From: Leo Liang <ycliang@andestech.com>
To: <trini@konsulko.com>
Cc: <u-boot@lists.denx.de>, <rick@andestech.com>
Subject: [PULL] u-boot-riscv/master
Date: Wed, 7 Jul 2021 00:02:05 +0800 [thread overview]
Message-ID: <20210706160205.GA11927@andestech.com> (raw)
Hi Tom,
The following changes since commit 1311dd37ecf476be041d0452d4ee38619aadd5de:
Merge branch '2021-07-01-update-CI-containers' (2021-07-05 15:29:44 -0400)
are available in the Git repository at:
git@source.denx.de:u-boot/custodians/u-boot-riscv.git
for you to fetch changes up to 4b4159d0f31ca3e0174ccfdce9a24a1fe3671829:
board: sifive: support spl multi-dtb on unmatched board (2021-07-06 20:24:26 +0800)
CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/8081
----------------------------------------------------------------
Dimitri John Ledkov (1):
riscv: sifive: Set default fdtfile names
Green Wan (1):
drivers: clk: sifive: fu740-prci: replace 'pciaux' with 'pcieaux'
Tianrui Wei (2):
board: riscv: add openpiton-riscv64 SoC support
mmc: openpiton: add piton_mmc driver
Zong Li (6):
board: sifive: unmatched: add initial support for a platform ID EEPROM
riscv: sifive: fu740: kconfig: Enable support for Opencores I2C controller
riscv: sifive: fu740: Support i2c in spl
board: sifive: Add an interface to get PCB revision
riscv: dts: add dts for unmatched rev1
board: sifive: support spl multi-dtb on unmatched board
arch/riscv/Kconfig | 4 +
arch/riscv/cpu/fu740/Kconfig | 3 +
arch/riscv/dts/Makefile | 3 +-
arch/riscv/dts/fu740-c000-u-boot.dtsi | 4 +
.../dts/fu740-hifive-unmatched-a00-ddr-rev1.dtsi | 1489 ++++++++++++++++++++
.../dts/hifive-unmatched-a00-rev1-u-boot.dtsi | 7 +
arch/riscv/dts/hifive-unmatched-a00-rev1.dts | 4 +
arch/riscv/dts/openpiton-riscv64.dts | 153 ++
arch/riscv/include/asm/arch-fu740/eeprom.h | 15 +
board/openpiton/riscv64/Kconfig | 40 +
board/openpiton/riscv64/MAINTAINERS | 8 +
board/openpiton/riscv64/Makefile | 5 +
board/openpiton/riscv64/openpiton-riscv64.c | 33 +
board/sifive/unmatched/Kconfig | 1 +
board/sifive/unmatched/Makefile | 1 +
.../sifive/unmatched/hifive-platform-i2c-eeprom.c | 574 ++++++++
board/sifive/unmatched/spl.c | 28 +-
configs/openpiton_riscv64_defconfig | 76 +
configs/openpiton_riscv64_spl_defconfig | 87 ++
configs/sifive_unleashed_defconfig | 1 +
configs/sifive_unmatched_defconfig | 5 +
doc/board/index.rst | 1 +
doc/board/openpiton/index.rst | 9 +
doc/board/openpiton/riscv64.rst | 376 +++++
drivers/clk/sifive/fu740-prci.c | 6 +-
drivers/mmc/Kconfig | 9 +
drivers/mmc/Makefile | 1 +
drivers/mmc/piton_mmc.c | 161 +++
include/configs/openpiton-riscv64.h | 61 +
include/configs/sifive-unleashed.h | 1 +
include/configs/sifive-unmatched.h | 7 +
31 files changed, 3167 insertions(+), 6 deletions(-)
create mode 100644 arch/riscv/dts/fu740-hifive-unmatched-a00-ddr-rev1.dtsi
create mode 100644 arch/riscv/dts/hifive-unmatched-a00-rev1-u-boot.dtsi
create mode 100644 arch/riscv/dts/hifive-unmatched-a00-rev1.dts
create mode 100644 arch/riscv/dts/openpiton-riscv64.dts
create mode 100644 arch/riscv/include/asm/arch-fu740/eeprom.h
create mode 100644 board/openpiton/riscv64/Kconfig
create mode 100644 board/openpiton/riscv64/MAINTAINERS
create mode 100644 board/openpiton/riscv64/Makefile
create mode 100644 board/openpiton/riscv64/openpiton-riscv64.c
create mode 100644 board/sifive/unmatched/hifive-platform-i2c-eeprom.c
create mode 100644 configs/openpiton_riscv64_defconfig
create mode 100644 configs/openpiton_riscv64_spl_defconfig
create mode 100644 doc/board/openpiton/index.rst
create mode 100644 doc/board/openpiton/riscv64.rst
create mode 100644 drivers/mmc/piton_mmc.c
create mode 100644 include/configs/openpiton-riscv64.h
Best regards,
Leo
next reply other threads:[~2021-07-06 16:02 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-06 16:02 Leo Liang [this message]
2021-07-06 19:52 ` [PULL] u-boot-riscv/master Tom Rini
2021-07-07 4:05 ` Tianrui Wei
-- strict thread matches above, loose matches on Subject: below --
2025-10-29 7:38 Leo Liang
2025-10-29 18:07 ` Tom Rini
2025-07-17 7:02 Leo Liang
2025-07-17 19:02 ` Tom Rini
2025-06-02 8:31 Leo Liang
2025-06-02 22:36 ` Tom Rini
2024-09-10 2:38 Leo Liang
2024-09-10 17:22 ` Tom Rini
2023-10-19 11:41 Leo Liang
2023-10-19 14:57 ` Tom Rini
2023-10-05 8:10 Leo Liang
2023-10-05 17:46 ` Tom Rini
2023-09-26 5:21 Leo Liang
2023-09-26 14:05 ` Tom Rini
2023-09-21 1:36 Leo Liang
2023-09-21 19:57 ` Tom Rini
2023-09-05 3:30 Leo Liang
2023-09-05 18:43 ` Tom Rini
2023-08-10 10:32 Leo Liang
2023-08-10 16:22 ` Tom Rini
2023-08-02 5:48 Leo Liang
2023-08-02 6:27 ` Bin Meng
2023-08-02 9:31 ` Leo Liang
2023-08-03 0:59 ` Minda Chen
2023-07-24 8:01 Leo Liang
2023-07-24 16:41 ` Tom Rini
2023-07-12 6:58 Leo Liang
2023-07-12 19:43 ` Tom Rini
2023-04-21 0:41 Leo Liang
2023-04-23 16:15 ` Tom Rini
2023-02-17 12:12 Leo Liang
2023-02-17 15:01 ` Tom Rini
2023-02-19 6:09 ` Leo Liang
2023-02-02 6:30 Leo Liang
2023-02-02 19:18 ` Tom Rini
2022-12-08 11:23 Leo Liang
2022-12-08 16:24 ` Tom Rini
2022-11-16 6:16 Leo Liang
2022-11-16 18:01 ` Tom Rini
2022-11-03 7:04 Leo Liang
2022-11-03 16:57 ` Tom Rini
2022-11-04 0:28 ` Leo Liang
2022-10-20 12:36 Leo Liang
2022-10-20 19:03 ` Tom Rini
2022-09-06 6:07 Leo Liang
2022-09-06 15:50 ` Tom Rini
2022-08-11 21:38 Leo Liang
2022-08-12 12:17 ` Tom Rini
2022-05-27 2:36 Leo Liang
2022-05-27 13:30 ` Tom Rini
2022-05-28 9:02 ` Leo Liang
2022-05-30 15:05 ` Tom Rini
2022-08-11 22:22 ` Leo Liang
2022-04-06 4:43 Leo Liang
2022-04-06 15:55 ` Tom Rini
2022-03-16 2:56 Leo Liang
2022-03-16 14:48 ` Tom Rini
2022-02-10 15:16 Leo Liang
2022-02-11 0:35 ` Tom Rini
2021-12-03 6:19 Leo Liang
2021-12-04 17:50 ` Tom Rini
2021-11-09 2:40 Leo Liang
2021-11-09 13:45 ` Tom Rini
2021-10-20 7:14 Leo Liang
2021-10-21 11:51 ` Tom Rini
2021-10-07 11:51 Leo Liang
2021-10-07 15:43 ` Tom Rini
2021-09-07 8:20 Leo Liang
2021-09-07 15:33 ` Tom Rini
2021-08-19 8:56 Leo Liang
2021-08-19 14:13 ` Tom Rini
2021-07-22 2:15 Leo Liang
2021-07-22 12:15 ` Tom Rini
2021-07-07 15:21 Leo Liang
2021-07-07 17:33 ` Tom Rini
2021-06-17 3:31 Leo Liang
2021-06-17 14:51 ` Tom Rini
2021-05-31 10:16 Leo Liang
2021-05-31 18:59 ` Tom Rini
2021-05-26 8:12 Leo Liang
2021-05-26 15:24 ` Tom Rini
2021-05-27 8:57 ` Green Wan
2021-05-27 10:41 ` Leo Liang
2021-05-27 11:20 ` Tom Rini
2021-05-27 13:56 ` Green Wan
2021-05-20 2:19 Leo Liang
2021-05-21 14:07 ` Tom Rini
2021-05-18 1:48 Leo Liang
2021-05-18 18:17 ` Tom Rini
2021-05-14 11:10 Leo Liang
2021-05-14 12:23 ` Bin Meng
2021-05-15 12:09 ` Tom Rini
2021-05-07 1:06 Leo Liang
2021-05-07 1:09 ` Tom Rini
2021-05-07 1:41 ` Leo Liang
2021-05-07 1:55 ` Sean Anderson
2021-05-07 16:15 ` Tom Rini
2021-05-07 14:21 ` Dimitri John Ledkov
2021-05-07 14:35 ` Tom Rini
2021-05-07 1:49 ` Sean Anderson
2021-05-10 6:57 ` Leo Liang
2021-05-07 15:37 ` Tom Rini
2021-04-08 10:44 Leo Liang
2021-04-08 19:36 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210706160205.GA11927@andestech.com \
--to=ycliang@andestech.com \
--cc=rick@andestech.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.