From: Matthew Gyurgyik <matthew@pyther.net>
To: Antti Palosaari <crope@iki.fi>
Cc: "Frank Schäfer" <fschaefer.oss@googlemail.com>,
"Devin Heitmueller" <dheitmueller@kernellabs.com>,
linux-media@vger.kernel.org
Subject: Re: em28xx: msi Digivox ATSC board id [0db0:8810]
Date: Wed, 05 Dec 2012 16:35:53 -0500 [thread overview]
Message-ID: <50BFBE39.90901@pyther.net> (raw)
In-Reply-To: <50BF3F9A.3020803@iki.fi>
On 12/05/2012 07:35 AM, Antti Palosaari wrote:
>
> There is something really wrong.
>
> I am not at US expert but why the hell
> us-Cable-Standard-center-frequencies-QAM256 scans up to 999MHz whilst
> demodulator max is set 858? Either one is wrong.
>
> Also, demod seems to be HAS_LOCK about all the time. As that basic
> LOCK flag is simply false you cannot even thing if there is correct
> configuration on TS interface. If you start zapping that known channel
> and then unplug & plug antenna cable did you see still all the time
> HAS_LOCK? (it should disappear when antenna cable is unplugged).
>
> regards
> Antti
>
When I disconnected the coax cable, the lock went away. When I
reconnected FE_HAS_LOCK came back.
http://pyther.net/a/digivox_atsc/patch3/azap_disconnect_coax.txt
next prev parent reply other threads:[~2012-12-05 21:35 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-28 2:31 em28xx: msi Digivox ATSC board id [0db0:8810] Matthew Gyurgyik
2012-11-28 20:47 ` Frank Schäfer
2012-11-28 22:29 ` Matthew Gyurgyik
2012-11-28 22:55 ` Antti Palosaari
2012-11-29 2:05 ` Matthew Gyurgyik
2012-11-29 2:15 ` Antti Palosaari
2012-11-29 19:28 ` Frank Schäfer
2012-11-29 19:46 ` Antti Palosaari
2012-11-30 1:45 ` Matthew Gyurgyik
2012-12-02 11:44 ` Frank Schäfer
2012-12-02 14:23 ` Antti Palosaari
2012-12-02 17:18 ` Frank Schäfer
2012-12-03 18:16 ` Frank Schäfer
2012-12-04 2:15 ` Matthew Gyurgyik
2012-12-04 2:29 ` Devin Heitmueller
2012-12-04 2:42 ` Matthew Gyurgyik
2012-12-04 2:58 ` Devin Heitmueller
2012-12-04 21:06 ` Frank Schäfer
2012-12-05 3:41 ` Matthew Gyurgyik
2012-12-05 12:35 ` Antti Palosaari
2012-12-05 21:35 ` Matthew Gyurgyik [this message]
2012-12-05 22:01 ` Antti Palosaari
2012-12-05 22:33 ` Matthew Gyurgyik
2012-12-06 0:55 ` Antti Palosaari
2012-12-06 2:16 ` Matthew Gyurgyik
2012-12-06 21:49 ` Frank Schäfer
2012-12-06 21:57 ` Devin Heitmueller
2012-12-06 22:01 ` Frank Schäfer
2012-12-06 22:03 ` Devin Heitmueller
2012-12-06 22:12 ` Frank Schäfer
2012-12-06 22:41 ` Matthew Gyurgyik
2012-12-06 22:58 ` Matthew Gyurgyik
2012-12-07 1:40 ` Matthew Gyurgyik
2012-12-07 3:21 ` Devin Heitmueller
2012-12-07 11:49 ` Matthew Gyurgyik
2012-12-08 13:52 ` Frank Schäfer
2012-12-08 14:10 ` Matthew Gyurgyik
2012-12-08 15:20 ` Frank Schäfer
[not found] ` <50C3701D.9000700@pyther .net>
[not found] ` <50C37DA8.4080608@googlemai l.com>
[not found] ` <50C3B3EB.40606@pyther .net>
[not found] ` <50C3B567.3070300@i ki.fi>
2012-12-08 16:51 ` Matthew Gyurgyik
2012-12-08 17:49 ` Frank Schäfer
2012-12-08 21:40 ` Matthew Gyurgyik
2012-12-08 21:47 ` Antti Palosaari
2012-12-08 22:04 ` Matthew Gyurgyik
2012-12-09 12:48 ` Frank Schäfer
2012-12-09 14:50 ` Matthew Gyurgyik
2012-12-09 15:46 ` Devin Heitmueller
2012-12-09 16:19 ` Frank Schäfer
2012-12-09 16:23 ` Frank Schäfer
2012-12-09 17:06 ` Frank Schäfer
2012-12-09 17:53 ` Matthew Gyurgyik
2012-12-10 15:39 ` Frank Schäfer
2012-12-10 15:46 ` Devin Heitmueller
2012-12-10 16:01 ` Frank Schäfer
2012-12-10 16:13 ` Devin Heitmueller
2012-12-10 17:57 ` Antti Palosaari
2012-12-10 19:24 ` Frank Schäfer
2012-12-10 20:48 ` Antti Palosaari
2012-12-11 20:51 ` Frank Schäfer
2012-12-11 20:59 ` Antti Palosaari
2012-12-12 21:25 ` Frank Schäfer
2012-12-12 21:34 ` Frank Schäfer
2012-12-13 15:09 ` Antti Palosaari
2012-12-13 16:02 ` Frank Schäfer
2012-12-13 20:23 ` Mauro Carvalho Chehab
2012-12-14 15:33 ` Frank Schäfer
2012-12-14 16:32 ` Antti Palosaari
2012-12-14 16:40 ` Antti Palosaari
2012-12-14 19:39 ` Mauro Carvalho Chehab
2012-12-15 0:26 ` Mauro Carvalho Chehab
2012-12-15 0:34 ` Mauro Carvalho Chehab
2012-12-15 0:56 ` Antti Palosaari
2012-12-15 1:03 ` Mauro Carvalho Chehab
2012-12-15 1:12 ` Antti Palosaari
2012-12-15 1:39 ` Mauro Carvalho Chehab
2012-12-15 1:54 ` Mauro Carvalho Chehab
2012-12-15 13:11 ` Frank Schäfer
2012-12-15 13:34 ` Mauro Carvalho Chehab
2012-12-15 13:38 ` Antti Palosaari
2012-12-15 16:21 ` Frank Schäfer
2012-12-15 16:51 ` Antti Palosaari
2012-12-16 18:15 ` Frank Schäfer
2012-12-17 1:09 ` Matthew Gyurgyik
2012-12-17 1:26 ` Antti Palosaari
2012-12-17 1:37 ` Matthew Gyurgyik
2012-12-17 9:33 ` Antti Palosaari
2012-12-17 11:08 ` Antti Palosaari
2012-12-17 11:17 ` Matthew Gyurgyik
2012-12-17 12:30 ` Antti Palosaari
2012-12-17 15:53 ` Mauro Carvalho Chehab
2012-12-17 16:14 ` Mauro Carvalho Chehab
2012-12-18 2:27 ` Matthew Gyurgyik
2012-12-18 3:08 ` Matthew Gyurgyik
2013-01-02 20:59 ` Antti Palosaari
2013-01-03 2:53 ` Matthew Gyurgyik
2013-01-20 14:40 ` Matthew Gyurgyik
2013-01-20 17:46 ` Antti Palosaari
2013-02-16 23:38 ` Matthew Gyurgyik
2013-02-24 22:23 ` Antti Palosaari
2013-02-25 1:58 ` Matthew Gyurgyik
2013-01-03 0:18 ` David Härdeman
2012-12-13 20:07 ` Mauro Carvalho Chehab
2012-12-13 20:36 ` Mauro Carvalho Chehab
2012-12-13 19:57 ` Mauro Carvalho Chehab
2012-12-13 20:04 ` Mauro Carvalho Chehab
2012-12-10 16:01 ` Matthew Gyurgyik
2012-12-06 2:32 ` Matthew Gyurgyik
2012-12-06 21:52 ` Frank Schäfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50BFBE39.90901@pyther.net \
--to=matthew@pyther.net \
--cc=crope@iki.fi \
--cc=dheitmueller@kernellabs.com \
--cc=fschaefer.oss@googlemail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.