From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-arm/master
Date: Mon, 18 Mar 2013 13:06:06 -0400 [thread overview]
Message-ID: <20130318170606.GA25919@bill-the-cat> (raw)
In-Reply-To: <20130315230112.14998ce0@lilith>
On Fri, Mar 15, 2013 at 11:01:12PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> Here is a PR for ARM. Note that doc/README.scrapyard will need a manual
> merge resolution due to ARM tree having a commit that reorders the
> headers and reformats the lines while mainline has a commit adding two
> new entries still in the older format.
>
> The following changes since commit
> fc959081d41aab2d6f4614c5fb3dd1b77ffcdcf4:
>
> x86: Enable CONFIG_OF_CONTROL on coreboot (2013-03-04 15:57:52 -0800)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to b27673ccbd3d5435319b5c09c3e7061f559f925d:
>
> Merge branch 'u-boot-tegra/master' into
> 'u-boot-arm/master' (2013-03-15 20:50:43 +0100)
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (9):
> Merge 'u-boot-microblaze/mainline/arm' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
> arm: omap: map u_boot_lists section to .sram
> Remove linker lists (LGAs) from SPL linker scripts
> arm: make __bss_start and __bss_end__ compiler-generated
> Refactor linker-generated arrays
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
>
> Beno??t Th??baudeau (6):
> imx: mx6q DDR3 init: Fix tMRD
> imx: mx6q DDR3 init: Fix tXPR
> imx: mx6q DDR3 init: Fix SDE_to_RST
> imx: mx6q DDR3 init: Fix RST_to_CKE
> imx: mx6q DDR3 init: Fix MR0.PPD
> imx: mx6q DDR3 init: Benefit from available CL = 7
>
> Bo Shen (3):
> ARM: atmel: add at91sam9g20ek_2mmc nand boot support
> ARM: at91: change nand flash table
> ARM: at91sam9x5: Using CPU string directly
>
> Chase Maupin (3):
> am335x_evm: Add NAND environment variables
> am335x_evm: Add SPI environment variables
> am335x_evm: Add NET environment variables
>
> Enric Balletbo i Serra (7):
> OMAP3: igep00x0: use official board names.
> OMAP3: igep00x0: add missing include mach-types.h
> OMAP3: igep00x0: Add new IGEP COM PROTON.
> SPL: ONENAND: Fix some ONENAND related defines.
> SPL: ONENAND: Fix onenand_spl_load_image implementation.
> SPL: ONENAND: Support SPL to boot u-boot from OneNAND.
> OMAP3: Initialize gpmc if SPL_ONENAND_SUPPORT is enabled.
>
> Eric Nelson (8):
> i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST
> i.MX6: mx6qsabrelite: indent with tabs
> i.MX6: consolidate pad names for multi-CPU boards
> i.MX6: crm_regs: define CCM_CCGRx for use in board config files
> i.MX6: crm_regs: define IOMUXC_GPR4/6/7
> i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIO
> i.MX6: Add DDR controller registers
> Add Boundary Devices Nitrogen6X boards
>
> Fabio Estevam (6):
> mx6: Disable Power Down Bit of watchdog
> mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
> mx23evk: Turn on caches
> common: cmd_sata: Fix usage text for 'sata init'
> mx6: Provide a structure for accessing HDMI registers
> nitrogen6x: Fix RAM size variable
>
> Fadil Berisha (2):
> mxs: timrot: Add support to i.MX23
> mxs: timrot: Rename local macros
>
> Howard Gray (1):
> omap3: mvblx: change console to ttyO0 and make silent by default.
>
> Ilya Yanok (4):
> spl: support for booting via usbeth
> am33xx: support for booting via usbeth
> am335x_evm: enable support for booting via USB
> doc/SPL/README.am335x-network: Document using ethernet (and USB)
> SPL
>
> Jesse Gilles (1):
> ARM: sam9x5: fix ethernet pins in MII mode
>
> Lars Poeschel (1):
> am33xx: pcm051: Remove wp pin mux for sd-card
>
> Lokesh Vutla (13):
> ARM: OMAP4+: emif: Detect SDRAM from SDRAM config register
> ARM: OMAP4+: Cleanup emif specific files
> ARM: OMAP4+: Make control module register structure generic
> ARM: OMAP5: Clean up iosettings code
> ARM: OMAP5: Add DDR changes required for OMAP543X ES2.0 SOCs
> ARM: OMAP5: srcomp: enable slew rate compensation cells after
> powerup arm: dra7xx: clock: Add the prcm changes
> arm: dra7xx: clock: Add the dplls data
> arm: dra7xx: Add control module changes
> arm: dra7xx: Add DDR related data for DRA752 ES1.0
> arm: dra7xx: Add board files for DRA7XX socs
> arm: dra7xx: Add dra7xx_evm build support
> arm: dra7xx: Add silicon id support for DRA752 soc
>
> Lucas Stach (7):
> tegra: usb: set USB_PORTS_MAX to correct value
> tegra: usb: make controller init functions more self contained
> tegra: usb: remove unneeded function parameter
> tegra: usb: move controller init into start_port
> tegra: usb: various small cleanups
> tegra: usb: move implementation into right directory
> tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]
>
> Marek Vasut (7):
> mxs: Reset the EMI block on mx23
> mxs: mmc: spi: dma: Better wrap the MXS differences
> mxs: spi: Fix the MXS SPI for mx23
> mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLE
> mxs: Squash the header file usage in ehci-mxs
> mxs: Make ehci-mxs multiport capable
> mxs: m28: Enable power to USB port 0
>
> Mark Jackson (1):
> Allow AM33xx boards to setup GPMC chipselects.
>
> Michael Jones (2):
> omap3: mvblx: select fpgafilename according to orientation
> omap3: mvblx: pass FPGA version to the kernel
>
> Michal Simek (3):
> xilinx: zynq: Enable DCC and create new zynq_dcc board
> arm: zynq: Add SLCR support with system reset
> arm: zynq: Add lowlevel initialization to C
>
> Mugunthan V N (1):
> am335x: cpsw: optimize cpsw_send to increase network performance
>
> Nicolas Ferre (2):
> arm: at91/configs: add libfdt to configuration
> arm: at91/configs: add bootz to configuration
>
> Nikita Kiryanov (14):
> omap: consolidate common mmc definitions
> omap_hsmmc: fix out of bounds array access
> omap_hsmmc: introduce omap_hsmmc_data struct
> omap_hsmmc: implement driver check for card detection
> cm-t35: implement board specific card detect check
> mmc: add support for write protection
> omap_hsmmc: add driver check for write protection
> omap3: add useful dss defines
> omap3: allow dynamic selection of gfx_format
> lcd: add option for board specific splash screen preparation
> cm-t35: add support for dvi displays
> cm-t35: add support for user defined lcd parameters
> lcd: implement a callback for splashimage
> cm_t35: prevent splashimage from being set to a bad value
>
> Otavio Salvador (11):
> build: imx: Fix 'u-boot.imx' build without full OBJTREE reference
> mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to
> CONFIG_SPL_MXS_PSWITCH_WAIT mx23: Document the tRAS lockout setting in
> memory initialization mx23evk: Adjust DRAM control register to use full
> 128MB of RAM led: Use STATUS_LED_ON and STATUS_LED_OFF when calling
> __led_set mxs: Fix iomux.h to not break build during assembly stage
> mx23_olinuxino: Add support for status LED
> mx23evk: Enable USB support
> mx23_olinuxino: Enable USB support
> mx23_olinuxino: Add ethernet support
> mx23_olinuxino: Fix warning for implicit declaration
>
> SRICHARAN R (6):
> ARM: OMAP4+: Change the PRCM structure prototype common for all
> Socs ARM: OMAP4+: Cleanup the clocks layer
> ARM: OMAP4+: Clean up the pmic code
> ARM: OMAP5: Add silicon id support for ES2.0 revision.
> ARM: OMAP5: clock: Add the prcm register changes required for
> ES2.0 ARM: OMAP4/5: clocks: Add the required OPP settings as per the
> latest addendum
>
> Stefano Babic (3):
> Merge branch 'master' of git://git.denx.de/u-boot-arm
> Merge branch 'master' of git://git.denx.de/u-boot-arm
> USB: drop unneeded header in ehci-mx6
>
> Stephen Warren (8):
> ARM: mx6: use common CPU errata config options
> ARM: implement some Cortex-A9 errata workarounds
> ARM: tegra: enable some CPU errata workarounds
> ARM: tegra: implement WAR for Tegra114 CPU reset vector
> ARM: tegra: make bounce buffer option common
> disk: define HAVE_BLOCK_DEVICE in a common place
> disk: define HAVE_BLOCK_DEVICE if CONFIG_CMD_PART
> ARM: tegra: enable a common set of disk-related commands
> everywhere
>
> Tom Rini (9):
> am335x evm: Add am335x_evm_spiboot target
> am335x_evm: Never set CONFIG_EXTRA_ENV_SETTINGS in SPL
> am335x_evm: Add am335x_evm_usbspl build target
> am33xx: Update DDR3 EMIF configuration sequence
> am335x_evm: Enable CONFIG_CMD_BOOTZ
> omap5_evm: Enable CONFIG_CMD_BOOTZ
> omap3_beagle: Enable CONFIG_CMD_BOOTZ
> omap4_common: Enable CONFIG_CMD_BOOTZ
> Merge u-boot/master into u-boot-ti/master
>
> Tom Warren (27):
> Tegra114: I2C: Take DVFS out of reset to allow I2C5 (PWR_I2C) to
> work Tegra: I2C: Add T114 clock support to tegra_i2c driver
> Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
> Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board
> Tegra: fdt: Change /include/ to #include for C preprocessor
> Tegra: fdt: tamonten: Add common tamonten.dtsi file from linux
> Tegra: fdt: Add/enhance sdhci (mmc) nodes for all T20 DT files
> Tegra: MMC: Add DT support to MMC driver for all T20 boards
> Tegra: fdt: Remove memreserve line from Cardhu/Seaboard DT files
> Tegra30: fdt: Sync DT nodes with kernel DT files (I2C, SPI, GPIO,
> clock) Tegra: Add twarren as maintainer for Tegra30 and Tegra114 SoCs
> Tegra: Remove unused CONFIG_SYS_CPU_OSC_FREQUENCY define
> Tegra114: fdt: Sync DT nodes with kernel DT files (GPIO,
> tegra_car) Tegra30: Cardhu: Remove unneeded cardhu.c.mmc file
> Tegra114: pinmux: Update pinmux tables & code, fix a bug w/SDMMC3
> init Tegra30: Cardhu: Add pad config tables/code based on pinmux code
> Tegra30: fdt: Add SDMMC (sdhci) nodes for T30 boards (Cardhu for
> now) Tegra: MMC: Added/update SDMMC registers/base addresses for T20/T30
> Tegra30: MMC: Add SD bus power-rail and SDMMC pad init routines
> mmc: Tegra: Add SD bus power/voltage function and MMC pad init
> call. Tegra30: mmc: Add Tegra30 SDMMC compatible entry to fdtdec &
> driver Tegra30: MMC: Enable DT MMC driver support for Tegra30 Cardhu
> boards Tegra114: pinmux: Fix bad CAM_MCLK func 3 table entry
> Tegra114: Fix/update GP padcfg register struct
> Tegra114: Dalmore: Always use DEFAULT instead of DISABLE for lock
> bits Tegra114: fdt: Move aliases from dtsi to dts file as per other
> Tegras Tegra114: Dalmore: Add pad config tables/code based on pinmux
> code
>
> Tomas Novotny (2):
> da8xx: ea20: Add the configuration define for the exact SoC
> variant da8xx: Add the missing pinmux for da830 to the gpio driver
>
> Wolfgang Denk (2):
> README.scrapyard: add missing commit IDs
> ARM: ns9750dev: remove remainders of dead board
>
> fabio.estevam at freescale.com (1):
> nitrogen: Use unsigned long to specify the total RAM size
>
> robertcnelson at gmail.com (2):
> beagle: expansion boards: retry i2c_read with 16bit addressing
> beagle: expansion boards: add LSR COM6L adapter
I've merged, but not pushed this, with the following merge commit (I
couldn't get a nice pretty print like last time):
To try and explain this since diff-diffs are funny:
- Consolidate around using __bss_end (so in a few new files, and a lot
of changed files, add __bss_end not __bssend__ or similar).
- Add hashes for PCIPPC2 / PCIPPC6 in scrapyard.
- In tegra20, both CONFIG_SYS_GENERIC_BOARD and CONFIG_BOUNCE_BUFFER are
set.
commit cf0d1242c87217ba0ce5ecb2f87dfcd1b40b7892
Merge: b5bec88 b27673c
Author: Tom Rini <trini@ti.com>
Date: Mon Mar 18 12:31:00 2013 -0400
Merge branch 'master' of git://git.denx.de/u-boot-arm
Albert's rework of the linker scripts conflicted with Simon's making
everyone use __bss_end. We also had a minor conflict over
README.scrapyard being added to in mainline and enhanced in
u-boot-arm/master with IDs for when stuff was removed.
Conflicts:
arch/arm/cpu/ixp/u-boot.lds
arch/arm/cpu/u-boot.lds
arch/arm/lib/Makefile
board/actux1/u-boot.lds
board/actux2/u-boot.lds
board/actux3/u-boot.lds
board/dvlhost/u-boot.lds
board/freescale/mx31ads/u-boot.lds
doc/README.scrapyard
include/configs/tegra-common.h
Build tested for all of ARM and run-time tested on am335x_evm.
Signed-off-by: Tom Rini <trini@ti.com>
diff --cc arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
index 0000000,69f6d48..b6a929f
mode 000000,100644..100644
--- a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
@@@ -1,0 -1,67 +1,67 @@@
+ /*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
+ LENGTH = CONFIG_SPL_MAX_SIZE }
+ MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+ LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+ OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+ OUTPUT_ARCH(arm)
+ ENTRY(_start)
+ SECTIONS
+ {
+ .text :
+ {
+ __start = .;
+ arch/arm/cpu/armv7/start.o (.text)
+ *(.text*)
+ } >.sram
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+ . = ALIGN(4);
+ .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ } >.sram
+
+ . = ALIGN(4);
+ __image_copy_end = .;
+ _end = .;
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
- __bss_end__ = .;
++ __bss_end = .;
+ } >.sdram
+ }
diff --cc arch/arm/cpu/ixp/u-boot.lds
index 2c823e1,5e66dd1..8345b55
--- a/arch/arm/cpu/ixp/u-boot.lds
+++ b/arch/arm/cpu/ixp/u-boot.lds
@@@ -67,11 -67,17 +67,17 @@@ SECTION
_end = .;
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- __bss_end = .;
- ___bssend___ = .;
++ __bss_end = .;
+ }
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
}
/DISCARD/ : { *(.dynstr*) }
diff --cc arch/arm/cpu/u-boot-spl.lds
index 0000000,8321afb..3c0d99c
mode 000000,100644..100644
--- a/arch/arm/cpu/u-boot-spl.lds
+++ b/arch/arm/cpu/u-boot-spl.lds
@@@ -1,0 -1,93 +1,93 @@@
+ /*
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+ OUTPUT_ARCH(arm)
+ ENTRY(_start)
+ SECTIONS
+ {
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ __image_copy_start = .;
+ CPUDIR/start.o (.text*)
+ *(.text*)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data*)
+ }
+
+ . = ALIGN(4);
+
+ . = .;
+
+ __image_copy_end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ _end = .;
+
+ /*
+ * Deprecated: this MMU section is used by pxa at present but
+ * should not be used by new boards/CPUs.
+ */
+ . = ALIGN(4096);
+ .mmutable : {
+ *(.mmutable)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
- __bss_end__ = .;
++ __bss_end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+ }
+
+ #if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE)
-ASSERT(__bss_end__ < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
++ASSERT(__bss_end < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
+ #endif
diff --cc arch/arm/cpu/u-boot.lds
index b337e7b,d4ad352..3a1083d
--- a/arch/arm/cpu/u-boot.lds
+++ b/arch/arm/cpu/u-boot.lds
@@@ -81,11 -81,17 +81,18 @@@ SECTION
*(.mmutable)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- __bss_end = .;
- ___bssend___ = .;
++ __bss_end = .;
+ }
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
}
/DISCARD/ : { *(.dynstr*) }
diff --cc arch/arm/lib/Makefile
index 24c7e7a,11c2674..6ae161a
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@@ -39,10 -39,8 +39,11 @@@ GLCOBJS += div0.
SOBJS-y += crt0.o
ifndef CONFIG_SPL_BUILD
-COBJS-y += bss.o
+ifndef CONFIG_SYS_GENERIC_BOARD
COBJS-y += board.o
+endif
++COBJS-y += bss.o
+
COBJS-y += bootm.o
COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o
SOBJS-$(CONFIG_USE_ARCH_MEMSET) += memset.o
diff --cc arch/arm/lib/bss.c
index 0000000,7c0b154..99eda59
mode 000000,100644..100644
--- a/arch/arm/lib/bss.c
+++ b/arch/arm/lib/bss.c
@@@ -1,0 -1,39 +1,39 @@@
+ /*
+ * Copyright 2013 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ /**
+ * These two symbols are declared in a C file so that the linker
+ * uses R_ARM_RELATIVE relocation, rather than the R_ARM_ABS32 one
+ * it would use if the symbols were defined in the linker file.
+ * Using only R_ARM_RELATIVE relocation ensures that references to
+ * the symbols are correct after as well as before relocation.
+ *
+ * We need a 0-byte-size type for these symbols, and the compiler
+ * does not allow defining objects of C type 'void'. Using an empty
+ * struct is allowed by the compiler, but causes gcc versions 4.4 and
+ * below to complain about aliasing. Therefore we use the next best
+ * thing: zero-sized arrays, which are both 0-byte-size and exempt from
+ * aliasing warnings.
+ */
+
+ char __bss_start[0] __attribute__((used, section(".__bss_start")));
-char __bss_end__[0] __attribute__((used, section(".__bss_end__")));
++char __bss_end[0] __attribute__((used, section(".__bss_end")));
diff --cc board/actux1/u-boot.lds
index a0d217b,7cf5b46..c76728a
--- a/board/actux1/u-boot.lds
+++ b/board/actux1/u-boot.lds
@@@ -72,13 -72,21 +72,21 @@@ SECTION
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
- ___bssend___ = .;
++ __bss_end = .;
}
- __bss_end =.;
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --cc board/actux2/u-boot.lds
index da2b4e2,e9b5547..984f70e
--- a/board/actux2/u-boot.lds
+++ b/board/actux2/u-boot.lds
@@@ -72,13 -72,21 +72,21 @@@ SECTION
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
- ___bssend___ = .;
++ __bss_end = .;
}
- __bss_end =.;
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --cc board/actux3/u-boot.lds
index f922033,b79ea3c..fc48cf0
--- a/board/actux3/u-boot.lds
+++ b/board/actux3/u-boot.lds
@@@ -72,13 -72,21 +72,21 @@@ SECTION
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
- ___bssend___ = .;
++ __bss_end = .;
}
- __bss_end =.;
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --cc board/dvlhost/u-boot.lds
index ed91003,eb83b6f..b13d3e1
--- a/board/dvlhost/u-boot.lds
+++ b/board/dvlhost/u-boot.lds
@@@ -72,13 -72,21 +72,21 @@@ SECTION
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
- ___bssend___ = .;
++ __bss_end = .;
}
- __bss_end =.;
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --cc board/freescale/mx31ads/u-boot.lds
index 4d1858b,2d08fea..264c4e8
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@@ -80,11 -80,17 +80,17 @@@ SECTION
_end = .;
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
- *(.bss)
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
+ *(.bss*)
. = ALIGN(4);
- __bss_end = .;
- ___bssend___ = .;
++ __bss_end = .;
+ }
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
}
/DISCARD/ : { *(.bss*) }
diff --cc doc/README.scrapyard
index 7d73ea0,e9ca96c..189b883
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@@ -9,85 -9,84 +9,86 @@@ maintain a list of such former fellows
easily if here is something they might want to dig for...
- Board Arch CPU removed Commit last known maintainer/contact
- =============================================================================
- AMX860 powerpc mpc860 - - Wolfgang Denk <wd@denx.de>
- c2mon powerpc mpc855 - - Wolfgang Denk <wd@denx.de>
- ETX094 powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
- IAD210 powerpc mpc860 - - -
- LANTEC powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
- SCM powerpc mpc8260 - - Wolfgang Grandegger <wg@denx.de>
- SX1 arm arm925t - -
- TQM85xx powerpc MPC85xx d923a5d5 2012-10-04 Stefan Roese <sr@denx.de>
- apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
- tb0229 mips mips32 3f3110d 2011-12-12
- rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
- OXC powerpc MPC8240 309a292 2011-12-07
- BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de>
- xm250 arm pxa c746cdd 2011-25-11
- pleb2 arm pxa b185a1c 2011-25-11
- cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net>
- cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com>
- mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com>
- ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de>
- ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net>
- zylonite arm pxa b66521a 2011-09-05
- shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de>
- modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org>
- lpc2292sodimm arm arm720t d1a067a 2011-09-05
- lart arm sa1100 3d57573 2011-09-05 Alex Z??pke <azu@sysgo.de>
- impa7 arm arm720t c1f8750 2011-09-05 Marius Gr??ger <mag@sysgo.de>
- gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com>
- evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com>
- ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gr??ger <mag@sysgo.de>
- dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Z??pke <azu@sysgo.de>
- SMN42 arm arm720t 6aac646 2011-09-05
- at91rm9200dk arm arm920t 1c85752 2011-07-17
- m501sk arm arm920t b1a2bd4 2011-07-17
- kb9202 arm arm920t 5bd3814 2011-07-17
- csb637 arm arm920t d14af08 2011-07-17
- cmc_pu2 arm arm920t 37a9b4d 2011-07-17
- at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net>
- voiceblue arm arm925t 1b793a4 2011-07-17
- smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de>
- sbc2410x arm arm920t 1f7f0ed 2011-07-17
- netstar arm arm925t 6ea2405 2011-07-17
- mx1fs2 arm arm920t 6962419 2011-07-17
- lpd7a404 arm lh7a40x 957731e 2011-07-17
- edb9301 arm arm920t 716f7ad 2011-07-17
- edb9302 arm arm920t 716f7ad 2011-07-17
- edb9302a arm arm920t 716f7ad 2011-07-17
- edb9307 arm arm920t 716f7ad 2011-07-17
- edb9307a arm arm920t 716f7ad 2011-07-17
- edb9312 arm arm920t 716f7ad 2011-07-17
- edb9315 arm arm920t 716f7ad 2011-07-17
- edb9315a arm arm920t 716f7ad 2011-07-17
- B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
- armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
- assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com>
- trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de>
- xsengine ARM PXA2xx 4262a7c 2010-10-20
- wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
- delta ARM PXA2xx 75e2035 2010-10-20
- mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric B??nard <eric@eukrea.com>
- barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com>
- ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de>
- VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de>
- NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
- CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
- logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at>
- CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de>
- PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de>
- spieval powerpc MPC5200 69434e4 2010-09-19
- smmaco4 powerpc MPC5200 9ddc3af 2010-09-19
- HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de>
- GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se>
- AmigaOneG3SE 953b7e6 2010-06-23
- suzaku microblaze 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com>
- XUPV2P microblaze 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu>
- MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de>
- adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com>
- R5200 ColdFire 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com>
- CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- PCIPPC2 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de>
+ Board Arch CPU Commit Removed Last known maintainer/contact
+ =================================================================================================
+ ns9750dev arm arm926ejs - - Markus Pietrek <mpietrek@fsforth.de>
+ AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+ c2mon powerpc mpc855 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+ ETX094 powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+ IAD210 powerpc mpc860 1b0757e 2012-10-28 -
+ LANTEC powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+ SCM powerpc mpc8260 1b0757e 2012-10-28 Wolfgang Grandegger <wg@denx.de>
+ SX1 arm arm925t 53c4154 2012-10-26
+ TQM85xx powerpc MPC85xx d923a5d 2012-10-04 Stefan Roese <sr@denx.de>
+ apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
+ tb0229 mips mips32 3f3110d 2011-12-12
+ rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
+ OXC powerpc MPC8240 309a292 2011-12-07
+ BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de>
+ xm250 arm pxa c746cdd 2011-25-11
+ pleb2 arm pxa b185a1c 2011-25-11
+ cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net>
+ cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com>
+ mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com>
+ ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de>
+ ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net>
+ zylonite arm pxa b66521a 2011-09-05
+ shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de>
+ modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org>
+ lpc2292sodimm arm arm720t d1a067a 2011-09-05
+ lart arm sa1100 3d57573 2011-09-05 Alex Z??pke <azu@sysgo.de>
+ impa7 arm arm720t c1f8750 2011-09-05 Marius Gr??ger <mag@sysgo.de>
+ gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com>
+ evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com>
+ ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gr??ger <mag@sysgo.de>
+ dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Z??pke <azu@sysgo.de>
+ SMN42 arm arm720t 6aac646 2011-09-05
+ at91rm9200dk arm arm920t 1c85752 2011-07-17
+ m501sk arm arm920t b1a2bd4 2011-07-17
+ kb9202 arm arm920t 5bd3814 2011-07-17
+ csb637 arm arm920t d14af08 2011-07-17
+ cmc_pu2 arm arm920t 37a9b4d 2011-07-17
+ at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net>
+ voiceblue arm arm925t 1b793a4 2011-07-17
+ smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de>
+ sbc2410x arm arm920t 1f7f0ed 2011-07-17
+ netstar arm arm925t 6ea2405 2011-07-17
+ mx1fs2 arm arm920t 6962419 2011-07-17
+ lpd7a404 arm lh7a40x 957731e 2011-07-17
+ edb9301 arm arm920t 716f7ad 2011-07-17
+ edb9302 arm arm920t 716f7ad 2011-07-17
+ edb9302a arm arm920t 716f7ad 2011-07-17
+ edb9307 arm arm920t 716f7ad 2011-07-17
+ edb9307a arm arm920t 716f7ad 2011-07-17
+ edb9312 arm arm920t 716f7ad 2011-07-17
+ edb9315 arm arm920t 716f7ad 2011-07-17
+ edb9315a arm arm920t 716f7ad 2011-07-17
+ B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
+ armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
+ assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com>
+ trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de>
+ xsengine ARM PXA2xx 4262a7c 2010-10-20
+ wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
+ delta ARM PXA2xx 75e2035 2010-10-20
+ mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric B??nard <eric@eukrea.com>
+ barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com>
+ ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de>
+ VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de>
+ NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
+ CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
+ logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at>
+ CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de>
+ PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de>
+ spieval powerpc MPC5200 69434e4 2010-09-19
+ smmaco4 powerpc MPC5200 9ddc3af 2010-09-19
+ HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de>
+ GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se>
+ AmigaOneG3SE powerpc 74xx_7xx 953b7e6 2010-06-23
+ suzaku microblaze - 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com>
+ XUPV2P microblaze - 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu>
+ MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de>
+ adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com>
+ R5200 ColdFire - 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com>
+ CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
++PCIPPC2 powerpc MPC740/MPC750 7c9e89b 2013-02-07 Wolfgang Denk <wd@denx.de>
+PCIPPC6 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de>
diff --cc include/configs/tegra-common.h
index 88acccf,4cc35e5..036ded0
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@@ -157,6 -167,7 +167,8 @@@
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SYS_GENERIC_BOARD
+ /* Misc utility code */
+ #define CONFIG_BOUNCE_BUFFER
#endif /* _TEGRA_COMMON_H_ */
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130318/9de2b73a/attachment.pgp>
next prev parent reply other threads:[~2013-03-18 17:06 UTC|newest]
Thread overview: 259+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-15 22:01 [U-Boot] Pull request: u-boot-arm/master Albert ARIBAUD
2013-03-16 8:19 ` Albert ARIBAUD
2013-03-17 19:40 ` Tom Rini
2013-03-18 17:06 ` Tom Rini [this message]
2013-03-18 17:43 ` Albert ARIBAUD
2013-03-18 18:38 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2016-01-31 20:40 Albert ARIBAUD
2016-02-01 16:54 ` Tom Rini
2015-11-10 17:45 Albert ARIBAUD
2015-11-10 20:15 ` Tom Rini
2015-10-15 21:19 Albert ARIBAUD
2015-10-15 22:00 ` Tom Rini
2015-07-31 1:06 Albert ARIBAUD
2015-08-01 14:47 ` Tom Rini
2015-07-06 15:20 Albert ARIBAUD
2015-07-06 21:15 ` Tom Rini
2015-07-06 22:09 ` Albert ARIBAUD
2015-07-06 23:59 ` Tom Rini
2015-07-07 5:49 ` Albert ARIBAUD
2015-07-07 10:01 ` Albert ARIBAUD
2015-07-02 21:27 Albert ARIBAUD
2015-07-02 22:55 ` Tom Rini
2015-07-05 14:11 ` Albert ARIBAUD
2015-05-05 9:30 Albert ARIBAUD
2015-05-05 23:59 ` Tom Rini
2015-01-04 18:11 Albert ARIBAUD
2015-01-05 15:10 ` Tom Rini
2014-11-24 17:30 Albert ARIBAUD
2014-11-24 22:13 ` Tom Rini
2014-11-13 7:54 Albert ARIBAUD
2014-11-08 0:07 Albert ARIBAUD
2014-11-10 21:28 ` Tom Rini
2014-10-11 0:38 Albert ARIBAUD
2014-10-11 11:49 ` Tom Rini
2014-10-07 11:16 Albert ARIBAUD
2014-10-07 16:02 ` Tom Rini
2014-09-17 21:40 Albert ARIBAUD
2014-09-18 1:00 ` Tom Rini
2014-09-12 13:42 Albert ARIBAUD
2014-09-12 19:15 ` Tom Rini
2014-07-29 13:08 Albert ARIBAUD
2014-07-29 14:30 ` Tom Rini
2014-07-05 8:18 Albert ARIBAUD
2014-07-05 16:48 ` Tom Rini
2014-07-04 22:57 Albert ARIBAUD
2014-07-05 0:20 ` Tom Rini
2014-07-02 20:33 Albert ARIBAUD
2014-07-02 22:38 ` Tom Rini
2014-06-08 7:51 Albert ARIBAUD
2014-06-09 2:25 ` Tom Rini
2014-05-30 15:20 Albert ARIBAUD
2014-05-30 17:59 ` Tom Rini
2014-05-24 9:32 Albert ARIBAUD
2014-05-24 20:37 ` Tom Rini
2014-05-20 8:57 Albert ARIBAUD
2014-05-22 19:12 ` Tom Rini
2014-05-09 9:56 Albert ARIBAUD
2014-05-09 16:15 ` Tom Rini
2014-04-08 11:40 Albert ARIBAUD
2014-04-08 16:39 ` Tom Rini
2014-03-10 18:16 Albert ARIBAUD
2014-03-10 21:27 ` Tom Rini
2014-02-26 21:40 Albert ARIBAUD
2014-02-26 23:39 ` Tom Rini
2014-02-13 17:43 Albert ARIBAUD
2014-02-18 17:50 ` Tom Rini
2014-02-18 18:21 ` Stephen Warren
2014-02-18 18:29 ` Tom Rini
2014-02-18 18:47 ` Albert ARIBAUD
2014-01-15 15:16 Albert ARIBAUD
2014-01-14 13:04 Albert ARIBAUD
2014-01-14 21:02 ` Tom Rini
2014-01-13 18:49 Albert ARIBAUD
2014-01-13 19:42 ` Tom Rini
2014-01-10 15:43 Albert ARIBAUD
2014-01-10 20:03 ` Tom Rini
2014-01-11 8:11 ` Albert ARIBAUD
2013-12-10 22:05 Albert ARIBAUD
2013-12-11 16:44 ` Tom Rini
2013-11-09 22:53 Albert ARIBAUD
2013-11-11 19:13 ` Tom Rini
2013-10-11 14:33 Albert ARIBAUD
2013-10-14 15:20 ` Tom Rini
2013-10-07 20:02 Albert ARIBAUD
2013-10-08 19:33 ` Tom Rini
2013-10-03 20:42 Albert ARIBAUD
2013-10-04 18:46 ` Tom Rini
2013-10-02 15:34 Albert ARIBAUD
2013-10-02 18:20 ` Tom Rini
2013-09-12 13:18 Albert ARIBAUD
2013-09-12 15:11 ` Tom Rini
2013-09-12 20:54 ` Albert ARIBAUD
2013-09-06 22:55 Albert ARIBAUD
2013-09-09 14:56 ` Tom Rini
2013-07-10 20:33 [U-Boot] pull " Albert ARIBAUD
2013-06-21 21:52 [U-Boot] Pull " Albert ARIBAUD
2013-06-24 20:17 ` Tom Rini
2013-06-13 15:49 Albert ARIBAUD
2013-06-14 15:11 ` Tom Rini
2013-06-05 15:02 [U-Boot] pull " Albert ARIBAUD
2013-06-07 18:20 ` Tom Rini
2013-05-30 19:29 [U-Boot] Pull " Albert ARIBAUD
2013-05-31 20:51 ` Tom Rini
2013-04-17 16:37 Albert ARIBAUD
2013-04-18 20:17 ` Tom Rini
2013-04-15 19:36 Albert ARIBAUD
2013-04-16 15:58 ` Tom Rini
2013-04-14 19:32 Albert ARIBAUD
2013-04-15 15:51 ` Tom Rini
2013-04-10 23:12 Albert ARIBAUD
2013-04-10 23:20 ` Benoît Thébaudeau
2013-04-11 6:10 ` Albert ARIBAUD
2013-03-28 20:06 Albert ARIBAUD
2013-03-29 0:01 ` Tom Rini
2013-02-12 14:25 Albert ARIBAUD
2013-02-15 16:33 ` Tom Rini
2013-01-14 16:58 Albert ARIBAUD
2013-01-14 23:18 ` Tom Rini
2013-01-11 21:36 Albert ARIBAUD
2013-01-11 23:44 ` Tom Rini
2013-01-09 14:43 Albert ARIBAUD
2013-01-09 19:35 ` Tom Rini
2013-01-08 15:07 Albert ARIBAUD
2013-01-08 20:50 ` Simon Glass
2013-01-08 21:01 ` Albert ARIBAUD
2013-01-08 21:06 ` Simon Glass
2013-01-08 22:34 ` Tom Rini
2012-12-22 12:11 Albert ARIBAUD
2012-12-22 15:20 ` Tom Rini
2013-01-03 6:41 ` Joonyoung Shim
2013-01-03 7:12 ` Lukasz Majewski
2012-11-04 21:51 Albert ARIBAUD
2012-11-05 16:54 ` Tom Rini
2012-11-05 19:45 ` Stephen Warren
2012-11-08 15:08 ` Tom Rini
2012-10-26 22:30 Albert ARIBAUD
2012-10-27 0:20 ` Tom Rini
2012-10-19 23:55 Albert ARIBAUD
2012-10-20 17:39 ` Tom Rini
2012-10-05 19:26 Albert ARIBAUD
2012-10-05 22:26 ` Tom Rini
2012-10-04 16:57 Albert ARIBAUD
2012-10-04 18:31 ` Tom Rini
2012-09-21 21:35 Albert ARIBAUD
2012-09-22 0:21 ` Tom Rini
2012-09-01 16:37 Albert ARIBAUD
2012-09-01 22:27 ` Wolfgang Denk
2012-07-10 6:30 Albert ARIBAUD
2012-07-10 7:04 ` Wolfgang Denk
2012-07-07 12:12 Albert ARIBAUD
2012-07-08 20:13 ` Wolfgang Denk
2012-05-15 6:57 Albert ARIBAUD
2012-05-20 20:33 ` Wolfgang Denk
2012-04-16 14:52 Albert ARIBAUD
2012-04-16 18:18 ` Marek Vasut
2012-04-16 20:09 ` Albert ARIBAUD
2012-04-16 20:15 ` Albert ARIBAUD
2012-04-17 5:33 ` Stefano Babic
2012-03-30 7:10 Albert ARIBAUD
2012-03-30 17:58 ` Wolfgang Denk
2012-02-27 20:23 Albert ARIBAUD
2012-03-03 14:09 ` Wolfgang Denk
2012-02-12 9:16 Albert ARIBAUD
2012-02-12 21:06 ` Wolfgang Denk
2012-01-16 8:16 Albert ARIBAUD
2012-01-17 21:36 ` Wolfgang Denk
2011-12-24 9:27 Albert ARIBAUD
2012-01-05 15:53 ` Wolfgang Denk
2011-12-19 16:55 Albert ARIBAUD
2011-12-20 21:40 ` Wolfgang Denk
2011-12-11 13:38 Albert ARIBAUD
2011-12-12 6:58 ` Wolfgang Denk
2011-12-09 16:42 Albert ARIBAUD
2011-12-10 21:54 ` Wolfgang Denk
2011-12-06 23:17 Albert ARIBAUD
2011-12-07 10:16 ` Wolfgang Denk
2011-11-15 21:28 Albert ARIBAUD
2011-11-16 0:04 ` Simon Glass
2011-11-16 2:27 ` Marek Vasut
2011-11-16 3:45 ` Simon Glass
2011-11-16 3:53 ` Mike Frysinger
2011-11-16 4:05 ` Simon Glass
2011-11-16 19:24 ` Wolfgang Denk
2011-11-17 13:45 ` Albert ARIBAUD
2011-11-17 21:39 ` Mike Frysinger
2011-11-17 21:56 ` Wolfgang Denk
2011-11-17 22:03 ` Albert ARIBAUD
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF1740D74CB5@HQMAIL01.nvidia.com>
[not found] ` <7E91C59574E9954FA075F8D8CCDF78DB38FE7FF7A9@HQMAIL04.nvidia.com>
2011-11-17 22:04 ` Simon Glass
2011-11-16 6:28 ` Heiko Schocher
2011-11-16 19:42 ` Wolfgang Denk
2011-11-07 20:58 Albert ARIBAUD
2011-11-08 0:02 ` Wolfgang Denk
2011-09-30 20:09 Albert ARIBAUD
2011-10-01 19:40 ` Wolfgang Denk
2011-10-04 5:35 ` Simon Glass
2011-10-21 18:44 ` Albert ARIBAUD
2011-10-21 19:12 ` Simon Glass
2011-09-28 6:38 Albert ARIBAUD
2011-09-28 18:42 ` Wolfgang Denk
2011-09-22 21:03 Albert ARIBAUD
2011-09-23 6:29 ` Wolfgang Denk
2011-09-14 6:57 Albert ARIBAUD
2011-09-15 12:24 ` Wolfgang Denk
2011-08-31 10:13 Albert ARIBAUD
2011-08-31 11:57 ` Marek Vasut
2011-09-01 8:59 ` Aneesh V
2011-09-03 19:26 ` Albert ARIBAUD
2011-09-04 8:44 ` Aneesh V
2011-09-04 9:01 ` Albert ARIBAUD
2011-09-04 9:02 ` Aneesh V
2011-09-04 9:12 ` Albert ARIBAUD
2011-09-04 9:17 ` Aneesh V
2011-08-04 12:28 Albert ARIBAUD
2011-07-18 13:38 Albert ARIBAUD
2011-07-18 14:31 ` Igor Grinberg
2011-07-18 17:52 ` Albert ARIBAUD
2011-08-12 8:21 ` Albert ARIBAUD
2011-07-18 19:17 ` Wolfgang Denk
2011-07-04 9:08 Albert ARIBAUD
2011-07-04 22:32 ` Wolfgang Denk
2011-06-30 6:24 Albert ARIBAUD
2011-06-30 11:15 ` Albert ARIBAUD
2011-06-28 5:39 Albert ARIBAUD
2011-06-28 9:52 ` Igor Grinberg
2011-06-28 10:20 ` Igor Grinberg
2011-06-28 21:19 ` Albert ARIBAUD
2011-06-28 10:48 ` Wolfgang Denk
2011-06-29 6:09 ` Albert ARIBAUD
2011-06-29 21:09 ` Wolfgang Denk
2011-06-21 20:28 Albert ARIBAUD
2011-06-22 9:17 ` Wolfgang Denk
2011-06-22 12:18 ` Wolfgang Denk
2011-06-22 13:51 ` Albert ARIBAUD
2011-06-08 20:41 Albert ARIBAUD
2011-06-08 21:32 ` Wolfgang Denk
2011-05-31 20:31 Albert ARIBAUD
2011-05-31 22:29 ` John Rigby
2011-06-01 17:15 ` Albert ARIBAUD
2011-06-01 20:15 ` Wolfgang Denk
2011-05-11 21:07 Albert ARIBAUD
2011-05-11 22:11 ` Rogan Dawes
2011-05-12 5:41 ` Albert ARIBAUD
2011-05-12 8:48 ` Prafulla Wadaskar
2011-05-12 9:06 ` Simon Guinot
2011-05-12 9:12 ` Simon Guinot
2011-05-12 17:27 ` Wolfgang Denk
2011-05-14 18:38 ` Dirk Behme
2011-04-28 16:14 Albert ARIBAUD
2011-04-28 21:17 ` Wolfgang Denk
2011-04-27 17:40 Albert ARIBAUD
2011-04-27 20:16 ` Wolfgang Denk
2011-04-27 23:42 ` Macpaul Lin
2011-04-28 21:14 ` Wolfgang Denk
2011-04-29 1:31 ` Macpaul Lin
2011-04-30 20:44 ` Wolfgang Denk
2011-05-02 8:46 ` Macpaul Lin
2011-05-02 10:31 ` Wolfgang Denk
2011-03-27 17:25 Albert ARIBAUD
2011-03-27 19:32 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130318170606.GA25919@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.