From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-arm/master
Date: Fri, 31 May 2013 16:51:59 -0400 [thread overview]
Message-ID: <20130531205159.GT11917@bill-the-cat> (raw)
In-Reply-To: <20130530212921.345b05fc@lilith>
On Thu, May 30, 2013 at 09:29:21PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> a71d45d706a5b51c348160163b6c159632273fed:
>
> powerpc/mpc85xx: Clear L1 D-cache lock (2013-05-24 16:54:14 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 3da0e5750b24a9491058df6126c7be577a276c09:
>
> arm: factorize relocate_code routine (2013-05-30 20:24:38 +0200)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (9):
> Merge branch 'u-boot-pxa/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Revert wrong removal of nand_init and nand_deselect
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot/master' into 'u-boot-arm/master'
> mx31pdk: copy SPL directly, not using relocate_code.
> tx25: copy SPL directly, not using relocate_code.
> arm: do not compile relocate_code() for SPL builds
> arm: factorize relocate_code routine
>
> Allen Martin (1):
> Tegra: clk: always use find_best_divider() for periph clocks
>
> Andre Przywara (2):
> ARM: vexpress: add support for Versatile Express Cortex-A15-TC2
> ARM: vexpress: enable bootz and hush parser for all VExpress
> boards
>
> Andreas Bie??mann (1):
> at91sam9260ek: move board id setup to config header
>
> Axel Lin (2):
> ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for
> cpu_init_crit tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build
>
> Beno??t Th??baudeau (40):
> imx: Homogenize and fix fuse register definitions
> imx: Add useful fuse definitions
> Add fuse API and commands
> Add fsl_iim driver
> mpc: iim: Switch to common fsl_iim
> mx51evk: Enable support for iim
> Add mxc_ocotp driver
> mx6qsabrelite: Enable support for ocotp
> nitrogen6x: Enable support for ocotp
> imx: Document fuse assignments for MAC addresses
> imx: iomux-v3: Fix common pad control definitions
> imx: iomux-v3: cosmetic: Reorganize definitions
> imx: iomux-v3: Restore Linux's NEW_PAD_CTRL() macro
> imx: iomux-v3: Include PKE and PUE to pad control pull definitions
> imx: iomux-v3: Add iomux-mx25.h
> imx: mx25pdk: Convert to iomux-v3
> imx: mx25pdk: Fix GPIO assignments
> imx: tx25: Convert to iomux-v3
> imx: zmx25: Convert to iomux-v3
> imx: mx25: Remove legacy iomux support
> imx: iomux-v3: Add iomux-mx35.h
> imx: flea3: Convert to iomux-v3
> imx: mx35pdk: Fix WDOG_RST iomux function
> imx: mx35pdk: Convert to iomux-v3
> imx: woodburn: Convert to iomux-v3
> imx: mx35: Remove legacy iomux support
> imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27
> imx: iomux-v3: Add missing definitions to iomux-mx51.h
> imx: mx51evk: Convert to iomux-v3
> imx: mx51_efikamx/sb: Convert to iomux-v3
> imx: vision2: Convert to iomux-v3
> imx: iomux-v3: Add iomux-mx53.h
> imx: ima3-mx53: Convert to iomux-v3
> imx: mx53ard: Convert to iomux-v3
> imx: mx53evk: Convert to iomux-v3
> imx: mx53loco: Convert to iomux-v3
> imx: mx53smd: Convert to iomux-v3
> imx: m53evk: Convert to iomux-v3
> imx: mx5: Remove legacy iomux support
> imx: mx35pdk: Fix MUX2_CTR GPIO
>
> Bo Shen (9):
> spi: atmel_spi: using ip version to check whether has wdrbt
> mmc: atmel_mci: using IP version for different setting
> mmc: atmel_mci: add mmc card support
> ARM: at91: add Atmel sama5d3 SoC new pmc register
> USB: ohci-at91: support sama5d3x devices
> ARM: atmel: add sama5d3xek support
> ARM: at91: fix and update README.at91 document
> ARM: at91: add at91sam9x5 and sama5d3x information
> ARM: at91: add NAND partition table and index
>
> Dan Murphy (2):
> ARM:Panda:Fix device tree loading for the panda-es
> ARM: Panda: Add flag to allow runtime enviroment varibale mods
>
> David Andrey (3):
> arm: zynq: U-Boot udelay < 1000 FIX
> net: gem: Pass phy address to init
> net: gem: Preserve clk on emio interface
>
> Enric Balletbo i Serra (2):
> Add DDR3 support for IGEP COM AQUILA/CYGNUS.
> ARM: Add support for IGEP COM AQUILA/CYGNUS
>
> Eric Benard (3):
> mx28evk: add trimffs to nand command
> da850: provide davinci_enable_uart0
> davinci: handle CONFIG_SYS_CLE_MASK and CONFIG_SYS_ALE_MASK
>
> Fabio Estevam (22):
> iomux-v3: Place pad control definitions into common file
> mx6: Add solo-lite variant support
> mx6sl: Add initial support for mx6slevk board
> imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register
> nitrogen6x: Setup CCM_CCOSR register
> mx51evk: Update environment in order to allow booting a dt kernel
> mx51evk: Do not force the rootfs type
> mx5: Define a common get_board_rev()
> mx5: Select CONFIG_REVISION_TAG
> mx53ard: Move register masks into imx-regs.h
> mx23: Put back RAM voltage level to its original value
> mx23: Fix pad voltage selection bit
> mx23evk: Fix DDR pin iomux settings
> mx23_olinuxino: Fix DDR pin iomux settings
> mxs: spl_mem_init: Fix comment about start bit
> mxs: spl_mem_init: Remove erroneous DDR setting
> mxs: spl_mem_init: Skip the initialization of some DRAM_CTL
> registers mxs: spl_mem_init: Change EMI port priority
> mx23: Operate DDR voltage supply at 2.5V
> mx23evk: Do not set voltage selection bit for SSP pads
> mx23_olinuxino: Do not set voltage selection bit for SSP pads
> mxs: Explain why some mx23 DDR registers are not configured
>
> Igor Grinberg (3):
> cm-t35: move cm-t35 to live in compulab directory
> MAINTAINERS: fix the cm-t35 board name
> cm-t35: update config file
>
> Lokesh Vutla (2):
> arm: omap: emif: Fix DDR3 init after warm reset
> ARM: OMAP5: Fix warm reset with USB cable connected
>
> Lubomir Popov (4):
> OMAP5: I2C: Enable i2c5 clocks
> OMAP5: I2C: Add I2C4 and I2C5 bases
> OMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and I2C5
> OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work
>
> Marek Vasut (13):
> tools: arm: imx: Implement BOOT_OFFSET command for imximage
> imx: Align the imximage header and payload to multiples of 4k
> nand: Add SPL_NAND support to mxc_nand_spl
> arm: imx: Pack u-boot.bin into uImage for SPL
> arm: mx5: Add SPL support code to MX5
> arm: mx5: Add NAND clock handling
> arm: mx5: Add support for DENX M53EVK
> arm: mx23: Fix VDDMEM misconfiguration
> arm: mxs: Preprocess u-boot.bd so they contain full path
> arm: mxs: Add LCDIF clock configuration function
> arm: mxs: Add LCDIF registers for i.MX233
> arm: mxs: Add MXS LCDIF driver
> arm: mxs: video: Enable MXS LCDIF on M28EVK
>
> Mark Jackson (1):
> Remove duplicate / unused #defines on AM335x boards
>
> Matt Porter (4):
> am33xx: add pll and clock support for TI814x CPSW
> cpsw: add support for TI814x slave_regs differences
> phy: add support for ET1011C phys
> ti814x_evm: enable CPSW support
>
> Michal Simek (20):
> arm: zynq: Rename XPSS_ prefix to ZYNQ_ for hardcoded SoC
> addresses zynq: Move scutimer baseaddr to hardware.h
> net: phy: Define Marvell 88e1518 phy
> net: gem: Remove WRAP bit from TX buffer description
> net: gem: Simplify return path in zynq_gem_recv
> net: gem: Do not initialize BDs again
> net: gem: Fix gem driver on 1Gbps LAN
> zynq: Move macros to hardware.h
> net: gem: Add support for phy autodetection
> mmc: Add support for Xilinx Zynq sdhci controller
> i2c: zynq: Add support for Xilinx Zynq
> fpga: Clean coding style
> fpga: Fix debug message compilation error
> cmd: fpga: Clean coding style
> cmd: fpga: Move fpga_loadbitstream to fpga.c
> fpga: Change the first parameter in fpga_loadbitstream
> cmd: fpga: Do not include net.h
> fpga: zynq: Add support for loading bitstream
> fpga: Check device name against bitstream name
> fpga: Remove all CONFIG_SYS_* fpga related options
>
> Mike Dunn (5):
> lib: import bitrev library from the linux kernel
> pxa_lcd: add the ACX544AKN lcd device
> pxa_lcd: make lcd_enable() a weak pointer
> pxa27x_udc: remove call to unimplemented set_GPIO_mode()
> mtd: nand: add driver for diskonchip g4 nand flash
>
> Nishanth Menon (10):
> twl4030: make twl4030_i2c_write_u8 prototype consistent
> twl4030: make twl4030_i2c_read_u8 prototype consistent
> twl6030: twl6030_i2c_[read|write]_u8 prototype consistent
> twl6030: move twl6030 register access functions to common header
> file twl6030: add header guard
> twl6035: rename to palmas
> palmas: rename init_settings to an generic palmas init
> palmas: rename twl6035_mmc1_poweron_ldo with an palmas generic
> function palmas: use palmas_i2c_[read|write]_u8
> palmas: add header guard
>
> Otavio Salvador (9):
> mx6qsabre{sd, auto}: Add update_sd_firmware support
> mx6qsabresd: Return status when initializing MMC
> wandboard: Use env storage info for mmcdev/mmcpart
> wandboard: Add update_sd_firmware support
> wandboard: Add card detection for SOM MicroSD card
> wandboard: Add support for Carrier Board MicroSD card
> wandboard: Add boot selection support
> mxs: mxsboot: Move sdcard BCB header to 4 sectors offset
> mx53ard: Rework default environment to support FDT, MMC and
> netboot
>
> Philip Paeps (2):
> mx35 iomux: correct offsets of IOMUX registers
> mx35 iomux: correct input select register index
>
> Ryan Harkin (2):
> ARM: vexpress: refactoring of Versatile Express CA9x4 support
> ARM: vexpress: create A5 specific board config
>
> SRICHARAN R (5):
> ARM: OMAP: Make omap_boot_parameters common across socs
> ARM: OMAP4/5: Make OMAPx_SRAM_SCRATCH_ defines common
> ARM: OMAP: Correct save_boot_params and replace with 'C' function
> ARM: OMAP: Cleanup boot parameters usage
> ARM: OMAP: Add arch_cpu_init function
>
> Shawn Guo (1):
> ARM: mx6: define CONFIG_ARM_ERRATA_742230
>
> Stefan Roese (7):
> arm: imx: Change iomux functions to void type
> imx: Move some header files from arch-mxs to imx-common
> imx: Move some i.MX common functions into the imx-common directory
> dma: Add i.MX6 support to drivers/dma/apbh_dma.c
> mtd: mxs_nand: Add support for i.MX6
> imx: Add titanium board support (i.MX6 based)
> arm: imx: Codingstyle enhancement of
> include/asm/arch-mx6/crm_regs.h
>
> Stefano Babic (1):
> Merge branch 'next'
>
> Stephen Warren (3):
> tegra: always build u-boot-nodtb-tegra.bin
> ARM: tegra: support SKU 1 of Tegra114
> ARM: tegra: support SKU 7 of Tegra20
>
> Suriyan Ramasami (1):
> ARM: Add Seagate GoFlex Home support
>
> Tom Rini (4):
> beagleboard: Update comment in get_board_rev()
> omap5_common: Add optargs variable for kernel command line args
> am33xx: Fix warning with CONFIG_DISPLAY_CPUINFO
> arm: Enable -ffunction-sections / -fdata-sections / --gc-sections
>
> Tom Warren (2):
> Tegra: T30: Beaver: Fix board/board_name env vars, s/b beaver,
> not cardhu Tegra: Remove unused/non-existent spl linker script reference
>
> Wu, Josh (4):
> arm: at91: add at91sam9n12 register definition
> arm: at91: add at91sam9n12ek board support
> arm: at91: enable mci support for at91sam9g20ek.
> arm: at91: add at91sam9g20ek_mmc_config, which can save
> environment in mmc card
>
> ??ukasz Da??ek (2):
> pxa: Add weak attribute to reset_cpu() function
> h2200: Add board reset support
>
> .gitignore | 1 +
> MAINTAINERS | 18 +-
> Makefile | 26 +-
> README | 5 +
> arch/arm/config.mk | 3 +
> arch/arm/cpu/arm1136/mx35/Makefile | 1 -
> arch/arm/cpu/arm1136/mx35/iomux.c | 114 --
> arch/arm/cpu/arm1136/start.S | 81 --
> arch/arm/cpu/arm1176/start.S | 77 --
> arch/arm/cpu/arm720t/start.S | 81 +-
> arch/arm/cpu/arm920t/start.S | 77 --
> arch/arm/cpu/arm925t/start.S | 77 --
> arch/arm/cpu/arm926ejs/at91/Makefile | 1 +
> arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 4 +
> arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c | 177 +++
> arch/arm/cpu/arm926ejs/at91/clock.c | 4 +-
> arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 8 +
> arch/arm/cpu/arm926ejs/mx25/generic.c | 117 --
> arch/arm/cpu/arm926ejs/mxs/Makefile | 10 +
> arch/arm/cpu/arm926ejs/mxs/clock.c | 93 ++
> arch/arm/cpu/arm926ejs/mxs/mxs.c | 65 +-
> arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 46 +-
> arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 50 +-
> arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd | 4 +-
> arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd | 4 +-
> arch/arm/cpu/arm926ejs/start.S | 81 --
> arch/arm/cpu/arm946es/start.S | 77 --
> arch/arm/cpu/arm_intcm/start.S | 77 --
> arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 103 +-
> arch/arm/cpu/armv7/am33xx/sys_info.c | 6 +-
> arch/arm/cpu/armv7/at91/Makefile | 52 +
> arch/arm/cpu/armv7/at91/clock.c | 125 ++
> arch/arm/cpu/armv7/at91/cpu.c | 90 ++
> arch/arm/cpu/armv7/at91/reset.c | 47 +
> arch/arm/cpu/armv7/at91/sama5d3_devices.c | 196 +++
> arch/arm/cpu/armv7/at91/timer.c | 139 +++
> arch/arm/cpu/armv7/lowlevel_init.S | 8 +-
> arch/arm/cpu/armv7/mx5/Makefile | 2 +-
> arch/arm/cpu/armv7/mx5/clock.c | 14 +-
> arch/arm/cpu/armv7/mx5/iomux.c | 186 ---
> arch/arm/cpu/armv7/mx5/soc.c | 7 +
> arch/arm/cpu/armv7/mx6/clock.c | 52 +-
> arch/arm/cpu/armv7/mx6/soc.c | 11 +-
> arch/arm/cpu/armv7/omap-common/boot-common.c | 31 +-
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 1 +
> arch/arm/cpu/armv7/omap-common/emif-common.c | 11 +-
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 61 +-
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 50 +-
> arch/arm/cpu/armv7/omap-common/reset.c | 4 +
> arch/arm/cpu/armv7/omap4/emif.c | 4 +-
> arch/arm/cpu/armv7/omap4/hw_data.c | 2 +-
> arch/arm/cpu/armv7/omap4/hwinit.c | 3 +-
> arch/arm/cpu/armv7/omap5/emif.c | 4 +-
> arch/arm/cpu/armv7/omap5/hw_data.c | 5 +-
> arch/arm/cpu/armv7/omap5/hwinit.c | 22 +-
> arch/arm/cpu/armv7/omap5/prcm-regs.c | 2 +
> arch/arm/cpu/armv7/start.S | 78 --
> arch/arm/cpu/armv7/zynq/slcr.c | 61 +
> arch/arm/cpu/armv7/zynq/timer.c | 49 +-
> arch/arm/cpu/ixp/config.mk | 4 -
> arch/arm/cpu/ixp/start.S | 77 --
> arch/arm/cpu/pxa/pxa2xx.c | 2 +-
> arch/arm/cpu/pxa/start.S | 96 +-
> arch/arm/cpu/s3c44b0/start.S | 77 --
> arch/arm/cpu/sa1100/start.S | 77 --
> arch/arm/cpu/tegra-common/ap.c | 2 +
> arch/arm/cpu/tegra-common/clock.c | 10 +-
> arch/arm/imx-common/Makefile | 22 +-
> arch/arm/imx-common/iomux-v3.c | 18 +-
> arch/arm/imx-common/misc.c | 84 ++
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 17 +
> arch/arm/include/asm/arch-am33xx/hardware_ti814x.h | 1 +
> arch/arm/include/asm/arch-am33xx/omap.h | 25 -
> arch/arm/include/asm/arch-at91/at91_common.h | 1 +
> arch/arm/include/asm/arch-at91/at91_dbu.h | 4 +
> arch/arm/include/asm/arch-at91/at91_pmc.h | 23 +
> arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 +-
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 19 +-
> arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h | 17 +-
> arch/arm/include/asm/arch-at91/clk.h | 1 +
> arch/arm/include/asm/arch-at91/hardware.h | 4 +-
> arch/arm/include/asm/arch-at91/sama5d3.h | 212 ++++
> arch/arm/include/asm/arch-at91/sama5d3_smc.h | 79 ++
> arch/arm/include/asm/arch-davinci/hardware.h | 2 +
> arch/arm/include/asm/arch-davinci/nand_defs.h | 9 +
> arch/arm/include/asm/arch-mx25/imx-regs.h | 21 +-
> arch/arm/include/asm/arch-mx25/imx25-pinmux.h | 421 -------
> arch/arm/include/asm/arch-mx25/iomux-mx25.h | 545 +++++++++
> arch/arm/include/asm/arch-mx27/imx-regs.h | 3 +-
> arch/arm/include/asm/arch-mx31/imx-regs.h | 22 +-
> arch/arm/include/asm/arch-mx35/imx-regs.h | 19 +-
> arch/arm/include/asm/arch-mx35/iomux-mx35.h | 1276
> ++++++++++++++++++++
> arch/arm/include/asm/arch-mx35/iomux.h | 295 -----
> arch/arm/include/asm/arch-mx35/mx35_pins.h | 353 ------
> arch/arm/include/asm/arch-mx5/clock.h | 1 +
> arch/arm/include/asm/arch-mx5/imx-regs.h | 24 +-
> arch/arm/include/asm/arch-mx5/iomux-mx51.h | 180 ++-
> arch/arm/include/asm/arch-mx5/iomux-mx53.h | 1232
> +++++++++++++++++++ arch/arm/include/asm/arch-mx5/iomux.h
> | 91 -- arch/arm/include/asm/arch-mx5/mx5x_pins.h | 879
> -------------- arch/arm/include/asm/arch-mx5/spl.h |
> 19 + arch/arm/include/asm/arch-mx6/clock.h | 1 +
> arch/arm/include/asm/arch-mx6/crm_regs.h | 183 +--
> arch/arm/include/asm/arch-mx6/imx-regs.h | 96 +-
> arch/arm/include/asm/arch-mx6/mx6-pins.h | 4 +
> arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 35 +-
> arch/arm/include/asm/arch-mx6/mx6q_pins.h | 27 -
> arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 25 +
> arch/arm/include/asm/arch-mx6/sys_proto.h | 10 +
> arch/arm/include/asm/arch-mxs/clock.h | 1 +
> arch/arm/include/asm/arch-mxs/imx-regs.h | 6 +-
> arch/arm/include/asm/arch-mxs/iomux.h | 4 +
> arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-digctl.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-i2c.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-lcdif.h | 38 +-
> arch/arm/include/asm/arch-mxs/regs-lradc.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-ocotp.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-pinctrl.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-power-mx23.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-power-mx28.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-rtc.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-ssp.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-timrot.h | 2 +-
> arch/arm/include/asm/arch-omap4/omap.h | 36 -
> arch/arm/include/asm/arch-omap4/sys_proto.h | 12 +-
> arch/arm/include/asm/arch-omap5/clocks.h | 10 +
> arch/arm/include/asm/arch-omap5/cpu.h | 2 +
> arch/arm/include/asm/arch-omap5/i2c.h | 2 +-
> arch/arm/include/asm/arch-omap5/omap.h | 36 -
> arch/arm/include/asm/arch-omap5/sys_proto.h | 22 +-
> arch/arm/include/asm/arch-pxa/hardware.h | 11 -
> arch/arm/include/asm/arch-tegra/tegra.h | 2 +
> arch/arm/include/asm/arch-zynq/hardware.h | 36 +-
> arch/arm/include/asm/arch-zynq/sys_proto.h | 7 +
> arch/arm/include/asm/global_data.h | 8
> + .../arm/include/asm/{arch-mxs => imx-common}/dma.h | 12 +
> arch/arm/include/asm/imx-common/imximage.cfg | 30 +
> arch/arm/include/asm/imx-common/iomux-v3.h | 69
> +- .../asm/{arch-mxs => imx-common}/regs-apbh.h | 19
> +- .../asm/{arch-mxs => imx-common}/regs-bch.h | 12
> +- .../asm/{arch-mxs => imx-common}/regs-common.h |
> 0 .../asm/{arch-mxs => imx-common}/regs-gpmi.h | 2 +-
> arch/arm/include/asm/omap_boot.h | 50 +
> arch/arm/include/asm/omap_common.h | 20 +
> arch/arm/lib/Makefile | 1 +
> arch/arm/lib/relocate.S | 112 ++
> arch/powerpc/cpu/mpc512x/Makefile | 1 -
> arch/powerpc/cpu/mpc512x/cpu_init.c | 2 +-
> arch/powerpc/cpu/mpc512x/iim.c | 394 ------
> arch/powerpc/include/asm/immap_512x.h | 2 +
> board/CarMediaLab/flea3/flea3.c | 91 +-
> board/Seagate/goflexhome/Makefile | 51 +
> board/Seagate/goflexhome/goflexhome.c | 189 +++
> board/Seagate/goflexhome/kwbimage.cfg | 168 +++
> board/armltd/vexpress/Makefile | 2
> +- .../vexpress/{ca9x4_ct_vxp.c => vexpress_common.c} | 35 +-
> board/atmel/at91sam9260ek/at91sam9260ek.c | 22 +-
> board/atmel/at91sam9n12ek/Makefile | 52 +
> board/atmel/at91sam9n12ek/at91sam9n12ek.c | 228 ++++
> board/atmel/sama5d3xek/Makefile | 51 +
> board/atmel/sama5d3xek/sama5d3xek.c | 275 +++++
> board/boundary/nitrogen6x/clocks.cfg | 11 +
> board/boundary/nitrogen6x/nitrogen6x.c | 42 +-
> board/{ => compulab}/cm_t35/Makefile | 12 +-
> board/{ => compulab}/cm_t35/cm_t35.c | 26 +-
> board/{ => compulab}/cm_t35/display.c | 2 +-
> board/{ => compulab}/cm_t35/eeprom.c | 0 board/{ =>
> compulab}/cm_t35/eeprom.h | 0 board/{ =>
> compulab}/cm_t35/leds.c | 3 +-
> board/denx/m53evk/Makefile | 40 +
> board/denx/m53evk/imximage.cfg | 108 ++
> board/denx/m53evk/m53evk.c | 328 +++++
> board/esg/ima3-mx53/ima3-mx53.c | 228 ++--
> board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 11 +
> board/freescale/mx23evk/spl_boot.c | 4 +-
> board/freescale/mx25pdk/mx25pdk.c | 132 +-
> board/freescale/mx31pdk/mx31pdk.c | 16 +-
> board/freescale/mx35pdk/mx35pdk.c | 175 ++-
> board/freescale/mx51evk/mx51evk.c | 348 ++----
> board/freescale/mx51evk/mx51evk_video.c | 22 +-
> board/freescale/mx53ard/mx53ard.c | 329 +++--
> board/freescale/mx53evk/mx53evk.c | 289 ++---
> board/freescale/mx53loco/mx53loco.c | 268 ++--
> board/freescale/mx53loco/mx53loco_video.c | 68 +-
> board/freescale/mx53smd/mx53smd.c | 152 +--
> board/freescale/mx6qarm2/mx6qarm2.c | 17 +-
> board/freescale/mx6qsabreauto/mx6qsabreauto.c | 22 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 30 +-
> board/freescale/mx6qsabresd/mx6qsabresd.c | 30 +-
> board/freescale/mx6slevk/Makefile | 28 +
> board/freescale/mx6slevk/imximage.cfg | 118 ++
> board/freescale/mx6slevk/mx6slevk.c | 102 ++
> board/freescale/titanium/Makefile | 36 +
> board/freescale/titanium/imximage.cfg | 178 +++
> board/freescale/titanium/titanium.c | 334 +++++
> board/genesi/mx51_efikamx/efikamx-usb.c | 122 +-
> board/genesi/mx51_efikamx/efikamx.c | 2 +-
> board/h2200/h2200.c | 9 +
> board/isee/igep0033/Makefile | 46 +
> board/isee/igep0033/board.c | 232 ++++
> board/isee/igep0033/board.h | 27 +
> board/isee/igep0033/mux.c | 89 ++
> board/karo/tx25/tx25.c | 123 +-
> board/nokia/rx51/rx51.c | 52 +-
> board/nvidia/beaver/Makefile | 38 +
> board/olimex/mx23_olinuxino/spl_boot.c | 4 +-
> board/pandora/pandora.c | 3 +-
> board/syteco/zmx25/zmx25.c | 143 +--
> board/ti/beagle/beagle.c | 5 +-
> board/ti/dra7xx/evm.c | 2 +-
> board/ti/omap5_uevm/evm.c | 6 +-
> board/ti/panda/panda.c | 6 +
> board/ti/ti814x/evm.c | 75 ++
> board/ti/ti814x/evm.h | 1 +
> board/ti/ti814x/mux.c | 35 +
> board/ttcontrol/vision2/vision2.c | 585 ++++-----
> board/wandboard/wandboard.c | 113 +-
> board/woodburn/woodburn.c | 69 +-
> board/xilinx/zynq/board.c | 66 +-
> boards.cfg | 20 +-
> common/Makefile | 1 +
> common/cmd_fpga.c | 250 ++--
> common/cmd_fuse.c | 168 +++
> common/spl/spl.c | 10 +-
> doc/README.at91 | 84 +-
> doc/README.fsl_iim | 48 +
> doc/README.fuse | 67 +
> doc/README.imx25 | 10 +
> doc/README.imx27 | 10 +
> doc/README.imx5 | 6 +
> doc/README.imx6 | 10 +
> doc/README.imximage | 18 +
> doc/README.mxc_ocotp | 50 +
> doc/README.omap-reset-time | 20 +
> drivers/dma/apbh_dma.c | 5 +-
> drivers/fpga/Makefile | 1 +
> drivers/fpga/fpga.c | 225 ++--
> drivers/fpga/xilinx.c | 146 +++
> drivers/fpga/zynqpl.c | 355 ++++++
> drivers/i2c/Makefile | 1 +
> drivers/i2c/zynq_i2c.c | 306 +++++
> drivers/misc/Makefile | 2 +
> drivers/misc/fsl_iim.c | 286 +++++
> drivers/misc/mxc_ocotp.c | 216 ++++
> drivers/misc/twl4030_led.c | 4 +-
> drivers/mmc/Makefile | 1 +
> drivers/mmc/gen_atmel_mci.c | 47 +-
> drivers/mmc/mxsmmc.c | 2 +-
> drivers/mmc/omap_hsmmc.c | 8 +-
> drivers/mmc/zynq_sdhci.c | 40 +
> drivers/mtd/nand/Makefile | 2 +
> drivers/mtd/nand/docg4.c | 1028
> ++++++++++++++++ drivers/mtd/nand/docg4_spl.c |
> 222 ++++ drivers/mtd/nand/mxc_nand_spl.c | 13 +-
> drivers/mtd/nand/mxs_nand.c | 15 +-
> drivers/net/cpsw.c | 6 +
> drivers/net/phy/Makefile | 1 +
> drivers/net/phy/et1011c.c | 110 ++
> drivers/net/phy/marvell.c | 11 +
> drivers/net/phy/phy.c | 3 +
> drivers/net/zynq_gem.c | 199 ++-
> drivers/power/Makefile | 2 +-
> drivers/power/{twl6035.c => palmas.c} | 34 +-
> drivers/power/twl4030.c | 16 +-
> drivers/power/twl6030.c | 75 +-
> drivers/spi/atmel_spi.c | 15 +-
> drivers/spi/atmel_spi.h | 2 +-
> drivers/spi/mxs_spi.c | 2 +-
> drivers/usb/gadget/pxa27x_udc.c | 4 +-
> drivers/usb/host/ehci-mx5.c | 73 --
> drivers/usb/host/ohci-at91.c | 14 +-
> drivers/usb/phy/twl4030.c | 48 +-
> drivers/video/Makefile | 1 +
> drivers/video/cfb_console.c | 4 +
> drivers/video/mxsfb.c | 189 +++
> drivers/video/pxa_lcd.c | 34 +-
> include/altera.h | 17 -
> include/atmel_mci.h | 2 +
> include/config_cmd_all.h | 1 +
> include/configs/M54455EVB.h | 2 +-
> include/configs/MERGERBOX.h | 2 +-
> include/configs/MVBC_P.h | 2 +-
> include/configs/MVBLM7.h | 2 +-
> include/configs/MVSMR.h | 2 +-
> include/configs/ac14xx.h | 5 +
> include/configs/am335x_evm.h | 14 +-
> include/configs/aria.h | 2 +-
> include/configs/at91sam9260ek.h | 52 +-
> include/configs/at91sam9n12ek.h | 232 ++++
> include/configs/cm_t35.h | 18 +-
> include/configs/da830evm.h | 4 +-
> include/configs/da850evm.h | 4 +-
> include/configs/enbw_cmc.h | 4 +-
> include/configs/goflexhome.h | 151 +++
> include/configs/igep0033.h | 288 +++++
> include/configs/ima3-mx53.h | 3 -
> include/configs/m28evk.h | 19 +
> include/configs/m53evk.h | 256 ++++
> include/configs/mecp5123.h | 2 +-
> include/configs/mpc5121ads.h | 2 +-
> include/configs/mx28evk.h | 1 +
> include/configs/mx51evk.h | 51 +-
> include/configs/mx53ard.h | 102 +-
> include/configs/mx53evk.h | 1 +
> include/configs/mx53smd.h | 1 +
> include/configs/mx6_common.h | 1 +
> include/configs/mx6qsabre_common.h | 14 +
> include/configs/mx6qsabrelite.h | 5 +
> include/configs/mx6slevk.h | 189 +++
> include/configs/nitrogen6x.h | 5 +
> include/configs/omap3_mvblx.h | 2 +-
> include/configs/omap4_common.h | 8 +-
> include/configs/omap4_panda.h | 2 +
> include/configs/omap5_common.h | 5 +
> include/configs/omap5_uevm.h | 3 +-
> include/configs/pcm051.h | 8 +-
> include/configs/pdm360ng.h | 7 +
> include/configs/sama5d3xek.h | 245 ++++
> include/configs/tegra-common-post.h | 2 +
> include/configs/tegra114-common.h | 2 -
> include/configs/tegra20-common.h | 2 -
> include/configs/tegra30-common.h | 2 -
> include/configs/ti814x_evm.h | 25 +
> include/configs/titanium.h | 277 +++++
> include/configs/tnetv107x_evm.h | 4 +-
> include/configs/vexpress_ca15_tc2.h | 36 +
> include/configs/vexpress_ca5x2.h | 34
> + .../configs/vexpress_ca9x4.h | 22
> +- .../configs/{ca9x4_ct_vxp.h => vexpress_common.h} | 157 ++-
> include/configs/wandboard.h | 24 +-
> include/configs/zynq.h | 39 +-
> include/fpga.h | 13 +-
> include/fuse.h | 44 +
> include/lattice.h | 3 -
> include/linux/bitrev.h | 23 +
> include/linux/mtd/docg4.h | 134 ++
> include/netdev.h | 2 +-
> include/{twl6035.h => palmas.h} | 28 +-
> include/phy.h | 1 +
> include/spl.h | 1 -
> include/twl4030.h | 4 +-
> include/twl6030.h | 16 +
> include/usb/ehci-fsl.h | 6 -
> include/xilinx.h | 25 +-
> include/zynqpl.h | 59 +
> lib/Makefile | 1 +
> lib/bitrev.c | 59 +
> spl/Makefile | 8 +
> tools/imximage.c | 17 +-
> tools/imximage.h | 9 +-
> tools/mxsboot.c | 8 +- 353 files
> changed, 16980 insertions(+), 7344 deletions(-) delete mode 100644
> arch/arm/cpu/arm1136/mx35/iomux.c create mode 100644
> arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c create mode 100644
> arch/arm/cpu/armv7/at91/Makefile create mode 100644
> arch/arm/cpu/armv7/at91/clock.c create mode 100644
> arch/arm/cpu/armv7/at91/cpu.c create mode 100644
> arch/arm/cpu/armv7/at91/reset.c create mode 100644
> arch/arm/cpu/armv7/at91/sama5d3_devices.c create mode 100644
> arch/arm/cpu/armv7/at91/timer.c delete mode 100644
> arch/arm/cpu/armv7/mx5/iomux.c create mode 100644
> arch/arm/imx-common/misc.c create mode 100644
> arch/arm/include/asm/arch-at91/sama5d3.h create mode 100644
> arch/arm/include/asm/arch-at91/sama5d3_smc.h delete mode 100644
> arch/arm/include/asm/arch-mx25/imx25-pinmux.h create mode 100644
> arch/arm/include/asm/arch-mx25/iomux-mx25.h create mode 100644
> arch/arm/include/asm/arch-mx35/iomux-mx35.h delete mode 100644
> arch/arm/include/asm/arch-mx35/iomux.h delete mode 100644
> arch/arm/include/asm/arch-mx35/mx35_pins.h create mode 100644
> arch/arm/include/asm/arch-mx5/iomux-mx53.h delete mode 100644
> arch/arm/include/asm/arch-mx5/iomux.h delete mode 100644
> arch/arm/include/asm/arch-mx5/mx5x_pins.h create mode 100644
> arch/arm/include/asm/arch-mx5/spl.h create mode 100644
> arch/arm/include/asm/arch-mx6/mx6sl_pins.h rename
> arch/arm/include/asm/{arch-mxs => imx-common}/dma.h (93%) create mode
> 100644 arch/arm/include/asm/imx-common/imximage.cfg rename
> arch/arm/include/asm/{arch-mxs => imx-common}/regs-apbh.h (97%) rename
> arch/arm/include/asm/{arch-mxs => imx-common}/regs-bch.h (96%) rename
> arch/arm/include/asm/{arch-mxs => imx-common}/regs-common.h (100%)
> rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-gpmi.h (99%)
> create mode 100644 arch/arm/include/asm/omap_boot.h create mode 100644
> arch/arm/lib/relocate.S delete mode 100644
> arch/powerpc/cpu/mpc512x/iim.c create mode 100644
> board/Seagate/goflexhome/Makefile create mode 100644
> board/Seagate/goflexhome/goflexhome.c create mode 100644
> board/Seagate/goflexhome/kwbimage.cfg rename
> board/armltd/vexpress/{ca9x4_ct_vxp.c => vexpress_common.c} (89%)
> create mode 100644 board/atmel/at91sam9n12ek/Makefile create mode
> 100644 board/atmel/at91sam9n12ek/at91sam9n12ek.c create mode 100644
> board/atmel/sama5d3xek/Makefile create mode 100644
> board/atmel/sama5d3xek/sama5d3xek.c rename board/{ =>
> compulab}/cm_t35/Makefile (82%) rename board/{ =>
> compulab}/cm_t35/cm_t35.c (96%) rename board/{ =>
> compulab}/cm_t35/display.c (99%) rename board/{ =>
> compulab}/cm_t35/eeprom.c (100%) rename board/{ =>
> compulab}/cm_t35/eeprom.h (100%) rename board/{ =>
> compulab}/cm_t35/leds.c (95%) create mode 100644
> board/denx/m53evk/Makefile create mode 100644
> board/denx/m53evk/imximage.cfg create mode 100644
> board/denx/m53evk/m53evk.c create mode 100644
> board/freescale/mx6slevk/Makefile create mode 100644
> board/freescale/mx6slevk/imximage.cfg create mode 100644
> board/freescale/mx6slevk/mx6slevk.c create mode 100644
> board/freescale/titanium/Makefile create mode 100644
> board/freescale/titanium/imximage.cfg create mode 100644
> board/freescale/titanium/titanium.c create mode 100644
> board/isee/igep0033/Makefile create mode 100644
> board/isee/igep0033/board.c create mode 100644
> board/isee/igep0033/board.h create mode 100644
> board/isee/igep0033/mux.c create mode 100644
> board/nvidia/beaver/Makefile create mode 100644 common/cmd_fuse.c
> create mode 100644 doc/README.fsl_iim
> create mode 100644 doc/README.fuse
> create mode 100644 doc/README.imx25
> create mode 100644 doc/README.imx27
> create mode 100644 doc/README.imx6
> create mode 100644 doc/README.mxc_ocotp
> create mode 100644 doc/README.omap-reset-time
> create mode 100644 drivers/fpga/zynqpl.c
> create mode 100644 drivers/i2c/zynq_i2c.c
> create mode 100644 drivers/misc/fsl_iim.c
> create mode 100644 drivers/misc/mxc_ocotp.c
> create mode 100644 drivers/mmc/zynq_sdhci.c
> create mode 100644 drivers/mtd/nand/docg4.c
> create mode 100644 drivers/mtd/nand/docg4_spl.c
> create mode 100644 drivers/net/phy/et1011c.c
> rename drivers/power/{twl6035.c => palmas.c} (61%)
> create mode 100644 drivers/video/mxsfb.c
> create mode 100644 include/configs/at91sam9n12ek.h
> create mode 100644 include/configs/goflexhome.h
> create mode 100644 include/configs/igep0033.h
> create mode 100644 include/configs/m53evk.h
> create mode 100644 include/configs/mx6slevk.h
> create mode 100644 include/configs/sama5d3xek.h
> create mode 100644 include/configs/titanium.h
> create mode 100644 include/configs/vexpress_ca15_tc2.h
> create mode 100644 include/configs/vexpress_ca5x2.h
> rename arch/arm/include/asm/arch-mx25/sys_proto.h =>
> include/configs/vexpress_ca9x4.h (61%) rename
> include/configs/{ca9x4_ct_vxp.h => vexpress_common.h} (56%) create
> mode 100644 include/fuse.h create mode 100644 include/linux/bitrev.h
> create mode 100644 include/linux/mtd/docg4.h
> rename include/{twl6035.h => palmas.h} (68%)
> create mode 100644 include/zynqpl.h
> create mode 100644 lib/bitrev.c
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130531/2f141d22/attachment.pgp>
next prev parent reply other threads:[~2013-05-31 20:51 UTC|newest]
Thread overview: 259+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-30 19:29 [U-Boot] Pull request: u-boot-arm/master Albert ARIBAUD
2013-05-31 20:51 ` Tom Rini [this message]
-- strict thread matches above, loose matches on Subject: below --
2016-01-31 20:40 Albert ARIBAUD
2016-02-01 16:54 ` Tom Rini
2015-11-10 17:45 Albert ARIBAUD
2015-11-10 20:15 ` Tom Rini
2015-10-15 21:19 Albert ARIBAUD
2015-10-15 22:00 ` Tom Rini
2015-07-31 1:06 Albert ARIBAUD
2015-08-01 14:47 ` Tom Rini
2015-07-06 15:20 Albert ARIBAUD
2015-07-06 21:15 ` Tom Rini
2015-07-06 22:09 ` Albert ARIBAUD
2015-07-06 23:59 ` Tom Rini
2015-07-07 5:49 ` Albert ARIBAUD
2015-07-07 10:01 ` Albert ARIBAUD
2015-07-02 21:27 Albert ARIBAUD
2015-07-02 22:55 ` Tom Rini
2015-07-05 14:11 ` Albert ARIBAUD
2015-05-05 9:30 Albert ARIBAUD
2015-05-05 23:59 ` Tom Rini
2015-01-04 18:11 Albert ARIBAUD
2015-01-05 15:10 ` Tom Rini
2014-11-24 17:30 Albert ARIBAUD
2014-11-24 22:13 ` Tom Rini
2014-11-13 7:54 Albert ARIBAUD
2014-11-08 0:07 Albert ARIBAUD
2014-11-10 21:28 ` Tom Rini
2014-10-11 0:38 Albert ARIBAUD
2014-10-11 11:49 ` Tom Rini
2014-10-07 11:16 Albert ARIBAUD
2014-10-07 16:02 ` Tom Rini
2014-09-17 21:40 Albert ARIBAUD
2014-09-18 1:00 ` Tom Rini
2014-09-12 13:42 Albert ARIBAUD
2014-09-12 19:15 ` Tom Rini
2014-07-29 13:08 Albert ARIBAUD
2014-07-29 14:30 ` Tom Rini
2014-07-05 8:18 Albert ARIBAUD
2014-07-05 16:48 ` Tom Rini
2014-07-04 22:57 Albert ARIBAUD
2014-07-05 0:20 ` Tom Rini
2014-07-02 20:33 Albert ARIBAUD
2014-07-02 22:38 ` Tom Rini
2014-06-08 7:51 Albert ARIBAUD
2014-06-09 2:25 ` Tom Rini
2014-05-30 15:20 Albert ARIBAUD
2014-05-30 17:59 ` Tom Rini
2014-05-24 9:32 Albert ARIBAUD
2014-05-24 20:37 ` Tom Rini
2014-05-20 8:57 Albert ARIBAUD
2014-05-22 19:12 ` Tom Rini
2014-05-09 9:56 Albert ARIBAUD
2014-05-09 16:15 ` Tom Rini
2014-04-08 11:40 Albert ARIBAUD
2014-04-08 16:39 ` Tom Rini
2014-03-10 18:16 Albert ARIBAUD
2014-03-10 21:27 ` Tom Rini
2014-02-26 21:40 Albert ARIBAUD
2014-02-26 23:39 ` Tom Rini
2014-02-13 17:43 Albert ARIBAUD
2014-02-18 17:50 ` Tom Rini
2014-02-18 18:21 ` Stephen Warren
2014-02-18 18:29 ` Tom Rini
2014-02-18 18:47 ` Albert ARIBAUD
2014-01-15 15:16 Albert ARIBAUD
2014-01-14 13:04 Albert ARIBAUD
2014-01-14 21:02 ` Tom Rini
2014-01-13 18:49 Albert ARIBAUD
2014-01-13 19:42 ` Tom Rini
2014-01-10 15:43 Albert ARIBAUD
2014-01-10 20:03 ` Tom Rini
2014-01-11 8:11 ` Albert ARIBAUD
2013-12-10 22:05 Albert ARIBAUD
2013-12-11 16:44 ` Tom Rini
2013-11-09 22:53 Albert ARIBAUD
2013-11-11 19:13 ` Tom Rini
2013-10-11 14:33 Albert ARIBAUD
2013-10-14 15:20 ` Tom Rini
2013-10-07 20:02 Albert ARIBAUD
2013-10-08 19:33 ` Tom Rini
2013-10-03 20:42 Albert ARIBAUD
2013-10-04 18:46 ` Tom Rini
2013-10-02 15:34 Albert ARIBAUD
2013-10-02 18:20 ` Tom Rini
2013-09-12 13:18 Albert ARIBAUD
2013-09-12 15:11 ` Tom Rini
2013-09-12 20:54 ` Albert ARIBAUD
2013-09-06 22:55 Albert ARIBAUD
2013-09-09 14:56 ` Tom Rini
2013-07-10 20:33 [U-Boot] pull " Albert ARIBAUD
2013-06-21 21:52 [U-Boot] Pull " Albert ARIBAUD
2013-06-24 20:17 ` Tom Rini
2013-06-13 15:49 Albert ARIBAUD
2013-06-14 15:11 ` Tom Rini
2013-06-05 15:02 [U-Boot] pull " Albert ARIBAUD
2013-06-07 18:20 ` Tom Rini
2013-04-17 16:37 [U-Boot] Pull " Albert ARIBAUD
2013-04-18 20:17 ` Tom Rini
2013-04-15 19:36 Albert ARIBAUD
2013-04-16 15:58 ` Tom Rini
2013-04-14 19:32 Albert ARIBAUD
2013-04-15 15:51 ` Tom Rini
2013-04-10 23:12 Albert ARIBAUD
2013-04-10 23:20 ` Benoît Thébaudeau
2013-04-11 6:10 ` Albert ARIBAUD
2013-03-28 20:06 Albert ARIBAUD
2013-03-29 0:01 ` Tom Rini
2013-03-15 22:01 Albert ARIBAUD
2013-03-16 8:19 ` Albert ARIBAUD
2013-03-17 19:40 ` Tom Rini
2013-03-18 17:06 ` Tom Rini
2013-03-18 17:43 ` Albert ARIBAUD
2013-03-18 18:38 ` Tom Rini
2013-02-12 14:25 Albert ARIBAUD
2013-02-15 16:33 ` Tom Rini
2013-01-14 16:58 Albert ARIBAUD
2013-01-14 23:18 ` Tom Rini
2013-01-11 21:36 Albert ARIBAUD
2013-01-11 23:44 ` Tom Rini
2013-01-09 14:43 Albert ARIBAUD
2013-01-09 19:35 ` Tom Rini
2013-01-08 15:07 Albert ARIBAUD
2013-01-08 20:50 ` Simon Glass
2013-01-08 21:01 ` Albert ARIBAUD
2013-01-08 21:06 ` Simon Glass
2013-01-08 22:34 ` Tom Rini
2012-12-22 12:11 Albert ARIBAUD
2012-12-22 15:20 ` Tom Rini
2013-01-03 6:41 ` Joonyoung Shim
2013-01-03 7:12 ` Lukasz Majewski
2012-11-04 21:51 Albert ARIBAUD
2012-11-05 16:54 ` Tom Rini
2012-11-05 19:45 ` Stephen Warren
2012-11-08 15:08 ` Tom Rini
2012-10-26 22:30 Albert ARIBAUD
2012-10-27 0:20 ` Tom Rini
2012-10-19 23:55 Albert ARIBAUD
2012-10-20 17:39 ` Tom Rini
2012-10-05 19:26 Albert ARIBAUD
2012-10-05 22:26 ` Tom Rini
2012-10-04 16:57 Albert ARIBAUD
2012-10-04 18:31 ` Tom Rini
2012-09-21 21:35 Albert ARIBAUD
2012-09-22 0:21 ` Tom Rini
2012-09-01 16:37 Albert ARIBAUD
2012-09-01 22:27 ` Wolfgang Denk
2012-07-10 6:30 Albert ARIBAUD
2012-07-10 7:04 ` Wolfgang Denk
2012-07-07 12:12 Albert ARIBAUD
2012-07-08 20:13 ` Wolfgang Denk
2012-05-15 6:57 Albert ARIBAUD
2012-05-20 20:33 ` Wolfgang Denk
2012-04-16 14:52 Albert ARIBAUD
2012-04-16 18:18 ` Marek Vasut
2012-04-16 20:09 ` Albert ARIBAUD
2012-04-16 20:15 ` Albert ARIBAUD
2012-04-17 5:33 ` Stefano Babic
2012-03-30 7:10 Albert ARIBAUD
2012-03-30 17:58 ` Wolfgang Denk
2012-02-27 20:23 Albert ARIBAUD
2012-03-03 14:09 ` Wolfgang Denk
2012-02-12 9:16 Albert ARIBAUD
2012-02-12 21:06 ` Wolfgang Denk
2012-01-16 8:16 Albert ARIBAUD
2012-01-17 21:36 ` Wolfgang Denk
2011-12-24 9:27 Albert ARIBAUD
2012-01-05 15:53 ` Wolfgang Denk
2011-12-19 16:55 Albert ARIBAUD
2011-12-20 21:40 ` Wolfgang Denk
2011-12-11 13:38 Albert ARIBAUD
2011-12-12 6:58 ` Wolfgang Denk
2011-12-09 16:42 Albert ARIBAUD
2011-12-10 21:54 ` Wolfgang Denk
2011-12-06 23:17 Albert ARIBAUD
2011-12-07 10:16 ` Wolfgang Denk
2011-11-15 21:28 Albert ARIBAUD
2011-11-16 0:04 ` Simon Glass
2011-11-16 2:27 ` Marek Vasut
2011-11-16 3:45 ` Simon Glass
2011-11-16 3:53 ` Mike Frysinger
2011-11-16 4:05 ` Simon Glass
2011-11-16 19:24 ` Wolfgang Denk
2011-11-17 13:45 ` Albert ARIBAUD
2011-11-17 21:39 ` Mike Frysinger
2011-11-17 21:56 ` Wolfgang Denk
2011-11-17 22:03 ` Albert ARIBAUD
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF1740D74CB5@HQMAIL01.nvidia.com>
[not found] ` <7E91C59574E9954FA075F8D8CCDF78DB38FE7FF7A9@HQMAIL04.nvidia.com>
2011-11-17 22:04 ` Simon Glass
2011-11-16 6:28 ` Heiko Schocher
2011-11-16 19:42 ` Wolfgang Denk
2011-11-07 20:58 Albert ARIBAUD
2011-11-08 0:02 ` Wolfgang Denk
2011-09-30 20:09 Albert ARIBAUD
2011-10-01 19:40 ` Wolfgang Denk
2011-10-04 5:35 ` Simon Glass
2011-10-21 18:44 ` Albert ARIBAUD
2011-10-21 19:12 ` Simon Glass
2011-09-28 6:38 Albert ARIBAUD
2011-09-28 18:42 ` Wolfgang Denk
2011-09-22 21:03 Albert ARIBAUD
2011-09-23 6:29 ` Wolfgang Denk
2011-09-14 6:57 Albert ARIBAUD
2011-09-15 12:24 ` Wolfgang Denk
2011-08-31 10:13 Albert ARIBAUD
2011-08-31 11:57 ` Marek Vasut
2011-09-01 8:59 ` Aneesh V
2011-09-03 19:26 ` Albert ARIBAUD
2011-09-04 8:44 ` Aneesh V
2011-09-04 9:01 ` Albert ARIBAUD
2011-09-04 9:02 ` Aneesh V
2011-09-04 9:12 ` Albert ARIBAUD
2011-09-04 9:17 ` Aneesh V
2011-08-04 12:28 Albert ARIBAUD
2011-07-18 13:38 Albert ARIBAUD
2011-07-18 14:31 ` Igor Grinberg
2011-07-18 17:52 ` Albert ARIBAUD
2011-08-12 8:21 ` Albert ARIBAUD
2011-07-18 19:17 ` Wolfgang Denk
2011-07-04 9:08 Albert ARIBAUD
2011-07-04 22:32 ` Wolfgang Denk
2011-06-30 6:24 Albert ARIBAUD
2011-06-30 11:15 ` Albert ARIBAUD
2011-06-28 5:39 Albert ARIBAUD
2011-06-28 9:52 ` Igor Grinberg
2011-06-28 10:20 ` Igor Grinberg
2011-06-28 21:19 ` Albert ARIBAUD
2011-06-28 10:48 ` Wolfgang Denk
2011-06-29 6:09 ` Albert ARIBAUD
2011-06-29 21:09 ` Wolfgang Denk
2011-06-21 20:28 Albert ARIBAUD
2011-06-22 9:17 ` Wolfgang Denk
2011-06-22 12:18 ` Wolfgang Denk
2011-06-22 13:51 ` Albert ARIBAUD
2011-06-08 20:41 Albert ARIBAUD
2011-06-08 21:32 ` Wolfgang Denk
2011-05-31 20:31 Albert ARIBAUD
2011-05-31 22:29 ` John Rigby
2011-06-01 17:15 ` Albert ARIBAUD
2011-06-01 20:15 ` Wolfgang Denk
2011-05-11 21:07 Albert ARIBAUD
2011-05-11 22:11 ` Rogan Dawes
2011-05-12 5:41 ` Albert ARIBAUD
2011-05-12 8:48 ` Prafulla Wadaskar
2011-05-12 9:06 ` Simon Guinot
2011-05-12 9:12 ` Simon Guinot
2011-05-12 17:27 ` Wolfgang Denk
2011-05-14 18:38 ` Dirk Behme
2011-04-28 16:14 Albert ARIBAUD
2011-04-28 21:17 ` Wolfgang Denk
2011-04-27 17:40 Albert ARIBAUD
2011-04-27 20:16 ` Wolfgang Denk
2011-04-27 23:42 ` Macpaul Lin
2011-04-28 21:14 ` Wolfgang Denk
2011-04-29 1:31 ` Macpaul Lin
2011-04-30 20:44 ` Wolfgang Denk
2011-05-02 8:46 ` Macpaul Lin
2011-05-02 10:31 ` Wolfgang Denk
2011-03-27 17:25 Albert ARIBAUD
2011-03-27 19:32 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130531205159.GT11917@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.