From: Leo Liang <ycliang@andestech.com>
To: <trini@konsulko.com>
Cc: <rick@andestech.com>, <ycliang@andestech.com>, <u-boot@lists.denx.de>
Subject: [PULL] u-boot-riscv/master
Date: Fri, 21 Apr 2023 00:41:14 +0000 [thread overview]
Message-ID: <ZEHbqoEXAB+BAtmo@ubuntu01> (raw)
Hi Tom,
The following changes since commit 5db4972a5bbdbf9e3af48ffc9bc4fec73b7b6a79:
Merge tag 'u-boot-nand-20230417' of https://source.denx.de/u-boot/custodians/u-boot-nand-flash (2023-04-17 10:47:33 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-riscv.git
for you to fetch changes up to 04d16be55404ee07134b4171dea37eff9ad8fa5a:
riscv: Support CONFIG_REMAKE_ELF (2023-04-20 20:45:08 +0800)
CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/16065
----------------------------------------------------------------
* Add StarFive VisionFive v2 Board support
* Support CONFIG_REMAKE_ELF
* Code cleanups for RISC-V architecture
----------------------------------------------------------------
Bin Meng (11):
riscv: Correct a comment in io.h
riscv: Enforce DWARF4 output
riscv: Optimize source end address calculation in start.S
riscv: Optimize loading relocation type
tools: prelink-riscv: Cosmetic style fixes
tools: prelink-riscv: Unmap the ELF image when done
makefile: riscv: Drop useless argument of prelink-riscv
riscv: Change to use positive offset to access relocation entries
riscv: Avoid updating the link register
riscv: spl: Remove relocation sections
riscv: Update alignment for some sections in linker scripts
Jianlong Huang (1):
dt-bindings: pinctrl: Add StarFive JH7110 pinctrl definitions
Kuan Lim Lee (1):
pinctrl: starfive: Add StarFive JH7110 driver
Samuel Holland (1):
riscv: Support CONFIG_REMAKE_ELF
Yanhong Wang (15):
riscv: cpu: jh7110: Add support for jh7110 SoC
cache: starfive: Add StarFive JH7110 support
dt-bindings: reset: Add StarFive JH7110 reset definitions
reset: starfive: jh7110: Add reset driver for StarFive JH7110 SoC
dt-bindings: clock: Add StarFive JH7110 clock definitions
clk: starfive: Add StarFive JH7110 clock driver
ram: starfive: add ddr driver
board: starfive: add StarFive VisionFive v2 board support
riscv: cpu: jh7110: Add Kconfig for StarFive JH7110 SoC
board: starfive: Add Kconfig for StarFive VisionFive v2 Board
board: starfive: Add TARGET_STARFIVE_VISIONFIVE2 to Kconfig
riscv: dts: jh7110: Add initial StarFive JH7110 device tree
riscv: dts: jh7110: Add initial u-boot device tree
riscv: dts: jh7110: Add initial StarFive VisionFive v2 board device tree
configs: starfive: add starfive_visionfive2_defconfig
Makefile | 2 +-
arch/riscv/Kconfig | 5 +
arch/riscv/config.mk | 5 +-
arch/riscv/cpu/jh7110/Kconfig | 28 ++
arch/riscv/cpu/jh7110/Makefile | 10 +
arch/riscv/cpu/jh7110/cpu.c | 23 ++
arch/riscv/cpu/jh7110/dram.c | 38 +++
arch/riscv/cpu/jh7110/spl.c | 64 ++++
arch/riscv/cpu/start.S | 28 +-
arch/riscv/cpu/u-boot-spl.lds | 27 +-
arch/riscv/cpu/u-boot.lds | 6 +-
arch/riscv/dts/Makefile | 3 +-
arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a-u-boot.dtsi | 69 ++++
arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a.dts | 12 +
arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi | 69 ++++
arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b.dts | 12 +
arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi | 319 +++++++++++++++++++
arch/riscv/dts/jh7110-u-boot.dtsi | 99 ++++++
arch/riscv/dts/jh7110.dtsi | 573 +++++++++++++++++++++++++++++++++
arch/riscv/include/asm/arch-jh7110/regs.h | 19 ++
arch/riscv/include/asm/arch-jh7110/spl.h | 12 +
arch/riscv/include/asm/io.h | 2 +-
board/starfive/visionfive2/Kconfig | 53 ++++
board/starfive/visionfive2/MAINTAINERS | 7 +
board/starfive/visionfive2/Makefile | 7 +
board/starfive/visionfive2/spl.c | 87 +++++
board/starfive/visionfive2/starfive_visionfive2.c | 40 +++
configs/starfive_visionfive2_defconfig | 79 +++++
doc/board/index.rst | 1 +
doc/board/starfive/index.rst | 9 +
doc/board/starfive/visionfive2.rst | 492 +++++++++++++++++++++++++++++
drivers/cache/cache-sifive-ccache.c | 1 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/starfive/Kconfig | 17 +
drivers/clk/starfive/Makefile | 4 +
drivers/clk/starfive/clk-jh7110-pll.c | 321 +++++++++++++++++++
drivers/clk/starfive/clk-jh7110.c | 603 +++++++++++++++++++++++++++++++++++
drivers/clk/starfive/clk.h | 57 ++++
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/starfive/Kconfig | 28 ++
drivers/pinctrl/starfive/Makefile | 6 +
drivers/pinctrl/starfive/pinctrl-jh7110-aon.c | 113 +++++++
drivers/pinctrl/starfive/pinctrl-jh7110-sys.c | 399 +++++++++++++++++++++++
drivers/pinctrl/starfive/pinctrl-starfive.c | 398 +++++++++++++++++++++++
drivers/pinctrl/starfive/pinctrl-starfive.h | 55 ++++
drivers/ram/Kconfig | 1 +
drivers/ram/Makefile | 4 +-
drivers/ram/starfive/Kconfig | 5 +
drivers/ram/starfive/Makefile | 11 +
drivers/ram/starfive/ddrcsr_boot.c | 339 ++++++++++++++++++++
drivers/ram/starfive/ddrphy_start.c | 279 ++++++++++++++++
drivers/ram/starfive/ddrphy_train.c | 383 ++++++++++++++++++++++
drivers/ram/starfive/ddrphy_utils.c | 1955 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/ram/starfive/starfive_ddr.c | 161 ++++++++++
drivers/ram/starfive/starfive_ddr.h | 65 ++++
drivers/reset/Kconfig | 16 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-jh7110.c | 158 ++++++++++
include/configs/starfive-visionfive2.h | 49 +++
include/dt-bindings/clock/starfive,jh7110-crg.h | 257 +++++++++++++++
include/dt-bindings/pinctrl/pinctrl-starfive-jh7110.h | 427 +++++++++++++++++++++++++
include/dt-bindings/reset/starfive,jh7110-crg.h | 183 +++++++++++
tools/prelink-riscv.c | 2 +
tools/prelink-riscv.inc | 12 +-
66 files changed, 8456 insertions(+), 58 deletions(-)
create mode 100644 arch/riscv/cpu/jh7110/Kconfig
create mode 100644 arch/riscv/cpu/jh7110/Makefile
create mode 100644 arch/riscv/cpu/jh7110/cpu.c
create mode 100644 arch/riscv/cpu/jh7110/dram.c
create mode 100644 arch/riscv/cpu/jh7110/spl.c
create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a-u-boot.dtsi
create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a.dts
create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b.dts
create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
create mode 100644 arch/riscv/dts/jh7110-u-boot.dtsi
create mode 100644 arch/riscv/dts/jh7110.dtsi
create mode 100644 arch/riscv/include/asm/arch-jh7110/regs.h
create mode 100644 arch/riscv/include/asm/arch-jh7110/spl.h
create mode 100644 board/starfive/visionfive2/Kconfig
create mode 100644 board/starfive/visionfive2/MAINTAINERS
create mode 100644 board/starfive/visionfive2/Makefile
create mode 100644 board/starfive/visionfive2/spl.c
create mode 100644 board/starfive/visionfive2/starfive_visionfive2.c
create mode 100644 configs/starfive_visionfive2_defconfig
create mode 100644 doc/board/starfive/index.rst
create mode 100644 doc/board/starfive/visionfive2.rst
create mode 100644 drivers/clk/starfive/Kconfig
create mode 100644 drivers/clk/starfive/Makefile
create mode 100644 drivers/clk/starfive/clk-jh7110-pll.c
create mode 100644 drivers/clk/starfive/clk-jh7110.c
create mode 100644 drivers/clk/starfive/clk.h
create mode 100644 drivers/pinctrl/starfive/Kconfig
create mode 100644 drivers/pinctrl/starfive/Makefile
create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-aon.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-sys.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.h
create mode 100644 drivers/ram/starfive/Kconfig
create mode 100644 drivers/ram/starfive/Makefile
create mode 100644 drivers/ram/starfive/ddrcsr_boot.c
create mode 100644 drivers/ram/starfive/ddrphy_start.c
create mode 100644 drivers/ram/starfive/ddrphy_train.c
create mode 100644 drivers/ram/starfive/ddrphy_utils.c
create mode 100644 drivers/ram/starfive/starfive_ddr.c
create mode 100644 drivers/ram/starfive/starfive_ddr.h
create mode 100644 drivers/reset/reset-jh7110.c
create mode 100644 include/configs/starfive-visionfive2.h
create mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h
create mode 100644 include/dt-bindings/pinctrl/pinctrl-starfive-jh7110.h
create mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h
Best regards,
Leo
next reply other threads:[~2023-04-21 0:41 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-21 0:41 Leo Liang [this message]
2023-04-23 16:15 ` [PULL] u-boot-riscv/master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2025-10-29 7:38 Leo Liang
2025-10-29 18:07 ` Tom Rini
2025-07-17 7:02 Leo Liang
2025-07-17 19:02 ` Tom Rini
2025-06-02 8:31 Leo Liang
2025-06-02 22:36 ` Tom Rini
2024-09-10 2:38 Leo Liang
2024-09-10 17:22 ` Tom Rini
2023-10-19 11:41 Leo Liang
2023-10-19 14:57 ` Tom Rini
2023-10-05 8:10 Leo Liang
2023-10-05 17:46 ` Tom Rini
2023-09-26 5:21 Leo Liang
2023-09-26 14:05 ` Tom Rini
2023-09-21 1:36 Leo Liang
2023-09-21 19:57 ` Tom Rini
2023-09-05 3:30 Leo Liang
2023-09-05 18:43 ` Tom Rini
2023-08-10 10:32 Leo Liang
2023-08-10 16:22 ` Tom Rini
2023-08-02 5:48 Leo Liang
2023-08-02 6:27 ` Bin Meng
2023-08-02 9:31 ` Leo Liang
2023-08-03 0:59 ` Minda Chen
2023-07-24 8:01 Leo Liang
2023-07-24 16:41 ` Tom Rini
2023-07-12 6:58 Leo Liang
2023-07-12 19:43 ` Tom Rini
2023-02-17 12:12 Leo Liang
2023-02-17 15:01 ` Tom Rini
2023-02-19 6:09 ` Leo Liang
2023-02-02 6:30 Leo Liang
2023-02-02 19:18 ` Tom Rini
2022-12-08 11:23 Leo Liang
2022-12-08 16:24 ` Tom Rini
2022-11-16 6:16 Leo Liang
2022-11-16 18:01 ` Tom Rini
2022-11-03 7:04 Leo Liang
2022-11-03 16:57 ` Tom Rini
2022-11-04 0:28 ` Leo Liang
2022-10-20 12:36 Leo Liang
2022-10-20 19:03 ` Tom Rini
2022-09-06 6:07 Leo Liang
2022-09-06 15:50 ` Tom Rini
2022-08-11 21:38 Leo Liang
2022-08-12 12:17 ` Tom Rini
2022-05-27 2:36 Leo Liang
2022-05-27 13:30 ` Tom Rini
2022-05-28 9:02 ` Leo Liang
2022-05-30 15:05 ` Tom Rini
2022-08-11 22:22 ` Leo Liang
2022-04-06 4:43 Leo Liang
2022-04-06 15:55 ` Tom Rini
2022-03-16 2:56 Leo Liang
2022-03-16 14:48 ` Tom Rini
2022-02-10 15:16 Leo Liang
2022-02-11 0:35 ` Tom Rini
2021-12-03 6:19 Leo Liang
2021-12-04 17:50 ` Tom Rini
2021-11-09 2:40 Leo Liang
2021-11-09 13:45 ` Tom Rini
2021-10-20 7:14 Leo Liang
2021-10-21 11:51 ` Tom Rini
2021-10-07 11:51 Leo Liang
2021-10-07 15:43 ` Tom Rini
2021-09-07 8:20 Leo Liang
2021-09-07 15:33 ` Tom Rini
2021-08-19 8:56 Leo Liang
2021-08-19 14:13 ` Tom Rini
2021-07-22 2:15 Leo Liang
2021-07-22 12:15 ` Tom Rini
2021-07-07 15:21 Leo Liang
2021-07-07 17:33 ` Tom Rini
2021-07-06 16:02 Leo Liang
2021-07-06 19:52 ` Tom Rini
2021-07-07 4:05 ` Tianrui Wei
2021-06-17 3:31 Leo Liang
2021-06-17 14:51 ` Tom Rini
2021-05-31 10:16 Leo Liang
2021-05-31 18:59 ` Tom Rini
2021-05-26 8:12 Leo Liang
2021-05-26 15:24 ` Tom Rini
2021-05-27 8:57 ` Green Wan
2021-05-27 10:41 ` Leo Liang
2021-05-27 11:20 ` Tom Rini
2021-05-27 13:56 ` Green Wan
2021-05-20 2:19 Leo Liang
2021-05-21 14:07 ` Tom Rini
2021-05-18 1:48 Leo Liang
2021-05-18 18:17 ` Tom Rini
2021-05-14 11:10 Leo Liang
2021-05-14 12:23 ` Bin Meng
2021-05-15 12:09 ` Tom Rini
2021-05-07 1:06 Leo Liang
2021-05-07 1:09 ` Tom Rini
2021-05-07 1:41 ` Leo Liang
2021-05-07 1:55 ` Sean Anderson
2021-05-07 16:15 ` Tom Rini
2021-05-07 14:21 ` Dimitri John Ledkov
2021-05-07 14:35 ` Tom Rini
2021-05-07 1:49 ` Sean Anderson
2021-05-10 6:57 ` Leo Liang
2021-05-07 15:37 ` Tom Rini
2021-04-08 10:44 Leo Liang
2021-04-08 19:36 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZEHbqoEXAB+BAtmo@ubuntu01 \
--to=ycliang@andestech.com \
--cc=rick@andestech.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.