From: Leo Liang <ycliang@andestech.com>
To: <trini@konsulko.com>
Cc: <u-boot@lists.denx.de>, <rick@andestech.com>, <ycliang@andestech.com>
Subject: [PULL] u-boot-riscv/master
Date: Wed, 12 Jul 2023 06:58:21 +0000 [thread overview]
Message-ID: <ZK5PDRgBEjEW+zj3@ubuntu01> (raw)
Hi Tom,
The following changes since commit 8e21064cb3452950b09301baec06d86e37342471:
Merge tag 'efi-2023-07-rc7' of https://source.denx.de/u-boot/custodians/u-boot-efi (2023-07-11 13:27:32 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-riscv.git master
for you to fetch changes up to 478fedfda42ea2a444991de1696fa0adc8bb16d4:
doc: t-head: lpi4a: document Lichee PI 4A board (2023-07-12 13:21:41 +0800)
CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/16856
----------------------------------------------------------------
- Add ethernet driver for StarFive JH7110 SoC
- Add ACLINT mtimer and mswi devices support
- Add Lichee PI 4A board
----------------------------------------------------------------
Bin Meng (3):
riscv: timer: Update the sifive clint timer driver to support aclint
riscv: clint: Update the sifive clint ipi driver to support aclint
riscv: Rename SiFive CLINT to RISC-V ALINT
Yanhong Wang (11):
net: phy: Add driver for Motorcomm yt8531 gigabit ethernet phy
net: dwc_eth_qos: Add StarFive ethernet driver glue layer
riscv: dts: jh7110: Add ethernet device tree nodes
riscv: dts: jh7110: Combine the board device tree files of 1.2A and 1.3B
doc: board: starfive: Reword the make defconfig information
configs: starfive: Enable ethernet configuration for StarFive VisionFive2
eeprom: starfive: Enable ID EEPROM configuration
riscv: dts: starfive: Add support eeprom device tree node
configs: starfive: Enable ID EEPROM configuration
ram: starfive: Read memory size information from EEPROM
board: starfive: Dynamic configuration of DT for 1.2A and 1.3B
Yixun Lan (4):
riscv: t-head: licheepi4a: initial support added
riscv: dts: t-head: Add basic device tree for Sipeed Lichee PI 4A board
configs: th1520_lpi4a_defconfig: Add initial config
doc: t-head: lpi4a: document Lichee PI 4A board
MAINTAINERS | 2 +-
arch/riscv/Kconfig | 17 +++--
arch/riscv/cpu/fu540/Kconfig | 2 +-
arch/riscv/cpu/fu740/Kconfig | 2 +-
arch/riscv/cpu/generic/Kconfig | 4 +-
arch/riscv/cpu/jh7110/Kconfig | 2 +-
arch/riscv/cpu/jh7110/spl.c | 32 ++++++++-
arch/riscv/dts/Makefile | 4 +-
arch/riscv/dts/{jh7110-starfive-visionfive-2-v1.2a-u-boot.dtsi => jh7110-starfive-visionfive-2-u-boot.dtsi} | 39 ++++++++++-
arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a.dts | 12 ----
arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi | 69 -------------------
arch/riscv/dts/{jh7110-starfive-visionfive-2-v1.3b.dts => jh7110-starfive-visionfive-2.dts} | 3 +-
arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi | 40 +++++++++++
arch/riscv/dts/jh7110.dtsi | 69 +++++++++++++++++++
arch/riscv/dts/th1520-lichee-module-4a.dtsi | 34 +++++++++
arch/riscv/dts/th1520-lichee-pi-4a.dts | 32 +++++++++
arch/riscv/dts/th1520.dtsi | 406 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/riscv/include/asm/arch-jh7110/eeprom.h | 13 ++++
arch/riscv/include/asm/global_data.h | 4 +-
arch/riscv/include/asm/syscon.h | 2 +-
arch/riscv/lib/Makefile | 2 +-
arch/riscv/lib/{sifive_clint.c => aclint_ipi.c} | 31 +++++++--
board/openpiton/riscv64/Kconfig | 2 +-
board/sipeed/maix/Kconfig | 2 +-
board/starfive/visionfive2/Makefile | 1 +
board/starfive/visionfive2/spl.c | 157 ++++++++++++++++++++++++++++++++++++++++++
board/starfive/visionfive2/starfive_visionfive2.c | 13 ++++
board/starfive/visionfive2/visionfive2-i2c-eeprom.c | 561 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/thead/th1520_lpi4a/Kconfig | 42 ++++++++++++
board/thead/th1520_lpi4a/MAINTAINERS | 7 ++
board/thead/th1520_lpi4a/Makefile | 5 ++
board/thead/th1520_lpi4a/board.c | 15 ++++
configs/starfive_visionfive2_defconfig | 32 ++++++++-
configs/th1520_lpi4a_defconfig | 82 ++++++++++++++++++++++
doc/board/index.rst | 1 +
doc/board/starfive/visionfive2.rst | 6 +-
doc/board/thead/index.rst | 9 +++
doc/board/thead/lpi4a.rst | 129 +++++++++++++++++++++++++++++++++++
drivers/net/Kconfig | 7 ++
drivers/net/Makefile | 1 +
drivers/net/dwc_eth_qos.c | 6 ++
drivers/net/dwc_eth_qos.h | 1 +
drivers/net/dwc_eth_qos_starfive.c | 249 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/phy/Kconfig | 6 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/motorcomm.c | 437 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/ram/starfive/starfive_ddr.c | 2 -
drivers/timer/Makefile | 2 +-
drivers/timer/riscv_aclint_timer.c | 74 ++++++++++++++++++++
drivers/timer/sifive_clint_timer.c | 68 ------------------
include/configs/qemu-riscv.h | 2 +-
include/configs/sifive-unleashed.h | 2 +-
include/configs/starfive-visionfive2.h | 1 +
include/configs/th1520_lpi4a.h | 22 ++++++
54 files changed, 2578 insertions(+), 188 deletions(-)
rename arch/riscv/dts/{jh7110-starfive-visionfive-2-v1.2a-u-boot.dtsi => jh7110-starfive-visionfive-2-u-boot.dtsi} (58%)
delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a.dts
delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
rename arch/riscv/dts/{jh7110-starfive-visionfive-2-v1.3b.dts => jh7110-starfive-visionfive-2.dts} (65%)
create mode 100644 arch/riscv/dts/th1520-lichee-module-4a.dtsi
create mode 100644 arch/riscv/dts/th1520-lichee-pi-4a.dts
create mode 100644 arch/riscv/dts/th1520.dtsi
create mode 100644 arch/riscv/include/asm/arch-jh7110/eeprom.h
rename arch/riscv/lib/{sifive_clint.c => aclint_ipi.c} (53%)
create mode 100644 board/starfive/visionfive2/visionfive2-i2c-eeprom.c
create mode 100644 board/thead/th1520_lpi4a/Kconfig
create mode 100644 board/thead/th1520_lpi4a/MAINTAINERS
create mode 100644 board/thead/th1520_lpi4a/Makefile
create mode 100644 board/thead/th1520_lpi4a/board.c
create mode 100644 configs/th1520_lpi4a_defconfig
create mode 100644 doc/board/thead/index.rst
create mode 100644 doc/board/thead/lpi4a.rst
create mode 100644 drivers/net/dwc_eth_qos_starfive.c
create mode 100644 drivers/net/phy/motorcomm.c
create mode 100644 drivers/timer/riscv_aclint_timer.c
delete mode 100644 drivers/timer/sifive_clint_timer.c
create mode 100644 include/configs/th1520_lpi4a.h
Best regards,
Leo
next reply other threads:[~2023-07-12 6:58 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-12 6:58 Leo Liang [this message]
2023-07-12 19:43 ` [PULL] u-boot-riscv/master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2025-10-29 7:38 Leo Liang
2025-10-29 18:07 ` Tom Rini
2025-07-17 7:02 Leo Liang
2025-07-17 19:02 ` Tom Rini
2025-06-02 8:31 Leo Liang
2025-06-02 22:36 ` Tom Rini
2024-09-10 2:38 Leo Liang
2024-09-10 17:22 ` Tom Rini
2023-10-19 11:41 Leo Liang
2023-10-19 14:57 ` Tom Rini
2023-10-05 8:10 Leo Liang
2023-10-05 17:46 ` Tom Rini
2023-09-26 5:21 Leo Liang
2023-09-26 14:05 ` Tom Rini
2023-09-21 1:36 Leo Liang
2023-09-21 19:57 ` Tom Rini
2023-09-05 3:30 Leo Liang
2023-09-05 18:43 ` Tom Rini
2023-08-10 10:32 Leo Liang
2023-08-10 16:22 ` Tom Rini
2023-08-02 5:48 Leo Liang
2023-08-02 6:27 ` Bin Meng
2023-08-02 9:31 ` Leo Liang
2023-08-03 0:59 ` Minda Chen
2023-07-24 8:01 Leo Liang
2023-07-24 16:41 ` Tom Rini
2023-04-21 0:41 Leo Liang
2023-04-23 16:15 ` Tom Rini
2023-02-17 12:12 Leo Liang
2023-02-17 15:01 ` Tom Rini
2023-02-19 6:09 ` Leo Liang
2023-02-02 6:30 Leo Liang
2023-02-02 19:18 ` Tom Rini
2022-12-08 11:23 Leo Liang
2022-12-08 16:24 ` Tom Rini
2022-11-16 6:16 Leo Liang
2022-11-16 18:01 ` Tom Rini
2022-11-03 7:04 Leo Liang
2022-11-03 16:57 ` Tom Rini
2022-11-04 0:28 ` Leo Liang
2022-10-20 12:36 Leo Liang
2022-10-20 19:03 ` Tom Rini
2022-09-06 6:07 Leo Liang
2022-09-06 15:50 ` Tom Rini
2022-08-11 21:38 Leo Liang
2022-08-12 12:17 ` Tom Rini
2022-05-27 2:36 Leo Liang
2022-05-27 13:30 ` Tom Rini
2022-05-28 9:02 ` Leo Liang
2022-05-30 15:05 ` Tom Rini
2022-08-11 22:22 ` Leo Liang
2022-04-06 4:43 Leo Liang
2022-04-06 15:55 ` Tom Rini
2022-03-16 2:56 Leo Liang
2022-03-16 14:48 ` Tom Rini
2022-02-10 15:16 Leo Liang
2022-02-11 0:35 ` Tom Rini
2021-12-03 6:19 Leo Liang
2021-12-04 17:50 ` Tom Rini
2021-11-09 2:40 Leo Liang
2021-11-09 13:45 ` Tom Rini
2021-10-20 7:14 Leo Liang
2021-10-21 11:51 ` Tom Rini
2021-10-07 11:51 Leo Liang
2021-10-07 15:43 ` Tom Rini
2021-09-07 8:20 Leo Liang
2021-09-07 15:33 ` Tom Rini
2021-08-19 8:56 Leo Liang
2021-08-19 14:13 ` Tom Rini
2021-07-22 2:15 Leo Liang
2021-07-22 12:15 ` Tom Rini
2021-07-07 15:21 Leo Liang
2021-07-07 17:33 ` Tom Rini
2021-07-06 16:02 Leo Liang
2021-07-06 19:52 ` Tom Rini
2021-07-07 4:05 ` Tianrui Wei
2021-06-17 3:31 Leo Liang
2021-06-17 14:51 ` Tom Rini
2021-05-31 10:16 Leo Liang
2021-05-31 18:59 ` Tom Rini
2021-05-26 8:12 Leo Liang
2021-05-26 15:24 ` Tom Rini
2021-05-27 8:57 ` Green Wan
2021-05-27 10:41 ` Leo Liang
2021-05-27 11:20 ` Tom Rini
2021-05-27 13:56 ` Green Wan
2021-05-20 2:19 Leo Liang
2021-05-21 14:07 ` Tom Rini
2021-05-18 1:48 Leo Liang
2021-05-18 18:17 ` Tom Rini
2021-05-14 11:10 Leo Liang
2021-05-14 12:23 ` Bin Meng
2021-05-15 12:09 ` Tom Rini
2021-05-07 1:06 Leo Liang
2021-05-07 1:09 ` Tom Rini
2021-05-07 1:41 ` Leo Liang
2021-05-07 1:55 ` Sean Anderson
2021-05-07 16:15 ` Tom Rini
2021-05-07 14:21 ` Dimitri John Ledkov
2021-05-07 14:35 ` Tom Rini
2021-05-07 1:49 ` Sean Anderson
2021-05-10 6:57 ` Leo Liang
2021-05-07 15:37 ` Tom Rini
2021-04-08 10:44 Leo Liang
2021-04-08 19:36 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZK5PDRgBEjEW+zj3@ubuntu01 \
--to=ycliang@andestech.com \
--cc=rick@andestech.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.