From: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 09/14] mx5 clocks: Fix get_ipg_per_clk()
Date: Fri, 28 Sep 2012 14:55:25 +0200 (CEST) [thread overview]
Message-ID: <461266343.5418513.1348836925163.JavaMail.root@advansee.com> (raw)
In-Reply-To: <50657FCB.7020300@denx.de>
Hi Stefano,
On Friday, September 28, 2012 12:45:31 PM, Stefano Babic wrote:
> On 28/09/2012 12:42, Beno?t Th?baudeau wrote:
> > Hi Stefano,
> >
> > On Friday, September 28, 2012 11:31:11 AM, Stefano Babic wrote:
> >> On 27/09/2012 22:23, Beno?t Th?baudeau wrote:
> >>> This fixes the "IPG PERCLK" frequency printed by the clocks
> >>> command. The issue
> >>> was that get_ipg_per_clk() used periph_clk instead of lp_apm in
> >>> the
> >>> case
> >>> CCM.CBCMR.perclk_lp_apm_sel is set.
> >>>
> >>> It also fixes I?C support.
> >>>
> >>
> >> Hi Beno?t,
> >>
> >> I understand "clocks" reports a wrong value only if
> >> CCM.CBCMR.perclk_lp_apm_sel is set, not always.
> >
> > Correct.
> >
> >> Can you better explain me which is wrong and which is the fix for
> >> I2C
> >> ?
> >> It seems unrelated, and I do not get the reason checking the patch
> >
> > It's only because mxc_get_clock(MXC_IPG_CLK) (or
> > mxc_get_clock(MXC_I2C_CLK)
> > after [1]) both return get_ipg_per_clk() for the I?C driver's
> > clock.
>
> Ah, thanks - it is clear now.
For the full story, I?C was completely broken on my custom i.MX51 platform
because of this issue. The command "i2c probe" only detected address 0x00, and
if run again, it hung.
Best regards,
Beno?t
next prev parent reply other threads:[~2012-09-28 12:55 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-14 18:05 [U-Boot] [PATCH 00/10] mx5: Fix clocks Benoît Thébaudeau
2012-08-14 18:06 ` [U-Boot] [PATCH 01/10] mx5: Undeclare imx_decode_pll() Benoît Thébaudeau
2012-08-23 9:10 ` Stefano Babic
2012-08-14 18:06 ` [U-Boot] [PATCH 02/10] mx5: Use explicit clock gate names Benoît Thébaudeau
2012-08-14 18:54 ` Marek Vasut
2012-08-14 19:13 ` Benoît Thébaudeau
2012-09-27 20:19 ` [U-Boot] [PATCH v2 01/14] mx5/6: Define default SoC input clock frequencies Benoît Thébaudeau
2012-09-27 20:20 ` [U-Boot] [PATCH v2 02/14] mx5 clocks: Cleanup Benoît Thébaudeau
2012-09-28 8:44 ` Stefano Babic
2012-09-27 20:21 ` [U-Boot] [PATCH v2 03/14] mx5: Use explicit clock gate names Benoît Thébaudeau
2012-09-28 8:53 ` Stefano Babic
2012-09-27 20:21 ` [U-Boot] [PATCH v2 04/14] mx5: Fix clock gate values Benoît Thébaudeau
2012-09-27 20:21 ` [U-Boot] [PATCH v2 05/14] mx51: Fix USB PHY clocks Benoît Thébaudeau
2012-09-27 20:47 ` Marek Vasut
2012-09-28 7:26 ` Igor Grinberg
2012-09-28 10:27 ` Benoît Thébaudeau
2012-09-28 10:43 ` Stefano Babic
2012-09-28 13:00 ` Benoît Thébaudeau
2012-09-28 15:02 ` Stefano Babic
2012-09-28 17:09 ` [U-Boot] [PATCH v3 " Benoît Thébaudeau
2012-10-02 8:35 ` Igor Grinberg
2012-09-27 20:22 ` [U-Boot] [PATCH v2 06/14] mx5 clocks: Add and use CCSR definitions Benoît Thébaudeau
2012-09-27 20:22 ` [U-Boot] [PATCH v2 07/14] mx5 clocks: Fix get_lp_apm() Benoît Thébaudeau
2012-09-27 20:22 ` [U-Boot] [PATCH v2 08/14] mx5 clocks: Fix get_periph_clk() Benoît Thébaudeau
2012-09-27 20:23 ` [U-Boot] [PATCH v2 09/14] mx5 clocks: Fix get_ipg_per_clk() Benoît Thébaudeau
2012-09-28 9:31 ` Stefano Babic
2012-09-28 10:42 ` Benoît Thébaudeau
2012-09-28 10:45 ` Stefano Babic
2012-09-28 12:55 ` Benoît Thébaudeau [this message]
2012-09-28 15:01 ` Stefano Babic
2012-09-27 20:23 ` [U-Boot] [PATCH v2 10/14] mx5 clocks: Fix get_uart_clk() Benoît Thébaudeau
2012-09-27 20:23 ` [U-Boot] [PATCH v2 11/14] mx5 clocks: Simplify imx_get_cspiclk() Benoît Thébaudeau
2012-09-27 20:23 ` [U-Boot] [PATCH v2 12/14] mx5 clocks: Fix MXC_FEC_CLK Benoît Thébaudeau
2012-09-27 20:24 ` [U-Boot] [PATCH v2 13/14] mx51: Fix I2C clock ID check Benoît Thébaudeau
2012-09-27 20:24 ` [U-Boot] [PATCH v2 14/14] mx5/6 clocks: Fix SDHC clocks Benoît Thébaudeau
2012-09-28 8:42 ` [U-Boot] [PATCH v2 01/14] mx5/6: Define default SoC input clock frequencies Stefano Babic
2012-09-30 10:28 ` Stefano Babic
2012-09-30 13:55 ` Benoît Thébaudeau
2012-09-30 14:05 ` Stefano Babic
2012-08-14 18:06 ` [U-Boot] [PATCH 03/10] mx5 clocks: Add and use CCSR definitions Benoît Thébaudeau
2012-08-14 18:55 ` Marek Vasut
2012-08-14 19:14 ` Benoît Thébaudeau
2012-08-14 19:11 ` Marek Vasut
2012-08-14 18:07 ` [U-Boot] [PATCH 04/10] mx5 clocks: Fix get_lp_apm() Benoît Thébaudeau
2012-08-14 18:07 ` [U-Boot] [PATCH 05/10] mx5 clocks: Fix get_periph_clk() Benoît Thébaudeau
2012-08-14 18:07 ` [U-Boot] [PATCH 06/10] mx5 clocks: Fix get_ipg_per_clk() Benoît Thébaudeau
2012-08-14 18:07 ` [U-Boot] [PATCH 07/10] mx5 clocks: Fix get_uart_clk() Benoît Thébaudeau
2012-08-20 9:52 ` Stefano Babic
2012-08-20 10:05 ` Stefano Babic
2012-08-14 18:07 ` [U-Boot] [PATCH 08/10] mx5 clocks: Simplify imx_get_cspiclk() Benoît Thébaudeau
2012-08-14 18:08 ` [U-Boot] [PATCH 09/10] mx5 clocks: Fix eSDHC clock Benoît Thébaudeau
2012-08-14 18:08 ` [U-Boot] [PATCH 10/10] mx5 clocks: Fix MXC_FEC_CLK Benoît Thébaudeau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=461266343.5418513.1348836925163.JavaMail.root@advansee.com \
--to=benoit.thebaudeau@advansee.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.