serial console broken on Ultra 5

All of lore.kernel.org
 help / color / mirror / Atom feed

* serial console broken on Ultra 5
@ 2006-07-31 12:43 Meelis Roos
  2006-07-31 12:48 ` Meelis Roos
                   ` (22 more replies)
  0 siblings, 23 replies; 24+ messages in thread
From: Meelis Roos @ 2006-07-31 12:43 UTC (permalink / raw)
  To: sparclinux

Just tried 2.6.18-rc3 on my Ultra 5 using serial console. It hangs after 
telling ttyS0 is the console. No response to break either, and booting 
with -p does not give anythig more.

PROMLIB: Sun IEEE Boot Prom 'OBP 3.31.0 2001/07/25 20:36'
PROMLIB: Root node compatible:
Linux version 2.6.18-rc3 (mroos@mandariin) (gcc version 4.1.2 20060715 (prerelease) (Debian 4.1.1-9)) #137 Mon Jul 31 15:09:20o6
ARCH: SUN4U
Ethernet address: 08:00:20:f8:c7:72
PROM: Built device tree with 41786 bytes of memory.
CPU[0]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(262144):line_sz(64)]
Built 1 zonelists.  Total pages: 40377
Kernel command line: root=/dev/hda1 ro
PID hash table entries: 2048 (order: 11, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 5, 262144 bytes)
Memory: 319584k available (2288k kernel code, 1072k data, 128k init) [fffff80000000000,0000000013f42000]
Calibrating delay using timer specific routine.. 720.46 BogoMIPS (lpj\x1440924)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing for controllers.
/pci@1f,0/pci@1,1: SABRE PCI Bus Module
/pci@1f,0/pci@1: SABRE PCI Bus Module
PCI0(PBMA): Bus running at 33MHz
PCI0(PBMB): Bus running at 33MHz
ebus0: [auxio] [power] [SUNW,pll] [se] [su] [su] [ecpp] [fdthree] 
[eeprom] [flashprom] [SUNW,CS4231]
power: Control reg at 1fff1724000 ... powerd running.
AUXIO: Found device at /pci@1f,0/pci@1,1/ebus@1/auxio@14,726000
/pci@1f,0/pci@1,1/ebus@1/eeprom@14,0: Clock regs at 000001fff1000000
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 32768 bytes)
TCP established hash table entries: 16384 (order: 5, 393216 bytes)
TCP bind hash table entries: 8192 (order: 5, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
rtc_init: no PC rtc found
/pci@1f,0/pci@1,1/ebus@1/su@14,3083f8: Keyboard port at 1fff13083f8, irq 6
/pci@1f,0/pci@1,1/ebus@1/su@14,3062f8: Mouse port at 1fff13062f8, irq 7
se@14,400000: ttyS0 at MMIO 0x1fff1400000 (irq = 5) is a SAB82532 V3.2
Console: ttyS0 (SAB82532)

-- 
Meelis Roos (mroos@linux.ee)

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
@ 2006-07-31 12:48 ` Meelis Roos
  2006-07-31 15:53 ` Marc Zyngier
                   ` (21 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Meelis Roos @ 2006-07-31 12:48 UTC (permalink / raw)
  To: sparclinux

> se@14,400000: ttyS0 at MMIO 0x1fff1400000 (irq = 5) is a SAB82532 V3.2
> Console: ttyS0 (SAB82532)

Here 2.6.17 just tells about the detection of ttyS1.

-- 
Meelis Roos (mroos@linux.ee)

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
  2006-07-31 12:48 ` Meelis Roos
@ 2006-07-31 15:53 ` Marc Zyngier
  2006-07-31 20:47 ` David Miller
                   ` (20 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Marc Zyngier @ 2006-07-31 15:53 UTC (permalink / raw)
  To: sparclinux

>>>>> "Meelis" = Meelis Roos <mroos@linux.ee> writes:

Meelis> Just tried 2.6.18-rc3 on my Ultra 5 using serial console. It
Meelis> hangs after telling ttyS0 is the console. No response to break
Meelis> either, and booting with -p does not give anythig more.

This is odd. 2.6.18-rc3 works fine here on E250 and Ultra-5, both with
serial console...

Compiler problem? I see you're using a recent 4.1... Here's my
/proc/version:

Linux version 2.6.18-rc3 (maz@because) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #3 Mon Jul 31 17:02:01 CEST 2006

	M.
-- 
And if you don't know where you're going, any road will take you there...

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
  2006-07-31 12:48 ` Meelis Roos
  2006-07-31 15:53 ` Marc Zyngier
@ 2006-07-31 20:47 ` David Miller
  2006-08-01  7:10 ` Jurij Smakov
                   ` (19 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: David Miller @ 2006-07-31 20:47 UTC (permalink / raw)
  To: sparclinux

From: Meelis Roos <mroos@linux.ee>
Date: Mon, 31 Jul 2006 15:43:22 +0300 (EEST)

> Linux version 2.6.18-rc3 (mroos@mandariin) (gcc version 4.1.2 20060715 (prerelease) (Debian 4.1.1-9)) #137 Mon Jul 31 15:09:20o6

Retry with gcc-4.0.x please.

Debian's 4.1.x sparc gcc couldn't even build the sun partition
handling code corrently just a few months ago.

Therefore, my confidence in Debian's 4.1.x compiler is basically nil.

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (2 preceding siblings ...)
  2006-07-31 20:47 ` David Miller
@ 2006-08-01  7:10 ` Jurij Smakov
  2006-08-01  7:15 ` Meelis Roos
                   ` (18 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Jurij Smakov @ 2006-08-01  7:10 UTC (permalink / raw)
  To: sparclinux

Hi David,

On Mon, 31 Jul 2006, David Miller wrote:

> From: Meelis Roos <mroos@linux.ee>
> Date: Mon, 31 Jul 2006 15:43:22 +0300 (EEST)
>
>> Linux version 2.6.18-rc3 (mroos@mandariin) (gcc version 4.1.2 20060715 (prerelease) (Debian 4.1.1-9)) #137 Mon Jul 31 15:09:20o6
>
> Retry with gcc-4.0.x please.
>
> Debian's 4.1.x sparc gcc couldn't even build the sun partition
> handling code corrently just a few months ago.

Last few releases of 2.6.17 for unstable have been built with gcc 4.1, and 
no major problems related to the compiler switch were reported.

Best regards,

Jurij Smakov                                        jurij@wooyd.org
Key: http://www.wooyd.org/pgpkey/                   KeyID: C99E03CC



^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (3 preceding siblings ...)
  2006-08-01  7:10 ` Jurij Smakov
@ 2006-08-01  7:15 ` Meelis Roos
  2006-08-02  8:07 ` Meelis Roos
                   ` (17 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Meelis Roos @ 2006-08-01  7:15 UTC (permalink / raw)
  To: sparclinux

>> Retry with gcc-4.0.x please.

Yes, I will install 4.0 and try.

>> Debian's 4.1.x sparc gcc couldn't even build the sun partition
>> handling code corrently just a few months ago.
>
> Last few releases of 2.6.17 for unstable have been built with gcc 4.1, and no 
> major problems related to the compiler switch were reported.

Debian's 2.6.17-1 package works fine indeed.

-- 
Meelis Roos

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (4 preceding siblings ...)
  2006-08-01  7:15 ` Meelis Roos
@ 2006-08-02  8:07 ` Meelis Roos
  2006-08-02  8:09 ` David Miller
                   ` (16 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Meelis Roos @ 2006-08-02  8:07 UTC (permalink / raw)
  To: sparclinux

>> Linux version 2.6.18-rc3 (mroos@mandariin) (gcc version 4.1.2 20060715 (prerelease) (Debian 4.1.1-9)) #137 Mon Jul 31 15:09:20o6
>
> Retry with gcc-4.0.x please.

Same hang exactly.

My config:

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18-rc3
# Tue Aug  1 16:48:03 2006
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
# CONFIG_SPARC64_PAGE_SIZE_512KB is not set
# CONFIG_SPARC64_PAGE_SIZE_4MB is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ%0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT2

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Block layer
#
CONFIG_BLK_DEV_IO_TRACE=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_SYSVIPC_COMPAT=y
CONFIG_GENERIC_HARDIRQS=y

#
# General machine setup
#
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_CPU_FREQ is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_LARGE_ALLOCS=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_BINFMT_ELF32=y
# CONFIG_BINFMT_AOUT32 is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_SOLARIS_EMUL=m
# CONFIG_CMDLINE_BOOL is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
CONFIG_IP_ROUTE_MULTIPATH_RR=m
CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_DRR=m
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
CONFIG_IP_NF_SIP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_NAT_H323=m
CONFIG_IP_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
CONFIG_NET_SCH_CLK_CPU=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK2
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=m
CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_TASK_IOCTL=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set

#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE%3
CONFIG_AIC7XXX_RESET_DELAY_MSP00
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
CONFIG_MEGARAID_LEGACY=m
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=m
CONFIG_SCSI_SATA_AHCI=m
CONFIG_SCSI_SATA_SVW=m
CONFIG_SCSI_ATA_PIIX=m
CONFIG_SCSI_SATA_MV=m
CONFIG_SCSI_SATA_NV=m
CONFIG_SCSI_PDC_ADMA=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_SATA_QSTOR=m
CONFIG_SCSI_SATA_PROMISE=m
CONFIG_SCSI_SATA_SX4=m
CONFIG_SCSI_SATA_SIL=m
CONFIG_SCSI_SATA_SIL24=m
CONFIG_SCSI_SATA_SIS=m
CONFIG_SCSI_SATA_ULI=m
CONFIG_SCSI_SATA_VIA=m
CONFIG_SCSI_SATA_VITESSE=m
CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS\x16
CONFIG_SCSI_SYM53C8XX_MAX_TAGSd
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLOGICPTI is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SUNESP is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set

#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_IFB=m
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_SUNLANCE is not set
CONFIG_HAPPYMEAL=y
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_NET_WIRELESS=y

#
# Wan interfaces
#
# CONFIG_WAN is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X\x1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Yv8
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_SPARCSPKR=y
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#

#
# Non-8250 serial port support
#
CONFIG_SERIAL_SUNCORE=y
# CONFIG_SERIAL_SUNZILOG is not set
CONFIG_SERIAL_SUNSU=y
CONFIG_SERIAL_SUNSU_CONSOLE=y
CONFIG_SERIAL_SUNSAB=y
CONFIG_SERIAL_SUNSAB_CONSOLE=y
CONFIG_SERIAL_SUNHV=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_WATCHDOG_CP1XXX is not set
# CONFIG_WATCHDOG_RIO is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set

#
# Misc devices
#

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y

#
# Video Capture Adapters
#

#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_SAA6588 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set

#
# Encoders and Decoders
#
CONFIG_VIDEO_MSP3400=m
# CONFIG_VIDEO_CS53L32A is not set
CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_WM8775=m
# CONFIG_VIDEO_WM8739 is not set
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_SAA711X=m
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set

#
# V4L USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_24XXX=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
# CONFIG_VIDEO_EM28XX is not set
CONFIG_USB_DSBR=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_USB_DABUSB=m

#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_SBUS is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_PCI=y
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
# CONFIG_PROM_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_SUN8x16=y
# CONFIG_FONT_SUN12x22 is not set

#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_SUN_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
# CONFIG_LCD_CLASS_DEVICE is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
CONFIG_SND_BT87X_OVERCLOCK=y
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m

#
# ALSA Sparc devices
#
# CONFIG_SND_SUN_AMD7930 is not set
CONFIG_SND_SUN_CS4231=m
# CONFIG_SND_SUN_DBRI is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_MON is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ANYDATA=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# LED devices
#
# CONFIG_NEW_LEDS is not set

#
# LED drivers
#

#
# LED Triggers
#

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#

#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
CONFIG_RTC_INTF_DEV_UIE_EMUL=y

#
# RTC drivers
#
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set

#
# DMA Clients
#

#
# DMA Devices
#

#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=m
CONFIG_SUN_MOSTEK_RTC=y
CONFIG_OBP_FLASH=m
# CONFIG_SUN_BPP is not set
# CONFIG_BBC_I2C is not set
# CONFIG_ENVCTRL is not set
# CONFIG_DISPLAY7SEG is not set

#
# Fibre Channel support
#
# CONFIG_FC4 is not set

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGEw5
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=m
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_UPCALL=y
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT\x16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
CONFIG_UNWIND_INFO=y
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_BOOTMEM is not set
# CONFIG_DEBUG_PAGEALLOC is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y

-- 
Meelis Roos (mroos@linux.ee)

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (5 preceding siblings ...)
  2006-08-02  8:07 ` Meelis Roos
@ 2006-08-02  8:09 ` David Miller
  2006-08-03  9:27 ` Daniel Smolik
                   ` (15 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: David Miller @ 2006-08-02  8:09 UTC (permalink / raw)
  To: sparclinux

From: Meelis Roos <mroos@linux.ee>
Date: Wed, 2 Aug 2006 11:07:15 +0300 (EEST)

> >> Linux version 2.6.18-rc3 (mroos@mandariin) (gcc version 4.1.2 20060715 (prerelease) (Debian 4.1.1-9)) #137 Mon Jul 31 15:09:20o6
> >
> > Retry with gcc-4.0.x please.
> 
> Same hang exactly.

Thanks for testing, I'll look into it.

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (6 preceding siblings ...)
  2006-08-02  8:09 ` David Miller
@ 2006-08-03  9:27 ` Daniel Smolik
  2006-08-03  9:34 ` David Miller
                   ` (14 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Daniel Smolik @ 2006-08-03  9:27 UTC (permalink / raw)
  To: sparclinux

Marc Zyngier napsal(a):
>>>>>>"Meelis" = Meelis Roos <mroos@linux.ee> writes:
> 
> 
> Meelis> Just tried 2.6.18-rc3 on my Ultra 5 using serial console. It
> Meelis> hangs after telling ttyS0 is the console. No response to break
> Meelis> either, and booting with -p does not give anythig more.
> 
> This is odd. 2.6.18-rc3 works fine here on E250 and Ultra-5, both with
> serial console...
> 
> Compiler problem? I see you're using a recent 4.1... Here's my
> /proc/version:
> 
> Linux version 2.6.18-rc3 (maz@because) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #3 Mon Jul 31 17:02:01 CEST 2006
> 
> 	M.

I test 2.6.18-rc2 over rsc console and I see nothing after 
Uncompresing Linux.... With 2.6.17.2 work well. E250 Debian Sid.
I will test 18rc-3 and see.

				Dan

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (7 preceding siblings ...)
  2006-08-03  9:27 ` Daniel Smolik
@ 2006-08-03  9:34 ` David Miller
  2006-08-03 11:33 ` Marc Zyngier
                   ` (13 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: David Miller @ 2006-08-03  9:34 UTC (permalink / raw)
  To: sparclinux

From: Daniel Smolik <marvin@mydatex.cz>
Date: Thu, 03 Aug 2006 11:27:50 +0200

> I test 2.6.18-rc2 over rsc console and I see nothing after 
> Uncompresing Linux.... With 2.6.17.2 work well. E250 Debian Sid.
> I will test 18rc-3 and see.

There was an E250 serial console bug fixed recently.

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (8 preceding siblings ...)
  2006-08-03  9:34 ` David Miller
@ 2006-08-03 11:33 ` Marc Zyngier
  2006-08-03 15:11 ` Daniel Smolik
                   ` (12 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Marc Zyngier @ 2006-08-03 11:33 UTC (permalink / raw)
  To: sparclinux

>>>>> "Daniel" = Daniel Smolik <marvin@mydatex.cz> writes:

Daniel> I test 2.6.18-rc2 over rsc console and I see nothing after
Daniel> Uncompresing Linux.... With 2.6.17.2 work well. E250 Debian Sid.
Daniel> I will test 18rc-3 and see.

As David wrote, there was some fixes to E250 serial console introduced
between rc2 and rc3.

Please note that I didn't test RSC console though (I don't trust RSC
enough to let it handle my console directly, and I only use it to
power-on/reset the machine remotely).

	M.
-- 
And if you don't know where you're going, any road will take you there...

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (9 preceding siblings ...)
  2006-08-03 11:33 ` Marc Zyngier
@ 2006-08-03 15:11 ` Daniel Smolik
  2006-08-03 15:49 ` Daniel Smolik
                   ` (11 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Daniel Smolik @ 2006-08-03 15:11 UTC (permalink / raw)
  To: sparclinux

Marc Zyngier napsal(a):
>>>>>>"Daniel" = Daniel Smolik <marvin@mydatex.cz> writes:
> 
> 
> Daniel> I test 2.6.18-rc2 over rsc console and I see nothing after
> Daniel> Uncompresing Linux.... With 2.6.17.2 work well. E250 Debian Sid.
> Daniel> I will test 18rc-3 and see.
> 
> As David wrote, there was some fixes to E250 serial console introduced
> between rc2 and rc3.
> 
> Please note that I didn't test RSC console though (I don't trust RSC
> enough to let it handle my console directly, and I only use it to
> power-on/reset the machine remotely).
> 
> 	M.

Yes I understatd. I compile 2.6.18-rc2 and PROM console via rsc didn't 
work :-( and my E250 with the same config as 2.6.17.2 didn't boot but 
I don't know why because I haven't console :-).


			Dan


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (10 preceding siblings ...)
  2006-08-03 15:11 ` Daniel Smolik
@ 2006-08-03 15:49 ` Daniel Smolik
  2006-08-03 16:30 ` Marc Zyngier
                   ` (10 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Daniel Smolik @ 2006-08-03 15:49 UTC (permalink / raw)
  To: sparclinux

Daniel Smolik napsal(a):
> Marc Zyngier napsal(a):
> 
>>>>>>> "Daniel" = Daniel Smolik <marvin@mydatex.cz> writes:
>>
>>
>>
>> Daniel> I test 2.6.18-rc2 over rsc console and I see nothing after
>> Daniel> Uncompresing Linux.... With 2.6.17.2 work well. E250 Debian Sid.
>> Daniel> I will test 18rc-3 and see.
>>
>> As David wrote, there was some fixes to E250 serial console introduced
>> between rc2 and rc3.
>>
>> Please note that I didn't test RSC console though (I don't trust RSC
>> enough to let it handle my console directly, and I only use it to
>> power-on/reset the machine remotely).
>>
>>     M.
> 
> 
> Yes I understatd. I compile 2.6.18-rc2 and PROM console via rsc didn't 
Sorry 2.6.18-rc3 of course   ^^^^^^^^^^^

			Dan



> work :-( and my E250 with the same config as 2.6.17.2 didn't boot but I 
> don't know why because I haven't console :-).
> 
> 
>             Dan
> 
> -
> To unsubscribe from this list: send the line "unsubscribe sparclinux" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (11 preceding siblings ...)
  2006-08-03 15:49 ` Daniel Smolik
@ 2006-08-03 16:30 ` Marc Zyngier
  2006-08-03 22:24 ` Daniel Smolik
                   ` (9 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Marc Zyngier @ 2006-08-03 16:30 UTC (permalink / raw)
  To: sparclinux

>>>>> "Daniel" = Daniel Smolik <marvin@mydatex.cz> writes:

>> Yes I understatd. I compile 2.6.18-rc2 and PROM console via rsc
>> didn't
Daniel> Sorry 2.6.18-rc3 of course   ^^^^^^^^^^^

Care to share your .config? Can you try booting with '-p'?

	M.
-- 
And if you don't know where you're going, any road will take you there...

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (12 preceding siblings ...)
  2006-08-03 16:30 ` Marc Zyngier
@ 2006-08-03 22:24 ` Daniel Smolik
  2006-08-04 16:34 ` Marc Zyngier
                   ` (8 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Daniel Smolik @ 2006-08-03 22:24 UTC (permalink / raw)
  To: sparclinux

[-- Attachment #1: Type: text/plain, Size: 4491 bytes --]

Marc Zyngier napsal(a):
>>>>>>"Daniel" == Daniel Smolik <marvin@mydatex.cz> writes:
> 
> 
>>>Yes I understatd. I compile 2.6.18-rc2 and PROM console via rsc
>>>didn't
> 
> Daniel> Sorry 2.6.18-rc3 of course   ^^^^^^^^^^^
> 
> Care to share your .config? Can you try booting with '-p'?
> 
> 	M.

Yes I can. I don't know what is "-p"  and it is very nice thing :-)
I get this:

Loaded kernel version 2.6.18

PROMLIB: Sun IEEE Boot Prom 'OBP 3.30.0 2003/11/11 10:37'
PROMLIB: Root node compatible: sun4u
Linux version 2.6.18-rc3 (root@sunik) (gcc version 4.1.2 20060729 (prerelease) ( 
                                                       Debian 4.1.1-10)) #1 Thu 
Aug 3 15:22:51 CEST 2006
ARCH: SUN4U
Ethernet address: 08:00:20:c4:0d:36
Remapping the kernel... done.
PROM: Built device tree with 71570 bytes of memory.
Booting Linux...
CPU[0]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(2097152):l 
                                                       ine_sz(64)]
Built 1 zonelists.  Total pages: 64966
Kernel command line: root=/dev/sdb1 ro video=pm2fb:mode:800x600-60,font:SUN12x22 
                                                       ,ypan devfs=nomount 
elevator=anticipatory -p
PID hash table entries: 2048 (order: 11, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 5, 262144 bytes)
Memory: 514528k available (2032k kernel code, 672k data, 128k init) [fffff800000 
                                                       00000,000000001feb0000]
Calibrating delay using timer specific routine.. 800.26 BogoMIPS (lpj=4001327)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing for controllers.
Console: switching to mono PROM 80x34
/pci@1f,4000/ebus@1/su@14,3083f8: Keyboard port at 1fff13083f8, irq 9
/pci@1f,4000/ebus@1/su@14,3062f8: Mouse port at 1fff13062f8, irq 10
se@14,400000: ttyS0 at MMIO 0x1fff1400000 (irq = 7) is a SAB82532 V3.2
Console: ttyS2 (SAB82532)
               \|/ ____ \|/
               "@'/ .. \`@"
               /_| \__/ |_\
                  \__U_/
swapper(1): TL0: Kernel divide by zero. [#1]
TSTATE: 0000000080f01606 TPC: 0000000000557f3c TNPC: 0000000000557f40 Y: 0000000 
                                                       0    Not tainted 

TPC: <sunsab_convert_to_sab+0x184/0x220>
g0: fffffffff0071b18 g1: 0000000000000000 g2: 0000000000000015 g3: 0000000000000 
                                                       000 

g4: fffff8001fe819e0 g5: 0000000000000000 g6: fffff8001fd80000 g7: 0000000000000 
                                                       008 

o0: fffff8001fe6e5b0 o1: 0000000000001cb2 o2: 0000000000000000 o3: 0000000000663 
                                                       800 

o4: 0000000000000001 o5: 0000000000663810 sp: fffff8001fd82dc1 ret_pc: 000000000 
                                                       0558360 

RPC: <sunsab_startup+0x208/0x220>
l0: fffff8001fe6e660 l1: 000000000001c200 l2: 0000000000000000 l3: fffff8001fea6 
                                                       960 

l4: fffff8001fea6880 l5: 0000000000000000 l6: fffff8001f8ad6d0 l7: 0000000000000 
                                                       000
i0: fffff8001fe6e5b0 i1: 0000000000001cb2 i2: 0000000000000000 i3: 000000000001c 
                                                       200
i4: 0000000000000000 i5: fffff8001f8b7e60 i6: fffff8001fd82e81 i7: 0000000000559 
                                                       224
I7: <sunsab_console_setup+0x10c/0x1c0>
Caller[0000000000559224]: sunsab_console_setup+0x10c/0x1c0
Caller[000000000044dc00]: register_console+0x208/0x280
Caller[0000000000552fa8]: uart_add_one_port+0x290/0x2e0
Caller[000000000055938c]: sab_probe+0xb4/0xe0
Caller[0000000000429ba8]: of_device_probe+0x50/0x80
Caller[000000000055bbe0]: driver_probe_device+0x48/0xe0
Caller[000000000055bce0]: __driver_attach+0x68/0x80
Caller[000000000055b5fc]: bus_for_each_dev+0x44/0x80
Caller[000000000055b0a8]: bus_add_driver+0x70/0x140
Caller[0000000000416f24]: init+0x8c/0x2e0
Caller[0000000000417a50]: kernel_thread+0x38/0x60
Caller[0000000000417190]: rest_init+0x18/0x40
Instruction DUMP: 90100018  93366000  81802000 <9470400a> 7fffe9c8  9532a000  c2 
                                                       0e20d0  90102004  920620b0
Kernel panic - not syncing: Attempted to kill init!
  <0>Press Stop-A (L1-A) to return to the boot prom


[-- Attachment #2: config_sun --]
[-- Type: text/plain, Size: 30113 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18-rc3
# Thu Aug  3 14:06:44 2006
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
# CONFIG_SPARC64_PAGE_SIZE_512KB is not set
# CONFIG_SPARC64_PAGE_SIZE_4MB is not set
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Block layer
#
# CONFIG_BLK_DEV_IO_TRACE is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_SYSVIPC_COMPAT=y
CONFIG_GENERIC_HARDIRQS=y

#
# General machine setup
#
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_US3_FREQ=m
CONFIG_US2E_FREQ=m
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_LARGE_ALLOCS=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_BINFMT_ELF32=y
CONFIG_BINFMT_AOUT32=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_SUNOS_EMUL=y
CONFIG_SOLARIS_EMUL=m
# CONFIG_CMDLINE_BOOL is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y

#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not set
# CONFIG_IP_VS_PROTO_UDP is not set
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NETFILTER_XTABLES is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not set
# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_SUNBPP=m
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_CMD64X=m
# CONFIG_BLK_DEV_TRIFLEX is not set
CONFIG_BLK_DEV_CY82C693=m
# CONFIG_BLK_DEV_CS5520 is not set
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT34X=m
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
# CONFIG_PDC202XX_BURST is not set
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m

#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLOGICPTI=m
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SUNESP=m

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
CONFIG_IEEE1394_EXPORT_FULL_API=y

#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_SUNLANCE=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNBMAC=m
CONFIG_SUNQE=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_MYRI_SBUS=m
CONFIG_NS83820=m
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_SK98LIN=m
CONFIG_TIGON3=m
CONFIG_BNX2=m

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_SHAPER=m
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_SPARCSPKR=m
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=m
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#

#
# Non-8250 serial port support
#
CONFIG_SERIAL_SUNCORE=y
CONFIG_SERIAL_SUNZILOG=m
CONFIG_SERIAL_SUNSU=y
CONFIG_SERIAL_SUNSU_CONSOLE=y
CONFIG_SERIAL_SUNSAB=y
CONFIG_SERIAL_SUNSAB_CONSOLE=y
# CONFIG_SERIAL_SUNHV is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_RTC=m
# CONFIG_DTLK is not set
CONFIG_R3964=m
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m

#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_HWMON_DEBUG_CHIP=y

#
# Misc devices
#

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_SBUS is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_PCI=y
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_PROM_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y

#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_SUN_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# ALSA Sparc devices
#
CONFIG_SND_SUN_AMD7930=m
CONFIG_SND_SUN_CS4231=m
CONFIG_SND_SUN_DBRI=m

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#

#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
CONFIG_RTC_INTF_DEV_UIE_EMUL=y

#
# RTC drivers
#
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_TEST=m
CONFIG_RTC_DRV_V3020=m

#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set

#
# DMA Clients
#

#
# DMA Devices
#

#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=y
CONFIG_SUN_MOSTEK_RTC=y
CONFIG_OBP_FLASH=m
CONFIG_SUN_BPP=m
CONFIG_BBC_I2C=m
CONFIG_ENVCTRL=m
CONFIG_DISPLAY7SEG=m

#
# Fibre Channel support
#
CONFIG_FC4=m

#
# FC4 drivers
#
CONFIG_FC4_SOC=m
CONFIG_FC4_SOCAL=m

#
# FC4 targets
#
CONFIG_SCSI_PLUTO=m
CONFIG_SCSI_FCAL=m

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=852
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-2"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set

#
# Network File Systems
#
# CONFIG_NFS_FS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-2"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
# CONFIG_UNWIND_INFO is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_PLIST=y

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (13 preceding siblings ...)
  2006-08-03 22:24 ` Daniel Smolik
@ 2006-08-04 16:34 ` Marc Zyngier
  2006-08-04 17:58 ` Daniel Smolik
                   ` (7 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Marc Zyngier @ 2006-08-04 16:34 UTC (permalink / raw)
  To: sparclinux

>>>>> "Daniel" = Daniel Smolik <marvin@mydatex.cz> writes:

Daniel> TPC: <sunsab_convert_to_sab+0x184/0x220>

This looks weird to me.

Could you please print the 'baud' and 'quot' variables at the
beginning of sunsab_convert_to_sab? I suspect 'quot' being set to 0...

If possible, please try with gcc 4.0.x as well, it may help.

	M.
-- 
And if you don't know where you're going, any road will take you there...

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (14 preceding siblings ...)
  2006-08-04 16:34 ` Marc Zyngier
@ 2006-08-04 17:58 ` Daniel Smolik
  2006-08-04 18:08 ` Marc Zyngier
                   ` (6 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Daniel Smolik @ 2006-08-04 17:58 UTC (permalink / raw)
  To: sparclinux

Marc Zyngier napsal(a):
>>>>>>"Daniel" = Daniel Smolik <marvin@mydatex.cz> writes:
> 
> 
> Daniel> TPC: <sunsab_convert_to_sab+0x184/0x220>
> 
> This looks weird to me.
> 
> Could you please print the 'baud' and 'quot' variables at the
> beginning of sunsab_convert_to_sab? I suspect 'quot' being set to 0...
Yes you are right there is new output:


Console: switching to mono PROM 80x34
/pci@1f,4000/ebus@1/su@14,3083f8: Keyboard port at 1fff13083f8, irq 9
/pci@1f,4000/ebus@1/su@14,3062f8: Mouse port at 1fff13062f8, irq 10
se@14,400000: ttyS0 at MMIO 0x1fff1400000 (irq = 7) is a SAB82532 V3.2
Console: ttyS2 (SAB82532)
SUNSAB baud:115200 quot:0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^this is added by me  as you want. 

               \|/ ____ \|/
               "@'/ .. \`@"
               /_| \__/ |_\
                  \__U_/
swapper(1): TL0: Kernel divide by zero. [#1]
TSTATE: 0000000080f01606 TPC: 0000000000557f50 TNPC: 0000000000557f54 Y: 0000000 
          0    Not tainted 

TPC: <sunsab_convert_to_sab+0x198/0x220>
g0: 0000000000000000 g1: 0000000000000000 g2: 0000000000000015 g3: 0000000000000 
          000 

g4: fffff8001fe819e0 g5: 0000000000000000 g6: fffff8001fd80000 g7: 0000000000000 
          008 

o0: fffff8001fe6e5b0 o1: 0000000000001cb2 o2: 0000000000000000 o3: 0000000000663 
          800 

o4: 0000000000000001 o5: 0000000000663810 sp: fffff8001fd82dc1 ret_pc: 000000000 
          0557dd0 

RPC: <sunsab_convert_to_sab+0x18/0x220>
l0: fffff8001fe6e660 l1: 000000000001c200 l2: 0000000000000000 l3: fffff8001fea6 
          960
l4: fffff8001fea6880 l5: 0000000000000000 l6: fffff8001f9cf6d0 l7: 0000000000000 
          000
i0: fffff8001fe6e5b0 i1: 0000000000001cb2 i2: 0000000000000000 i3: 000000000001c 
          200
i4: 0000000000000000 i5: fffff8001f9cde60 i6: fffff8001fd82e81 i7: 0000000000559 
          224
I7: <sunsab_console_setup+0x10c/0x1c0>
Caller[0000000000559224]: sunsab_console_setup+0x10c/0x1c0
Caller[000000000044dc00]: register_console+0x208/0x280
Caller[0000000000552fa8]: uart_add_one_port+0x290/0x2e0
Caller[000000000055938c]: sab_probe+0xb4/0xe0
Caller[0000000000429ba8]: of_device_probe+0x50/0x80
Caller[000000000055bbe0]: driver_probe_device+0x48/0xe0
Caller[000000000055bce0]: __driver_attach+0x68/0x80
Caller[000000000055b5fc]: bus_for_each_dev+0x44/0x80
Caller[000000000055b0a8]: bus_add_driver+0x70/0x140
Caller[0000000000416f24]: init+0x8c/0x2e0
Caller[0000000000417a50]: kernel_thread+0x38/0x60
Caller[0000000000417190]: rest_init+0x18/0x40
Instruction DUMP: 90100018  93366000  81802000 <9470400a> 7fffe9c3  9532a000  c2 
          0e20d0  90102004  920620b0
Kernel panic - not syncing: Attempted to kill init!
  <0>Press Stop-A (L1-A) to return to the boot prom






> 
> If possible, please try with gcc 4.0.x as well, it may help.
I try it but I must find how switch  to another compiler I have Debian Sid.

	Dan



> 
> 	M.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (15 preceding siblings ...)
  2006-08-04 17:58 ` Daniel Smolik
@ 2006-08-04 18:08 ` Marc Zyngier
  2006-08-04 20:08 ` Daniel Smolik
                   ` (5 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Marc Zyngier @ 2006-08-04 18:08 UTC (permalink / raw)
  To: sparclinux

>>>>> "Daniel" = Daniel Smolik <marvin@mydatex.cz> writes:

Daniel> Console: switching to mono PROM 80x34
Daniel> /pci@1f,4000/ebus@1/su@14,3083f8: Keyboard port at 1fff13083f8, irq 9
Daniel> /pci@1f,4000/ebus@1/su@14,3062f8: Mouse port at 1fff13062f8, irq 10
Daniel> se@14,400000: ttyS0 at MMIO 0x1fff1400000 (irq = 7) is a SAB82532 V3.2
Daniel> Console: ttyS2 (SAB82532)
Daniel> SUNSAB baud:115200 quot:0
Daniel> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^this is added by me  as you want.

Ok, that's indeed what I suspected... Looks like the RSC setting have
some adverse effect on the uart_get_divisor() logic.

I'll try to give it a look.

Thanks for the report,

	M.
-- 
And if you don't know where you're going, any road will take you there...

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (16 preceding siblings ...)
  2006-08-04 18:08 ` Marc Zyngier
@ 2006-08-04 20:08 ` Daniel Smolik
  2006-08-04 21:46 ` Marc Zyngier
                   ` (4 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Daniel Smolik @ 2006-08-04 20:08 UTC (permalink / raw)
  To: sparclinux

Marc Zyngier napsal(a):
>>>>>>"Daniel" = Daniel Smolik <marvin@mydatex.cz> writes:
> 
> 
> Daniel> Console: switching to mono PROM 80x34
> Daniel> /pci@1f,4000/ebus@1/su@14,3083f8: Keyboard port at 1fff13083f8, irq 9
> Daniel> /pci@1f,4000/ebus@1/su@14,3062f8: Mouse port at 1fff13062f8, irq 10
> Daniel> se@14,400000: ttyS0 at MMIO 0x1fff1400000 (irq = 7) is a SAB82532 V3.2
> Daniel> Console: ttyS2 (SAB82532)
> Daniel> SUNSAB baud:115200 quot:0
> Daniel> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^this is added by me  as you want.
> 
> Ok, that's indeed what I suspected... Looks like the RSC setting have
> some adverse effect on the uart_get_divisor() logic.
> 
> I'll try to give it a look.
> 
> Thanks for the report,
> 
> 	M.
There is kernel compiled with gcc-4.0.
Dan



Loaded kernel version 2.6.18

PROMLIB: Sun IEEE Boot Prom 'OBP 3.30.0 2003/11/11 10:37'
PROMLIB: Root node compatible: sun4u
Linux version 2.6.18-rc3 (root@sunik) (gcc version 4.0.4 20060730 (prerelease) ( 
              Debian 4.0.3-6)) #3 Fri Aug 4 21:46:49 CEST 2006
ARCH: SUN4U
Ethernet address: 08:00:20:c4:0d:36
Remapping the kernel... done.
PROM: Built device tree with 71570 bytes of memory.
Booting Linux...
CPU[0]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(2097152):l 
              ine_sz(64)]
Built 1 zonelists.  Total pages: 64967
Kernel command line: root=/dev/sdb1 ro video=pm2fb:mode:800x600-60,font:SUN12x22 
              ,ypan devfs=nomount elevator=anticipatory -p
PID hash table entries: 2048 (order: 11, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 5, 262144 bytes)
Memory: 514528k available (2032k kernel code, 672k data, 128k init) [fffff800000 
              00000,000000001feb0000]
Calibrating delay using timer specific routine.. 800.26 BogoMIPS (lpj@01343)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing for controllers.
Console: switching to mono PROM 80x34
/pci@1f,4000/ebus@1/su@14,3083f8: Keyboard port at 1fff13083f8, irq 9
/pci@1f,4000/ebus@1/su@14,3062f8: Mouse port at 1fff13062f8, irq 10
se@14,400000: ttyS0 at MMIO 0x1fff1400000 (irq = 7) is a SAB82532 V3.2
Console: ttyS2 (SAB82532)                                      \|/ ____ \|/ 

               "@'/ .. \`@"
               /_| \__/ |_\
                  \__U_/
swapper(1): TL0: Kernel divide by zero. [#1]
TSTATE: 0000000080f01606 TPC: 0000000000557864 TNPC: 0000000000557868 Y: 0000000 
              0    Not tainted 

TPC: <sunsab_convert_to_sab+0x18c/0x240>
g0: 0000000000000000 g1: 0000000000000000 g2: 0000000000000056 g3: 0000000000000 
              000 

g4: fffff8001fe819e0 g5: 0000000000000000 g6: fffff8001fd80000 g7: 0000000000000 
              000 

o0: fffff8001fe6c5b0 o1: 0000000000001cb2 o2: 0000000000000000 o3: 0000000000660 
              c00 

o4: 0000000000000001 o5: 0000000000660eb8 sp: fffff8001fd82dc1 ret_pc: 000000000 
              05576f0 

RPC: <sunsab_convert_to_sab+0x18/0x240>
l0: fffff8001fe6c660 l1: ffffffffffffffff l2: 0000000000431c00 l3: 0000000000000 
              000
l4: 0000000000000000 l5: fffff8001fa6fe60 l6: 0000000000000000 l7: 0000000000000 
              008
i0: fffff8001fe6c5b0 i1: 0000000000001cb2 i2: 0000000000000000 i3: 000000000001c 
              200
i4: 0000000000000000 i5: fffff8001fa71748 i6: fffff8001fd82e81 i7: 0000000000558 
              cc4
I7: <sunsab_console_setup+0x10c/0x1c0>
Caller[0000000000558cc4]: sunsab_console_setup+0x10c/0x1c0
Caller[000000000044dce4]: register_console+0x20c/0x280
Caller[00000000005532a8]: uart_add_one_port+0x290/0x2e0
Caller[0000000000557cec]: sab_probe+0xb4/0xe0
Caller[00000000004292a8]: of_device_probe+0x50/0x80
Caller[000000000055b4e0]: driver_probe_device+0x48/0xe0
Caller[000000000055b5e0]: __driver_attach+0x68/0x80
Caller[000000000055a7dc]: bus_for_each_dev+0x44/0x80
Caller[000000000055ad08]: bus_add_driver+0x70/0x140
Caller[0000000000416f64]: init+0x8c/0x2e0
Caller[0000000000417f50]: kernel_thread+0x38/0x60
Caller[0000000000416e50]: rest_init+0x18/0x40
Instruction DUMP: 90100018  93366000  81802000 <9470400a> 7fffe99e  9532a000  c2 
              0e20d0  90102004  920620b0
Kernel panic - not syncing: Attempted to kill init!
  <0>Press Stop-A (L1-A) to return to the boot prom


SUNSAB baud:115200 quot:0

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (17 preceding siblings ...)
  2006-08-04 20:08 ` Daniel Smolik
@ 2006-08-04 21:46 ` Marc Zyngier
  2006-08-04 22:22 ` Daniel Smolik
                   ` (3 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Marc Zyngier @ 2006-08-04 21:46 UTC (permalink / raw)
  To: sparclinux

>>>>> "Daniel" = Daniel Smolik <marvin@mydatex.cz> writes:

Daniel> se@14,400000: ttyS0 at MMIO 0x1fff1400000 (irq = 7) is a SAB82532 V3.2
                      ^^^^^
Daniel> Console: ttyS2 (SAB82532)
                 ^^^^^
Daniel> SUNSAB baud:115200 quot:0

Ok, I managed to reproduce it on my own setup. Looks like the kernel
insists on having the first serial port as a console, even if it know
is has to be the third... Of course, as ttyS2 has not been probed yet,
it all goes to Nowhereland...

I'll try to cook up a patch during the week-end if the weather is bad
enough. In the meantime, you should be able to boot with
"console=ttyS0 -p". At least, you'll have your console messages on the
RSC console, and you'll probably be able to remote login.

	M.
-- 
And if you don't know where you're going, any road will take you there...

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (18 preceding siblings ...)
  2006-08-04 21:46 ` Marc Zyngier
@ 2006-08-04 22:22 ` Daniel Smolik
  2006-10-11 14:54 ` Meelis Roos
                   ` (2 subsequent siblings)
  22 siblings, 0 replies; 24+ messages in thread
From: Daniel Smolik @ 2006-08-04 22:22 UTC (permalink / raw)
  To: sparclinux

Marc Zyngier napsal(a):
>>>>>>"Daniel" = Daniel Smolik <marvin@mydatex.cz> writes:
> 
> 
> Daniel> se@14,400000: ttyS0 at MMIO 0x1fff1400000 (irq = 7) is a SAB82532 V3.2
>                       ^^^^^
> Daniel> Console: ttyS2 (SAB82532)
>                  ^^^^^
> Daniel> SUNSAB baud:115200 quot:0
> 
> Ok, I managed to reproduce it on my own setup. Looks like the kernel
> insists on having the first serial port as a console, even if it know
> is has to be the third... Of course, as ttyS2 has not been probed yet,
> it all goes to Nowhereland...
> 
> I'll try to cook up a patch during the week-end if the weather is bad
> enough. In the meantime, you should be able to boot with
> "console=ttyS0 -p". At least, you'll have your console messages on the
> RSC console, and you'll probably be able to remote login.
> 
> 	M.
Yes you are right. Now it boots.


		Dan
PS: in Prague is bad weather too :-)


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (19 preceding siblings ...)
  2006-08-04 22:22 ` Daniel Smolik
@ 2006-10-11 14:54 ` Meelis Roos
  2006-10-12  9:37 ` David Miller
  2006-10-13  6:55 ` Meelis Roos
  22 siblings, 0 replies; 24+ messages in thread
From: Meelis Roos @ 2006-10-11 14:54 UTC (permalink / raw)
  To: sparclinux

>>>> Linux version 2.6.18-rc3 (mroos@mandariin) (gcc version 4.1.2 20060715 (prerelease) (Debian 4.1.1-9)) #137 Mon Jul 31 15:09:20o6
>>>
>>> Retry with gcc-4.0.x please.
>>
>> Same hang exactly.
>
> Thanks for testing, I'll look into it.

I have narrowed it down to a specific config option - 
CONFIG_DEBUG_SPINLOCK. When I enable it, the hang occurs, and when I 
disable it, everything works fine. Currently at 2.6.19-rc1 + git as of 
yesterday.

-- 
Meelis Roos (mroos@linux.ee)

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (20 preceding siblings ...)
  2006-10-11 14:54 ` Meelis Roos
@ 2006-10-12  9:37 ` David Miller
  2006-10-13  6:55 ` Meelis Roos
  22 siblings, 0 replies; 24+ messages in thread
From: David Miller @ 2006-10-12  9:37 UTC (permalink / raw)
  To: sparclinux

From: Meelis Roos <mroos@linux.ee>
Date: Wed, 11 Oct 2006 17:54:46 +0300 (EEST)

> >>>> Linux version 2.6.18-rc3 (mroos@mandariin) (gcc version 4.1.2 20060715 (prerelease) (Debian 4.1.1-9)) #137 Mon Jul 31 15:09:20o6
> >>>
> >>> Retry with gcc-4.0.x please.
> >>
> >> Same hang exactly.
> >
> > Thanks for testing, I'll look into it.
> 
> I have narrowed it down to a specific config option - 
> CONFIG_DEBUG_SPINLOCK. When I enable it, the hang occurs, and when I 
> disable it, everything works fine. Currently at 2.6.19-rc1 + git as of 
> yesterday.

I wonder if there is some problem with the spinlock debug
spin timeout.

Let's say that triggers while outputting a console message
over the serial console, that will just recurse into the
serial layer and deadlock.

We do take locks during console output in the sunsab console
implementation, and I'm pretty sure sunsab is which serial
line your console would be using on an ultra5 as the SU
ports are used for keyboard and mouse.

Actually, thinking about it some more I bet it's not a
spin lock debugging timeout.  What instead might trigger
a problem is spin_lock_init() being invoked a second time
on the UART port->lock while it is already held.

There is some tricky logic in the serial layer that tries
to deal with the fact that console setup can occur before
a UART port is registered.  It is trying to make sure
spin_lock_init(&port->lock) occurs before it could ever
be used.

In order to do that it explicitly initializes the lock in the console
setup (indirectly via uart_set_options). Actually, sunsab doesn't use
that helper function so sunsab's console setup function does the
spin_lock_init() explicitly.

Anyways, at UART port add time, the core serial layer does this:

	/*
	 * If this port is a console, then the spinlock is already
	 * initialised.
	 */
	if (!(uart_console(port) && (port->cons->flags & CON_ENABLED))) {
		spin_lock_init(&port->lock);
		lockdep_set_class(&port->lock, &port_lock_key);
	}

in order to avoid initializing the spinlock twice.

But actually what will happen currently is the following:

1) sunsab will register the sunsab driver, fine
2) uart_add_one_port() will get called, since the console
   didn't get registered yet, CON_ENABLED bit won't bet
   set so uart_add_one_port() will initialize the spinlock
   with the spin_lock_init() call quoted above
3) later in uart_add_one_port() it will do this:
	if (port->type != PORT_UNKNOWN &&
	    port->cons && !(port->cons->flags & CON_ENABLED))
		register_console(port->cons);
   which will invoke sunsab_console_setup()
4) sunsab_console_setup() will initialize the port spinlock
   again

I wonder if that is what causes the problems.  Just for a test
can you retry with DEBUG_SPINLOCK enabled and the following
patch?  I'm not very optimistic actually, because this double
init should be harmless.

Thanks.

diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 08a7cd6..f21b187 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -916,11 +916,6 @@ static int sunsab_console_setup(struct c
 	};

 	/*
-	 * Temporary fix.
-	 */
-	spin_lock_init(&up->port.lock);
-
-	/*
 	 * Initialize the hardware
 	 */
 	sunsab_startup(&up->port);

^ permalink raw reply related	[flat|nested] 24+ messages in thread

* Re: serial console broken on Ultra 5
  2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
                   ` (21 preceding siblings ...)
  2006-10-12  9:37 ` David Miller
@ 2006-10-13  6:55 ` Meelis Roos
  22 siblings, 0 replies; 24+ messages in thread
From: Meelis Roos @ 2006-10-13  6:55 UTC (permalink / raw)
  To: sparclinux

> I wonder if that is what causes the problems.  Just for a test
> can you retry with DEBUG_SPINLOCK enabled and the following
> patch?  I'm not very optimistic actually, because this double
> init should be harmless.

Still hangs :(

-- 
Meelis Roos (mroos@linux.ee)

^ permalink raw reply	[flat|nested] 24+ messages in thread

end of thread, other threads:[~2006-10-13  6:55 UTC | newest]

Thread overview: 24+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
2006-07-31 12:48 ` Meelis Roos
2006-07-31 15:53 ` Marc Zyngier
2006-07-31 20:47 ` David Miller
2006-08-01  7:10 ` Jurij Smakov
2006-08-01  7:15 ` Meelis Roos
2006-08-02  8:07 ` Meelis Roos
2006-08-02  8:09 ` David Miller
2006-08-03  9:27 ` Daniel Smolik
2006-08-03  9:34 ` David Miller
2006-08-03 11:33 ` Marc Zyngier
2006-08-03 15:11 ` Daniel Smolik
2006-08-03 15:49 ` Daniel Smolik
2006-08-03 16:30 ` Marc Zyngier
2006-08-03 22:24 ` Daniel Smolik
2006-08-04 16:34 ` Marc Zyngier
2006-08-04 17:58 ` Daniel Smolik
2006-08-04 18:08 ` Marc Zyngier
2006-08-04 20:08 ` Daniel Smolik
2006-08-04 21:46 ` Marc Zyngier
2006-08-04 22:22 ` Daniel Smolik
2006-10-11 14:54 ` Meelis Roos
2006-10-12  9:37 ` David Miller
2006-10-13  6:55 ` Meelis Roos

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.