From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-arm/master
Date: Mon, 15 Apr 2013 11:51:18 -0400 [thread overview]
Message-ID: <20130415155118.GE31159@bill-the-cat> (raw)
In-Reply-To: <20130414213204.1f44a020@lilith>
On Sun, Apr 14, 2013 at 09:32:04PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> 785881f775252940185e10fbb2d5299c9ffa6bce:
>
> env: Add redundant env support to UBI env (2013-04-11 15:52:55 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 8960af8ba9488fc54e2e4733cbada26d3cece225:
>
> cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README (2013-04-14
> 17:04:43 +0200)
>
> ----------------------------------------------------------------
> Abbas Raza (1):
> mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a
> board
>
> Ajay Kumar (13):
> video: exynos_fb: Remove callbacks from the driver
> video: exynos_dp: Remove callbacks from the driver
> video: exynos_fb: Make fimd_ctrl global
> EXYNOS: FDT: Add compatible strings for FIMD
> video: exynos_fb: add DT support for FIMD driver
> EXYNOS5: Add device node for FIMD
> SMDK5250: Add device node for FIMD
> video: exynos_dp: Make dp_regs global
> EXYNOS5: FDT: Add compatible strings for FIMD
> video: exynos_dp: Add function to parse DP DT node
> EXYNOS5: Add device node for DP
> SMDK5250: Add device node for DP
> SMDK5250: Use statically defined structures only in non DT case
>
> Akshay Saraswat (8):
> Exynos: clock: Fix a bug in PLL lock check condition
> Exynos: Add hardware accelerated SHA256 and SHA1
> Exynos: config: Enable ACE HW for SHA 256 for Exynos
> gen: Add sha h/w acceleration to hash
> Exynos: config: Enable hash command
> Exynos5: clock: Fix a typo bug in exynos clock init
> Exynos5: config: enable time command
> Exynos: pwm: Remove dead code of function exynos5_get_pwm_clk
>
> Albert ARIBAUD (13):
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> ARM: Fix __bss_start and __bss_end in linker scripts
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> ARM: fix CONFIG_SPL_MAX_SIZE semantics
> cam_enc_4xx: convert to CONFIG_SPL_MAX_FOOTPRINT
> da850evm, da850_am18xxevm: convert to CONFIG_SPL_MAX_FOOTPRINT
> smdk5250, snow: convert to CONFIG_SPL_MAX_FOOTPRINT
> cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README
>
> Alexandre Pereira da Silva (1):
> mx23_olinuxino: Fix netboot console
>
> Andreas Bie??mann (6):
> omap3/cpu.h: add BCH support
> asm/omap_gpmc.h: consolidate common defines
> omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel
> omap_gpmc: change nandecc command
> omap_gpmc: add support for hw assisted BCH8
> tricorder: enable hw assisted BCH8 in SPL and u-boot
>
> Andrew Gabbasov (1):
> fsl_esdhc: Fix DMA transfer completion waiting loop
>
> Beno??t Th??baudeau (29):
> mx25pdk: Enable imxdi RTC
> nand: mxc: Prepare to add support for i.MX5
> nand: mxc: Add support for i.MX5
> imx: mx5: lowlevel_init: Simplify code
> imx: mx53ard: Add support for NAND Flash
> nand: mxc: Fix debug trace in mxc_nand_read_oob_syndrome()
> nand: mxc: Use appropriate page number in syndrome functions
> arm: start.S: Fix _TEXT_BASE for SPL
> arm: relocate_code() is no longer noreturn
> arm1136: Remove redundant relocate_code() return
> arm: relocate_code(): Remove useless relocation offset computation
> arm: relocate_code(): Use __image_copy_end for end of relocation
> arm: crt0.S: Remove bogus .globl
> autoconfig.mk: Make it possible to define configs from other
> configs Makefile: Change CONFIG_SPL_PAD_TO to image offset
> imx: Fix automatic make targets for imx images
> nand: mxc: Switch NAND SPL to generic SPL
> arm926ejs: Remove deprecated and now unused NAND SPL
> arm: Remove unused relocate_code() parameters
> Makefile: Move SHELL setup to config.mk
> .gitignore: Add /SPL
> imx: Add u-boot-with-spl.imx make target
> imx: Add u-boot-with-nand-spl.imx make target
> arm: Remove support for smdk6400
> Revert "mkconfig: start deprecating Makefile config targets"
> arm: Remove support for unused s3c64xx
> arm: Remove deprecated and now unused NAND SPL
> arm1176: Remove unused MMU setup from start.S
> arm: Make all linker scripts compatible with per-symbol sections
>
> Bin Liu (2):
> musb: am335x: disable bulk split-combine feature
> musb: set MUSB speed based on CONFIG
>
> Che-Liang Chiou (1):
> Exynos: Add timer_get_us function
>
> Dirk Behme (1):
> spi: mxc_spi: Fix ECSPI reset handling
>
> Eric Nelson (3):
> i.MX6: Add hdmidet command to detect attached HDMI monitor
> i.MX6: mx6qsabrelite: discard override of CONFIG_ARP_TIMEOUT
> fsl_esdhc: flush cache after IO completion
>
> Fabio Estevam (14):
> mxs: spl_mem_init: Align DDR2 init with FSL bootlets source
> configs: mx28evk: Use single-line comments
> mx28evk: Disable CONFIG_CMD_I2C
> Add initial support for Wandboard dual lite and solo.
> mx28evk: Introduce a new target for saving env vars to NAND
> mx6qsabrelite: README: No need to pass 'u-boot.imx'
> mx6: Fix get_board_rev() for the mx6 solo case
> wandboard: Remove duplicate 'mmc dev'
> mx6qsabrelite: Remove duplicate 'mmc dev'
> wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM
> mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
> mtd: nand: mxc_nand: Fix is_16bit_nand()
> mx31pdk: Remove watchdog support
> spi: mxc_spi: Set master mode for all channels
>
> Gabe Black (3):
> Exynos: pwm: Fix two bugs in the exynos pwm configuration code
> Exynos: Avoid a divide by zero by specifying a non-zero period
> for pwm 4 Exynos: Tidy up the pwm_config function in the exynos pwm
> driver
>
> Gerlando Falauto (1):
> kirkwood_nand: allow usage of NAND_ECC_SOFT_BCH
>
> Holger Brunck (3):
> arm/km: rename BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
> arm/km: use CONFIG_NAND_ECC_BCH
> arm/km: add support for kmsuv31 board
>
> Hunter, Jon (4):
> omap2420-h4: Fix DRAM initialisation
> omap2420-h4: Fix booting from NOR flash
> omap2420-h4: Add device tree support
> omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ
>
> Javier Martinez Canillas (1):
> i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe
> command
>
> Jon Hunter (5):
> omap5912-osk: Fix DRAM initialisation
> omap5912-osk: Fix booting from NOR flash
> omap5912-osk: Fix device initialisation
> omap5912-osk: Increase flash partition for u-boot
> omap5912-osk: Fix get_timer() and CONFIG_SYS_HZ
>
> Josh Wu (1):
> logo: update to the new logo for ATMEL
>
> Knut Wohlrab (1):
> imx-common: timer: fix 32-bit overflow
>
> Lars Poeschel (1):
> pcm051: Enable DDR PHY dynamic power down bit
>
> Linus Walleij (1):
> integrator: enable device tree
>
> Lokesh Vutla (1):
> arm: omap4: Fix SDRAM AUTO DETECTION
>
> Lubomir Popov (2):
> OMAP: Fix copy-paste bug that did not enable UART4 clock
> OMAP4: Fix bug in omap4460_volts struct
>
> Manfred Huber (1):
> omap3_beagle: Flush UART3 xmit on enable if TEMT is broken
>
> Minkyu Kang (1):
> exynos: change indentation of defines in cpu.h
>
> Nishanth Menon (1):
> omap5: Allow use of a plain text env file
>
> Otavio Salvador (5):
> mx6qsabresd: Document the mapping of USDHC[2-4]
> mx6qsabresd: Fix card detection for invalid card id case
> mx6qsabre{sd,auto}: Add boot mode select
> mx23_olinuxino: Change definitions to use spaces instead of tabs
> mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no
> arguments
>
> Padmavathi Venna (4):
> Exynos: Add peripherial id for pwm
> Exynos: clock: Add generic api to get the clk freq
> Exynos: clock: Correct pwm source clk selection
> Exynos: pwm: Use generic api to get pwm clk freq
>
> Przemyslaw Marczak (1):
> spl:falcon:trats: Fix SPL image size computing.
>
> Rajeshwari Shinde (1):
> EXYNOS5: Add L2 Cache Support.
>
> SRICHARAN R (4):
> ARM: OMAP5: Rename omap5_evm to omap5_uevm
> ARM: OMAP5: Set fdt_high to enable booting with Device tree
> ARM: OMAP4/5: Change the default boot command to work with device
> tree ARM: OMAP4/5: Make bootz as the default boot command
>
> Simon Glass (1):
> Exynos: Change get_timer() to work correctly
>
> Stephen Warren (1):
> ARM: bcm2835: fix get_timer() to return ms
>
> Tetsuyuki Kobayashi (1):
> BUGFIX: arm: data abort in get_bad_stack_swi
>
> Tom Rini (11):
> am335x: Enable MMC1 clock
> doc/feature-removal-schedule.txt: Add
> CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL OMAP3/4/5/AM33xx: Correct logic for
> checking FAT or RAW MMC omap5_uevm.h: Move uEVM-specific choices to
> omap5_uevm.h omap5_common.h: Use fallback CONFIG_SYS_BAUDRATE_TABLE
> am335x/ti814x: Correct MMC_BOOT_DEVICES_START/END
> am335x: Update timings for the beaglebone again
> omap5_uevm: Correct to 2MiB aligned partitions on eMMC
> am335x: Really correct DDR timings on new BeagleBone part
> omap5_common.h: Switch to ext4
> VCMA9: Enable CONFIG_CMD_NAND_YAFFS
>
> Vivek Gautam (2):
> SMDK5250: Fix compiler warning for non-dt systems
> spi: exynos: Fix compiler warnings for non-dt systems
>
> man.huber at arcor.de (1):
> omap3: Display MHz instead of mHz on the console
>
> .gitignore
> | 3 +
> MAINTAINERS
> | 5 +-
> Makefile
> | 40 ++----
> README
> | 43 ++++--
> arch/arm/config.mk
> | 2 -
> arch/arm/cpu/arm1136/config.mk
> | 7 +
> arch/arm/cpu/arm1136/omap24xx/timer.c
> | 8 +-
> arch/arm/cpu/arm1136/start.S
> | 31 ++--
> arch/arm/cpu/arm1136/u-boot-spl.lds
> | 2 +-
> arch/arm/cpu/arm1176/bcm2835/timer.c
> | 14 +-
> arch/arm/cpu/arm1176/s3c64xx/config.mk
> | 34 -----
> arch/arm/cpu/arm1176/s3c64xx/cpu_init.S |
> 135 -----------------
> arch/arm/cpu/arm1176/s3c64xx/init.c
> | 26 ----
> arch/arm/cpu/arm1176/s3c64xx/reset.S
> | 34 -----
> arch/arm/cpu/arm1176/s3c64xx/speed.c |
> 145 -------------------
> arch/arm/cpu/arm1176/s3c64xx/timer.c |
> 160 ---------------------
> arch/arm/cpu/arm1176/start.S |
> 131 +++--------------
> arch/arm/cpu/arm720t/start.S
> | 26 ++--
> arch/arm/cpu/arm920t/ep93xx/u-boot.lds
> | 13 +-
> arch/arm/cpu/arm920t/start.S
> | 28 ++--
> arch/arm/cpu/arm925t/start.S
> | 28 ++--
> arch/arm/cpu/arm926ejs/config.mk
> | 8 +-
> arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
> | 18 +--
> arch/arm/cpu/arm926ejs/mxs/start.S
> | 4 +
> arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
> | 6 +-
> arch/arm/cpu/arm926ejs/omap/timer.c
> | 15 +-
> arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
> | 6 +-
> arch/arm/cpu/arm926ejs/start.S
> | 40 ++----
> arch/arm/cpu/arm946es/start.S
> | 28 ++--
> arch/arm/cpu/arm_intcm/start.S
> | 30 ++--
> arch/arm/cpu/armv7/am33xx/clock_am33xx.c
> | 5 +
> arch/arm/cpu/armv7/am33xx/elm.c
> | 2 +-
> arch/arm/cpu/armv7/config.mk
> | 6 +
> arch/arm/cpu/armv7/exynos/clock.c |
> 167 ++++++++++++++++++---
> arch/arm/cpu/armv7/exynos/soc.c
> | 36 +++++
> arch/arm/cpu/armv7/mx5/lowlevel_init.S
> | 8 +-
> arch/arm/cpu/armv7/mx6/soc.c
> | 12 ++
> arch/arm/cpu/armv7/omap-common/clocks-common.c
> | 4 +-
> arch/arm/cpu/armv7/omap-common/emif-common.c
> | 29 ++--
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S
> | 10 +-
> arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
> | 2 +-
> arch/arm/cpu/armv7/omap3/board.c
> | 31 ++--
> arch/arm/cpu/armv7/omap3/sys_info.c
> | 4 +-
> arch/arm/cpu/armv7/omap4/emif.c
> | 1 -
> arch/arm/cpu/armv7/omap4/hw_data.c
> | 8 +-
> arch/arm/cpu/armv7/omap5/emif.c
> | 1 -
> arch/arm/cpu/armv7/s5p-common/pwm.c
> | 42 +++---
> arch/arm/cpu/armv7/s5p-common/timer.c |
> 117 +++++++--------
> arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
> | 2 +-
> arch/arm/cpu/armv7/start.S
> | 29 ++--
> arch/arm/cpu/ixp/start.S
> | 28 ++--
> arch/arm/cpu/ixp/u-boot.lds
> | 16 ++-
> arch/arm/cpu/pxa/start.S
> | 29 ++--
> arch/arm/cpu/s3c44b0/start.S
> | 28 ++--
> arch/arm/cpu/sa1100/start.S
> | 28 ++--
> arch/arm/cpu/u-boot-spl.lds
> | 24 ++--
> arch/arm/cpu/u-boot.lds
> | 18 +--
> arch/arm/dts/exynos5250.dtsi
> | 13 ++
> arch/arm/imx-common/Makefile
> | 18 +++ drivers/usb/host/s3c64xx-hcd.c =>
> arch/arm/imx-common/cmd_hdmidet.c | 32 ++---
> arch/arm/imx-common/timer.c
> | 26 +---
> arch/arm/include/asm/arch-am33xx/ddr_defs.h
> | 22 +--
> arch/arm/include/asm/arch-am33xx/omap_gpmc.h
> | 58 +-------
> arch/arm/include/asm/arch-am33xx/spl.h
> | 8 ++
> arch/arm/include/asm/arch-am33xx/sys_proto.h
> | 2 +-
> arch/arm/include/asm/arch-bcm2835/timer.h
> | 2 +
> arch/arm/include/asm/arch-exynos/clk.h
> | 15 ++
> arch/arm/include/asm/arch-exynos/cpu.h
> | 10 +-
> arch/arm/include/asm/arch-exynos/dp_info.h
> | 1 -
> arch/arm/include/asm/arch-exynos/periph.h
> | 5 +
> arch/arm/include/asm/arch-mx5/imx-regs.h
> | 1 +
> arch/arm/include/asm/arch-mx6/imx-regs.h
> | 1 +
> arch/arm/include/asm/arch-mx6/mx6dl_pins.h
> | 3 +
> arch/arm/include/asm/arch-omap24xx/omap2420.h
> | 6 +-
> arch/arm/include/asm/arch-omap3/cpu.h
> | 6 +
> arch/arm/include/asm/arch-omap3/omap_gpmc.h
> | 68 ++-------
> arch/arm/include/asm/arch-omap3/spl.h
> | 3 +
> arch/arm/include/asm/arch-omap3/sys_proto.h
> | 2 +-
> arch/arm/include/asm/arch-omap4/omap.h
> | 1 -
> arch/arm/include/asm/arch-omap4/spl.h
> | 2 +
> arch/arm/include/asm/arch-omap5/omap.h
> | 1 -
> arch/arm/include/asm/arch-omap5/spl.h
> | 2 +
> arch/arm/include/asm/arch-s3c64xx/hardware.h
> | 63 --------
> arch/arm/include/asm/arch-s3c64xx/s3c6400.h |
> 895
> -----------------------------------------------------------------------------------------------------------------
> arch/arm/include/asm/arch-s3c64xx/s3c64x0.h
> | 90 ------------
> arch/arm/include/asm/emif.h
> | 1 -
> arch/arm/include/asm/mach-types.h
> | 13 --
> arch/arm/include/asm/omap_gpmc.h
> | 87 +++++++++++
> arch/arm/lib/crt0.S
> | 52 ++-----
> board/actux1/u-boot.lds
> | 17 ++-
> board/actux2/u-boot.lds
> | 17 ++-
> board/actux3/u-boot.lds
> | 17 ++-
> board/ait/cam_enc_4xx/u-boot-spl.lds
> | 4 +-
> board/boundary/nitrogen6x/nitrogen6x.c
> | 8 +-
> board/davinci/da8xxevm/u-boot-spl-da850evm.lds
> | 4 +-
> board/davinci/da8xxevm/u-boot-spl-hawk.lds
> | 9 +-
> board/dvlhost/u-boot.lds
> | 17 ++-
> board/freescale/mx31ads/u-boot.lds
> | 32 +++--
> board/freescale/mx31pdk/Makefile
> | 3 +
> board/freescale/mx31pdk/config.mk
> | 5 -
> board/freescale/mx31pdk/mx31pdk.c
> | 8 ++
> board/freescale/mx53ard/mx53ard.c
> | 66 +++++++++
> board/freescale/mx6qsabreauto/mx6qsabreauto.c
> | 18 +++
> board/freescale/mx6qsabrelite/README
> | 4 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c
> | 8 +-
> board/freescale/mx6qsabresd/mx6qsabresd.c
> | 48 +++++--
> board/isee/igep00x0/igep00x0.c
> | 2 +-
> board/karo/tx25/Makefile
> | 4 +-
> board/karo/tx25/config.mk
> | 5 -
> board/karo/tx25/tx25.c
> | 8 ++
> board/overo/overo.c
> | 2 +-
> board/phytec/pcm051/board.c
> | 3 +-
> board/samsung/dts/exynos5250-smdk5250.dts
> | 40 ++++++
> board/samsung/smdk5250/clock_init.c
> | 22 +--
> board/samsung/smdk5250/setup.h
> | 2 +-
> board/samsung/smdk5250/smdk5250-uboot-spl.lds
> | 4 +-
> board/samsung/smdk5250/smdk5250.c
> | 19 ++-
> board/samsung/smdk6400/.gitignore
> | 5 -
> board/samsung/smdk6400/Makefile
> | 48 -------
> board/samsung/smdk6400/config.mk
> | 30 ----
> board/samsung/smdk6400/lowlevel_init.S |
> 323 -----------------------------------------
> board/samsung/smdk6400/smdk6400.c |
> 134 -----------------
> board/samsung/smdk6400/smdk6400_nand_spl.c
> | 37 -----
> board/samsung/smdk6400/u-boot-nand.lds
> | 86 -----------
> board/samsung/trats/trats.c
> | 6 +-
> board/samsung/universal_c210/universal.c
> | 23 +--
> board/ti/am335x/board.c
> | 2 +-
> board/ti/omap2420h4/config.mk
> | 4 +-
> board/ti/omap2420h4/mem.c
> | 13 --
> board/ti/omap2420h4/omap2420h4.c
> | 24 +++-
> board/ti/omap5912osk/config.mk
> | 12 +-
> board/ti/omap5912osk/lowlevel_init.S
> | 20 +++
> board/ti/omap5912osk/omap5912osk.c
> | 23 ++- board/ti/{omap5_evm =>
> omap5_uevm}/Makefile | 0
> board/ti/{omap5_evm => omap5_uevm}/evm.c
> | 0 board/ti/{omap5_evm =>
> omap5_uevm}/mux_data.h | 0
> board/vpac270/u-boot-spl.lds
> | 6 +-
> board/wandboard/Makefile
> | 29 ++++
> board/wandboard/README
> | 40 ++++++
> board/wandboard/wandboard.c |
> 178 +++++++++++++++++++++++
> boards.cfg
> | 10 +-
> common/hash.c
> | 18 +++
> config.mk
> | 7 +
> doc/README.arm-relocation
> | 14 +-
> doc/README.mx28evk
> | 18 +++
> doc/README.omap3
> | 28 ++++
> doc/README.scrapyard
> | 1 +
> doc/device-tree-bindings/video/exynos-dp.txt
> | 69 +++++++++
> doc/device-tree-bindings/video/exynos-fb.txt
> | 92 ++++++++++++
> doc/driver-model/UDM-serial.txt
> | 42 +++---
> doc/feature-removal-schedule.txt
> | 32 ++--- {arch/arm/cpu/arm1176/s3c64xx =>
> drivers/crypto}/Makefile | 27 ++--
> drivers/crypto/ace_sha.c |
> 126 ++++++++++++++++
> drivers/crypto/ace_sha.h |
> 325 +++++++++++++++++++++++++++++++++++++++++
> drivers/mmc/bcm2835_sdhci.c
> | 5 +-
> drivers/mmc/fsl_esdhc.c
> | 15 +-
> drivers/mtd/nand/Makefile
> | 2 +-
> drivers/mtd/nand/kirkwood_nand.c
> | 4 +
> drivers/mtd/nand/mxc_nand.c |
> 260 ++++++++++++++++++++-------------
> drivers/mtd/nand/mxc_nand.h |
> 225 +++++++++++++++++++++++++++++ nand_spl/nand_boot_fsl_nfc.c =>
> drivers/mtd/nand/mxc_nand_spl.c | 130 ++++++++++++-----
> drivers/mtd/nand/ndfc.c
> | 4 +-
> drivers/mtd/nand/omap_gpmc.c |
> 424 +++++++++++++++++++++++++++++++++++++++---------------
> drivers/mtd/nand/s3c64xx.c |
> 295 -------------------------------------
> drivers/mtd/onenand/onenand_base.c
> | 4 -
> drivers/mtd/onenand/samsung.c
> | 60 +-------
> drivers/serial/Makefile
> | 1 -
> drivers/serial/ns16550.c
> | 18 ++-
> drivers/serial/s3c64xx.c |
> 187 ------------------------
> drivers/serial/serial.c
> | 2 -
> drivers/spi/exynos_spi.c
> | 2 +
> drivers/spi/mxc_spi.c
> | 17 +--
> drivers/usb/host/Makefile
> | 1 -
> drivers/usb/host/ohci-hcd.c
> | 1 -
> drivers/usb/musb-new/musb_core.c
> | 7 +
> drivers/usb/musb-new/musb_uboot.c
> | 2 +-
> drivers/video/exynos_dp.c
> | 76 +++++++++-
> drivers/video/exynos_dp_lowlevel.c
> | 69 ++++-----
> drivers/video/exynos_dp_lowlevel.h
> | 1 +
> drivers/video/exynos_fb.c |
> 228 ++++++++++++++++++++++++++---
> drivers/video/exynos_fimd.c
> | 44 +++---
> include/common.h
> | 7 +-
> include/config_fallbacks.h
> | 16 +++
> include/configs/MPC8313ERDB.h
> | 2 +-
> include/configs/VCMA9.h
> | 1 +
> include/configs/am335x_evm.h
> | 1 +
> include/configs/cam_enc_4xx.h
> | 2 +-
> include/configs/da850evm.h
> | 2 +-
> include/configs/dra7xx_evm.h
> | 2 +
> include/configs/exynos5250-dt.h
> | 10 +-
> include/configs/igep00x0.h
> | 3 -
> include/configs/integrator-common.h
> | 1 +
> include/configs/km/km_arm.h
> | 5 +-
> include/configs/km_kirkwood.h
> | 8 ++
> include/configs/mx23_olinuxino.h |
> 162 ++++++++++-----------
> include/configs/mx25pdk.h
> | 4 +
> include/configs/mx28evk.h
> | 92 ++++++------
> include/configs/mx31pdk.h
> | 23 +--
> include/configs/mx53ard.h
> | 10 ++
> include/configs/mx6qsabre_common.h
> | 4 +-
> include/configs/mx6qsabrelite.h
> | 3 -
> include/configs/omap2420h4.h
> | 5 +-
> include/configs/omap4_common.h
> | 22 ++-
> include/configs/omap5912osk.h
> | 15 +-
> include/configs/omap5_common.h
> | 53 ++++--- include/configs/{omap5_evm.h =>
> omap5_uevm.h} | 17 +++
> include/configs/p1_p2_rdb_pc.h
> | 2 +-
> include/configs/rpi_b.h
> | 2 +-
> include/configs/smdk6400.h |
> 296 --------------------------------------
> include/configs/tegra-common.h
> | 2 +-
> include/configs/trats.h
> | 1 +
> include/configs/tricorder.h
> | 13 +-
> include/configs/tx25.h
> | 22 +--
> include/configs/wandboard.h |
> 209 +++++++++++++++++++++++++++
> include/fdtdec.h
> | 2 +
> include/fsl_esdhc.h
> | 5 +-
> include/fsl_nfc.h |
> 170 ----------------------
> include/hw_sha.h
> | 50 +++++++
> include/lcd.h
> | 9 --
> include/onenand_uboot.h
> | 4 -
> lib/Makefile
> | 2 +-
> lib/fdtdec.c
> | 2 +
> mkconfig
> | 9 --
> nand_spl/board/freescale/mx31pdk/Makefile
> | 63 --------
> nand_spl/board/freescale/mx31pdk/u-boot.lds
> | 87 -----------
> nand_spl/board/karo/tx25/Makefile
> | 84 -----------
> nand_spl/board/karo/tx25/config.mk
> | 1 -
> nand_spl/board/karo/tx25/u-boot.lds
> | 85 -----------
> nand_spl/board/samsung/smdk6400/Makefile |
> 117 ---------------
> nand_spl/board/samsung/smdk6400/config.mk
> | 40 ------
> nand_spl/board/samsung/smdk6400/u-boot.lds
> | 80 -----------
> tools/logos/atmel.bmp |
> Bin 26334 -> 15478 bytes
> tools/scripts/define2mk.sed
> | 2 + 233 files changed, 4058 insertions(+), 5369 deletions(-)
> delete mode 100644 arch/arm/cpu/arm1176/s3c64xx/config.mk delete mode
> 100644 arch/arm/cpu/arm1176/s3c64xx/cpu_init.S delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/init.c delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/reset.S delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/speed.c delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/timer.c rename
> drivers/usb/host/s3c64xx-hcd.c => arch/arm/imx-common/cmd_hdmidet.c
> (65%) delete mode 100644 arch/arm/include/asm/arch-s3c64xx/hardware.h
> delete mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c6400.h delete
> mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c64x0.h create mode
> 100644 arch/arm/include/asm/omap_gpmc.h delete mode 100644
> board/freescale/mx31pdk/config.mk delete mode 100644
> board/karo/tx25/config.mk delete mode 100644
> board/samsung/smdk6400/.gitignore delete mode 100644
> board/samsung/smdk6400/Makefile delete mode 100644
> board/samsung/smdk6400/config.mk delete mode 100644
> board/samsung/smdk6400/lowlevel_init.S delete mode 100644
> board/samsung/smdk6400/smdk6400.c delete mode 100644
> board/samsung/smdk6400/smdk6400_nand_spl.c delete mode 100644
> board/samsung/smdk6400/u-boot-nand.lds rename board/ti/{omap5_evm =>
> omap5_uevm}/Makefile (100%) rename board/ti/{omap5_evm =>
> omap5_uevm}/evm.c (100%) rename board/ti/{omap5_evm =>
> omap5_uevm}/mux_data.h (100%) create mode 100644
> board/wandboard/Makefile create mode 100644 board/wandboard/README
> create mode 100644 board/wandboard/wandboard.c create mode 100644
> doc/device-tree-bindings/video/exynos-dp.txt create mode 100644
> doc/device-tree-bindings/video/exynos-fb.txt rename
> {arch/arm/cpu/arm1176/s3c64xx => drivers/crypto}/Makefile (69%) create
> mode 100644 drivers/crypto/ace_sha.c create mode 100644
> drivers/crypto/ace_sha.h create mode 100644
> drivers/mtd/nand/mxc_nand.h rename nand_spl/nand_boot_fsl_nfc.c =>
> drivers/mtd/nand/mxc_nand_spl.c (65%) delete mode 100644
> drivers/mtd/nand/s3c64xx.c delete mode 100644 drivers/serial/s3c64xx.c
> rename include/configs/{omap5_evm.h => omap5_uevm.h} (71%) delete mode
> 100644 include/configs/smdk6400.h create mode 100644
> include/configs/wandboard.h delete mode 100644 include/fsl_nfc.h
> create mode 100644 include/hw_sha.h delete mode 100644
> nand_spl/board/freescale/mx31pdk/Makefile delete mode 100644
> nand_spl/board/freescale/mx31pdk/u-boot.lds delete mode 100644
> nand_spl/board/karo/tx25/Makefile delete mode 100644
> nand_spl/board/karo/tx25/config.mk delete mode 100644
> nand_spl/board/karo/tx25/u-boot.lds delete mode 100644
> nand_spl/board/samsung/smdk6400/Makefile delete mode 100644
> nand_spl/board/samsung/smdk6400/config.mk delete mode 100644
> nand_spl/board/samsung/smdk6400/u-boot.lds
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130415/bc858e68/attachment.pgp>
next prev parent reply other threads:[~2013-04-15 15:51 UTC|newest]
Thread overview: 259+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-14 19:32 [U-Boot] Pull request: u-boot-arm/master Albert ARIBAUD
2013-04-15 15:51 ` Tom Rini [this message]
-- strict thread matches above, loose matches on Subject: below --
2016-01-31 20:40 Albert ARIBAUD
2016-02-01 16:54 ` Tom Rini
2015-11-10 17:45 Albert ARIBAUD
2015-11-10 20:15 ` Tom Rini
2015-10-15 21:19 Albert ARIBAUD
2015-10-15 22:00 ` Tom Rini
2015-07-31 1:06 Albert ARIBAUD
2015-08-01 14:47 ` Tom Rini
2015-07-06 15:20 Albert ARIBAUD
2015-07-06 21:15 ` Tom Rini
2015-07-06 22:09 ` Albert ARIBAUD
2015-07-06 23:59 ` Tom Rini
2015-07-07 5:49 ` Albert ARIBAUD
2015-07-07 10:01 ` Albert ARIBAUD
2015-07-02 21:27 Albert ARIBAUD
2015-07-02 22:55 ` Tom Rini
2015-07-05 14:11 ` Albert ARIBAUD
2015-05-05 9:30 Albert ARIBAUD
2015-05-05 23:59 ` Tom Rini
2015-01-04 18:11 Albert ARIBAUD
2015-01-05 15:10 ` Tom Rini
2014-11-24 17:30 Albert ARIBAUD
2014-11-24 22:13 ` Tom Rini
2014-11-13 7:54 Albert ARIBAUD
2014-11-08 0:07 Albert ARIBAUD
2014-11-10 21:28 ` Tom Rini
2014-10-11 0:38 Albert ARIBAUD
2014-10-11 11:49 ` Tom Rini
2014-10-07 11:16 Albert ARIBAUD
2014-10-07 16:02 ` Tom Rini
2014-09-17 21:40 Albert ARIBAUD
2014-09-18 1:00 ` Tom Rini
2014-09-12 13:42 Albert ARIBAUD
2014-09-12 19:15 ` Tom Rini
2014-07-29 13:08 Albert ARIBAUD
2014-07-29 14:30 ` Tom Rini
2014-07-05 8:18 Albert ARIBAUD
2014-07-05 16:48 ` Tom Rini
2014-07-04 22:57 Albert ARIBAUD
2014-07-05 0:20 ` Tom Rini
2014-07-02 20:33 Albert ARIBAUD
2014-07-02 22:38 ` Tom Rini
2014-06-08 7:51 Albert ARIBAUD
2014-06-09 2:25 ` Tom Rini
2014-05-30 15:20 Albert ARIBAUD
2014-05-30 17:59 ` Tom Rini
2014-05-24 9:32 Albert ARIBAUD
2014-05-24 20:37 ` Tom Rini
2014-05-20 8:57 Albert ARIBAUD
2014-05-22 19:12 ` Tom Rini
2014-05-09 9:56 Albert ARIBAUD
2014-05-09 16:15 ` Tom Rini
2014-04-08 11:40 Albert ARIBAUD
2014-04-08 16:39 ` Tom Rini
2014-03-10 18:16 Albert ARIBAUD
2014-03-10 21:27 ` Tom Rini
2014-02-26 21:40 Albert ARIBAUD
2014-02-26 23:39 ` Tom Rini
2014-02-13 17:43 Albert ARIBAUD
2014-02-18 17:50 ` Tom Rini
2014-02-18 18:21 ` Stephen Warren
2014-02-18 18:29 ` Tom Rini
2014-02-18 18:47 ` Albert ARIBAUD
2014-01-15 15:16 Albert ARIBAUD
2014-01-14 13:04 Albert ARIBAUD
2014-01-14 21:02 ` Tom Rini
2014-01-13 18:49 Albert ARIBAUD
2014-01-13 19:42 ` Tom Rini
2014-01-10 15:43 Albert ARIBAUD
2014-01-10 20:03 ` Tom Rini
2014-01-11 8:11 ` Albert ARIBAUD
2013-12-10 22:05 Albert ARIBAUD
2013-12-11 16:44 ` Tom Rini
2013-11-09 22:53 Albert ARIBAUD
2013-11-11 19:13 ` Tom Rini
2013-10-11 14:33 Albert ARIBAUD
2013-10-14 15:20 ` Tom Rini
2013-10-07 20:02 Albert ARIBAUD
2013-10-08 19:33 ` Tom Rini
2013-10-03 20:42 Albert ARIBAUD
2013-10-04 18:46 ` Tom Rini
2013-10-02 15:34 Albert ARIBAUD
2013-10-02 18:20 ` Tom Rini
2013-09-12 13:18 Albert ARIBAUD
2013-09-12 15:11 ` Tom Rini
2013-09-12 20:54 ` Albert ARIBAUD
2013-09-06 22:55 Albert ARIBAUD
2013-09-09 14:56 ` Tom Rini
2013-07-10 20:33 [U-Boot] pull " Albert ARIBAUD
2013-06-21 21:52 [U-Boot] Pull " Albert ARIBAUD
2013-06-24 20:17 ` Tom Rini
2013-06-13 15:49 Albert ARIBAUD
2013-06-14 15:11 ` Tom Rini
2013-06-05 15:02 [U-Boot] pull " Albert ARIBAUD
2013-06-07 18:20 ` Tom Rini
2013-05-30 19:29 [U-Boot] Pull " Albert ARIBAUD
2013-05-31 20:51 ` Tom Rini
2013-04-17 16:37 Albert ARIBAUD
2013-04-18 20:17 ` Tom Rini
2013-04-15 19:36 Albert ARIBAUD
2013-04-16 15:58 ` Tom Rini
2013-04-10 23:12 Albert ARIBAUD
2013-04-10 23:20 ` Benoît Thébaudeau
2013-04-11 6:10 ` Albert ARIBAUD
2013-03-28 20:06 Albert ARIBAUD
2013-03-29 0:01 ` Tom Rini
2013-03-15 22:01 Albert ARIBAUD
2013-03-16 8:19 ` Albert ARIBAUD
2013-03-17 19:40 ` Tom Rini
2013-03-18 17:06 ` Tom Rini
2013-03-18 17:43 ` Albert ARIBAUD
2013-03-18 18:38 ` Tom Rini
2013-02-12 14:25 Albert ARIBAUD
2013-02-15 16:33 ` Tom Rini
2013-01-14 16:58 Albert ARIBAUD
2013-01-14 23:18 ` Tom Rini
2013-01-11 21:36 Albert ARIBAUD
2013-01-11 23:44 ` Tom Rini
2013-01-09 14:43 Albert ARIBAUD
2013-01-09 19:35 ` Tom Rini
2013-01-08 15:07 Albert ARIBAUD
2013-01-08 20:50 ` Simon Glass
2013-01-08 21:01 ` Albert ARIBAUD
2013-01-08 21:06 ` Simon Glass
2013-01-08 22:34 ` Tom Rini
2012-12-22 12:11 Albert ARIBAUD
2012-12-22 15:20 ` Tom Rini
2013-01-03 6:41 ` Joonyoung Shim
2013-01-03 7:12 ` Lukasz Majewski
2012-11-04 21:51 Albert ARIBAUD
2012-11-05 16:54 ` Tom Rini
2012-11-05 19:45 ` Stephen Warren
2012-11-08 15:08 ` Tom Rini
2012-10-26 22:30 Albert ARIBAUD
2012-10-27 0:20 ` Tom Rini
2012-10-19 23:55 Albert ARIBAUD
2012-10-20 17:39 ` Tom Rini
2012-10-05 19:26 Albert ARIBAUD
2012-10-05 22:26 ` Tom Rini
2012-10-04 16:57 Albert ARIBAUD
2012-10-04 18:31 ` Tom Rini
2012-09-21 21:35 Albert ARIBAUD
2012-09-22 0:21 ` Tom Rini
2012-09-01 16:37 Albert ARIBAUD
2012-09-01 22:27 ` Wolfgang Denk
2012-07-10 6:30 Albert ARIBAUD
2012-07-10 7:04 ` Wolfgang Denk
2012-07-07 12:12 Albert ARIBAUD
2012-07-08 20:13 ` Wolfgang Denk
2012-05-15 6:57 Albert ARIBAUD
2012-05-20 20:33 ` Wolfgang Denk
2012-04-16 14:52 Albert ARIBAUD
2012-04-16 18:18 ` Marek Vasut
2012-04-16 20:09 ` Albert ARIBAUD
2012-04-16 20:15 ` Albert ARIBAUD
2012-04-17 5:33 ` Stefano Babic
2012-03-30 7:10 Albert ARIBAUD
2012-03-30 17:58 ` Wolfgang Denk
2012-02-27 20:23 Albert ARIBAUD
2012-03-03 14:09 ` Wolfgang Denk
2012-02-12 9:16 Albert ARIBAUD
2012-02-12 21:06 ` Wolfgang Denk
2012-01-16 8:16 Albert ARIBAUD
2012-01-17 21:36 ` Wolfgang Denk
2011-12-24 9:27 Albert ARIBAUD
2012-01-05 15:53 ` Wolfgang Denk
2011-12-19 16:55 Albert ARIBAUD
2011-12-20 21:40 ` Wolfgang Denk
2011-12-11 13:38 Albert ARIBAUD
2011-12-12 6:58 ` Wolfgang Denk
2011-12-09 16:42 Albert ARIBAUD
2011-12-10 21:54 ` Wolfgang Denk
2011-12-06 23:17 Albert ARIBAUD
2011-12-07 10:16 ` Wolfgang Denk
2011-11-15 21:28 Albert ARIBAUD
2011-11-16 0:04 ` Simon Glass
2011-11-16 2:27 ` Marek Vasut
2011-11-16 3:45 ` Simon Glass
2011-11-16 3:53 ` Mike Frysinger
2011-11-16 4:05 ` Simon Glass
2011-11-16 19:24 ` Wolfgang Denk
2011-11-17 13:45 ` Albert ARIBAUD
2011-11-17 21:39 ` Mike Frysinger
2011-11-17 21:56 ` Wolfgang Denk
2011-11-17 22:03 ` Albert ARIBAUD
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF1740D74CB5@HQMAIL01.nvidia.com>
[not found] ` <7E91C59574E9954FA075F8D8CCDF78DB38FE7FF7A9@HQMAIL04.nvidia.com>
2011-11-17 22:04 ` Simon Glass
2011-11-16 6:28 ` Heiko Schocher
2011-11-16 19:42 ` Wolfgang Denk
2011-11-07 20:58 Albert ARIBAUD
2011-11-08 0:02 ` Wolfgang Denk
2011-09-30 20:09 Albert ARIBAUD
2011-10-01 19:40 ` Wolfgang Denk
2011-10-04 5:35 ` Simon Glass
2011-10-21 18:44 ` Albert ARIBAUD
2011-10-21 19:12 ` Simon Glass
2011-09-28 6:38 Albert ARIBAUD
2011-09-28 18:42 ` Wolfgang Denk
2011-09-22 21:03 Albert ARIBAUD
2011-09-23 6:29 ` Wolfgang Denk
2011-09-14 6:57 Albert ARIBAUD
2011-09-15 12:24 ` Wolfgang Denk
2011-08-31 10:13 Albert ARIBAUD
2011-08-31 11:57 ` Marek Vasut
2011-09-01 8:59 ` Aneesh V
2011-09-03 19:26 ` Albert ARIBAUD
2011-09-04 8:44 ` Aneesh V
2011-09-04 9:01 ` Albert ARIBAUD
2011-09-04 9:02 ` Aneesh V
2011-09-04 9:12 ` Albert ARIBAUD
2011-09-04 9:17 ` Aneesh V
2011-08-04 12:28 Albert ARIBAUD
2011-07-18 13:38 Albert ARIBAUD
2011-07-18 14:31 ` Igor Grinberg
2011-07-18 17:52 ` Albert ARIBAUD
2011-08-12 8:21 ` Albert ARIBAUD
2011-07-18 19:17 ` Wolfgang Denk
2011-07-04 9:08 Albert ARIBAUD
2011-07-04 22:32 ` Wolfgang Denk
2011-06-30 6:24 Albert ARIBAUD
2011-06-30 11:15 ` Albert ARIBAUD
2011-06-28 5:39 Albert ARIBAUD
2011-06-28 9:52 ` Igor Grinberg
2011-06-28 10:20 ` Igor Grinberg
2011-06-28 21:19 ` Albert ARIBAUD
2011-06-28 10:48 ` Wolfgang Denk
2011-06-29 6:09 ` Albert ARIBAUD
2011-06-29 21:09 ` Wolfgang Denk
2011-06-21 20:28 Albert ARIBAUD
2011-06-22 9:17 ` Wolfgang Denk
2011-06-22 12:18 ` Wolfgang Denk
2011-06-22 13:51 ` Albert ARIBAUD
2011-06-08 20:41 Albert ARIBAUD
2011-06-08 21:32 ` Wolfgang Denk
2011-05-31 20:31 Albert ARIBAUD
2011-05-31 22:29 ` John Rigby
2011-06-01 17:15 ` Albert ARIBAUD
2011-06-01 20:15 ` Wolfgang Denk
2011-05-11 21:07 Albert ARIBAUD
2011-05-11 22:11 ` Rogan Dawes
2011-05-12 5:41 ` Albert ARIBAUD
2011-05-12 8:48 ` Prafulla Wadaskar
2011-05-12 9:06 ` Simon Guinot
2011-05-12 9:12 ` Simon Guinot
2011-05-12 17:27 ` Wolfgang Denk
2011-05-14 18:38 ` Dirk Behme
2011-04-28 16:14 Albert ARIBAUD
2011-04-28 21:17 ` Wolfgang Denk
2011-04-27 17:40 Albert ARIBAUD
2011-04-27 20:16 ` Wolfgang Denk
2011-04-27 23:42 ` Macpaul Lin
2011-04-28 21:14 ` Wolfgang Denk
2011-04-29 1:31 ` Macpaul Lin
2011-04-30 20:44 ` Wolfgang Denk
2011-05-02 8:46 ` Macpaul Lin
2011-05-02 10:31 ` Wolfgang Denk
2011-03-27 17:25 Albert ARIBAUD
2011-03-27 19:32 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130415155118.GE31159@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.