All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Zyngier <marc.zyngier@arm.com>
To: Shannon Zhao <zhaoshenglong@huawei.com>,
	kvmarm@lists.cs.columbia.edu, christoffer.dall@linaro.org
Cc: linux-arm-kernel@lists.infradead.org, kvm@vger.kernel.org,
	will.deacon@arm.com, alex.bennee@linaro.org, wei@redhat.com,
	cov@codeaurora.org, shannon.zhao@linaro.org,
	peter.huangpeng@huawei.com, hangaohuai@huawei.com
Subject: Re: [PATCH v6 07/21] KVM: ARM64: PMU: Add perf event map and introduce perf event creating function
Date: Tue, 08 Dec 2015 15:43:50 +0000	[thread overview]
Message-ID: <5666FAB6.4070903@arm.com> (raw)
In-Reply-To: <1449578860-15808-8-git-send-email-zhaoshenglong@huawei.com>

On 08/12/15 12:47, Shannon Zhao wrote:
> From: Shannon Zhao <shannon.zhao@linaro.org>
> 
> When we use tools like perf on host, perf passes the event type and the
> id of this event type category to kernel, then kernel will map them to
> hardware event number and write this number to PMU PMEVTYPER<n>_EL0
> register. When getting the event number in KVM, directly use raw event
> type to create a perf_event for it.
> 
> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
> ---
>  arch/arm64/include/asm/pmu.h |   2 +
>  arch/arm64/kvm/Makefile      |   1 +
>  include/kvm/arm_pmu.h        |  13 ++++
>  virt/kvm/arm/pmu.c           | 138 +++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 154 insertions(+)
>  create mode 100644 virt/kvm/arm/pmu.c
> 
> diff --git a/arch/arm64/include/asm/pmu.h b/arch/arm64/include/asm/pmu.h
> index 4264ea0..e3cb6b3 100644
> --- a/arch/arm64/include/asm/pmu.h
> +++ b/arch/arm64/include/asm/pmu.h
> @@ -28,6 +28,8 @@
>  #define ARMV8_PMCR_D		(1 << 3) /* CCNT counts every 64th cpu cycle */
>  #define ARMV8_PMCR_X		(1 << 4) /* Export to ETM */
>  #define ARMV8_PMCR_DP		(1 << 5) /* Disable CCNT if non-invasive debug*/
> +/* Determines which PMCCNTR_EL0 bit generates an overflow */
> +#define ARMV8_PMCR_LC		(1 << 6)
>  #define	ARMV8_PMCR_N_SHIFT	11	 /* Number of counters supported */
>  #define	ARMV8_PMCR_N_MASK	0x1f
>  #define	ARMV8_PMCR_MASK		0x3f	 /* Mask for writable bits */
> diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile
> index 1949fe5..18d56d8 100644
> --- a/arch/arm64/kvm/Makefile
> +++ b/arch/arm64/kvm/Makefile
> @@ -27,3 +27,4 @@ kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic-v3.o
>  kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic-v3-emul.o
>  kvm-$(CONFIG_KVM_ARM_HOST) += vgic-v3-switch.o
>  kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/arch_timer.o
> +kvm-$(CONFIG_KVM_ARM_PMU) += $(KVM)/arm/pmu.o
> diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h
> index dea78f8..36bde48 100644
> --- a/include/kvm/arm_pmu.h
> +++ b/include/kvm/arm_pmu.h
> @@ -37,4 +37,17 @@ struct kvm_pmu {
>  #endif
>  };
>  
> +#ifdef CONFIG_KVM_ARM_PMU
> +u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u32 select_idx);
> +void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u32 data,
> +				    u32 select_idx);
> +#else
> +u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u32 select_idx)
> +{
> +	return 0;
> +}
> +void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u32 data,
> +				    u32 select_idx) {}
> +#endif
> +
>  #endif
> diff --git a/virt/kvm/arm/pmu.c b/virt/kvm/arm/pmu.c
> new file mode 100644
> index 0000000..15babf1
> --- /dev/null
> +++ b/virt/kvm/arm/pmu.c
> @@ -0,0 +1,138 @@
> +/*
> + * Copyright (C) 2015 Linaro Ltd.
> + * Author: Shannon Zhao <shannon.zhao@linaro.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/cpu.h>
> +#include <linux/kvm.h>
> +#include <linux/kvm_host.h>
> +#include <linux/perf_event.h>
> +#include <asm/kvm_emulate.h>
> +#include <kvm/arm_pmu.h>
> +
> +/**
> + * kvm_pmu_get_counter_value - get PMU counter value
> + * @vcpu: The vcpu pointer
> + * @select_idx: The counter index
> + */
> +u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u32 select_idx)
> +{
> +	u64 counter, enabled, running;
> +	struct kvm_pmu *pmu = &vcpu->arch.pmu;
> +	struct kvm_pmc *pmc = &pmu->pmc[select_idx];
> +
> +	if (!vcpu_mode_is_32bit(vcpu))
> +		counter = vcpu_sys_reg(vcpu, PMEVCNTR0_EL0 + select_idx);
> +	else
> +		counter = vcpu_cp15(vcpu, c14_PMEVCNTR0 + select_idx);
> +
> +	if (pmc->perf_event)
> +		counter += perf_event_read_value(pmc->perf_event, &enabled,
> +						 &running);
> +
> +	return counter & pmc->bitmask;

This one confused me for a while. Is it the case that you return
whatever is in the vcpu view of the counter, plus anything that perf
itself has counted? If so, I'd appreciate a comment here...

> +}
> +
> +static bool kvm_pmu_counter_is_enabled(struct kvm_vcpu *vcpu, u32 select_idx)
> +{
> +	if (!vcpu_mode_is_32bit(vcpu))
> +		return (vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMCR_E) &
> +		       (vcpu_sys_reg(vcpu, PMCNTENSET_EL0) >> select_idx);

This looks wrong. Shouldn't it be:

return ((vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMCR_E) &&
        (vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & (1 << select_idx)));

> +	else
> +		return (vcpu_sys_reg(vcpu, c9_PMCR) & ARMV8_PMCR_E) &
> +		       (vcpu_sys_reg(vcpu, c9_PMCNTENSET) >> select_idx);
> +}

Also, I don't really see why we need to check the 32bit version, which
has the exact same content.

> +
> +static inline struct kvm_vcpu *kvm_pmc_to_vcpu(struct kvm_pmc *pmc)
> +{
> +	struct kvm_pmu *pmu;
> +	struct kvm_vcpu_arch *vcpu_arch;
> +
> +	pmc -= pmc->idx;
> +	pmu = container_of(pmc, struct kvm_pmu, pmc[0]);
> +	vcpu_arch = container_of(pmu, struct kvm_vcpu_arch, pmu);
> +	return container_of(vcpu_arch, struct kvm_vcpu, arch);
> +}
> +
> +/**
> + * kvm_pmu_stop_counter - stop PMU counter
> + * @pmc: The PMU counter pointer
> + *
> + * If this counter has been configured to monitor some event, release it here.
> + */
> +static void kvm_pmu_stop_counter(struct kvm_pmc *pmc)
> +{
> +	struct kvm_vcpu *vcpu = kvm_pmc_to_vcpu(pmc);
> +	u64 counter;
> +
> +	if (pmc->perf_event) {
> +		counter = kvm_pmu_get_counter_value(vcpu, pmc->idx);
> +		if (!vcpu_mode_is_32bit(vcpu))
> +			vcpu_sys_reg(vcpu, PMEVCNTR0_EL0 + pmc->idx) = counter;
> +		else
> +			vcpu_cp15(vcpu, c14_PMEVCNTR0 + pmc->idx) = counter;

Same thing - we don't need to make a difference between 32 and 64bit.

> +
> +		perf_event_release_kernel(pmc->perf_event);
> +		pmc->perf_event = NULL;
> +	}
> +}
> +
> +/**
> + * kvm_pmu_set_counter_event_type - set selected counter to monitor some event
> + * @vcpu: The vcpu pointer
> + * @data: The data guest writes to PMXEVTYPER_EL0
> + * @select_idx: The number of selected counter
> + *
> + * When OS accesses PMXEVTYPER_EL0, that means it wants to set a PMC to count an
> + * event with given hardware event number. Here we call perf_event API to
> + * emulate this action and create a kernel perf event for it.
> + */
> +void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u32 data,
> +				    u32 select_idx)
> +{
> +	struct kvm_pmu *pmu = &vcpu->arch.pmu;
> +	struct kvm_pmc *pmc = &pmu->pmc[select_idx];
> +	struct perf_event *event;
> +	struct perf_event_attr attr;
> +	u32 eventsel;
> +	u64 counter;
> +
> +	kvm_pmu_stop_counter(pmc);

Wait. I didn't realize this before, but you have the vcpu right here.
Why don't you pass it as a parameter to kvm_pmu_stop_counter and avoid
the kvm_pmc_to_vcpu thing altogether?

> +	eventsel = data & ARMV8_EVTYPE_EVENT;
> +
> +	memset(&attr, 0, sizeof(struct perf_event_attr));
> +	attr.type = PERF_TYPE_RAW;
> +	attr.size = sizeof(attr);
> +	attr.pinned = 1;
> +	attr.disabled = kvm_pmu_counter_is_enabled(vcpu, select_idx);
> +	attr.exclude_user = data & ARMV8_EXCLUDE_EL0 ? 1 : 0;
> +	attr.exclude_kernel = data & ARMV8_EXCLUDE_EL1 ? 1 : 0;
> +	attr.exclude_hv = 1; /* Don't count EL2 events */
> +	attr.exclude_host = 1; /* Don't count host events */
> +	attr.config = eventsel;
> +
> +	counter = kvm_pmu_get_counter_value(vcpu, select_idx);
> +	/* The initial sample period (overflow count) of an event. */
> +	attr.sample_period = (-counter) & pmc->bitmask;
> +
> +	event = perf_event_create_kernel_counter(&attr, -1, current, NULL, pmc);
> +	if (IS_ERR(event)) {
> +		printk_once("kvm: pmu event creation failed %ld\n",
> +			    PTR_ERR(event));
> +		return;
> +	}
> +
> +	pmc->perf_event = event;
> +}
> 

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

WARNING: multiple messages have this Message-ID (diff)
From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 07/21] KVM: ARM64: PMU: Add perf event map and introduce perf event creating function
Date: Tue, 08 Dec 2015 15:43:50 +0000	[thread overview]
Message-ID: <5666FAB6.4070903@arm.com> (raw)
In-Reply-To: <1449578860-15808-8-git-send-email-zhaoshenglong@huawei.com>

On 08/12/15 12:47, Shannon Zhao wrote:
> From: Shannon Zhao <shannon.zhao@linaro.org>
> 
> When we use tools like perf on host, perf passes the event type and the
> id of this event type category to kernel, then kernel will map them to
> hardware event number and write this number to PMU PMEVTYPER<n>_EL0
> register. When getting the event number in KVM, directly use raw event
> type to create a perf_event for it.
> 
> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
> ---
>  arch/arm64/include/asm/pmu.h |   2 +
>  arch/arm64/kvm/Makefile      |   1 +
>  include/kvm/arm_pmu.h        |  13 ++++
>  virt/kvm/arm/pmu.c           | 138 +++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 154 insertions(+)
>  create mode 100644 virt/kvm/arm/pmu.c
> 
> diff --git a/arch/arm64/include/asm/pmu.h b/arch/arm64/include/asm/pmu.h
> index 4264ea0..e3cb6b3 100644
> --- a/arch/arm64/include/asm/pmu.h
> +++ b/arch/arm64/include/asm/pmu.h
> @@ -28,6 +28,8 @@
>  #define ARMV8_PMCR_D		(1 << 3) /* CCNT counts every 64th cpu cycle */
>  #define ARMV8_PMCR_X		(1 << 4) /* Export to ETM */
>  #define ARMV8_PMCR_DP		(1 << 5) /* Disable CCNT if non-invasive debug*/
> +/* Determines which PMCCNTR_EL0 bit generates an overflow */
> +#define ARMV8_PMCR_LC		(1 << 6)
>  #define	ARMV8_PMCR_N_SHIFT	11	 /* Number of counters supported */
>  #define	ARMV8_PMCR_N_MASK	0x1f
>  #define	ARMV8_PMCR_MASK		0x3f	 /* Mask for writable bits */
> diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile
> index 1949fe5..18d56d8 100644
> --- a/arch/arm64/kvm/Makefile
> +++ b/arch/arm64/kvm/Makefile
> @@ -27,3 +27,4 @@ kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic-v3.o
>  kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic-v3-emul.o
>  kvm-$(CONFIG_KVM_ARM_HOST) += vgic-v3-switch.o
>  kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/arch_timer.o
> +kvm-$(CONFIG_KVM_ARM_PMU) += $(KVM)/arm/pmu.o
> diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h
> index dea78f8..36bde48 100644
> --- a/include/kvm/arm_pmu.h
> +++ b/include/kvm/arm_pmu.h
> @@ -37,4 +37,17 @@ struct kvm_pmu {
>  #endif
>  };
>  
> +#ifdef CONFIG_KVM_ARM_PMU
> +u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u32 select_idx);
> +void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u32 data,
> +				    u32 select_idx);
> +#else
> +u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u32 select_idx)
> +{
> +	return 0;
> +}
> +void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u32 data,
> +				    u32 select_idx) {}
> +#endif
> +
>  #endif
> diff --git a/virt/kvm/arm/pmu.c b/virt/kvm/arm/pmu.c
> new file mode 100644
> index 0000000..15babf1
> --- /dev/null
> +++ b/virt/kvm/arm/pmu.c
> @@ -0,0 +1,138 @@
> +/*
> + * Copyright (C) 2015 Linaro Ltd.
> + * Author: Shannon Zhao <shannon.zhao@linaro.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/cpu.h>
> +#include <linux/kvm.h>
> +#include <linux/kvm_host.h>
> +#include <linux/perf_event.h>
> +#include <asm/kvm_emulate.h>
> +#include <kvm/arm_pmu.h>
> +
> +/**
> + * kvm_pmu_get_counter_value - get PMU counter value
> + * @vcpu: The vcpu pointer
> + * @select_idx: The counter index
> + */
> +u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u32 select_idx)
> +{
> +	u64 counter, enabled, running;
> +	struct kvm_pmu *pmu = &vcpu->arch.pmu;
> +	struct kvm_pmc *pmc = &pmu->pmc[select_idx];
> +
> +	if (!vcpu_mode_is_32bit(vcpu))
> +		counter = vcpu_sys_reg(vcpu, PMEVCNTR0_EL0 + select_idx);
> +	else
> +		counter = vcpu_cp15(vcpu, c14_PMEVCNTR0 + select_idx);
> +
> +	if (pmc->perf_event)
> +		counter += perf_event_read_value(pmc->perf_event, &enabled,
> +						 &running);
> +
> +	return counter & pmc->bitmask;

This one confused me for a while. Is it the case that you return
whatever is in the vcpu view of the counter, plus anything that perf
itself has counted? If so, I'd appreciate a comment here...

> +}
> +
> +static bool kvm_pmu_counter_is_enabled(struct kvm_vcpu *vcpu, u32 select_idx)
> +{
> +	if (!vcpu_mode_is_32bit(vcpu))
> +		return (vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMCR_E) &
> +		       (vcpu_sys_reg(vcpu, PMCNTENSET_EL0) >> select_idx);

This looks wrong. Shouldn't it be:

return ((vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMCR_E) &&
        (vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & (1 << select_idx)));

> +	else
> +		return (vcpu_sys_reg(vcpu, c9_PMCR) & ARMV8_PMCR_E) &
> +		       (vcpu_sys_reg(vcpu, c9_PMCNTENSET) >> select_idx);
> +}

Also, I don't really see why we need to check the 32bit version, which
has the exact same content.

> +
> +static inline struct kvm_vcpu *kvm_pmc_to_vcpu(struct kvm_pmc *pmc)
> +{
> +	struct kvm_pmu *pmu;
> +	struct kvm_vcpu_arch *vcpu_arch;
> +
> +	pmc -= pmc->idx;
> +	pmu = container_of(pmc, struct kvm_pmu, pmc[0]);
> +	vcpu_arch = container_of(pmu, struct kvm_vcpu_arch, pmu);
> +	return container_of(vcpu_arch, struct kvm_vcpu, arch);
> +}
> +
> +/**
> + * kvm_pmu_stop_counter - stop PMU counter
> + * @pmc: The PMU counter pointer
> + *
> + * If this counter has been configured to monitor some event, release it here.
> + */
> +static void kvm_pmu_stop_counter(struct kvm_pmc *pmc)
> +{
> +	struct kvm_vcpu *vcpu = kvm_pmc_to_vcpu(pmc);
> +	u64 counter;
> +
> +	if (pmc->perf_event) {
> +		counter = kvm_pmu_get_counter_value(vcpu, pmc->idx);
> +		if (!vcpu_mode_is_32bit(vcpu))
> +			vcpu_sys_reg(vcpu, PMEVCNTR0_EL0 + pmc->idx) = counter;
> +		else
> +			vcpu_cp15(vcpu, c14_PMEVCNTR0 + pmc->idx) = counter;

Same thing - we don't need to make a difference between 32 and 64bit.

> +
> +		perf_event_release_kernel(pmc->perf_event);
> +		pmc->perf_event = NULL;
> +	}
> +}
> +
> +/**
> + * kvm_pmu_set_counter_event_type - set selected counter to monitor some event
> + * @vcpu: The vcpu pointer
> + * @data: The data guest writes to PMXEVTYPER_EL0
> + * @select_idx: The number of selected counter
> + *
> + * When OS accesses PMXEVTYPER_EL0, that means it wants to set a PMC to count an
> + * event with given hardware event number. Here we call perf_event API to
> + * emulate this action and create a kernel perf event for it.
> + */
> +void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u32 data,
> +				    u32 select_idx)
> +{
> +	struct kvm_pmu *pmu = &vcpu->arch.pmu;
> +	struct kvm_pmc *pmc = &pmu->pmc[select_idx];
> +	struct perf_event *event;
> +	struct perf_event_attr attr;
> +	u32 eventsel;
> +	u64 counter;
> +
> +	kvm_pmu_stop_counter(pmc);

Wait. I didn't realize this before, but you have the vcpu right here.
Why don't you pass it as a parameter to kvm_pmu_stop_counter and avoid
the kvm_pmc_to_vcpu thing altogether?

> +	eventsel = data & ARMV8_EVTYPE_EVENT;
> +
> +	memset(&attr, 0, sizeof(struct perf_event_attr));
> +	attr.type = PERF_TYPE_RAW;
> +	attr.size = sizeof(attr);
> +	attr.pinned = 1;
> +	attr.disabled = kvm_pmu_counter_is_enabled(vcpu, select_idx);
> +	attr.exclude_user = data & ARMV8_EXCLUDE_EL0 ? 1 : 0;
> +	attr.exclude_kernel = data & ARMV8_EXCLUDE_EL1 ? 1 : 0;
> +	attr.exclude_hv = 1; /* Don't count EL2 events */
> +	attr.exclude_host = 1; /* Don't count host events */
> +	attr.config = eventsel;
> +
> +	counter = kvm_pmu_get_counter_value(vcpu, select_idx);
> +	/* The initial sample period (overflow count) of an event. */
> +	attr.sample_period = (-counter) & pmc->bitmask;
> +
> +	event = perf_event_create_kernel_counter(&attr, -1, current, NULL, pmc);
> +	if (IS_ERR(event)) {
> +		printk_once("kvm: pmu event creation failed %ld\n",
> +			    PTR_ERR(event));
> +		return;
> +	}
> +
> +	pmc->perf_event = event;
> +}
> 

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

  reply	other threads:[~2015-12-08 15:43 UTC|newest]

Thread overview: 126+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-08 12:47 [PATCH v6 00/21] KVM: ARM64: Add guest PMU support Shannon Zhao
2015-12-08 12:47 ` Shannon Zhao
2015-12-08 12:47 ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 01/21] ARM64: Move PMU register related defines to asm/pmu.h Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 02/21] KVM: ARM64: Define PMU data structure for each vcpu Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 13:37   ` Marc Zyngier
2015-12-08 13:37     ` Marc Zyngier
2015-12-08 13:53     ` Will Deacon
2015-12-08 13:53       ` Will Deacon
2015-12-08 14:10       ` Marc Zyngier
2015-12-08 14:10         ` Marc Zyngier
2015-12-08 14:14         ` Shannon Zhao
2015-12-08 14:14           ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 03/21] KVM: ARM64: Add offset defines for PMU registers Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 04/21] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 05/21] KVM: ARM64: Add reset and access handlers for PMSELR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 06/21] KVM: ARM64: Add reset and access handlers for PMCEID0 and PMCEID1 register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 14:23   ` Marc Zyngier
2015-12-08 14:23     ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 07/21] KVM: ARM64: PMU: Add perf event map and introduce perf event creating function Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 15:43   ` Marc Zyngier [this message]
2015-12-08 15:43     ` Marc Zyngier
2015-12-09  7:38     ` Shannon Zhao
2015-12-09  7:38       ` Shannon Zhao
2015-12-09  7:38       ` Shannon Zhao
2015-12-09  8:23       ` Marc Zyngier
2015-12-09  8:23         ` Marc Zyngier
2015-12-09  8:23         ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 08/21] KVM: ARM64: Add access handler for PMEVTYPERn and PMCCFILTR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 16:17   ` Marc Zyngier
2015-12-08 16:17     ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 09/21] KVM: ARM64: Add access handler for PMXEVTYPER register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 10/21] KVM: ARM64: Add access handler for PMEVCNTRn and PMCCNTR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 16:30   ` Marc Zyngier
2015-12-08 16:30     ` Marc Zyngier
2015-12-10 11:36     ` Shannon Zhao
2015-12-10 11:36       ` Shannon Zhao
2015-12-10 11:36       ` Shannon Zhao
2015-12-10 12:07       ` Marc Zyngier
2015-12-10 12:07         ` Marc Zyngier
2015-12-10 13:23         ` Shannon Zhao
2015-12-10 13:23           ` Shannon Zhao
2015-12-10 13:23           ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 11/21] KVM: ARM64: Add access handler for PMXEVCNTR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 16:33   ` Marc Zyngier
2015-12-08 16:33     ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 12/21] KVM: ARM64: Add reset and access handlers for PMCNTENSET and PMCNTENCLR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 16:42   ` Marc Zyngier
2015-12-08 16:42     ` Marc Zyngier
2015-12-09  8:35     ` Shannon Zhao
2015-12-09  8:35       ` Shannon Zhao
2015-12-09  8:35       ` Shannon Zhao
2015-12-09  8:56       ` Marc Zyngier
2015-12-09  8:56         ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 13/21] KVM: ARM64: Add reset and access handlers for PMINTENSET and PMINTENCLR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 14/21] KVM: ARM64: Add reset and access handlers for PMOVSSET and PMOVSCLR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 16:59   ` Marc Zyngier
2015-12-08 16:59     ` Marc Zyngier
2015-12-09  8:47     ` Shannon Zhao
2015-12-09  8:47       ` Shannon Zhao
2015-12-09  8:47       ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 15/21] KVM: ARM64: Add reset and access handlers for PMUSERENR register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 17:03   ` Marc Zyngier
2015-12-08 17:03     ` Marc Zyngier
2015-12-09  9:18     ` Shannon Zhao
2015-12-09  9:18       ` Shannon Zhao
2015-12-09  9:18       ` Shannon Zhao
2015-12-09  9:49       ` Marc Zyngier
2015-12-09  9:49         ` Marc Zyngier
2015-12-09  9:49         ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 16/21] KVM: ARM64: Add reset and access handlers for PMSWINC register Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 17/21] KVM: ARM64: Add helper to handle PMCR register bits Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 17:36   ` Marc Zyngier
2015-12-08 17:36     ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 18/21] KVM: ARM64: Add PMU overflow interrupt routing Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 17:37   ` Marc Zyngier
2015-12-08 17:37     ` Marc Zyngier
2015-12-08 12:47 ` [PATCH v6 19/21] KVM: ARM64: Reset PMU state when resetting vcpu Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 20/21] KVM: ARM64: Free perf event of PMU when destroying vcpu Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47 ` [PATCH v6 21/21] KVM: ARM64: Add a new kvm ARM PMU device Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 12:47   ` Shannon Zhao
2015-12-08 17:43   ` Marc Zyngier
2015-12-08 17:43     ` Marc Zyngier
2015-12-08 17:56 ` [PATCH v6 00/21] KVM: ARM64: Add guest PMU support Marc Zyngier
2015-12-08 17:56   ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5666FAB6.4070903@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=alex.bennee@linaro.org \
    --cc=christoffer.dall@linaro.org \
    --cc=cov@codeaurora.org \
    --cc=hangaohuai@huawei.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=peter.huangpeng@huawei.com \
    --cc=shannon.zhao@linaro.org \
    --cc=wei@redhat.com \
    --cc=will.deacon@arm.com \
    --cc=zhaoshenglong@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.