c
create mode 100644 arch/arm/cpu/pxa/cpuinfo.c
rename arch/arm/cpu/pxa/{cpu.c => pxa2xx.c} (76%)
create mode 100644 arch/arm/include/asm/arch-davinci/pinmux_defs.h
create mode 100644 arch/arm/include/asm/arch-omap3/emac_defs.h
rename onenand_ipl/board/vpac270/u-boot.onenand.lds =>
arch/arm/include/asm/arch-pxa/pxa.h (50%)
create mode 100644 board/LaCie/common/common.c
create mode 100644 board/LaCie/common/common.h
rename board/{cradle => LaCie/net2big_v2}/Makefile (57%)
create mode 100644 board/LaCie/net2big_v2/kwbimage.cfg
create mode 100644 board/LaCie/net2big_v2/net2big_v2.c
rename board/LaCie/{edminiv2/edminiv2.h => net2big_v2/net2big_v2.h} (50%)
delete mode 100644 board/cerf250/Makefile
delete mode 100644 board/cerf250/cerf250.c
delete mode 100644 board/cerf250/flash.c
delete mode 100644 board/cradle/cradle.c
delete mode 100644 board/cradle/flash.c
rename board/{pleb2 => egnite/ethernut5}/Makefile (73%)
create mode 100644 board/egnite/ethernut5/ethernut5.c
create mode 100644 board/egnite/ethernut5/ethernut5_pwrman.c
create mode 100644 board/egnite/ethernut5/ethernut5_pwrman.h
rename board/{davinci/common => enbw/enbw_cmc}/Makefile (88%)
create mode 100644 board/enbw/enbw_cmc/enbw_cmc.c
delete mode 100644 board/logicpd/am3517evm/config.mk
delete mode 100644 board/pleb2/flash.c
delete mode 100644 board/pleb2/pleb2.c
delete mode 100644 board/ti/am3517crane/config.mk
delete mode 100644 board/ti/beagle/config.mk
delete mode 100644 board/ti/evm/config.mk
rename board/{ => toradex}/colibri_pxa270/Makefile (100%)
rename board/{ => toradex}/colibri_pxa270/colibri_pxa270.c (81%)
create mode 100644 board/vpac270/onenand.c
create mode 100644 board/vpac270/u-boot-spl.lds
delete mode 100644 board/xm250/Makefile
delete mode 100644 board/xm250/flash.c
delete mode 100644 board/xm250/xm250.c
create mode 100644 drivers/net/davinci_emac.h
delete mode 100644 include/configs/cerf250.h
delete mode 100644 include/configs/cradle.h
create mode 100644 include/configs/enbw_cmc.h
create mode 100644 include/configs/ethernut5.h
rename include/configs/{netspace_v2.h => lacie_kw.h} (88%)
delete mode 100644 include/configs/pleb2.h
create mode 100644 include/configs/pxa-common.h
delete mode 100644 include/configs/xm250.h
delete mode 100644 onenand_ipl/board/vpac270/Makefile
delete mode 100644 onenand_ipl/board/vpac270/config.mk
Amicalement,
--
Albert.
next reply other threads:[~2011-12-06 23:17 UTC|newest]
Thread overview: 259+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-06 23:17 Albert ARIBAUD [this message]
2011-12-07 10:16 ` [U-Boot] Pull request: u-boot-arm/master Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2016-01-31 20:40 Albert ARIBAUD
2016-02-01 16:54 ` Tom Rini
2015-11-10 17:45 Albert ARIBAUD
2015-11-10 20:15 ` Tom Rini
2015-10-15 21:19 Albert ARIBAUD
2015-10-15 22:00 ` Tom Rini
2015-07-31 1:06 Albert ARIBAUD
2015-08-01 14:47 ` Tom Rini
2015-07-06 15:20 Albert ARIBAUD
2015-07-06 21:15 ` Tom Rini
2015-07-06 22:09 ` Albert ARIBAUD
2015-07-06 23:59 ` Tom Rini
2015-07-07 5:49 ` Albert ARIBAUD
2015-07-07 10:01 ` Albert ARIBAUD
2015-07-02 21:27 Albert ARIBAUD
2015-07-02 22:55 ` Tom Rini
2015-07-05 14:11 ` Albert ARIBAUD
2015-05-05 9:30 Albert ARIBAUD
2015-05-05 23:59 ` Tom Rini
2015-01-04 18:11 Albert ARIBAUD
2015-01-05 15:10 ` Tom Rini
2014-11-24 17:30 Albert ARIBAUD
2014-11-24 22:13 ` Tom Rini
2014-11-13 7:54 Albert ARIBAUD
2014-11-08 0:07 Albert ARIBAUD
2014-11-10 21:28 ` Tom Rini
2014-10-11 0:38 Albert ARIBAUD
2014-10-11 11:49 ` Tom Rini
2014-10-07 11:16 Albert ARIBAUD
2014-10-07 16:02 ` Tom Rini
2014-09-17 21:40 Albert ARIBAUD
2014-09-18 1:00 ` Tom Rini
2014-09-12 13:42 Albert ARIBAUD
2014-09-12 19:15 ` Tom Rini
2014-07-29 13:08 Albert ARIBAUD
2014-07-29 14:30 ` Tom Rini
2014-07-05 8:18 Albert ARIBAUD
2014-07-05 16:48 ` Tom Rini
2014-07-04 22:57 Albert ARIBAUD
2014-07-05 0:20 ` Tom Rini
2014-07-02 20:33 Albert ARIBAUD
2014-07-02 22:38 ` Tom Rini
2014-06-08 7:51 Albert ARIBAUD
2014-06-09 2:25 ` Tom Rini
2014-05-30 15:20 Albert ARIBAUD
2014-05-30 17:59 ` Tom Rini
2014-05-24 9:32 Albert ARIBAUD
2014-05-24 20:37 ` Tom Rini
2014-05-20 8:57 Albert ARIBAUD
2014-05-22 19:12 ` Tom Rini
2014-05-09 9:56 Albert ARIBAUD
2014-05-09 16:15 ` Tom Rini
2014-04-08 11:40 Albert ARIBAUD
2014-04-08 16:39 ` Tom Rini
2014-03-10 18:16 Albert ARIBAUD
2014-03-10 21:27 ` Tom Rini
2014-02-26 21:40 Albert ARIBAUD
2014-02-26 23:39 ` Tom Rini
2014-02-13 17:43 Albert ARIBAUD
2014-02-18 17:50 ` Tom Rini
2014-02-18 18:21 ` Stephen Warren
2014-02-18 18:29 ` Tom Rini
2014-02-18 18:47 ` Albert ARIBAUD
2014-01-15 15:16 Albert ARIBAUD
2014-01-14 13:04 Albert ARIBAUD
2014-01-14 21:02 ` Tom Rini
2014-01-13 18:49 Albert ARIBAUD
2014-01-13 19:42 ` Tom Rini
2014-01-10 15:43 Albert ARIBAUD
2014-01-10 20:03 ` Tom Rini
2014-01-11 8:11 ` Albert ARIBAUD
2013-12-10 22:05 Albert ARIBAUD
2013-12-11 16:44 ` Tom Rini
2013-11-09 22:53 Albert ARIBAUD
2013-11-11 19:13 ` Tom Rini
2013-10-11 14:33 Albert ARIBAUD
2013-10-14 15:20 ` Tom Rini
2013-10-07 20:02 Albert ARIBAUD
2013-10-08 19:33 ` Tom Rini
2013-10-03 20:42 Albert ARIBAUD
2013-10-04 18:46 ` Tom Rini
2013-10-02 15:34 Albert ARIBAUD
2013-10-02 18:20 ` Tom Rini
2013-09-12 13:18 Albert ARIBAUD
2013-09-12 15:11 ` Tom Rini
2013-09-12 20:54 ` Albert ARIBAUD
2013-09-06 22:55 Albert ARIBAUD
2013-09-09 14:56 ` Tom Rini
2013-07-10 20:33 [U-Boot] pull " Albert ARIBAUD
2013-06-21 21:52 [U-Boot] Pull " Albert ARIBAUD
2013-06-24 20:17 ` Tom Rini
2013-06-13 15:49 Albert ARIBAUD
2013-06-14 15:11 ` Tom Rini
2013-06-05 15:02 [U-Boot] pull " Albert ARIBAUD
2013-06-07 18:20 ` Tom Rini
2013-05-30 19:29 [U-Boot] Pull " Albert ARIBAUD
2013-05-31 20:51 ` Tom Rini
2013-04-17 16:37 Albert ARIBAUD
2013-04-18 20:17 ` Tom Rini
2013-04-15 19:36 Albert ARIBAUD
2013-04-16 15:58 ` Tom Rini
2013-04-14 19:32 Albert ARIBAUD
2013-04-15 15:51 ` Tom Rini
2013-04-10 23:12 Albert ARIBAUD
2013-04-10 23:20 ` Benoît Thébaudeau
2013-04-11 6:10 ` Albert ARIBAUD
2013-03-28 20:06 Albert ARIBAUD
2013-03-29 0:01 ` Tom Rini
2013-03-15 22:01 Albert ARIBAUD
2013-03-16 8:19 ` Albert ARIBAUD
2013-03-17 19:40 ` Tom Rini
2013-03-18 17:06 ` Tom Rini
2013-03-18 17:43 ` Albert ARIBAUD
2013-03-18 18:38 ` Tom Rini
2013-02-12 14:25 Albert ARIBAUD
2013-02-15 16:33 ` Tom Rini
2013-01-14 16:58 Albert ARIBAUD
2013-01-14 23:18 ` Tom Rini
2013-01-11 21:36 Albert ARIBAUD
2013-01-11 23:44 ` Tom Rini
2013-01-09 14:43 Albert ARIBAUD
2013-01-09 19:35 ` Tom Rini
2013-01-08 15:07 Albert ARIBAUD
2013-01-08 20:50 ` Simon Glass
2013-01-08 21:01 ` Albert ARIBAUD
2013-01-08 21:06 ` Simon Glass
2013-01-08 22:34 ` Tom Rini
2012-12-22 12:11 Albert ARIBAUD
2012-12-22 15:20 ` Tom Rini
2013-01-03 6:41 ` Joonyoung Shim
2013-01-03 7:12 ` Lukasz Majewski
2012-11-04 21:51 Albert ARIBAUD
2012-11-05 16:54 ` Tom Rini
2012-11-05 19:45 ` Stephen Warren
2012-11-08 15:08 ` Tom Rini
2012-10-26 22:30 Albert ARIBAUD
2012-10-27 0:20 ` Tom Rini
2012-10-19 23:55 Albert ARIBAUD
2012-10-20 17:39 ` Tom Rini
2012-10-05 19:26 Albert ARIBAUD
2012-10-05 22:26 ` Tom Rini
2012-10-04 16:57 Albert ARIBAUD
2012-10-04 18:31 ` Tom Rini
2012-09-21 21:35 Albert ARIBAUD
2012-09-22 0:21 ` Tom Rini
2012-09-01 16:37 Albert ARIBAUD
2012-09-01 22:27 ` Wolfgang Denk
2012-07-10 6:30 Albert ARIBAUD
2012-07-10 7:04 ` Wolfgang Denk
2012-07-07 12:12 Albert ARIBAUD
2012-07-08 20:13 ` Wolfgang Denk
2012-05-15 6:57 Albert ARIBAUD
2012-05-20 20:33 ` Wolfgang Denk
2012-04-16 14:52 Albert ARIBAUD
2012-04-16 18:18 ` Marek Vasut
2012-04-16 20:09 ` Albert ARIBAUD
2012-04-16 20:15 ` Albert ARIBAUD
2012-04-17 5:33 ` Stefano Babic
2012-03-30 7:10 Albert ARIBAUD
2012-03-30 17:58 ` Wolfgang Denk
2012-02-27 20:23 Albert ARIBAUD
2012-03-03 14:09 ` Wolfgang Denk
2012-02-12 9:16 Albert ARIBAUD
2012-02-12 21:06 ` Wolfgang Denk
2012-01-16 8:16 Albert ARIBAUD
2012-01-17 21:36 ` Wolfgang Denk
2011-12-24 9:27 Albert ARIBAUD
2012-01-05 15:53 ` Wolfgang Denk
2011-12-19 16:55 Albert ARIBAUD
2011-12-20 21:40 ` Wolfgang Denk
2011-12-11 13:38 Albert ARIBAUD
2011-12-12 6:58 ` Wolfgang Denk
2011-12-09 16:42 Albert ARIBAUD
2011-12-10 21:54 ` Wolfgang Denk
2011-11-15 21:28 Albert ARIBAUD
2011-11-16 0:04 ` Simon Glass
2011-11-16 2:27 ` Marek Vasut
2011-11-16 3:45 ` Simon Glass
2011-11-16 3:53 ` Mike Frysinger
2011-11-16 4:05 ` Simon Glass
2011-11-16 19:24 ` Wolfgang Denk
2011-11-17 13:45 ` Albert ARIBAUD
2011-11-17 21:39 ` Mike Frysinger
2011-11-17 21:56 ` Wolfgang Denk
2011-11-17 22:03 ` Albert ARIBAUD
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF1740D74CB5@HQMAIL01.nvidia.com>
[not found] ` <7E91C59574E9954FA075F8D8CCDF78DB38FE7FF7A9@HQMAIL04.nvidia.com>
2011-11-17 22:04 ` Simon Glass
2011-11-16 6:28 ` Heiko Schocher
2011-11-16 19:42 ` Wolfgang Denk
2011-11-07 20:58 Albert ARIBAUD
2011-11-08 0:02 ` Wolfgang Denk
2011-09-30 20:09 Albert ARIBAUD
2011-10-01 19:40 ` Wolfgang Denk
2011-10-04 5:35 ` Simon Glass
2011-10-21 18:44 ` Albert ARIBAUD
2011-10-21 19:12 ` Simon Glass
2011-09-28 6:38 Albert ARIBAUD
2011-09-28 18:42 ` Wolfgang Denk
2011-09-22 21:03 Albert ARIBAUD
2011-09-23 6:29 ` Wolfgang Denk
2011-09-14 6:57 Albert ARIBAUD
2011-09-15 12:24 ` Wolfgang Denk
2011-08-31 10:13 Albert ARIBAUD
2011-08-31 11:57 ` Marek Vasut
2011-09-01 8:59 ` Aneesh V
2011-09-03 19:26 ` Albert ARIBAUD
2011-09-04 8:44 ` Aneesh V
2011-09-04 9:01 ` Albert ARIBAUD
2011-09-04 9:02 ` Aneesh V
2011-09-04 9:12 ` Albert ARIBAUD
2011-09-04 9:17 ` Aneesh V
2011-08-04 12:28 Albert ARIBAUD
2011-07-18 13:38 Albert ARIBAUD
2011-07-18 14:31 ` Igor Grinberg
2011-07-18 17:52 ` Albert ARIBAUD
2011-08-12 8:21 ` Albert ARIBAUD
2011-07-18 19:17 ` Wolfgang Denk
2011-07-04 9:08 Albert ARIBAUD
2011-07-04 22:32 ` Wolfgang Denk
2011-06-30 6:24 Albert ARIBAUD
2011-06-30 11:15 ` Albert ARIBAUD
2011-06-28 5:39 Albert ARIBAUD
2011-06-28 9:52 ` Igor Grinberg
2011-06-28 10:20 ` Igor Grinberg
2011-06-28 21:19 ` Albert ARIBAUD
2011-06-28 10:48 ` Wolfgang Denk
2011-06-29 6:09 ` Albert ARIBAUD
2011-06-29 21:09 ` Wolfgang Denk
2011-06-21 20:28 Albert ARIBAUD
2011-06-22 9:17 ` Wolfgang Denk
2011-06-22 12:18 ` Wolfgang Denk
2011-06-22 13:51 ` Albert ARIBAUD
2011-06-08 20:41 Albert ARIBAUD
2011-06-08 21:32 ` Wolfgang Denk
2011-05-31 20:31 Albert ARIBAUD
2011-05-31 22:29 ` John Rigby
2011-06-01 17:15 ` Albert ARIBAUD
2011-06-01 20:15 ` Wolfgang Denk
2011-05-11 21:07 Albert ARIBAUD
2011-05-11 22:11 ` Rogan Dawes
2011-05-12 5:41 ` Albert ARIBAUD
2011-05-12 8:48 ` Prafulla Wadaskar
2011-05-12 9:06 ` Simon Guinot
2011-05-12 9:12 ` Simon Guinot
2011-05-12 17:27 ` Wolfgang Denk
2011-05-14 18:38 ` Dirk Behme
2011-04-28 16:14 Albert ARIBAUD
2011-04-28 21:17 ` Wolfgang Denk
2011-04-27 17:40 Albert ARIBAUD
2011-04-27 20:16 ` Wolfgang Denk
2011-04-27 23:42 ` Macpaul Lin
2011-04-28 21:14 ` Wolfgang Denk
2011-04-29 1:31 ` Macpaul Lin
2011-04-30 20:44 ` Wolfgang Denk
2011-05-02 8:46 ` Macpaul Lin
2011-05-02 10:31 ` Wolfgang Denk
2011-03-27 17:25 Albert ARIBAUD
2011-03-27 19:32 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EDEA289.9070805@aribaud.net \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.