From: Simon Glass <sjg@chromium.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 04/15] Move debug and logging support to a separate header
Date: Mon, 4 Dec 2017 13:48:20 -0700 [thread overview]
Message-ID: <20171204204831.98915-5-sjg@chromium.org> (raw)
In-Reply-To: <20171204204831.98915-1-sjg@chromium.org>
Before adding new features, move these definitions to a separate header
to avoid further cluttering common.h.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
include/common.h | 46 +------------------------------------------
include/log.h | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+), 45 deletions(-)
create mode 100644 include/log.h
diff --git a/include/common.h b/include/common.h
index 6e24545178..436200044f 100644
--- a/include/common.h
+++ b/include/common.h
@@ -45,51 +45,7 @@ typedef volatile unsigned char vu_char;
#define CONFIG_SYS_SUPPORT_64BIT_DATA
#endif
-#ifdef DEBUG
-#define _DEBUG 1
-#else
-#define _DEBUG 0
-#endif
-
-#ifdef CONFIG_SPL_BUILD
-#define _SPL_BUILD 1
-#else
-#define _SPL_BUILD 0
-#endif
-
-/*
- * Output a debug text when condition "cond" is met. The "cond" should be
- * computed by a preprocessor in the best case, allowing for the best
- * optimization.
- */
-#define debug_cond(cond, fmt, args...) \
- do { \
- if (cond) \
- printf(pr_fmt(fmt), ##args); \
- } while (0)
-
-/* Show a message if DEBUG is defined in a file */
-#define debug(fmt, args...) \
- debug_cond(_DEBUG, fmt, ##args)
-
-/* Show a message if not in SPL */
-#define warn_non_spl(fmt, args...) \
- debug_cond(!_SPL_BUILD, fmt, ##args)
-
-/*
- * An assertion is run-time check done in debug mode only. If DEBUG is not
- * defined then it is skipped. If DEBUG is defined and the assertion fails,
- * then it calls panic*( which may or may not reset/halt U-Boot (see
- * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
- * before release, and after release it is hoped that they don't matter. But
- * in any case these failing assertions cannot be fixed with a reset (which
- * may just do the same assertion again).
- */
-void __assert_fail(const char *assertion, const char *file, unsigned line,
- const char *function);
-#define assert(x) \
- ({ if (!(x) && _DEBUG) \
- __assert_fail(#x, __FILE__, __LINE__, __func__); })
+#include <log.h>
typedef void (interrupt_handler_t)(void *);
diff --git a/include/log.h b/include/log.h
new file mode 100644
index 0000000000..08ad44cf49
--- /dev/null
+++ b/include/log.h
@@ -0,0 +1,59 @@
+/*
+ * Logging support
+ *
+ * Copyright (c) 2017 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LOG_H
+#define __LOG_H
+
+#ifdef DEBUG
+#define _DEBUG 1
+#else
+#define _DEBUG 0
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+#define _SPL_BUILD 1
+#else
+#define _SPL_BUILD 0
+#endif
+
+/*
+ * Output a debug text when condition "cond" is met. The "cond" should be
+ * computed by a preprocessor in the best case, allowing for the best
+ * optimization.
+ */
+#define debug_cond(cond, fmt, args...) \
+ do { \
+ if (cond) \
+ printf(pr_fmt(fmt), ##args); \
+ } while (0)
+
+/* Show a message if DEBUG is defined in a file */
+#define debug(fmt, args...) \
+ debug_cond(_DEBUG, fmt, ##args)
+
+/* Show a message if not in SPL */
+#define warn_non_spl(fmt, args...) \
+ debug_cond(!_SPL_BUILD, fmt, ##args)
+
+/*
+ * An assertion is run-time check done in debug mode only. If DEBUG is not
+ * defined then it is skipped. If DEBUG is defined and the assertion fails,
+ * then it calls panic*( which may or may not reset/halt U-Boot (see
+ * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
+ * before release, and after release it is hoped that they don't matter. But
+ * in any case these failing assertions cannot be fixed with a reset (which
+ * may just do the same assertion again).
+ */
+void __assert_fail(const char *assertion, const char *file, unsigned int line,
+ const char *function);
+#define assert(x) \
+ ({ if (!(x) && _DEBUG) \
+ __assert_fail(#x, __FILE__, __LINE__, __func__); })
+
+#endif
--
2.15.0.531.g2ccb3012c9-goog
next prev parent reply other threads:[~2017-12-04 20:48 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-04 20:48 [U-Boot] [PATCH v4 00/15] log: Add a new logging feature Simon Glass
2017-12-04 20:48 ` [U-Boot] [PATCH v4 01/15] Revert "sandbox: remove os_putc() and os_puts()" Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 02/15] sandbox: Adjust pre-console address to avoid conflict Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 03/15] Revert "sandbox: Drop special case console code for sandbox" Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-12-04 20:48 ` Simon Glass [this message]
2017-12-07 22:54 ` [U-Boot] [U-Boot, v4, 04/15] Move debug and logging support to a separate header Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 05/15] mtdparts: Correct use of debug() Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,05/15] " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 06/15] usb: " Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,06/15] " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 07/15] Drop the log buffer Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,07/15] " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 08/15] log: Add an implementation of logging Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 09/15] log: Add a console driver Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,09/15] " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 10/15] log: Add a 'log level' command Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,10/15] " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 11/15] log: Add a test command Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,11/15] " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 12/15] log: Plumb logging into the init sequence Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 13/15] log: sandbox: Enable logging Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,13/15] " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 14/15] log: test: Add a pytest for logging Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,14/15] " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 15/15] log: Add documentation Simon Glass
2017-12-07 22:55 ` [U-Boot] [U-Boot,v4,15/15] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171204204831.98915-5-sjg@chromium.org \
--to=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.