From: b.brezillon@overkiz.com (boris brezillon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/9] ARM: at91/dt: add i2c devices connected to at91rm9200ek board
Date: Wed, 20 Nov 2013 17:17:06 +0100 [thread overview]
Message-ID: <528CE082.2000400@overkiz.com> (raw)
In-Reply-To: <20131120150132.GG14627@ns203013.ovh.net>
On 20/11/2013 16:01, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 13:08 Wed 28 Aug , Boris BREZILLON wrote:
>> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
>> ---
>> arch/arm/boot/dts/at91rm9200ek.dts | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
>> index b3e7425..fd2601a 100644
>> --- a/arch/arm/boot/dts/at91rm9200ek.dts
>> +++ b/arch/arm/boot/dts/at91rm9200ek.dts
>> @@ -147,6 +147,18 @@
>> };
>> };
>>
>> + i2c at 0 {
>> + status = "okay";
>> +
>> + ics1523 at 26 {
>> + reg = <0x26>;
>> + };
>> +
>> + dac3550 at 4d {
>> + reg = <0x4d>;
> missing compatible
I can't find any matching compatible for these devices.
Do you know what should be used ?
>> + };
>> + };
>> +
>> leds {
>> compatible = "gpio-leds";
>>
>> --
>> 1.7.9.5
>>
WARNING: multiple messages have this Message-ID (diff)
From: boris brezillon <b.brezillon@overkiz.com>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Rob Herring <rob.herring@calxeda.com>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Ian Campbell <ian.campbell@citrix.com>,
Russell King <linux@arm.linux.org.uk>,
Nicolas Ferre <nicolas.ferre@atmel.com>,
Joachim Eastwood <manabian@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 7/9] ARM: at91/dt: add i2c devices connected to at91rm9200ek board
Date: Wed, 20 Nov 2013 17:17:06 +0100 [thread overview]
Message-ID: <528CE082.2000400@overkiz.com> (raw)
In-Reply-To: <20131120150132.GG14627@ns203013.ovh.net>
On 20/11/2013 16:01, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 13:08 Wed 28 Aug , Boris BREZILLON wrote:
>> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
>> ---
>> arch/arm/boot/dts/at91rm9200ek.dts | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
>> index b3e7425..fd2601a 100644
>> --- a/arch/arm/boot/dts/at91rm9200ek.dts
>> +++ b/arch/arm/boot/dts/at91rm9200ek.dts
>> @@ -147,6 +147,18 @@
>> };
>> };
>>
>> + i2c@0 {
>> + status = "okay";
>> +
>> + ics1523@26 {
>> + reg = <0x26>;
>> + };
>> +
>> + dac3550@4d {
>> + reg = <0x4d>;
> missing compatible
I can't find any matching compatible for these devices.
Do you know what should be used ?
>> + };
>> + };
>> +
>> leds {
>> compatible = "gpio-leds";
>>
>> --
>> 1.7.9.5
>>
next prev parent reply other threads:[~2013-11-20 16:17 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-28 11:00 [PATCH 0/9] ARM: at91/dt: add missing devices to rm9200ek board Boris BREZILLON
2013-08-28 11:00 ` Boris BREZILLON
2013-08-28 11:02 ` [PATCH 1/9] ARM: at91/dt: add rm9200 spi0 chip select pins definitions Boris BREZILLON
2013-08-28 11:02 ` Boris BREZILLON
2013-11-20 14:56 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 14:56 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 14:56 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 15:59 ` boris brezillon
2013-11-20 15:59 ` boris brezillon
2013-11-20 17:05 ` boris brezillon
2013-11-20 17:05 ` boris brezillon
2013-08-28 11:03 ` [PATCH 2/9] ARM: at91/dt: add ethernet phy to at91rm9200ek board Boris BREZILLON
2013-08-28 11:03 ` Boris BREZILLON
2013-11-18 8:39 ` boris brezillon
2013-11-18 8:39 ` boris brezillon
2013-11-18 8:39 ` boris brezillon
2013-08-28 11:04 ` [PATCH 3/9] ARM: at91/dt: add usb1 vbus and pullup pins Boris BREZILLON
2013-08-28 11:04 ` Boris BREZILLON
2013-11-20 14:57 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 14:57 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 14:57 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 15:48 ` boris brezillon
2013-11-20 15:48 ` boris brezillon
2013-11-20 15:48 ` boris brezillon
2013-08-28 11:05 ` [PATCH 4/9] ARM: at91/dt: add atmel, pullup-gpio to at91rm9200ek usb1 definition Boris BREZILLON
2013-08-28 11:05 ` [PATCH 4/9] ARM: at91/dt: add atmel,pullup-gpio " Boris BREZILLON
2013-08-28 11:06 ` [PATCH 5/9] ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board Boris BREZILLON
2013-08-28 11:06 ` Boris BREZILLON
2013-11-20 14:59 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 14:59 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 14:59 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 16:14 ` boris brezillon
2013-11-20 16:14 ` boris brezillon
2013-11-20 17:20 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 17:20 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 17:20 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-21 9:48 ` Linus Walleij
2013-11-21 9:48 ` Linus Walleij
2013-11-21 10:34 ` boris brezillon
2013-11-21 10:34 ` boris brezillon
2013-11-26 13:46 ` Linus Walleij
2013-11-26 13:46 ` Linus Walleij
2013-11-26 13:46 ` Linus Walleij
2013-11-26 17:55 ` boris brezillon
2013-11-26 17:55 ` boris brezillon
2013-11-26 17:55 ` boris brezillon
[not found] ` <5294D64D.7000100@overkiz.com>
2013-11-29 10:03 ` Linus Walleij
2013-11-29 10:03 ` Linus Walleij
2013-11-29 10:30 ` boris brezillon
2013-11-29 10:30 ` boris brezillon
2013-11-29 10:30 ` boris brezillon
2013-11-29 13:31 ` Linus Walleij
2013-11-29 13:31 ` Linus Walleij
2013-11-29 15:30 ` boris brezillon
2013-11-29 15:30 ` boris brezillon
2013-12-09 10:34 ` boris brezillon
2013-12-09 10:34 ` boris brezillon
2013-12-09 10:34 ` boris brezillon
2013-12-12 17:52 ` Linus Walleij
2013-12-12 17:52 ` Linus Walleij
2013-08-28 11:07 ` [PATCH 6/9] ARM: at91/dt: add spi0 " Boris BREZILLON
2013-08-28 11:07 ` Boris BREZILLON
2013-11-20 15:00 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 15:00 ` Jean-Christophe PLAGNIOL-VILLARD
2013-08-28 11:08 ` [PATCH 7/9] ARM: at91/dt: add i2c devices connected " Boris BREZILLON
2013-08-28 11:08 ` Boris BREZILLON
2013-11-20 15:01 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 15:01 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 16:17 ` boris brezillon [this message]
2013-11-20 16:17 ` boris brezillon
2013-08-28 12:37 ` [PATCH 8/9] ARM: at91/dt: add new at91rm9200ek_mmc board Boris BREZILLON
2013-08-28 12:37 ` Boris BREZILLON
2013-11-20 15:02 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 15:02 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 15:02 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 16:31 ` boris brezillon
2013-11-20 16:31 ` boris brezillon
2013-11-20 16:31 ` boris brezillon
2013-11-20 17:27 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 17:27 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-20 17:27 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-21 8:44 ` Nicolas Ferre
2013-11-21 8:44 ` Nicolas Ferre
2013-11-21 8:44 ` Nicolas Ferre
2013-08-28 12:38 ` [PATCH 9/9] ARM: at91/dt: add new at91rm9200ek_dataflash board Boris BREZILLON
2013-08-28 12:38 ` Boris BREZILLON
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=528CE082.2000400@overkiz.com \
--to=b.brezillon@overkiz.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.