From: Antti Palosaari <crope@iki.fi>
To: Matthew Gyurgyik <matthew@pyther.net>
Cc: "Frank Schäfer" <fschaefer.oss@googlemail.com>,
"Devin Heitmueller" <dheitmueller@kernellabs.com>,
"Linux Media Mailing List" <linux-media@vger.kernel.org>
Subject: Re: em28xx: msi Digivox ATSC board id [0db0:8810]
Date: Sat, 08 Dec 2012 23:47:19 +0200 [thread overview]
Message-ID: <50C3B567.3070300@iki.fi> (raw)
In-Reply-To: <50C3B3EB.40606@pyther.net>
On 12/08/2012 11:40 PM, Matthew Gyurgyik wrote:
> On 12/08/2012 12:49 PM, Frank Schäfer wrote:
>> Am 08.12.2012 17:51, schrieb Matthew Gyurgyik:
>>
>> That shouldn't be necessary. I just noticed that there is a module
>> parameter 'ir_debug'. ;)
>> With ir_debug enabled, you should see messages
>>
>> em28xx_ir_handle_key: toggle: XX, count: XX, key XXYYZZ
>>
>> everytime you press a button. Once we know the key codes, we can set up
>> a key map (if it doesn't exist yet).
>>
>
> Maybe I'm doing something wrong but didn't have any luck :(
>
>> [root@tux ~]# sudo rmmod em28xx_rc
>> [root@tux ~]# sudo rmmod em28xx_dvb
>> [root@tux ~]# sudo rmmod em28xx
>> [root@tux ~]# modprobe em28xx_rc ir_debug=1
>
> I don't see any additional messages in dmesg.
>
> I verified the remote still works in windows (a stupidity check on my part)
Maybe Kernel debugs are not enabled? em28xx driver is a little bit
legacy in logging too as it uses own logging whilst nowadays dynamic
logging is recommended.
replace KERN_DEBUG as KERN_INFO inside em28xx-input.c and test. It will
change driver to use Kernel normal log writings instead of current debug
ones.
regards
Antti
--
http://palosaari.fi/
next prev parent reply other threads:[~2012-12-08 21:47 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-28 2:31 em28xx: msi Digivox ATSC board id [0db0:8810] Matthew Gyurgyik
2012-11-28 20:47 ` Frank Schäfer
2012-11-28 22:29 ` Matthew Gyurgyik
2012-11-28 22:55 ` Antti Palosaari
2012-11-29 2:05 ` Matthew Gyurgyik
2012-11-29 2:15 ` Antti Palosaari
2012-11-29 19:28 ` Frank Schäfer
2012-11-29 19:46 ` Antti Palosaari
2012-11-30 1:45 ` Matthew Gyurgyik
2012-12-02 11:44 ` Frank Schäfer
2012-12-02 14:23 ` Antti Palosaari
2012-12-02 17:18 ` Frank Schäfer
2012-12-03 18:16 ` Frank Schäfer
2012-12-04 2:15 ` Matthew Gyurgyik
2012-12-04 2:29 ` Devin Heitmueller
2012-12-04 2:42 ` Matthew Gyurgyik
2012-12-04 2:58 ` Devin Heitmueller
2012-12-04 21:06 ` Frank Schäfer
2012-12-05 3:41 ` Matthew Gyurgyik
2012-12-05 12:35 ` Antti Palosaari
2012-12-05 21:35 ` Matthew Gyurgyik
2012-12-05 22:01 ` Antti Palosaari
2012-12-05 22:33 ` Matthew Gyurgyik
2012-12-06 0:55 ` Antti Palosaari
2012-12-06 2:16 ` Matthew Gyurgyik
2012-12-06 21:49 ` Frank Schäfer
2012-12-06 21:57 ` Devin Heitmueller
2012-12-06 22:01 ` Frank Schäfer
2012-12-06 22:03 ` Devin Heitmueller
2012-12-06 22:12 ` Frank Schäfer
2012-12-06 22:41 ` Matthew Gyurgyik
2012-12-06 22:58 ` Matthew Gyurgyik
2012-12-07 1:40 ` Matthew Gyurgyik
2012-12-07 3:21 ` Devin Heitmueller
2012-12-07 11:49 ` Matthew Gyurgyik
2012-12-08 13:52 ` Frank Schäfer
2012-12-08 14:10 ` Matthew Gyurgyik
2012-12-08 15:20 ` Frank Schäfer
[not found] ` <50C3701D.9000700@pyther .net>
[not found] ` <50C37DA8.4080608@googlemai l.com>
[not found] ` <50C3B3EB.40606@pyther .net>
[not found] ` <50C3B567.3070300@i ki.fi>
2012-12-08 16:51 ` Matthew Gyurgyik
2012-12-08 17:49 ` Frank Schäfer
2012-12-08 21:40 ` Matthew Gyurgyik
2012-12-08 21:47 ` Antti Palosaari [this message]
2012-12-08 22:04 ` Matthew Gyurgyik
2012-12-09 12:48 ` Frank Schäfer
2012-12-09 14:50 ` Matthew Gyurgyik
2012-12-09 15:46 ` Devin Heitmueller
2012-12-09 16:19 ` Frank Schäfer
2012-12-09 16:23 ` Frank Schäfer
2012-12-09 17:06 ` Frank Schäfer
2012-12-09 17:53 ` Matthew Gyurgyik
2012-12-10 15:39 ` Frank Schäfer
2012-12-10 15:46 ` Devin Heitmueller
2012-12-10 16:01 ` Frank Schäfer
2012-12-10 16:13 ` Devin Heitmueller
2012-12-10 17:57 ` Antti Palosaari
2012-12-10 19:24 ` Frank Schäfer
2012-12-10 20:48 ` Antti Palosaari
2012-12-11 20:51 ` Frank Schäfer
2012-12-11 20:59 ` Antti Palosaari
2012-12-12 21:25 ` Frank Schäfer
2012-12-12 21:34 ` Frank Schäfer
2012-12-13 15:09 ` Antti Palosaari
2012-12-13 16:02 ` Frank Schäfer
2012-12-13 20:23 ` Mauro Carvalho Chehab
2012-12-14 15:33 ` Frank Schäfer
2012-12-14 16:32 ` Antti Palosaari
2012-12-14 16:40 ` Antti Palosaari
2012-12-14 19:39 ` Mauro Carvalho Chehab
2012-12-15 0:26 ` Mauro Carvalho Chehab
2012-12-15 0:34 ` Mauro Carvalho Chehab
2012-12-15 0:56 ` Antti Palosaari
2012-12-15 1:03 ` Mauro Carvalho Chehab
2012-12-15 1:12 ` Antti Palosaari
2012-12-15 1:39 ` Mauro Carvalho Chehab
2012-12-15 1:54 ` Mauro Carvalho Chehab
2012-12-15 13:11 ` Frank Schäfer
2012-12-15 13:34 ` Mauro Carvalho Chehab
2012-12-15 13:38 ` Antti Palosaari
2012-12-15 16:21 ` Frank Schäfer
2012-12-15 16:51 ` Antti Palosaari
2012-12-16 18:15 ` Frank Schäfer
2012-12-17 1:09 ` Matthew Gyurgyik
2012-12-17 1:26 ` Antti Palosaari
2012-12-17 1:37 ` Matthew Gyurgyik
2012-12-17 9:33 ` Antti Palosaari
2012-12-17 11:08 ` Antti Palosaari
2012-12-17 11:17 ` Matthew Gyurgyik
2012-12-17 12:30 ` Antti Palosaari
2012-12-17 15:53 ` Mauro Carvalho Chehab
2012-12-17 16:14 ` Mauro Carvalho Chehab
2012-12-18 2:27 ` Matthew Gyurgyik
2012-12-18 3:08 ` Matthew Gyurgyik
2013-01-02 20:59 ` Antti Palosaari
2013-01-03 2:53 ` Matthew Gyurgyik
2013-01-20 14:40 ` Matthew Gyurgyik
2013-01-20 17:46 ` Antti Palosaari
2013-02-16 23:38 ` Matthew Gyurgyik
2013-02-24 22:23 ` Antti Palosaari
2013-02-25 1:58 ` Matthew Gyurgyik
2013-01-03 0:18 ` David Härdeman
2012-12-13 20:07 ` Mauro Carvalho Chehab
2012-12-13 20:36 ` Mauro Carvalho Chehab
2012-12-13 19:57 ` Mauro Carvalho Chehab
2012-12-13 20:04 ` Mauro Carvalho Chehab
2012-12-10 16:01 ` Matthew Gyurgyik
2012-12-06 2:32 ` Matthew Gyurgyik
2012-12-06 21:52 ` Frank Schäfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50C3B567.3070300@iki.fi \
--to=crope@iki.fi \
--cc=dheitmueller@kernellabs.com \
--cc=fschaefer.oss@googlemail.com \
--cc=linux-media@vger.kernel.org \
--cc=matthew@pyther.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.