From: Simon Glass <sjg@chromium.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 07/15] Drop the log buffer
Date: Mon, 4 Dec 2017 13:48:23 -0700 [thread overview]
Message-ID: <20171204204831.98915-8-sjg@chromium.org> (raw)
In-Reply-To: <20171204204831.98915-1-sjg@chromium.org>
This does not appear to be used by any boards. Before introducing a new
log system, remove this old one.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
cmd/Makefile | 1 -
cmd/log.c | 313 --------------------------------------
common/board_f.c | 18 ---
common/board_r.c | 25 +--
common/image.c | 9 --
common/stdio.c | 6 -
include/asm-generic/global_data.h | 2 +-
include/logbuff.h | 49 ------
include/post.h | 4 +-
post/post.c | 9 --
post/tests.c | 4 -
scripts/config_whitelist.txt | 1 -
12 files changed, 5 insertions(+), 436 deletions(-)
delete mode 100644 cmd/log.c
delete mode 100644 include/logbuff.h
diff --git a/cmd/Makefile b/cmd/Makefile
index 2b0444d5b7..f9eb76090d 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -76,7 +76,6 @@ obj-$(CONFIG_LED_STATUS_CMD) += legacy_led.o
obj-$(CONFIG_CMD_LED) += led.o
obj-$(CONFIG_CMD_LICENSE) += license.o
obj-y += load.o
-obj-$(CONFIG_LOGBUFFER) += log.o
obj-$(CONFIG_ID_EEPROM) += mac.o
obj-$(CONFIG_CMD_MD5SUM) += md5sum.o
obj-$(CONFIG_CMD_MEMORY) += mem.o
diff --git a/cmd/log.c b/cmd/log.c
deleted file mode 100644
index 7a3bd5cd69..0000000000
--- a/cmd/log.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * (C) Copyright 2002-2007
- * Detlev Zundel, DENX Software Engineering, dzu at denx.de.
- *
- * Code used from linux/kernel/printk.c
- * Copyright (C) 1991, 1992 Linus Torvalds
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Comments:
- *
- * After relocating the code, the environment variable "loglevel" is
- * copied to console_loglevel. The functionality is similar to the
- * handling in the Linux kernel, i.e. messages logged with a priority
- * less than console_loglevel are also output to stdout.
- *
- * If you want messages with the default level (e.g. POST messages) to
- * appear on stdout also, make sure the environment variable
- * "loglevel" is set at boot time to a number higher than
- * default_message_loglevel below.
- */
-
-/*
- * Logbuffer handling routines
- */
-
-#include <common.h>
-#include <command.h>
-#include <stdio_dev.h>
-#include <post.h>
-#include <logbuff.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Local prototypes */
-static void logbuff_putc(struct stdio_dev *dev, const char c);
-static void logbuff_puts(struct stdio_dev *dev, const char *s);
-static int logbuff_printk(const char *line);
-
-static char buf[1024];
-
-/* This combination will not print messages with the default loglevel */
-static unsigned console_loglevel = 3;
-static unsigned default_message_loglevel = 4;
-static unsigned log_version = 1;
-#ifdef CONFIG_ALT_LB_ADDR
-static volatile logbuff_t *log;
-#else
-static logbuff_t *log;
-#endif
-static char *lbuf;
-
-unsigned long __logbuffer_base(void)
-{
- return CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN;
-}
-unsigned long logbuffer_base(void)
-__attribute__((weak, alias("__logbuffer_base")));
-
-void logbuff_init_ptrs(void)
-{
- unsigned long tag, post_word;
- char *s;
-
-#ifdef CONFIG_ALT_LB_ADDR
- log = (logbuff_t *)CONFIG_ALT_LH_ADDR;
- lbuf = (char *)CONFIG_ALT_LB_ADDR;
-#else
- log = (logbuff_t *)(logbuffer_base()) - 1;
- lbuf = (char *)log->buf;
-#endif
-
- /* Set up log version */
- s = env_get("logversion");
- if (s)
- log_version = (int)simple_strtoul(s, NULL, 10);
-
- if (log_version == 2)
- tag = log->v2.tag;
- else
- tag = log->v1.tag;
- post_word = post_word_load();
-#ifdef CONFIG_POST
- /* The post routines have setup the word so we can simply test it */
- if (tag != LOGBUFF_MAGIC || (post_word & POST_COLDBOOT))
- logbuff_reset();
-#else
- /* No post routines, so we do our own checking */
- if (tag != LOGBUFF_MAGIC || post_word != LOGBUFF_MAGIC) {
- logbuff_reset ();
- post_word_store (LOGBUFF_MAGIC);
- }
-#endif
- if (log_version == 2 && (long)log->v2.start > (long)log->v2.con)
- log->v2.start = log->v2.con;
-
- /* Initialize default loglevel if present */
- s = env_get("loglevel");
- if (s)
- console_loglevel = (int)simple_strtoul(s, NULL, 10);
-
- gd->flags |= GD_FLG_LOGINIT;
-}
-
-void logbuff_reset(void)
-{
-#ifndef CONFIG_ALT_LB_ADDR
- memset(log, 0, sizeof(logbuff_t));
-#endif
- if (log_version == 2) {
- log->v2.tag = LOGBUFF_MAGIC;
-#ifdef CONFIG_ALT_LB_ADDR
- log->v2.start = 0;
- log->v2.con = 0;
- log->v2.end = 0;
- log->v2.chars = 0;
-#endif
- } else {
- log->v1.tag = LOGBUFF_MAGIC;
-#ifdef CONFIG_ALT_LB_ADDR
- log->v1.dummy = 0;
- log->v1.start = 0;
- log->v1.size = 0;
- log->v1.chars = 0;
-#endif
- }
-}
-
-int drv_logbuff_init(void)
-{
- struct stdio_dev logdev;
- int rc;
-
- /* Device initialization */
- memset (&logdev, 0, sizeof (logdev));
-
- strcpy (logdev.name, "logbuff");
- logdev.ext = 0; /* No extensions */
- logdev.flags = DEV_FLAGS_OUTPUT; /* Output only */
- logdev.putc = logbuff_putc; /* 'putc' function */
- logdev.puts = logbuff_puts; /* 'puts' function */
-
- rc = stdio_register(&logdev);
-
- return (rc == 0) ? 1 : rc;
-}
-
-static void logbuff_putc(struct stdio_dev *dev, const char c)
-{
- char buf[2];
- buf[0] = c;
- buf[1] = '\0';
- logbuff_printk(buf);
-}
-
-static void logbuff_puts(struct stdio_dev *dev, const char *s)
-{
- logbuff_printk (s);
-}
-
-void logbuff_log(char *msg)
-{
- if ((gd->flags & GD_FLG_LOGINIT)) {
- logbuff_printk(msg);
- } else {
- /*
- * Can happen only for pre-relocated errors as logging
- * at that stage should be disabled
- */
- puts (msg);
- }
-}
-
-/*
- * Subroutine: do_log
- *
- * Description: Handler for 'log' command..
- *
- * Inputs: argv[1] contains the subcommand
- *
- * Return: None
- *
- */
-int do_log(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- struct stdio_dev *sdev = NULL;
- char *s;
- unsigned long i, start, size;
-
- if (strcmp(argv[1], "append") == 0) {
- /* Log concatenation of all arguments separated by spaces */
- for (i = 2; i < argc; i++) {
- logbuff_printk(argv[i]);
- logbuff_putc(sdev, (i < argc - 1) ? ' ' : '\n');
- }
- return 0;
- }
-
- switch (argc) {
-
- case 2:
- if (strcmp(argv[1], "show") == 0) {
- if (log_version == 2) {
- start = log->v2.start;
- size = log->v2.end - log->v2.start;
- } else {
- start = log->v1.start;
- size = log->v1.size;
- }
- if (size > LOGBUFF_LEN)
- size = LOGBUFF_LEN;
- for (i = 0; i < size; i++) {
- s = lbuf + ((start + i) & LOGBUFF_MASK);
- putc(*s);
- }
- return 0;
- } else if (strcmp(argv[1], "reset") == 0) {
- logbuff_reset();
- return 0;
- } else if (strcmp(argv[1], "info") == 0) {
- printf("Logbuffer @ %08lx\n", (unsigned long)lbuf);
- if (log_version == 2) {
- printf("log_start = %08lx\n",
- log->v2.start);
- printf("log_end = %08lx\n", log->v2.end);
- printf("log_con = %08lx\n", log->v2.con);
- printf("logged_chars = %08lx\n",
- log->v2.chars);
- }
- else {
- printf("log_start = %08lx\n",
- log->v1.start);
- printf("log_size = %08lx\n",
- log->v1.size);
- printf("logged_chars = %08lx\n",
- log->v1.chars);
- }
- return 0;
- }
- return CMD_RET_USAGE;
-
- default:
- return CMD_RET_USAGE;
- }
-}
-
-U_BOOT_CMD(
- log, 255, 1, do_log,
- "manipulate logbuffer",
- "info - show pointer details\n"
- "log reset - clear contents\n"
- "log show - show contents\n"
- "log append <msg> - append <msg> to the logbuffer"
-);
-
-static int logbuff_printk(const char *line)
-{
- int i;
- char *msg, *p, *buf_end;
- int line_feed;
- static signed char msg_level = -1;
-
- strcpy(buf + 3, line);
- i = strlen(line);
- buf_end = buf + 3 + i;
- for (p = buf + 3; p < buf_end; p++) {
- msg = p;
- if (msg_level < 0) {
- if (
- p[0] != '<' ||
- p[1] < '0' ||
- p[1] > '7' ||
- p[2] != '>'
- ) {
- p -= 3;
- p[0] = '<';
- p[1] = default_message_loglevel + '0';
- p[2] = '>';
- } else {
- msg += 3;
- }
- msg_level = p[1] - '0';
- }
- line_feed = 0;
- for (; p < buf_end; p++) {
- if (log_version == 2) {
- lbuf[log->v2.end & LOGBUFF_MASK] = *p;
- log->v2.end++;
- if (log->v2.end - log->v2.start > LOGBUFF_LEN)
- log->v2.start++;
- log->v2.chars++;
- } else {
- lbuf[(log->v1.start + log->v1.size) &
- LOGBUFF_MASK] = *p;
- if (log->v1.size < LOGBUFF_LEN)
- log->v1.size++;
- else
- log->v1.start++;
- log->v1.chars++;
- }
- if (*p == '\n') {
- line_feed = 1;
- break;
- }
- }
- if (msg_level < console_loglevel) {
- printf("%s", msg);
- }
- if (line_feed)
- msg_level = -1;
- }
- return i;
-}
diff --git a/common/board_f.c b/common/board_f.c
index 9220815441..1e8bf63ec1 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -19,7 +19,6 @@
#include <i2c.h>
#include <initcall.h>
#include <init_helpers.h>
-#include <logbuff.h>
#include <malloc.h>
#include <mapmem.h>
#include <os.h>
@@ -296,20 +295,6 @@ static int setup_dest_addr(void)
return 0;
}
-#if defined(CONFIG_LOGBUFFER)
-static int reserve_logbuffer(void)
-{
-#ifndef CONFIG_ALT_LB_ADDR
- /* reserve kernel log buffer */
- gd->relocaddr -= LOGBUFF_RESERVE;
- debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN,
- gd->relocaddr);
-#endif
-
- return 0;
-}
-#endif
-
#ifdef CONFIG_PRAM
/* reserve protected RAM */
static int reserve_pram(void)
@@ -846,9 +831,6 @@ static const init_fnc_t init_sequence_f[] = {
* - board info struct
*/
setup_dest_addr,
-#if defined(CONFIG_LOGBUFFER)
- reserve_logbuffer,
-#endif
#ifdef CONFIG_PRAM
reserve_pram,
#endif
diff --git a/common/board_r.c b/common/board_r.c
index a3b9bfb8ee..89729d7736 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -30,7 +30,6 @@
#if defined(CONFIG_CMD_KGDB)
#include <kgdb.h>
#endif
-#include <logbuff.h>
#include <malloc.h>
#include <mapmem.h>
#ifdef CONFIG_BITBANGMII
@@ -200,19 +199,6 @@ static int initr_addr_map(void)
}
#endif
-#ifdef CONFIG_LOGBUFFER
-unsigned long logbuffer_base(void)
-{
- return gd->ram_top - LOGBUFF_LEN;
-}
-
-static int initr_logbuffer(void)
-{
- logbuff_init_ptrs();
- return 0;
-}
-#endif
-
#ifdef CONFIG_POST
static int initr_post_backlog(void)
{
@@ -628,7 +614,7 @@ static int initr_ide(void)
}
#endif
-#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
+#if defined(CONFIG_PRAM)
/*
* Export available size of memory for Linux, taking into account the
* protected RAM at top of memory
@@ -640,10 +626,6 @@ int initr_mem(void)
# ifdef CONFIG_PRAM
pram = env_get_ulong("pram", 10, CONFIG_PRAM);
-# endif
-# if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
- /* Also take the logbuffer into account (pram is in kB) */
- pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
# endif
sprintf(memsz, "%ldk", (long int) ((gd->ram_size / 1024) - pram));
env_set("mem", memsz);
@@ -753,9 +735,6 @@ static init_fnc_t init_sequence_r[] = {
board_early_init_r,
#endif
INIT_FUNC_WATCHDOG_RESET
-#ifdef CONFIG_LOGBUFFER
- initr_logbuffer,
-#endif
#ifdef CONFIG_POST
initr_post_backlog,
#endif
@@ -877,7 +856,7 @@ static init_fnc_t init_sequence_r[] = {
INIT_FUNC_WATCHDOG_RESET
initr_bedbug,
#endif
-#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
+#if defined(CONFIG_PRAM)
initr_mem,
#endif
#ifdef CONFIG_PS2KBD
diff --git a/common/image.c b/common/image.c
index 4ec4744589..4bcf6b3128 100644
--- a/common/image.c
+++ b/common/image.c
@@ -15,10 +15,6 @@
#include <status_led.h>
#endif
-#ifdef CONFIG_LOGBUFFER
-#include <logbuff.h>
-#endif
-
#include <rtc.h>
#include <environment.h>
@@ -1154,11 +1150,6 @@ int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len,
}
-#ifdef CONFIG_LOGBUFFER
- /* Prevent initrd from overwriting logbuffer */
- lmb_reserve(lmb, logbuffer_base() - LOGBUFF_OVERHEAD, LOGBUFF_RESERVE);
-#endif
-
debug("## initrd_high = 0x%08lx, copy_to_ram = %d\n",
initrd_high, initrd_copy_to_ram);
diff --git a/common/stdio.c b/common/stdio.c
index ee4f0bda9e..2e5143a025 100644
--- a/common/stdio.c
+++ b/common/stdio.c
@@ -17,9 +17,6 @@
#include <malloc.h>
#include <stdio_dev.h>
#include <serial.h>
-#ifdef CONFIG_LOGBUFFER
-#include <logbuff.h>
-#endif
#if defined(CONFIG_SYS_I2C)
#include <i2c.h>
@@ -380,9 +377,6 @@ int stdio_add_devices(void)
#endif /* CONFIG_DM_VIDEO */
#if defined(CONFIG_KEYBOARD) && !defined(CONFIG_DM_KEYBOARD)
drv_keyboard_init ();
-#endif
-#ifdef CONFIG_LOGBUFFER
- drv_logbuff_init ();
#endif
drv_system_init ();
serial_stdio_init ();
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index 944f58195c..79197acfa4 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -36,7 +36,7 @@ typedef struct global_data {
#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
unsigned long fb_base; /* Base address of framebuffer mem */
#endif
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+#if defined(CONFIG_POST)
unsigned long post_log_word; /* Record POST activities */
unsigned long post_log_res; /* success of POST test */
unsigned long post_init_f_time; /* When post_init_f started */
diff --git a/include/logbuff.h b/include/logbuff.h
deleted file mode 100644
index 625feb9f95..0000000000
--- a/include/logbuff.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * (C) Copyright 2002-2007
- * Detlev Zundel, dzu at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef _LOGBUFF_H
-#define _LOGBUFF_H
-
-#ifdef CONFIG_LOGBUFFER
-
-#define LOGBUFF_MAGIC 0xc0de4ced /* Forced by code, eh! */
-#define LOGBUFF_LEN (16384) /* Must be 16k right now */
-#define LOGBUFF_MASK (LOGBUFF_LEN-1)
-#define LOGBUFF_OVERHEAD (4096) /* Logbuffer overhead for extra info */
-#define LOGBUFF_RESERVE (LOGBUFF_LEN+LOGBUFF_OVERHEAD)
-
-/* The mapping used here has to be the same as in setup_ext_logbuff ()
- in linux/kernel/printk */
-
-typedef struct {
- union {
- struct {
- unsigned long tag;
- unsigned long start;
- unsigned long con;
- unsigned long end;
- unsigned long chars;
- } v2;
- struct {
- unsigned long dummy;
- unsigned long tag;
- unsigned long start;
- unsigned long size;
- unsigned long chars;
- } v1;
- };
- unsigned char buf[0];
-} logbuff_t;
-
-int drv_logbuff_init (void);
-void logbuff_init_ptrs (void);
-void logbuff_log(char *msg);
-void logbuff_reset (void);
-unsigned long logbuffer_base (void);
-
-#endif /* CONFIG_LOGBUFFER */
-
-#endif /* _LOGBUFF_H */
diff --git a/include/post.h b/include/post.h
index d5278111e8..b41a6c8127 100644
--- a/include/post.h
+++ b/include/post.h
@@ -15,7 +15,7 @@
#include <common.h>
#include <asm/io.h>
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+#if defined(CONFIG_POST)
#ifndef CONFIG_POST_EXTERNAL_WORD_FUNCS
#ifdef CONFIG_SYS_POST_WORD_ADDR
@@ -58,7 +58,7 @@ extern ulong post_word_load(void);
extern void post_word_store(ulong value);
#endif /* CONFIG_POST_EXTERNAL_WORD_FUNCS */
-#endif /* defined (CONFIG_POST) || defined(CONFIG_LOGBUFFER) */
+#endif /* defined (CONFIG_POST) */
#endif /* __ASSEMBLY__ */
#ifdef CONFIG_POST
diff --git a/post/post.c b/post/post.c
index 8fef0c3412..6c7902ad0c 100644
--- a/post/post.c
+++ b/post/post.c
@@ -15,10 +15,6 @@
#include <asm/gpio.h>
#endif
-#ifdef CONFIG_LOGBUFFER
-#include <logbuff.h>
-#endif
-
DECLARE_GLOBAL_DATA_PTR;
#define POST_MAX_NUMBER 32
@@ -407,13 +403,8 @@ int post_log(char *format, ...)
vsprintf(printbuffer, format, args);
va_end(args);
-#ifdef CONFIG_LOGBUFFER
- /* Send to the logbuffer */
- logbuff_log(printbuffer);
-#else
/* Send to the stdout file */
puts(printbuffer);
-#endif
return 0;
}
diff --git a/post/tests.c b/post/tests.c
index bc8e398051..473c0ea1e1 100644
--- a/post/tests.c
+++ b/post/tests.c
@@ -3,10 +3,6 @@
* Wolfgang Denk, DENX Software Engineering, wd at denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
- *
- * Be sure to mark tests to be run before relocation as such with the
- * CONFIG_SYS_POST_PREREL flag so that logging is done correctly if the
- * logbuffer support is enabled.
*/
#include <common.h>
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index c2fe81e552..d5ae1f4685 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1258,7 +1258,6 @@ CONFIG_LMS283GF05
CONFIG_LOADADDR
CONFIG_LOADCMD
CONFIG_LOADS_ECHO
-CONFIG_LOGBUFFER
CONFIG_LOWPOWER_ADDR
CONFIG_LOWPOWER_FLAG
CONFIG_LOW_MCFCLK
--
2.15.0.531.g2ccb3012c9-goog
next prev parent reply other threads:[~2017-12-04 20:48 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-04 20:48 [U-Boot] [PATCH v4 00/15] log: Add a new logging feature Simon Glass
2017-12-04 20:48 ` [U-Boot] [PATCH v4 01/15] Revert "sandbox: remove os_putc() and os_puts()" Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 02/15] sandbox: Adjust pre-console address to avoid conflict Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 03/15] Revert "sandbox: Drop special case console code for sandbox" Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 04/15] Move debug and logging support to a separate header Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 05/15] mtdparts: Correct use of debug() Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,05/15] " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 06/15] usb: " Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,06/15] " Tom Rini
2017-12-04 20:48 ` Simon Glass [this message]
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,07/15] Drop the log buffer Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 08/15] log: Add an implementation of logging Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 09/15] log: Add a console driver Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,09/15] " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 10/15] log: Add a 'log level' command Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,10/15] " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 11/15] log: Add a test command Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,11/15] " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 12/15] log: Plumb logging into the init sequence Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 13/15] log: sandbox: Enable logging Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,13/15] " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 14/15] log: test: Add a pytest for logging Simon Glass
2017-12-07 22:54 ` [U-Boot] [U-Boot,v4,14/15] " Tom Rini
2017-12-04 20:48 ` [U-Boot] [PATCH v4 15/15] log: Add documentation Simon Glass
2017-12-07 22:55 ` [U-Boot] [U-Boot,v4,15/15] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171204204831.98915-8-sjg@chromium.org \
--to=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.