From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-arm/master
Date: Tue, 20 May 2014 10:57:08 +0200 [thread overview]
Message-ID: <E1WmfrB-0000CW-1V@janus> (raw)
Hello Tom,
The following changes since commit
d7782d06534fe4fa47a49fa7c106de5ba85a9687:
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-05-16
18:30:33 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 05d134b084590684bcf4d832c0035952727b7cd9:
Merge remote-tracking branch 'u-boot/master' (2014-05-20 10:05:42
+0200)
Note: there still is a Zynq PR pending right now, but I wanted
to get re-synchronized with mainline first; a further PR with Zynq
and individual patches will arrive soon.
----------------------------------------------------------------
Akshay Saraswat (3):
Exynos5: config: Enable FIT
S5P: Exynos: Add GPIO pin numbering and rename definitions
S5P: Exynos: Config: Enable GPIO CMD config
Albert ARIBAUD (12):
arm1136: move cache code from start.S to cache.c
arm: move reset_cpu from start.S into cpu.c
arm: pxa: move SP check from start.S to cpuinfo.c
arm: remove unused _end_vect and _vectors_end symbols
arm: move exception handling out of start.S files
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge remote-tracking branch 'u-boot-sh/rmobile'
boards.cfg: reformat
Merge remote-tracking branch 'u-boot/master'
Ash Charles (1):
am335x: pepper: Add Gumstix Pepper AM335x-based machine
Belisko Marek (1):
mtd: nand: omap_gpmc: Fix update of read_ecc in oob
Christian Riesch (1):
arm, davinci: Use CONFIG_SPL_PAD_TO for padding the SPL in an ais
image
Dmitry Lifshitz (3):
ARM: OMAP5: add UART4 support
ARM: OMAP5: Power: add LDO2 support for Palmas driver
ARM: OMAP5: add CKO buffer control mask
Egli, Samuel (7):
siemens: cosmetic: remove unused and rename defines
siemens: update DDR3 parameters for dxr2
siemens: add led cmd for flexible LED control
siemens: change LED indication in DFU mode
siemens: cosmetic: rename project_dir
siemens:cosmetic, dxr2: rename dxr2 to draco
siemens, draco: add new target
Eric Benard (8):
imx-common: add board_video_skip
nitrogen6x: use common board_video_skip
mx6sabresd: use common board_video_skip
RiOTboard and MarSBoard: add new boards support
imx-common/video: add detect_hdmi
nitrogen6x: use common detect_hdmi
mx6sabresd: use common detect_hdmi
embest/mx6boards: use common detect_hdmi
Eric Nelson (1):
ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD
Fabio Estevam (11):
wandboard: Convert to generic board
mx53loco: Convert to generic board
mx6sabre_common: Convert to generic board
mx53ard: Convert to generic board
mx53smd: Convert to generic board
mx53evk: Convert to generic board
udoo: Convert to generic board
hummingboard: Convert to generic board
mx6slevk: Add SPI NOR flash support
nitrogen6x: Fix the PAD settings for the ECSPI chipselect
iomux-v3: Add support for mx6sl LVE bit
Inha Song (1):
samsung: misc: add env default option to lcd menu
Jaehoon Chung (1):
ARM: exynos: remove the unused code
Khoronzhuk, Ivan (1):
config: k2hk_evm: Add generic board support
Marek Vasut (1):
arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD
Mateusz Zalega (1):
ARM: Samsung: s5p_goni: maintainer update
Nobuhiro Iwamatsu (22):
arm: rmobile: Coordinate the common part of the header file of
r8a7790 and r8a7791 arm: rmobile: r8a779x: Fix L2 cache init and
latency setting arm: rmobile: koelsch: Change name of structure
arm: rmobile: koelsch: Remove NOR-Flash support
arm: rmobile: lager: Change name of the structure
arm: rmobile: lager: Remove NOR-Flash support
arm: rmobile: Merge functions to get the CPU information of
R8A7790 and R8A7791 arm: rmobile: Add 1 to value of the CPU revision in
rmobile_get_cpu_rev_integer() arm: rmobile: Add
rmobile_get_cpu_rev_fraction() for R-Car SoCs arm: rmobile: Add
prototype for function to get the CPU information to rmobile.h arm:
rmobile: Update print_cpuinfo function arm: rmobile: r8a7790: Add
support ES2 revision arm: rmobile: r8a7791: Add support ES2 revision
arm: rmobile: keolsch: Add support ES2 revision of R8A7791
arm: rmobile: lager: Update QoS initialization to version 0.955
arm: rmobile: koelsch: Update QoS initialization
arm: rmobile: koelsch: Update calculation of
CONFIG_SH_TMU_CLK_FREQ arm: rmobile: Add register infomation of PLL
regsiter arm: rmobile: koelsch: Change to maximum CPU frequency
arm: rmobile: lager: Update calculation of CONFIG_SH_TMU_CLK_FREQ
arm: rmobile: lager: Change to maximum CPU frequency
arm: rmobile: lager: Remove MACH_TYPE_LAGER and CONFIG_MACH_TYPE
Otavio Salvador (2):
wandboard: add Future Eletronics 7" WVGA LCD extension board
wandboard: Pass video kernel arguments for HDMI and LCD
Przemyslaw Marczak (4):
samsung: misc: allows using environmental macros as args in menu
commands samsung: misc: add gpt restore option to lcd menu
samsung: misc: menu: increase delay in menu main loop
samsung: misc: remove download mode info screen
Robert Nelson (2):
omap3_beagle: use omap3-beagle-xm-ab.dtb for the xM AB revision
omap3_beagle: xM A/B validate new dtb exits in file system
Stefano Babic (3):
mx6: fix weird formatting in imx6q-sabreauto.dts
Merge branch 'master' of git://git.denx.de/u-boot-arm
Merge branch 'master' of git://git.denx.de/u-boot-arm
Stephen Warren (10):
ARM: tegra: set CONFIG_SYS_MMC_MAX_DEVICE
ARM: tegra: fix CPU VDD comment in Tegra30 CPU init code
ARM: tegra: allow pinmux mux option not to be set by init tables
ARM: tegra: add GPIO initialization table function
ARM: tegra: add function to enable input clamping on tristate
ARM: tegra: make use of GPIO init table on Jetson TK1
ARM: tegra: clamp inputs on Jetson TK1
ARM: tegra: update Venice2 pinmux
ARM: tegra: Venice2 pinmux spreadsheet updates
ARM: tegra: use a CPU freq that all SKUs can support
Thomas Diener (2):
imx25: Add new hardware registers
video: Add support for imx25 lcd controller
Tim Harvey (10):
ventana: fixed comments in eeprom header
ventana: remove redundant include
power: make pfuze100 be able to coexist with other pmics
ventana: use non-generic pfuze100 init
power: Add support for LTC3676 PMIC
ventana: Add support for the LTC3676 PMIC
imx6: ventana: fix system-serial dt property
imx: ventana: Convert to generic board
imx: ventana: add HDMI and LVDS display capability
nand: remove CONFIG_SYS_NAND_PAGE_SIZE
Yegor Yefremov (1):
am33xx: add SSC enable macro
?ukasz Majewski (2):
trats2: config: fix: Set default console to ttySAC2
trats: config: fix: Set default console to ttySAC2
Makefile
| 2 +-
arch/arm/cpu/arm1136/start.S |
254 +-------------
arch/arm/cpu/arm1176/start.S |
198 +----------
arch/arm/cpu/arm720t/start.S |
229 +------------
arch/arm/cpu/arm720t/tegra-common/cpu.c |
10 +-
arch/arm/cpu/arm720t/tegra30/cpu.c |
23 +-
arch/arm/cpu/arm920t/ep93xx/u-boot.lds
| 3 +-
arch/arm/cpu/arm920t/start.S |
216 +-----------
arch/arm/cpu/arm926ejs/mxs/start.S |
92 +-----
arch/arm/cpu/arm926ejs/spear/start.S |
27 +-
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
| 1 +
arch/arm/cpu/arm926ejs/start.S |
262 +--------------
arch/arm/cpu/arm946es/cpu.c |
13 +
arch/arm/cpu/arm946es/start.S |
246 +-------------
arch/arm/cpu/arm_intcm/start.S |
228 +------------
arch/arm/cpu/armv7/exynos/pinmux.c |
561 +++++++++++++++++--------------
arch/arm/cpu/armv7/rmobile/Makefile
| 4 +-
arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c |
29 -- arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
cpu_info-rcar.c} | 12 +-
arch/arm/cpu/armv7/rmobile/cpu_info.c |
49 ++-
arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S |
20 +-
arch/arm/cpu/armv7/socfpga/lowlevel_init.S |
15 +-
arch/arm/cpu/armv7/start.S |
253 +-------------
arch/arm/cpu/armv7/zynq/u-boot.lds
| 2 +-
arch/arm/cpu/pxa/cpuinfo.c
| 6 +
arch/arm/cpu/pxa/start.S |
253 +-------------
arch/arm/cpu/sa1100/cpu.c |
14 +
arch/arm/cpu/sa1100/start.S |
225 +------------
arch/arm/cpu/tegra-common/pinmux-common.c |
19 ++
arch/arm/cpu/u-boot-spl.lds
| 1 +
arch/arm/cpu/u-boot.lds
| 1 +
arch/arm/dts/exynos4210-origen.dts
| 4 +-
arch/arm/dts/exynos4210-trats.dts
| 6 +-
arch/arm/dts/exynos4210-universal_c210.dts
| 4 +-
arch/arm/dts/exynos4412-trats2.dts
| 4 +-
arch/arm/dts/imx6q-sabreauto.dts |
10 +-
arch/arm/imx-common/Makefile
| 1 +
arch/arm/imx-common/iomux-v3.c
| 8 +
arch/arm/imx-common/video.c |
65 ++++
arch/arm/include/asm/arch-am33xx/clock.h
| 2 +
arch/arm/include/asm/arch-exynos/cpu.h |
17 +-
arch/arm/include/asm/arch-exynos/gpio.h |
1761
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------
arch/arm/include/asm/arch-mx25/imx-regs.h |
175 ++++++++++
arch/arm/include/asm/arch-mx6/mx6sl_pins.h
| 4 +
arch/arm/include/asm/arch-omap5/clock.h
| 3 +
arch/arm/include/asm/arch-omap5/omap.h
| 1 +
arch/arm/include/asm/arch-rmobile/r8a7790.h |
609 +---------------------------------
arch/arm/include/asm/arch-rmobile/r8a7791.h |
626 +----------------------------------
arch/arm/include/asm/arch-rmobile/rcar-base.h |
637 +++++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-rmobile/rmobile.h
| 6 +
arch/arm/include/asm/arch-s5pc1xx/gpio.h |
948 ++++++++++++++++++++++++++++++++++++++++++++--------
arch/arm/include/asm/arch-tegra/gpio.h |
20 ++
arch/arm/include/asm/arch-tegra/pinmux.h
| 5 +
arch/arm/include/asm/arch-tegra/tegra_mmc.h
| 2 -
arch/arm/include/asm/arch-tegra114/pinmux.h
| 1 +
arch/arm/include/asm/arch-tegra124/pinmux.h
| 1 +
arch/arm/include/asm/arch-tegra20/pinmux.h
| 1 +
arch/arm/include/asm/arch-tegra30/pinmux.h
| 1 +
arch/arm/include/asm/imx-common/iomux-v3.h
| 5 +
arch/arm/include/asm/imx-common/video.h |
24 ++
arch/arm/lib/Makefile
| 2 +-
arch/arm/lib/cache.c |
13 +-
arch/arm/lib/vectors.S |
291 ++++++++++++++++
board/boundary/nitrogen6x/nitrogen6x.c |
69 +---
board/compulab/cm_t335/u-boot.lds
| 1 +
board/embest/mx6boards/Makefile
| 9 +
board/embest/mx6boards/mx6boards.c |
601 +++++++++++++++++++++++++++++++++
board/freescale/mx31ads/u-boot.lds
| 1 +
board/freescale/mx6sabresd/mx6sabresd.c |
67 +---
board/freescale/mx6slevk/mx6slevk.c |
20 ++
board/gateworks/gw_ventana/gw_ventana.c |
215 ++++++++++--
board/gateworks/gw_ventana/ventana_eeprom.h |
14 +-
board/gumstix/pepper/Makefile |
13 +
board/gumstix/pepper/board.c |
226 +++++++++++++
board/gumstix/pepper/board.h |
19 ++
board/gumstix/pepper/mux.c |
78 +++++
board/nvidia/jetson-tk1/jetson-tk1.c
| 6 +
board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h |
256 +++++++++-----
board/nvidia/venice2/pinmux-config-venice2.h |
567 +++++++++++++++----------------
board/nvidia/venice2/venice2.c |
19 +-
board/renesas/koelsch/koelsch.c |
194 +----------
board/renesas/koelsch/qos.c |
404 ++++++++++++++---------
board/renesas/lager/lager.c |
196 +----------
board/renesas/lager/qos.c |
236 ++++++-------
board/samsung/arndale/arndale.c |
11 +-
board/samsung/common/misc.c |
130 ++++----
board/samsung/goni/goni.c |
32 +-
board/samsung/smdk5250/exynos5-dt.c |
20 +-
board/samsung/smdk5250/smdk5250.c |
19 +-
board/samsung/smdk5420/smdk5420.c |
15 +-
board/samsung/smdkc100/smdkc100.c
| 5 +-
board/samsung/smdkv310/smdkv310.c |
19 +-
board/samsung/trats/trats.c |
39 +--
board/samsung/trats2/trats2.c |
74 ++---
board/samsung/universal_c210/universal.c |
51 ++-
board/siemens/common/board.c |
46 ++- board/siemens/{dxr2 =>
draco}/Makefile | 0 board/siemens/{dxr2
=> draco}/board.c | 112 ++++---
board/siemens/{dxr2 => draco}/board.h |
26 +- board/siemens/{dxr2 =>
draco}/mux.c | 2 +-
board/siemens/pxm2/board.c |
10 +-
board/siemens/rut/board.c
| 2 +-
board/ti/am335x/u-boot.lds
| 1 +
board/wandboard/wandboard.c |
146 ++++++--
boards.cfg
| 9 +-
common/spl/spl_nand.c
| 2 +-
drivers/gpio/s5p_gpio.c |
204 ++++++++++--
drivers/gpio/tegra_gpio.c |
20 ++
drivers/mmc/tegra_mmc.c |
13 +-
drivers/mtd/nand/omap_gpmc.c
| 2 +-
drivers/power/pmic/Makefile
| 1 +
drivers/power/pmic/pmic_ltc3676.c |
32 ++
drivers/power/pmic/pmic_pfuze100.c
| 2 +-
drivers/video/Makefile
| 1 +
drivers/video/imx25lcdc.c |
121 +++++++
include/configs/beaver.h
| 3 +
include/configs/cardhu.h
| 3 +
include/configs/da850evm.h
| 1 +
include/configs/draco.h |
92 ++++++
include/configs/dxr2.h
| 4 +-
include/configs/embestmx6boards.h |
336 +++++++++++++++++++
include/configs/exynos5-dt.h
| 2 +
include/configs/gw_ventana.h |
20 ++
include/configs/hummingboard.h
| 2 +
include/configs/k2hk_evm.h
| 1 +
include/configs/koelsch.h |
36 +-
include/configs/lager.h |
40 +--
include/configs/m28evk.h
| 1 -
include/configs/mx53ard.h
| 2 +
include/configs/mx53evk.h
| 2 +
include/configs/mx53loco.h
| 2 +
include/configs/mx53smd.h
| 2 +
include/configs/mx6sabre_common.h
| 2 +
include/configs/mx6sabresd.h
| 1 +
include/configs/mx6slevk.h |
12 +
include/configs/mxs.h
| 1 +
include/configs/nitrogen6x.h
| 2 +
include/configs/omap3_beagle.h |
10 +-
include/configs/pepper.h |
99 ++++++
include/configs/pxm2.h
| 2 +-
include/configs/s5p_goni.h
| 4 +-
include/configs/s5pc210_universal.h |
23 +-
include/configs/siemens-am33x-common.h
| 8 +-
include/configs/smdk5250.h
| 4 +
include/configs/smdk5420.h
| 4 +
include/configs/smdkv310.h
| 1 +
include/configs/snow.h
| 4 +
include/configs/tegra-common.h
| 7 +
include/configs/trats.h |
17 +-
include/configs/trats2.h |
17 +-
include/configs/udoo.h
| 2 +
include/configs/wandboard.h |
38 ++-
include/palmas.h
| 4 +
include/power/ltc3676_pmic.h |
51 +++
include/power/pfuze100_pmic.h
| 1 +
include/samsung/misc.h
| 2 + 156 files changed, 7581 insertions(+), 6187 deletions(-)
delete mode 100644 arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
rename arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
cpu_info-rcar.c} (50%) create mode 100644 arch/arm/imx-common/video.c
create mode 100644 arch/arm/include/asm/arch-rmobile/rcar-base.h
create mode 100644 arch/arm/include/asm/imx-common/video.h create mode
100644 arch/arm/lib/vectors.S create mode 100644
board/embest/mx6boards/Makefile create mode 100644
board/embest/mx6boards/mx6boards.c create mode 100644
board/gumstix/pepper/Makefile create mode 100644
board/gumstix/pepper/board.c create mode 100644
board/gumstix/pepper/board.h create mode 100644
board/gumstix/pepper/mux.c rename board/siemens/{dxr2 =>
draco}/Makefile (100%) rename board/siemens/{dxr2 => draco}/board.c
(63%) rename board/siemens/{dxr2 => draco}/board.h (71%) rename
board/siemens/{dxr2 => draco}/mux.c (99%) create mode 100644
drivers/power/pmic/pmic_ltc3676.c create mode 100644
drivers/video/imx25lcdc.c create mode 100644 include/configs/draco.h
create mode 100644 include/configs/embestmx6boards.h create mode
100644 include/configs/pepper.h create mode 100644
include/power/ltc3676_pmic.h
Amicalement,
--
Albert.
next reply other threads:[~2014-05-20 8:57 UTC|newest]
Thread overview: 259+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-20 8:57 Albert ARIBAUD [this message]
2014-05-22 19:12 ` [U-Boot] Pull request: u-boot-arm/master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2016-01-31 20:40 Albert ARIBAUD
2016-02-01 16:54 ` Tom Rini
2015-11-10 17:45 Albert ARIBAUD
2015-11-10 20:15 ` Tom Rini
2015-10-15 21:19 Albert ARIBAUD
2015-10-15 22:00 ` Tom Rini
2015-07-31 1:06 Albert ARIBAUD
2015-08-01 14:47 ` Tom Rini
2015-07-06 15:20 Albert ARIBAUD
2015-07-06 21:15 ` Tom Rini
2015-07-06 22:09 ` Albert ARIBAUD
2015-07-06 23:59 ` Tom Rini
2015-07-07 5:49 ` Albert ARIBAUD
2015-07-07 10:01 ` Albert ARIBAUD
2015-07-02 21:27 Albert ARIBAUD
2015-07-02 22:55 ` Tom Rini
2015-07-05 14:11 ` Albert ARIBAUD
2015-05-05 9:30 Albert ARIBAUD
2015-05-05 23:59 ` Tom Rini
2015-01-04 18:11 Albert ARIBAUD
2015-01-05 15:10 ` Tom Rini
2014-11-24 17:30 Albert ARIBAUD
2014-11-24 22:13 ` Tom Rini
2014-11-13 7:54 Albert ARIBAUD
2014-11-08 0:07 Albert ARIBAUD
2014-11-10 21:28 ` Tom Rini
2014-10-11 0:38 Albert ARIBAUD
2014-10-11 11:49 ` Tom Rini
2014-10-07 11:16 Albert ARIBAUD
2014-10-07 16:02 ` Tom Rini
2014-09-17 21:40 Albert ARIBAUD
2014-09-18 1:00 ` Tom Rini
2014-09-12 13:42 Albert ARIBAUD
2014-09-12 19:15 ` Tom Rini
2014-07-29 13:08 Albert ARIBAUD
2014-07-29 14:30 ` Tom Rini
2014-07-05 8:18 Albert ARIBAUD
2014-07-05 16:48 ` Tom Rini
2014-07-04 22:57 Albert ARIBAUD
2014-07-05 0:20 ` Tom Rini
2014-07-02 20:33 Albert ARIBAUD
2014-07-02 22:38 ` Tom Rini
2014-06-08 7:51 Albert ARIBAUD
2014-06-09 2:25 ` Tom Rini
2014-05-30 15:20 Albert ARIBAUD
2014-05-30 17:59 ` Tom Rini
2014-05-24 9:32 Albert ARIBAUD
2014-05-24 20:37 ` Tom Rini
2014-05-09 9:56 Albert ARIBAUD
2014-05-09 16:15 ` Tom Rini
2014-04-08 11:40 Albert ARIBAUD
2014-04-08 16:39 ` Tom Rini
2014-03-10 18:16 Albert ARIBAUD
2014-03-10 21:27 ` Tom Rini
2014-02-26 21:40 Albert ARIBAUD
2014-02-26 23:39 ` Tom Rini
2014-02-13 17:43 Albert ARIBAUD
2014-02-18 17:50 ` Tom Rini
2014-02-18 18:21 ` Stephen Warren
2014-02-18 18:29 ` Tom Rini
2014-02-18 18:47 ` Albert ARIBAUD
2014-01-15 15:16 Albert ARIBAUD
2014-01-14 13:04 Albert ARIBAUD
2014-01-14 21:02 ` Tom Rini
2014-01-13 18:49 Albert ARIBAUD
2014-01-13 19:42 ` Tom Rini
2014-01-10 15:43 Albert ARIBAUD
2014-01-10 20:03 ` Tom Rini
2014-01-11 8:11 ` Albert ARIBAUD
2013-12-10 22:05 Albert ARIBAUD
2013-12-11 16:44 ` Tom Rini
2013-11-09 22:53 Albert ARIBAUD
2013-11-11 19:13 ` Tom Rini
2013-10-11 14:33 Albert ARIBAUD
2013-10-14 15:20 ` Tom Rini
2013-10-07 20:02 Albert ARIBAUD
2013-10-08 19:33 ` Tom Rini
2013-10-03 20:42 Albert ARIBAUD
2013-10-04 18:46 ` Tom Rini
2013-10-02 15:34 Albert ARIBAUD
2013-10-02 18:20 ` Tom Rini
2013-09-12 13:18 Albert ARIBAUD
2013-09-12 15:11 ` Tom Rini
2013-09-12 20:54 ` Albert ARIBAUD
2013-09-06 22:55 Albert ARIBAUD
2013-09-09 14:56 ` Tom Rini
2013-07-10 20:33 [U-Boot] pull " Albert ARIBAUD
2013-06-21 21:52 [U-Boot] Pull " Albert ARIBAUD
2013-06-24 20:17 ` Tom Rini
2013-06-13 15:49 Albert ARIBAUD
2013-06-14 15:11 ` Tom Rini
2013-06-05 15:02 [U-Boot] pull " Albert ARIBAUD
2013-06-07 18:20 ` Tom Rini
2013-05-30 19:29 [U-Boot] Pull " Albert ARIBAUD
2013-05-31 20:51 ` Tom Rini
2013-04-17 16:37 Albert ARIBAUD
2013-04-18 20:17 ` Tom Rini
2013-04-15 19:36 Albert ARIBAUD
2013-04-16 15:58 ` Tom Rini
2013-04-14 19:32 Albert ARIBAUD
2013-04-15 15:51 ` Tom Rini
2013-04-10 23:12 Albert ARIBAUD
2013-04-10 23:20 ` Benoît Thébaudeau
2013-04-11 6:10 ` Albert ARIBAUD
2013-03-28 20:06 Albert ARIBAUD
2013-03-29 0:01 ` Tom Rini
2013-03-15 22:01 Albert ARIBAUD
2013-03-16 8:19 ` Albert ARIBAUD
2013-03-17 19:40 ` Tom Rini
2013-03-18 17:06 ` Tom Rini
2013-03-18 17:43 ` Albert ARIBAUD
2013-03-18 18:38 ` Tom Rini
2013-02-12 14:25 Albert ARIBAUD
2013-02-15 16:33 ` Tom Rini
2013-01-14 16:58 Albert ARIBAUD
2013-01-14 23:18 ` Tom Rini
2013-01-11 21:36 Albert ARIBAUD
2013-01-11 23:44 ` Tom Rini
2013-01-09 14:43 Albert ARIBAUD
2013-01-09 19:35 ` Tom Rini
2013-01-08 15:07 Albert ARIBAUD
2013-01-08 20:50 ` Simon Glass
2013-01-08 21:01 ` Albert ARIBAUD
2013-01-08 21:06 ` Simon Glass
2013-01-08 22:34 ` Tom Rini
2012-12-22 12:11 Albert ARIBAUD
2012-12-22 15:20 ` Tom Rini
2013-01-03 6:41 ` Joonyoung Shim
2013-01-03 7:12 ` Lukasz Majewski
2012-11-04 21:51 Albert ARIBAUD
2012-11-05 16:54 ` Tom Rini
2012-11-05 19:45 ` Stephen Warren
2012-11-08 15:08 ` Tom Rini
2012-10-26 22:30 Albert ARIBAUD
2012-10-27 0:20 ` Tom Rini
2012-10-19 23:55 Albert ARIBAUD
2012-10-20 17:39 ` Tom Rini
2012-10-05 19:26 Albert ARIBAUD
2012-10-05 22:26 ` Tom Rini
2012-10-04 16:57 Albert ARIBAUD
2012-10-04 18:31 ` Tom Rini
2012-09-21 21:35 Albert ARIBAUD
2012-09-22 0:21 ` Tom Rini
2012-09-01 16:37 Albert ARIBAUD
2012-09-01 22:27 ` Wolfgang Denk
2012-07-10 6:30 Albert ARIBAUD
2012-07-10 7:04 ` Wolfgang Denk
2012-07-07 12:12 Albert ARIBAUD
2012-07-08 20:13 ` Wolfgang Denk
2012-05-15 6:57 Albert ARIBAUD
2012-05-20 20:33 ` Wolfgang Denk
2012-04-16 14:52 Albert ARIBAUD
2012-04-16 18:18 ` Marek Vasut
2012-04-16 20:09 ` Albert ARIBAUD
2012-04-16 20:15 ` Albert ARIBAUD
2012-04-17 5:33 ` Stefano Babic
2012-03-30 7:10 Albert ARIBAUD
2012-03-30 17:58 ` Wolfgang Denk
2012-02-27 20:23 Albert ARIBAUD
2012-03-03 14:09 ` Wolfgang Denk
2012-02-12 9:16 Albert ARIBAUD
2012-02-12 21:06 ` Wolfgang Denk
2012-01-16 8:16 Albert ARIBAUD
2012-01-17 21:36 ` Wolfgang Denk
2011-12-24 9:27 Albert ARIBAUD
2012-01-05 15:53 ` Wolfgang Denk
2011-12-19 16:55 Albert ARIBAUD
2011-12-20 21:40 ` Wolfgang Denk
2011-12-11 13:38 Albert ARIBAUD
2011-12-12 6:58 ` Wolfgang Denk
2011-12-09 16:42 Albert ARIBAUD
2011-12-10 21:54 ` Wolfgang Denk
2011-12-06 23:17 Albert ARIBAUD
2011-12-07 10:16 ` Wolfgang Denk
2011-11-15 21:28 Albert ARIBAUD
2011-11-16 0:04 ` Simon Glass
2011-11-16 2:27 ` Marek Vasut
2011-11-16 3:45 ` Simon Glass
2011-11-16 3:53 ` Mike Frysinger
2011-11-16 4:05 ` Simon Glass
2011-11-16 19:24 ` Wolfgang Denk
2011-11-17 13:45 ` Albert ARIBAUD
2011-11-17 21:39 ` Mike Frysinger
2011-11-17 21:56 ` Wolfgang Denk
2011-11-17 22:03 ` Albert ARIBAUD
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF1740D74CB5@HQMAIL01.nvidia.com>
[not found] ` <7E91C59574E9954FA075F8D8CCDF78DB38FE7FF7A9@HQMAIL04.nvidia.com>
2011-11-17 22:04 ` Simon Glass
2011-11-16 6:28 ` Heiko Schocher
2011-11-16 19:42 ` Wolfgang Denk
2011-11-07 20:58 Albert ARIBAUD
2011-11-08 0:02 ` Wolfgang Denk
2011-09-30 20:09 Albert ARIBAUD
2011-10-01 19:40 ` Wolfgang Denk
2011-10-04 5:35 ` Simon Glass
2011-10-21 18:44 ` Albert ARIBAUD
2011-10-21 19:12 ` Simon Glass
2011-09-28 6:38 Albert ARIBAUD
2011-09-28 18:42 ` Wolfgang Denk
2011-09-22 21:03 Albert ARIBAUD
2011-09-23 6:29 ` Wolfgang Denk
2011-09-14 6:57 Albert ARIBAUD
2011-09-15 12:24 ` Wolfgang Denk
2011-08-31 10:13 Albert ARIBAUD
2011-08-31 11:57 ` Marek Vasut
2011-09-01 8:59 ` Aneesh V
2011-09-03 19:26 ` Albert ARIBAUD
2011-09-04 8:44 ` Aneesh V
2011-09-04 9:01 ` Albert ARIBAUD
2011-09-04 9:02 ` Aneesh V
2011-09-04 9:12 ` Albert ARIBAUD
2011-09-04 9:17 ` Aneesh V
2011-08-04 12:28 Albert ARIBAUD
2011-07-18 13:38 Albert ARIBAUD
2011-07-18 14:31 ` Igor Grinberg
2011-07-18 17:52 ` Albert ARIBAUD
2011-08-12 8:21 ` Albert ARIBAUD
2011-07-18 19:17 ` Wolfgang Denk
2011-07-04 9:08 Albert ARIBAUD
2011-07-04 22:32 ` Wolfgang Denk
2011-06-30 6:24 Albert ARIBAUD
2011-06-30 11:15 ` Albert ARIBAUD
2011-06-28 5:39 Albert ARIBAUD
2011-06-28 9:52 ` Igor Grinberg
2011-06-28 10:20 ` Igor Grinberg
2011-06-28 21:19 ` Albert ARIBAUD
2011-06-28 10:48 ` Wolfgang Denk
2011-06-29 6:09 ` Albert ARIBAUD
2011-06-29 21:09 ` Wolfgang Denk
2011-06-21 20:28 Albert ARIBAUD
2011-06-22 9:17 ` Wolfgang Denk
2011-06-22 12:18 ` Wolfgang Denk
2011-06-22 13:51 ` Albert ARIBAUD
2011-06-08 20:41 Albert ARIBAUD
2011-06-08 21:32 ` Wolfgang Denk
2011-05-31 20:31 Albert ARIBAUD
2011-05-31 22:29 ` John Rigby
2011-06-01 17:15 ` Albert ARIBAUD
2011-06-01 20:15 ` Wolfgang Denk
2011-05-11 21:07 Albert ARIBAUD
2011-05-11 22:11 ` Rogan Dawes
2011-05-12 5:41 ` Albert ARIBAUD
2011-05-12 8:48 ` Prafulla Wadaskar
2011-05-12 9:06 ` Simon Guinot
2011-05-12 9:12 ` Simon Guinot
2011-05-12 17:27 ` Wolfgang Denk
2011-05-14 18:38 ` Dirk Behme
2011-04-28 16:14 Albert ARIBAUD
2011-04-28 21:17 ` Wolfgang Denk
2011-04-27 17:40 Albert ARIBAUD
2011-04-27 20:16 ` Wolfgang Denk
2011-04-27 23:42 ` Macpaul Lin
2011-04-28 21:14 ` Wolfgang Denk
2011-04-29 1:31 ` Macpaul Lin
2011-04-30 20:44 ` Wolfgang Denk
2011-05-02 8:46 ` Macpaul Lin
2011-05-02 10:31 ` Wolfgang Denk
2011-03-27 17:25 Albert ARIBAUD
2011-03-27 19:32 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1WmfrB-0000CW-1V@janus \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.