From: Leo Liang <ycliang@andestech.com>
To: <trini@konsulko.com>
Cc: <u-boot@lists.denx.de>, <rick@andestech.com>, <ycliang@andestech.com>
Subject: [PULL] u-boot-riscv/master
Date: Wed, 16 Mar 2022 10:56:40 +0800 [thread overview]
Message-ID: <20220316025640.GA7600@atcfdc88> (raw)
Hi Tom,
The following changes since commit c149bf41404e34014e37de32fac332892b11bd4a:
Prepare v2022.04-rc4 (2022-03-14 16:39:08 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-riscv.git
for you to fetch changes up to aa34e13346cf727197981c599f688b406005049a:
pinctrl: k210: Fix bias-pull-up (2022-03-15 17:43:11 +0800)
CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/11297
----------------------------------------------------------------
Damien Le Moal (4):
k210: use the board vendor name rather than the marketing name
k210: dts: add missing power bus clocks
k210: dts: align fpioa node with Linux
spi: dw: Force set K210 fifo length to 31
Niklas Cassel (3):
k210: dts: align plic node with Linux
pinctrl: k210: Fix loop in k210_pc_get_drive()
pinctrl: k210: Fix bias-pull-up
Sean Anderson (1):
spi: dw: Actually mask interrupts
MAINTAINERS | 12 +-
arch/riscv/dts/k210-maix-bit.dts | 3 +-
arch/riscv/dts/k210.dtsi | 177 ++++++++++++---------
board/sipeed/maix/maix.c | 2 +-
doc/board/sipeed/maix.rst | 20 +--
...ryte,k210-sysctl.txt => canaan,k210-sysctl.txt} | 8 +-
...ndryte,k210-fpioa.txt => canaan,k210-fpioa.txt} | 12 +-
doc/device-tree-bindings/spi/snps,dw-apb-ssi.txt | 4 +-
drivers/clk/Makefile | 2 +-
drivers/clk/{clk_kendryte.c => clk_k210.c} | 4 +-
drivers/pinctrl/Makefile | 2 +-
.../pinctrl/{pinctrl-kendryte.c => pinctrl-k210.c} | 25 ++-
drivers/spi/designware_spi.c | 20 ++-
include/configs/sipeed-maix.h | 2 +-
include/{kendryte => k210}/pll.h | 0
test/dm/k210_pll.c | 2 +-
16 files changed, 174 insertions(+), 121 deletions(-)
rename doc/device-tree-bindings/mfd/{kendryte,k210-sysctl.txt => canaan,k210-sysctl.txt} (78%)
rename doc/device-tree-bindings/pinctrl/{kendryte,k210-fpioa.txt => canaan,k210-fpioa.txt} (91%)
rename drivers/clk/{clk_kendryte.c => clk_k210.c} (99%)
rename drivers/pinctrl/{pinctrl-kendryte.c => pinctrl-k210.c} (97%)
rename include/{kendryte => k210}/pll.h (100%)
Best regards,
Leo
next reply other threads:[~2022-03-16 2:57 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-16 2:56 Leo Liang [this message]
2022-03-16 14:48 ` [PULL] u-boot-riscv/master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2025-10-29 7:38 Leo Liang
2025-10-29 18:07 ` Tom Rini
2025-07-17 7:02 Leo Liang
2025-07-17 19:02 ` Tom Rini
2025-06-02 8:31 Leo Liang
2025-06-02 22:36 ` Tom Rini
2024-09-10 2:38 Leo Liang
2024-09-10 17:22 ` Tom Rini
2023-10-19 11:41 Leo Liang
2023-10-19 14:57 ` Tom Rini
2023-10-05 8:10 Leo Liang
2023-10-05 17:46 ` Tom Rini
2023-09-26 5:21 Leo Liang
2023-09-26 14:05 ` Tom Rini
2023-09-21 1:36 Leo Liang
2023-09-21 19:57 ` Tom Rini
2023-09-05 3:30 Leo Liang
2023-09-05 18:43 ` Tom Rini
2023-08-10 10:32 Leo Liang
2023-08-10 16:22 ` Tom Rini
2023-08-02 5:48 Leo Liang
2023-08-02 6:27 ` Bin Meng
2023-08-02 9:31 ` Leo Liang
2023-08-03 0:59 ` Minda Chen
2023-07-24 8:01 Leo Liang
2023-07-24 16:41 ` Tom Rini
2023-07-12 6:58 Leo Liang
2023-07-12 19:43 ` Tom Rini
2023-04-21 0:41 Leo Liang
2023-04-23 16:15 ` Tom Rini
2023-02-17 12:12 Leo Liang
2023-02-17 15:01 ` Tom Rini
2023-02-19 6:09 ` Leo Liang
2023-02-02 6:30 Leo Liang
2023-02-02 19:18 ` Tom Rini
2022-12-08 11:23 Leo Liang
2022-12-08 16:24 ` Tom Rini
2022-11-16 6:16 Leo Liang
2022-11-16 18:01 ` Tom Rini
2022-11-03 7:04 Leo Liang
2022-11-03 16:57 ` Tom Rini
2022-11-04 0:28 ` Leo Liang
2022-10-20 12:36 Leo Liang
2022-10-20 19:03 ` Tom Rini
2022-09-06 6:07 Leo Liang
2022-09-06 15:50 ` Tom Rini
2022-08-11 21:38 Leo Liang
2022-08-12 12:17 ` Tom Rini
2022-05-27 2:36 Leo Liang
2022-05-27 13:30 ` Tom Rini
2022-05-28 9:02 ` Leo Liang
2022-05-30 15:05 ` Tom Rini
2022-08-11 22:22 ` Leo Liang
2022-04-06 4:43 Leo Liang
2022-04-06 15:55 ` Tom Rini
2022-02-10 15:16 Leo Liang
2022-02-11 0:35 ` Tom Rini
2021-12-03 6:19 Leo Liang
2021-12-04 17:50 ` Tom Rini
2021-11-09 2:40 Leo Liang
2021-11-09 13:45 ` Tom Rini
2021-10-20 7:14 Leo Liang
2021-10-21 11:51 ` Tom Rini
2021-10-07 11:51 Leo Liang
2021-10-07 15:43 ` Tom Rini
2021-09-07 8:20 Leo Liang
2021-09-07 15:33 ` Tom Rini
2021-08-19 8:56 Leo Liang
2021-08-19 14:13 ` Tom Rini
2021-07-22 2:15 Leo Liang
2021-07-22 12:15 ` Tom Rini
2021-07-07 15:21 Leo Liang
2021-07-07 17:33 ` Tom Rini
2021-07-06 16:02 Leo Liang
2021-07-06 19:52 ` Tom Rini
2021-07-07 4:05 ` Tianrui Wei
2021-06-17 3:31 Leo Liang
2021-06-17 14:51 ` Tom Rini
2021-05-31 10:16 Leo Liang
2021-05-31 18:59 ` Tom Rini
2021-05-26 8:12 Leo Liang
2021-05-26 15:24 ` Tom Rini
2021-05-27 8:57 ` Green Wan
2021-05-27 10:41 ` Leo Liang
2021-05-27 11:20 ` Tom Rini
2021-05-27 13:56 ` Green Wan
2021-05-20 2:19 Leo Liang
2021-05-21 14:07 ` Tom Rini
2021-05-18 1:48 Leo Liang
2021-05-18 18:17 ` Tom Rini
2021-05-14 11:10 Leo Liang
2021-05-14 12:23 ` Bin Meng
2021-05-15 12:09 ` Tom Rini
2021-05-07 1:06 Leo Liang
2021-05-07 1:09 ` Tom Rini
2021-05-07 1:41 ` Leo Liang
2021-05-07 1:55 ` Sean Anderson
2021-05-07 16:15 ` Tom Rini
2021-05-07 14:21 ` Dimitri John Ledkov
2021-05-07 14:35 ` Tom Rini
2021-05-07 1:49 ` Sean Anderson
2021-05-10 6:57 ` Leo Liang
2021-05-07 15:37 ` Tom Rini
2021-04-08 10:44 Leo Liang
2021-04-08 19:36 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220316025640.GA7600@atcfdc88 \
--to=ycliang@andestech.com \
--cc=rick@andestech.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.