Re: em28xx: msi Digivox ATSC board id [0db0:8810]

[Antti Palosaari <crope@iki.fi>]

On 02/17/2013 01:38 AM, Matthew Gyurgyik wrote:
> On 01/20/2013 12:46 PM, Antti Palosaari wrote:
>> On 01/20/2013 04:40 PM, Matthew Gyurgyik wrote:
>>> On 01/02/2013 09:53 PM, Matthew Gyurgyik wrote:
>>>> On 01/02/2013 03:59 PM, Antti Palosaari wrote:
>>>>> On 12/18/2012 05:08 AM, Matthew Gyurgyik wrote:
>>>>>> I can test patches Tue and Wed this week. Afterwards, I probably
>>>>>> won't
>>>>>> be able to test anything until Dec 28th/29th as I will be away
>>>>>> from my
>>>>>> workstation.
>>>>>>
>>>>>> In regards to my issue compiling my kernel, it helps if I include
>>>>>> devtmpfs. :)
>>>>>
>>>>> Matthew, test? Both remote and television.
>>>>>
>>>>> http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/HU345-Q
>>>>>
>>>>>
>>>>>
>>>>> regards
>>>>> Antti
>>>>
>>>>
>>>> So using the HU345-Q branch I get the following results
>>>>
>>>> Remote:
>>>>
>>>> Using evtest it looks like all the key codes register correctly.
>>>> (KEY_1,
>>>> KEY_YELLOW, KEY_VOLUMEUP, etc...)
>>>>
>>>> However, ir_keytable fails
>>>>
>>>> [root@tux bin]# ./ir-keytable -t
>>>> Not found device rc0
>>>>
>>>> Tunning:
>>>>
>>>> I did a basic test with mplayer and tunning worked. I'll have to do
>>>> more
>>>> testing.
>>>>
>>>> Scanning:
>>>>
>>>> Running a scan resulted in a kernel panic.
>>>>
>>>> Scan command: scan -A 2 -t 1
>>>> /usr/share/dvb/atsc/us-Cable-Standard-center-frequencies-QAM256 >
>>>> ~/channels_msidigivox.conf
>>>>
>>>> Kernel Messages: http://pyther.net/a/digivox_atsc/jan02/kernel_log.txt
>>>>
>>>> Let me know what additional info I can provide. As always, I appreciate
>>>> the help!
>>>>
>>>> Thanks,
>>>> Matthew
>>>>
>>>
>>>
>>> Antti,
>>>
>>> Is there any follow up testing I could do? Is there any additional
>>> information you need from me.
>>>
>>> Thanks,
>>> Matthew
>>
>> Matthew,
>> Thank you for testing continuously! I looked it and for my eyes it works
>> as it should (both television and remote controller as you reported).
>> All those bugs you mention has no relations to that certain device. I
>> think all are general em28xx driver bugs. There has been recently quite
>> much changes done for the em28xx driver and probably some of those
>> findings are already fixed. I am not em28xx driver expert, due to that
>> it is hard to say what is wrong. I will try to make final patch soon and
>> after your test it could be sent to the mainline.
>>
>> regards
>> Antti
>>
> Any update on this?
>
> Thanks,
> Matthew

I rebased it to the latest LinuxTV 3.9. There is quite a lot of changes 
done for em28xx driver so it could work. Please test.

http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/HU345-Q

regards
Antti

-- 
http://palosaari.fi/