All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Zyngier <marc.zyngier@arm.com>
To: Shannon Zhao <zhaoshenglong@huawei.com>,
	kvmarm@lists.cs.columbia.edu, christoffer.dall@linaro.org
Cc: kvm@vger.kernel.org, will.deacon@arm.com,
	linux-arm-kernel@lists.infradead.org, shannon.zhao@linaro.org
Subject: Re: [PATCH v6 02/21] KVM: ARM64: Define PMU data structure for each vcpu
Date: Tue, 08 Dec 2015 13:37:14 +0000	[thread overview]
Message-ID: <5666DD0A.5060004@arm.com> (raw)
In-Reply-To: <1449578860-15808-3-git-send-email-zhaoshenglong@huawei.com>

On 08/12/15 12:47, Shannon Zhao wrote:
> From: Shannon Zhao <shannon.zhao@linaro.org>
> 
> Here we plan to support virtual PMU for guest by full software
> emulation, so define some basic structs and functions preparing for
> futher steps. Define struct kvm_pmc for performance monitor counter and
> struct kvm_pmu for performance monitor unit for each vcpu. According to
> ARMv8 spec, the PMU contains at most 32(ARMV8_MAX_COUNTERS) counters.
> 
> Since this only supports ARM64 (or PMUv3), add a separate config symbol
> for it.
> 
> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
> ---
>  arch/arm64/include/asm/kvm_host.h |  2 ++
>  arch/arm64/kvm/Kconfig            |  8 ++++++++
>  include/kvm/arm_pmu.h             | 40 +++++++++++++++++++++++++++++++++++++++
>  3 files changed, 50 insertions(+)
>  create mode 100644 include/kvm/arm_pmu.h
> 
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index a35ce72..42e15bb 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -37,6 +37,7 @@
>  
>  #include <kvm/arm_vgic.h>
>  #include <kvm/arm_arch_timer.h>
> +#include <kvm/arm_pmu.h>
>  
>  #define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS
>  
> @@ -132,6 +133,7 @@ struct kvm_vcpu_arch {
>  	/* VGIC state */
>  	struct vgic_cpu vgic_cpu;
>  	struct arch_timer_cpu timer_cpu;
> +	struct kvm_pmu pmu;
>  
>  	/*
>  	 * Anything that is not used directly from assembly code goes
> diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
> index a5272c0..66da9a2 100644
> --- a/arch/arm64/kvm/Kconfig
> +++ b/arch/arm64/kvm/Kconfig
> @@ -36,6 +36,7 @@ config KVM
>  	select HAVE_KVM_EVENTFD
>  	select HAVE_KVM_IRQFD
>  	select KVM_ARM_VGIC_V3
> +	select KVM_ARM_PMU

What if HW_PERF_EVENTS is not selected? Also, selecting HW_PERF_EVENTS
is not enough, and you probably need PERF_EVENTS as well, So this should
probably read:

	select KVM_ARM_PMU if (HW_PERF_EVENTS && PERF_EVENTS)

>  	---help---
>  	  Support hosting virtualized guest machines.
>  	  We don't support KVM with 16K page tables yet, due to the multiple
> @@ -48,6 +49,13 @@ config KVM_ARM_HOST
>  	---help---
>  	  Provides host support for ARM processors.
>  
> +config KVM_ARM_PMU
> +	bool
> +	depends on KVM_ARM_HOST && HW_PERF_EVENTS

and this line should be dropped.

> +	---help---
> +	  Adds support for a virtual Performance Monitoring Unit (PMU) in
> +	  virtual machines.
> +
>  source drivers/vhost/Kconfig
>  
>  endif # VIRTUALIZATION
> diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h
> new file mode 100644
> index 0000000..dea78f8
> --- /dev/null
> +++ b/include/kvm/arm_pmu.h
> @@ -0,0 +1,40 @@
> +/*
> + * Copyright (C) 2015 Linaro Ltd.
> + * Author: Shannon Zhao <shannon.zhao@linaro.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __ASM_ARM_KVM_PMU_H
> +#define __ASM_ARM_KVM_PMU_H
> +
> +#include <linux/perf_event.h>
> +#ifdef CONFIG_KVM_ARM_PMU
> +#include <asm/pmu.h>
> +#endif
> +
> +struct kvm_pmc {
> +	u8 idx;/* index into the pmu->pmc array */
> +	struct perf_event *perf_event;
> +	u64 bitmask;
> +};
> +
> +struct kvm_pmu {
> +#ifdef CONFIG_KVM_ARM_PMU
> +	/* PMU IRQ Number per VCPU */
> +	int irq_num;
> +	struct kvm_pmc pmc[ARMV8_MAX_COUNTERS];
> +#endif
> +};
> +
> +#endif
> 

The repetition of #ifdef CONFIG_KVM_ARM_PMU is a bit ugly. How about
something like this instead:

#ifndef __ASM_ARM_KVM_PMU_H
#define __ASM_ARM_KVM_PMU_H

#ifdef CONFIG_KVM_ARM_PMU

#include <linux/perf_event.h>
#include <asm/pmu.h>

struct kvm_pmc {
	u8 idx;/* index into the pmu->pmc array */
	struct perf_event *perf_event;
	u64 bitmask;
};

struct kvm_pmu {
	/* PMU IRQ Number per VCPU */
	int irq_num;
	struct kvm_pmc pmc[ARMV8_MAX_COUNTERS];
};

#else

struct kvm_pmu {
};

#endif

#endif

and you can then populate the rest of the function prototype and stubs
where needed.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

WARNING: multiple messages have this Message-ID (diff)
From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 02/21] KVM: ARM64: Define PMU data structure for each vcpu
Date: Tue, 08 Dec 2015 13:37:14 +0000	[thread overview]
Message-ID: <5666DD0A.5060004@arm.com> (raw)
In-Reply-To: <1449578860-15808-3-git-send-email-zhaoshenglong@huawei.com>

On 08/12/15 12:47, Shannon Zhao wrote:
> From: Shannon Zhao <shannon.zhao@linaro.org>
> 
> Here we plan to support virtual PMU for guest by full software
> emulation, so define some basic structs and functions preparing for
> futher steps. Define struct kvm_pmc for performance monitor counter and
> struct kvm_pmu for performance monitor unit for each vcpu. According to
> ARMv8 spec, the PMU contains at most 32(ARMV8_MAX_COUNTERS) counters.
> 
> Since this only supports ARM64 (or PMUv3), add a separate config symbol
> for it.
> 
> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
> ---
>  arch/arm64/include/asm/kvm_host.h |  2 ++
>  arch/arm64/kvm/Kconfig            |  8 ++++++++
>  include/kvm/arm_pmu.h             | 40 +++++++++++++++++++++++++++++++++++++++
>  3 files changed, 50 insertions(+)
>  create mode 100644 include/kvm/arm_pmu.h
> 
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index a35ce72..42e15bb 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -37,6 +37,7 @@
>  
>  #include <kvm/arm_vgic.h>
>  #include <kvm/arm_arch_timer.h>
> +#include <kvm/arm_pmu.h>
>  
>  #define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS
>  
> @@ -132,6 +133,7 @@ struct kvm_vcpu_arch {
>  	/* VGIC state */
>  	struct vgic_cpu vgic_cpu;
>  	struct arch_timer_cpu timer_cpu;
> +	struct kvm_pmu pmu;
>  
>  	/*
>  	 * Anything that is not used directly from assembly code goes
> diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
> index a5272c0..66da9a2 100644
> --- a/arch/arm64/kvm/Kconfig
> +++ b/arch/arm64/kvm/Kconfig
> @@ -36,6 +36,7 @@ config KVM
>  	select HAVE_KVM_EVENTFD
>  	select HAVE_KVM_IRQFD
>  	select KVM_ARM_VGIC_V3
> +	select KVM_ARM_PMU

What if HW_PERF_EVENTS is not selected? Also, selecting HW_PERF_EVENTS
is not enough, and you probably need PERF_EVENTS as well, So this should
probably read:

	select KVM_ARM_PMU if (HW_PERF_EVENTS && PERF_EVENTS)

>  	---help---
>  	  Support hosting virtualized guest machines.
>  	  We don't support KVM with 16K page tables yet, due to the multiple
> @@ -48,6 +49,13 @@ config KVM_ARM_HOST
>  	---help---
>  	  Provides host support for ARM processors.
>  
> +config KVM_ARM_PMU
> +	bool
> +	depends on KVM_ARM_HOST && HW_PERF_EVENTS

and this line should be dropped.

> +	---help---
> +	  Adds support for a virtual Performance Monitoring Unit (PMU) in
> +	  virtual machines.
> +
>  source drivers/vhost/Kconfig
>  
>  endif # VIRTUALIZATION
> diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h
> new file mode 100644
> index 0000000..dea78f8
> --- /dev/null
> +++ b/include/kvm/arm_pmu.h
> @@ -0,0 +1,40 @@
> +/*
> + * Copyright (C) 2015 Linaro Ltd.
> + * Author: Shannon Zhao <shannon.zhao@linaro.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __ASM_ARM_KVM_PMU_H
> +#define __ASM_ARM_KVM_PMU_H
> +
> +#include <linux/perf_event.h>
> +#ifdef CONFIG_KVM_ARM_PMU
> +#include <asm/pmu.h>
> +#endif
> +
> +struct kvm_pmc {
> +	u8 idx;/* index into the pmu->pmc array */
> +	struct perf_event *perf_event;
> +	u64 bitmask;
> +};
> +
> +struct kvm_pmu {
> +#ifdef CONFIG_KVM_ARM_PMU
> +	/* PMU IRQ Number per VCPU */
> +	int irq_num;
> +	struct kvm_pmc pmc[ARMV8_MAX_COUNTERS];
> +#endif
> +};
> +
> +#endif
> 

The repetition of #ifdef CONFIG_KVM_ARM_PMU is a bit ugly. How about
something like this instead:

#ifndef __ASM_ARM_KVM_PMU_H
#define __ASM_ARM_KVM_PMU_H

#ifdef CONFIG_KVM_ARM_PMU

#include <linux/perf_event.h>
#include <asm/pmu.h>

struct kvm_pmc {
	u8 idx;/* index into the pmu->pmc array */
	struct perf_event *perf_event;
	u64 bitmask;
};

struct kvm_pmu {
	/* PMU IRQ Number per VCPU */
	int irq_num;
	struct kvm_pmc pmc[ARMV8_MAX_COUNTERS];
};

#else

struct kvm_pmu {
};

#endif

#endif

and you can then populate the rest of the function prototype and stubs
where needed.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

  reply	other threads:[~2015-12-08 13:35 UTC|newest]

Thread overview: 126+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-08 12:47 [PATCH v6 00/21] KVM: ARM64: Add guest PMU support Shannon Zhao
2015-12-08 12:47 ` Shannon Zhao
2015-12-08 12:47 ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 01/21] ARM64: Move PMU register related defines to asm/pmu.h Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 02/21] KVM: ARM64: Define PMU data structure for each vcpu Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 13:37   ` Marc Zyngier [this message]
2015-12-08 13:37     ` Marc Zyngier
2015-12-08 13:53     ` Will Deacon
2015-12-08 13:53       ` Will Deacon
2015-12-08 14:10       ` Marc Zyngier
2015-12-08 14:10         ` Marc Zyngier
2015-12-08 14:14         ` Shannon Zhao
2015-12-08 14:14           ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 03/21] KVM: ARM64: Add offset defines for PMU registers Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 04/21] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 05/21] KVM: ARM64: Add reset and access handlers for PMSELR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 06/21] KVM: ARM64: Add reset and access handlers for PMCEID0 and PMCEID1 register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 14:23   ` Marc Zyngier
2015-12-08 14:23     ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 07/21] KVM: ARM64: PMU: Add perf event map and introduce perf event creating function Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 15:43   ` Marc Zyngier
2015-12-08 15:43     ` Marc Zyngier
2015-12-09  7:38     ` Shannon Zhao
2015-12-09  7:38       ` Shannon Zhao
2015-12-09  7:38       ` Shannon Zhao
2015-12-09  8:23       ` Marc Zyngier
2015-12-09  8:23         ` Marc Zyngier
2015-12-09  8:23         ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 08/21] KVM: ARM64: Add access handler for PMEVTYPERn and PMCCFILTR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 16:17   ` Marc Zyngier
2015-12-08 16:17     ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 09/21] KVM: ARM64: Add access handler for PMXEVTYPER register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 10/21] KVM: ARM64: Add access handler for PMEVCNTRn and PMCCNTR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 16:30   ` Marc Zyngier
2015-12-08 16:30     ` Marc Zyngier
2015-12-10 11:36     ` Shannon Zhao
2015-12-10 11:36       ` Shannon Zhao
2015-12-10 11:36       ` Shannon Zhao
2015-12-10 12:07       ` Marc Zyngier
2015-12-10 12:07         ` Marc Zyngier
2015-12-10 13:23         ` Shannon Zhao
2015-12-10 13:23           ` Shannon Zhao
2015-12-10 13:23           ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 11/21] KVM: ARM64: Add access handler for PMXEVCNTR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 16:33   ` Marc Zyngier
2015-12-08 16:33     ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 12/21] KVM: ARM64: Add reset and access handlers for PMCNTENSET and PMCNTENCLR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 16:42   ` Marc Zyngier
2015-12-08 16:42     ` Marc Zyngier
2015-12-09  8:35     ` Shannon Zhao
2015-12-09  8:35       ` Shannon Zhao
2015-12-09  8:35       ` Shannon Zhao
2015-12-09  8:56       ` Marc Zyngier
2015-12-09  8:56         ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 13/21] KVM: ARM64: Add reset and access handlers for PMINTENSET and PMINTENCLR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 14/21] KVM: ARM64: Add reset and access handlers for PMOVSSET and PMOVSCLR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 16:59   ` Marc Zyngier
2015-12-08 16:59     ` Marc Zyngier
2015-12-09  8:47     ` Shannon Zhao
2015-12-09  8:47       ` Shannon Zhao
2015-12-09  8:47       ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 15/21] KVM: ARM64: Add reset and access handlers for PMUSERENR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 17:03   ` Marc Zyngier
2015-12-08 17:03     ` Marc Zyngier
2015-12-09  9:18     ` Shannon Zhao
2015-12-09  9:18       ` Shannon Zhao
2015-12-09  9:18       ` Shannon Zhao
2015-12-09  9:49       ` Marc Zyngier
2015-12-09  9:49         ` Marc Zyngier
2015-12-09  9:49         ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 16/21] KVM: ARM64: Add reset and access handlers for PMSWINC register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 17/21] KVM: ARM64: Add helper to handle PMCR register bits Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 17:36   ` Marc Zyngier
2015-12-08 17:36     ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 18/21] KVM: ARM64: Add PMU overflow interrupt routing Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 17:37   ` Marc Zyngier
2015-12-08 17:37     ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 19/21] KVM: ARM64: Reset PMU state when resetting vcpu Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 20/21] KVM: ARM64: Free perf event of PMU when destroying vcpu Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 21/21] KVM: ARM64: Add a new kvm ARM PMU device Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 17:43   ` Marc Zyngier
2015-12-08 17:43     ` Marc Zyngier
2015-12-08 17:56 ` [PATCH v6 00/21] KVM: ARM64: Add guest PMU support Marc Zyngier
2015-12-08 17:56   ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5666DD0A.5060004@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=christoffer.dall@linaro.org \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=shannon.zhao@linaro.org \
    --cc=will.deacon@arm.com \
    --cc=zhaoshenglong@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.