From: Matthew Gyurgyik <matthew@pyther.net>
To: Antti Palosaari <crope@iki.fi>
Cc: "Frank Schäfer" <fschaefer.oss@googlemail.com>,
"Devin Heitmueller" <dheitmueller@kernellabs.com>,
linux-media@vger.kernel.org
Subject: Re: em28xx: msi Digivox ATSC board id [0db0:8810]
Date: Wed, 05 Dec 2012 21:16:22 -0500 [thread overview]
Message-ID: <50BFFFF6.1000204@pyther.net> (raw)
In-Reply-To: <50BFECEA.9060808@iki.fi>
On 12/05/2012 07:55 PM, Antti Palosaari wrote:
>
> It was good snoop. I didn't saw nothing very interesting. But, I think
> I found the reason. Just add that one line writing 0x42 to register
> 0x0d. IIRC I saw earlier it caused that kind of bug...
>
> +static struct em28xx_reg_seq msi_digivox_atsc[] = {
> + {EM2874_R80_GPIO, 0xff, 0xff, 50}, /* GPIO_0=1 */
> + {0x0d, 0xff, 0xff, 0},
> + {EM2874_R80_GPIO, 0xfe, 0xff, 0}, /* GPIO_0=0 */
> {0x0d, 0x42, 0xff, 0},
> + {EM2874_R80_GPIO, 0xbe, 0xff, 135}, /* GPIO_6=0 */
> + {EM2874_R80_GPIO, 0xfe, 0xff, 135}, /* GPIO_6=1 */
> + {EM2874_R80_GPIO, 0x7e, 0xff, 20}, /* GPIO_7=0 */
> + { -1, -1, -1, -1},
> +};
>
> regards
> Antti
>
>
I added that line, recompiled, tried the new module. Unfortunately there
was no improvement. I didn't see any differences in any of the output
(dmesg, azap). Let me know if there is any info you want me to get.
Matthew
next prev parent reply other threads:[~2012-12-06 2:16 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-28 2:31 em28xx: msi Digivox ATSC board id [0db0:8810] Matthew Gyurgyik
2012-11-28 20:47 ` Frank Schäfer
2012-11-28 22:29 ` Matthew Gyurgyik
2012-11-28 22:55 ` Antti Palosaari
2012-11-29 2:05 ` Matthew Gyurgyik
2012-11-29 2:15 ` Antti Palosaari
2012-11-29 19:28 ` Frank Schäfer
2012-11-29 19:46 ` Antti Palosaari
2012-11-30 1:45 ` Matthew Gyurgyik
2012-12-02 11:44 ` Frank Schäfer
2012-12-02 14:23 ` Antti Palosaari
2012-12-02 17:18 ` Frank Schäfer
2012-12-03 18:16 ` Frank Schäfer
2012-12-04 2:15 ` Matthew Gyurgyik
2012-12-04 2:29 ` Devin Heitmueller
2012-12-04 2:42 ` Matthew Gyurgyik
2012-12-04 2:58 ` Devin Heitmueller
2012-12-04 21:06 ` Frank Schäfer
2012-12-05 3:41 ` Matthew Gyurgyik
2012-12-05 12:35 ` Antti Palosaari
2012-12-05 21:35 ` Matthew Gyurgyik
2012-12-05 22:01 ` Antti Palosaari
2012-12-05 22:33 ` Matthew Gyurgyik
2012-12-06 0:55 ` Antti Palosaari
2012-12-06 2:16 ` Matthew Gyurgyik [this message]
2012-12-06 21:49 ` Frank Schäfer
2012-12-06 21:57 ` Devin Heitmueller
2012-12-06 22:01 ` Frank Schäfer
2012-12-06 22:03 ` Devin Heitmueller
2012-12-06 22:12 ` Frank Schäfer
2012-12-06 22:41 ` Matthew Gyurgyik
2012-12-06 22:58 ` Matthew Gyurgyik
2012-12-07 1:40 ` Matthew Gyurgyik
2012-12-07 3:21 ` Devin Heitmueller
2012-12-07 11:49 ` Matthew Gyurgyik
2012-12-08 13:52 ` Frank Schäfer
2012-12-08 14:10 ` Matthew Gyurgyik
2012-12-08 15:20 ` Frank Schäfer
[not found] ` <50C3701D.9000700@pyther .net>
[not found] ` <50C37DA8.4080608@googlemai l.com>
[not found] ` <50C3B3EB.40606@pyther .net>
[not found] ` <50C3B567.3070300@i ki.fi>
2012-12-08 16:51 ` Matthew Gyurgyik
2012-12-08 17:49 ` Frank Schäfer
2012-12-08 21:40 ` Matthew Gyurgyik
2012-12-08 21:47 ` Antti Palosaari
2012-12-08 22:04 ` Matthew Gyurgyik
2012-12-09 12:48 ` Frank Schäfer
2012-12-09 14:50 ` Matthew Gyurgyik
2012-12-09 15:46 ` Devin Heitmueller
2012-12-09 16:19 ` Frank Schäfer
2012-12-09 16:23 ` Frank Schäfer
2012-12-09 17:06 ` Frank Schäfer
2012-12-09 17:53 ` Matthew Gyurgyik
2012-12-10 15:39 ` Frank Schäfer
2012-12-10 15:46 ` Devin Heitmueller
2012-12-10 16:01 ` Frank Schäfer
2012-12-10 16:13 ` Devin Heitmueller
2012-12-10 17:57 ` Antti Palosaari
2012-12-10 19:24 ` Frank Schäfer
2012-12-10 20:48 ` Antti Palosaari
2012-12-11 20:51 ` Frank Schäfer
2012-12-11 20:59 ` Antti Palosaari
2012-12-12 21:25 ` Frank Schäfer
2012-12-12 21:34 ` Frank Schäfer
2012-12-13 15:09 ` Antti Palosaari
2012-12-13 16:02 ` Frank Schäfer
2012-12-13 20:23 ` Mauro Carvalho Chehab
2012-12-14 15:33 ` Frank Schäfer
2012-12-14 16:32 ` Antti Palosaari
2012-12-14 16:40 ` Antti Palosaari
2012-12-14 19:39 ` Mauro Carvalho Chehab
2012-12-15 0:26 ` Mauro Carvalho Chehab
2012-12-15 0:34 ` Mauro Carvalho Chehab
2012-12-15 0:56 ` Antti Palosaari
2012-12-15 1:03 ` Mauro Carvalho Chehab
2012-12-15 1:12 ` Antti Palosaari
2012-12-15 1:39 ` Mauro Carvalho Chehab
2012-12-15 1:54 ` Mauro Carvalho Chehab
2012-12-15 13:11 ` Frank Schäfer
2012-12-15 13:34 ` Mauro Carvalho Chehab
2012-12-15 13:38 ` Antti Palosaari
2012-12-15 16:21 ` Frank Schäfer
2012-12-15 16:51 ` Antti Palosaari
2012-12-16 18:15 ` Frank Schäfer
2012-12-17 1:09 ` Matthew Gyurgyik
2012-12-17 1:26 ` Antti Palosaari
2012-12-17 1:37 ` Matthew Gyurgyik
2012-12-17 9:33 ` Antti Palosaari
2012-12-17 11:08 ` Antti Palosaari
2012-12-17 11:17 ` Matthew Gyurgyik
2012-12-17 12:30 ` Antti Palosaari
2012-12-17 15:53 ` Mauro Carvalho Chehab
2012-12-17 16:14 ` Mauro Carvalho Chehab
2012-12-18 2:27 ` Matthew Gyurgyik
2012-12-18 3:08 ` Matthew Gyurgyik
2013-01-02 20:59 ` Antti Palosaari
2013-01-03 2:53 ` Matthew Gyurgyik
2013-01-20 14:40 ` Matthew Gyurgyik
2013-01-20 17:46 ` Antti Palosaari
2013-02-16 23:38 ` Matthew Gyurgyik
2013-02-24 22:23 ` Antti Palosaari
2013-02-25 1:58 ` Matthew Gyurgyik
2013-01-03 0:18 ` David Härdeman
2012-12-13 20:07 ` Mauro Carvalho Chehab
2012-12-13 20:36 ` Mauro Carvalho Chehab
2012-12-13 19:57 ` Mauro Carvalho Chehab
2012-12-13 20:04 ` Mauro Carvalho Chehab
2012-12-10 16:01 ` Matthew Gyurgyik
2012-12-06 2:32 ` Matthew Gyurgyik
2012-12-06 21:52 ` Frank Schäfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50BFFFF6.1000204@pyther.net \
--to=matthew@pyther.net \
--cc=crope@iki.fi \
--cc=dheitmueller@kernellabs.com \
--cc=fschaefer.oss@googlemail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.